Absenteísmo por motivos odontológico e médico nos serviços público e privado

O absenteísmo é um assunto de interesse crescente devido ao atual contexto econômico de competitividade, que faz com que as empresas procurem meios para diminuir sua ocorrência, aumentando a rentabilidade e com isso crescendo de forma sustentada. Procurou-se estudar o absenteísmo por razões odontológicas e médicas, nos serviços público e privado, analisando se a idade, o sexo e a função do trabalhador, além do regime empregatício, interferem na sua ocorrência. Desenvolveu-se o estudo na prefeitura do município de Araçatuba, São Paulo, Brasil, e em uma indústria acrílica. Para a coleta dos dados, analisaram-se todos os atestados odontológicos e médicos, que deram entrada nas empresas no período de janeiro a junho de 2002 e as listagens dos trabalhadores. Verificou-se que a falta por motivos odontológicos tiveram pouco peso sobre o total de faltas por motivo de doença, além de provocarem o afastamento do trabalhador por um período menor. As variáveis idade, sexo, função e regime empregatício influenciaram na ocorrência do absenteísmo ao trabalho. A disponibilidade dessas informações deverá ser muito importante, pois, visto as inúmeras variáveis envolvidas, facilitarão a tomada de decisões das distintas estratégias para sua prevenção.

A saúde bucal em pauta: análise de registros dos Conselhos Municipais de Saúde de municípios pertencentes à 17ª Regional de Saúde do Estado do Paraná, Brasil

O presente estudo teve como objetivo a análise das intervenções em saúde bucal, registradas em atas de reuniões, de 15 Conselhos Municipais de Saúde, próprios de municípios pertencentes à 17ª Regional de Saúde do Estado do Paraná. A análise documental deu-se a partir da identificação das temáticas em saúde, com ênfase na categorização por assunto das intervenções em saúde bucal. Os resultados evidenciaram os registros relativos à programação e organização da prestação de serviços, seguida pelo orçamento em saúde, como sendo os mais freqüentes do conjunto de temáticas analisadas. Pôde-se identificar, em 90 atas das 591 estudadas, o total de 134 registros de intervenções em saúde bucal. Por meio da análise desses últimos, percebeu-se que as intervenções em saúde bucal eram relatos de ações já concretizadas, desprovidas de características propositivas quando analisadas sob a dimensão do planejamento em saúde. Sinaliza-se para a necessidade da categoria odontológica de adquirir um maior padrão de representatividade nesses espaços, de forma a possibilitar vínculos importantes no processo de planejamento e de fortalecimento da saúde bucal enquanto direito de cidadania.

Dental students' knowledge of ergonomic postural requirements and their application during clinical care

Aim:To examine how much final-year undergraduate dental students know about postural dental ergonomic requirements, and how well they apply these requirements clinically.Background:Dentists are vulnerable to diverse mechanical (e.g. postural) and non-mechanical occupational risks.Materials and Methods:Eight postural requirements found in normalising documents were identified, reproduced, photographed, and analysed to develop a test of visual perception (TVP). Photographs of the 69 participating students were taken during their clinical care to ascertain ergonomics compliance, after which the students were administered the TVP. Pearson's test was used to correlate the level of knowledge (TVP) and its clinical application (photographic analysis) among the 552 observations made for each test (total of 1104 observations).Results:65.7% of the TVP questions were answered correctly and 35% of the photographic cases were in compliance with ergonomic requirements (+ 0.67, P < 0.0001).Conclusion:The knowledge of ergonomics postural requirements and their clinical application among the dental students surveyed were not satisfactory. The reasons for the learning difficulties encountered by the students should be identified to improve the learning process. The didactic use of digital images in this study may help in this endeavour.

Dentistry in Brazil: Its History and Current Trends

The objectives of this article are to provide a short history of dentistry and dental education in Brazil and to analyze the nature of its development to date. The databases consulted are those provided by the Brazilian Federal Council of Dentistry, Brazilian Ministry of Health, Brazilian Ministry of Education, National Institute of Studies and Educational Research Anisio Teixeira, and Brazilian Institute of Geography and Statistics. Formal dental education in Brazil started in the late nineteenth century with the creation of courses annexed to existing schools of medicine in Rio de Janeiro and Bahia. Today, there are 191 institutions of higher education nationwide granting degrees in dentistry (137 private [71.7 percent] and fifty-four public [28.3 percent]), with a total of 17,157 student positions offered annually. These schools graduate around 10,000 professionals per year-one of the highest rates in the world. Both the distribution of schools of dentistry and of dentists varies among the regions of the country, with the greatest concentrations in major metropolitan centers with high population density, resulting in limited coverage in the more deprived regions. A review of epidemiological data for oral health and distribution of dentists in Brazil indicates that there is a lack of systematic planning for the allocation of the dental workforce and a lack of consideration of regional needs in the development of dental training programs in Brazil today.

A importância da interação entre odontopediatrias e pediatrias no manejo de dentes natais e neonatais

OBJETIVO: Apresentar revisão de literatura sobre dentes natais e neonatais, abordando características clínicas, fatores etiológicos, medidas terapêuticas e a importância do conhecimento desta anomalia, por odontopediatras e pediatras. FONTES DE DADOS: Foram selecionados os artigos mais relevantes sobre o tema, desde 1950 até 2006, pesquisados no Medline e na Bibliografia Brasileira em Odontologia (BBO), além de livros de pertinentes. SÍNTESE DOS DADOS: Os dentes natais e neonatais consistem em uma anomalia de erupção, sendo caracterizados por seu irrompimento na cavidade oral durante o período intra-uterino ou no primeiro mês de vida respectivamente, podendo fazer parte da dentição decídua normal ou supranumerária. Esses dentes, em geral, apresentam bordos cortantes e podem estar relacionados ao aparecimento de ulcerações na base da língua do bebê e/ou no seio materno, comprometendo a amamentação. A fraca implantação óssea desses dentes favorece sua grande mobilidade, tornando-se, assim, um fator de risco à sua aspiração ou deglutição pela criança. A abordagem terapêutica depende da dentição à qual pertence o dente e dos possíveis problemas que este pode causar à saúde da criança ou da mãe. CONCLUSÕES: O conhecimento sobre as características clínicas e os possíveis distúrbios aos quais os dentes natais e neonatais estão relacionados por odontopediatras e pediatras possibilita a interação necessária para o diagnóstico precoce e a abordagem integral da criança.

Staphylococcus Aureus Contamination in a Pediatric Dental Clinic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Reproducibility and accuracy of the ICDAS-II for occlusal caries detection

Objectives:The aim of this in vitro study was to assess the inter- and intra-examiner reproducibility and the accuracy of the International Caries Detection and Assessment System-II (ICDAS-II) in detecting occlusal caries.Methods:One hundred and sixty-three molars were independently assessed twice by two experienced dentists using the 0- to 6-graded ICDAS-II. The teeth were histologically prepared and classified using two different histological systems [Ekstrand et al. (1997) Caries Research vol. 31, pp. 224-231; Lussi et al. (1999) Caries Research vol. 33, pp. 261-266] and assessed for caries extension. Sensitivity, specificity, accuracy and area under the ROC curve (A(z)) were obtained at D(2) and D(3) thresholds. Unweighted kappa coefficient was used to assess inter- and intra-examiner reproducibility.Results:For the Ekstrand et al. histological classification the sensitivity was 0.99 and 1.00, specificity 1.00 and 0.69 and accuracy 0.99 and 0.76 at D(2) and D(3), respectively. For the Lussi et al. histological classification the sensitivity was 0.91 and 0.75, specificity 0.47 and 0.62 and accuracy 0.86 and 0.68 at D(2) and D(3), respectively. The A(z) varied from 0.54 to 0.73. The inter- and intra-examiner kappa values were 0.51 and 0.58, respectively.Conclusions:ICDAS-II presented good reproducibility and accuracy in detecting occlusal caries, especially caries lesions in the outer half of the enamel.

Relationship between DIAGNOdent values and sealant penetration depth on occlusal fissures

The aim of this in vitro study was to evaluate the relationship between laser fluorescence values and sealant penetration depth on occlusal fissures. One hundred and sixty-six permanent molars were selected and divided into four groups, which were each treated using a different sealant (two clear and two opaque). The teeth were independently measured twice by two experienced dentists using two laser fluorescence devices-DIAGNOdent (LF and LFpen)-before and after sealing, and then thermoclycled. After measuring, the teeth were histologically prepared and assessed for caries extension. Digital photographs of the cut sealed sites were assessed, and the sealant penetration depth was measured. All 166 sites were measured by one of the examiners taking as limits the outer and inner surface of the sealant into the fissure. For each device (LF and LFpen) and each group, the difference between the values at baseline and after sealing was plotted against the sealant penetration depth and scatter plots were provided. It could be observed that most of the points were concentrated around the zero line, for both LF and LFpen in the four groups. In conclusion, there is no relation between changes in DIAGNOdent values and increasing of depth sealant penetration within the occlusal fissures.

The Influence of Pit and Fissure Sealants on Infrared Fluorescence Measurements

The aim of this in vitro study was to evaluate the influence of pit and fissure sealants on fluorescence readings using lasers. We selected 166 permanent molars and randomly divided them into 4 groups which were each treated with a different sealant (a commercially available clear sealant, 2 opaque sealants and an experimental nanofilled clear sealant). The teeth were independently measured twice by 2 experienced dentists using conventional laser fluorescence (LF) and a laser fluorescence pen device (LFpen), before and after sealing, and again after thermocycling to simulate the thermal stressing between the tooth and the dental materials. Friedman test showed no statistically significant changes using LF and LFpen for the commercial clear sealant group, although values tended to increase after sealing. However, the values increased significantly after thermocycling. There was a statistically significant decrease in fluorescence after application of opaque sealants. After application of the experimental nanofilled clear sealant, LF values increased only after thermocycling, whereas the LFpen values increased after sealing and after thermocycling as well. The intraclass correlation coefficient ranged from 0.87 to 0.96 for interexaminer and 0.82 to 0.94 for intraexaminer reproducibility. It was shown that pit and fissure sealants influence LF and LFpen readings, with the values increasing or decreasing according to the material used. In conclusion, both laser fluorescence devices could be useful as an adjunct to detect occlusal caries under unfilled clear sealants. Nevertheless, surfaces sealed with clear nanofilled material could be assessed using only the LF device. Copyright (C) 2008 S. Karger AG, Basel.

Influence of examiner's clinical experience on the reproducibility and accuracy of radiographic examination in detecting occlusal caries

The aim of this in vitro study was to assess the influence of varying examiner's clinical experience on the reproducibility and accuracy of radiographic examination for occlusal caries detection. Standardized bitewing radiographs were obtained from 166 permanent molars. Radiographic examination was performed by final-year dental students from two universities (A, n=5; B, n=5) and by dentists with 5 to 7 years of experience who work in two different countries (C, n=5; D, n=5). All examinations were repeated after 1-week interval. The teeth were histologically prepared and assessed for caries extension. For intraexaminer reproducibility, the unweighted kappa values were: A (0.11-0.40), B (0.12-0.33), C (0.47-0.58), and D (0.42-0.71). Interexaminer reproducibility statistics were computed based on means +/- SD of unweighted kappa values: A (0.07 +/- 0.05), B (0.12 +/- 0.09), C (0.24 +/- 0.08), and D (0.33 +/- 0.10). Sensitivity, specificity, and accuracy were calculated at D(1) and D(3) thresholds and compared by performing McNemar test (p=0.05). D(1) sensitivity ranged between 0.29 and 0.75 and specificity between 0.24 and 0.85. D(3) specificity was moderate to high (between 0.62 and 0.95) for all groups, with statistically significant difference between the dentists groups (C and D). Sensitivity was low to moderate (between 0.21 and 0.57) with statistically significant difference for groups B and D. Accuracy was similar for all groups (0.55). Spearman's correlations were: A (0.12), B (0.24), C (0.30), and D (0.38). In conclusion, the reproducibility of radiographic examination was influenced by the examiner's clinical experience, training, and dental education as well as the accuracy in detecting occlusal caries.

Performance of fluorescence methods, radiographic examination and ICDAS II on occlusal surfaces in vitro

This study compared the performance of fluorescence-based methods, radiographic examination, and International Caries Detection and Assessment System (ICDAS) II on occlusal surfaces. One hundred and nineteen permanent human molars were assessed twice by 2 experienced dentists using the laser fluorescence (LF and LFpen) and fluorescence camera (FC) devices, ICDAS II and bitewing radiographs (BW). After measuring, the teeth were histologically prepared and assessed for caries extension. The sensitivities for dentine caries detection were 0.86 (FC), 0.78 (LFpen), 0.73 (ICDAS II), 0.51 (LF) and 0.34 (BW). The specificities were 0.97 (BW), 0.89 (LF), 0.65 (ICDAS II), 0.63 (FC) and 0.56 (LFpen). BW presented the highest values of likelihood ratio (LR)+ (12.47) and LR- (0.68). Rank correlations with histology were 0.53 (LF), 0.52 (LFpen), 0.41 (FC), 0.59 (ICDAS II) and 0.57 (BW). The area under the ROC curve varied from 0.72 to 0.83. Inter- and intraexaminer intraclass correlation values were respectively 0.90 and 0.85 (LF), 0.93 and 0.87 (LFpen) and 0.85 and 0.76 (FC). The ICDAS II kappa values were 0.51 (interexaminer) and 0.61 (intraexaminer). The BW kappa values were 0.50 (interexaminer) and 0.62 (intraexaminer). The Bland and Altman limits of agreement were 46.0 and 38.2 (LF), 55.6 and 40.0 (LFpen) and 1.12 and 0.80 (FC), for intra- and interexaminer reproducibilities. The posttest probability for dentine caries detection was high for BW and LF. In conclusion, LFpen, FC and ICDAS II presented better sensitivity and LF and BW better specificity. ICDAS II combined with BW showed the best performance and is the best combination for detecting caries on occlusal surfaces. Copyright (C) 2008 S. Karger AG, Basel.

Bruxismo na infância: um sinal de alerta para odontopediatras e pediatras

OBJETIVO: Apresentar uma revisão de literatura sobre o bruxismo na infância, abordando os fatores etiológicos, as características clínicas, os sinais e sintomas, a importância do diagnóstico por parte dos pediatras e odontopediatras e o tratamento multidisciplinar desta condição parafuncional. FONTES DE DADOS: Foram selecionados os artigos mais relevantes sobre o tema publicados desde 1907 até 2007, com pesquisa realizada no Medline, na Bibliografia Brasileira de Odontologia (BBO) e em livros de Odontologia. SÍNTESE DOS DADOS: O bruxismo é definido como um hábito não funcional do sistema mastigatório, caracterizado pelo ato de ranger ou apertar os dentes, podendo ocorrer durante o dia e durante o sono. A etiologia é multifatorial e a literatura sugere vários fatores associados: dentário, fisiológico, psicológico e neurológico. As forças exercidas pelo bruxismo podem provocar distúrbios em diferentes graus nos dentes e nos tecidos de suporte, na musculatura e na articulação têmporo-mandibular. O sinal mais comum é o desgaste nas faces incisais dos dentes anteriores e oclusais nos posteriores, além de mobilidade e hipersensibilidade dentárias, fratura de cúspides e restaurações e hipertonicidade dos músculos mastigatórios. CONCLUSÃO: O conhecimento dos fatores etiológicos e das características clínicas do bruxismo na infância é fundamental para que o diagnóstico seja precoce, permitindo que pediatras, odontopediatras e psicólogos possam estabelecer um tratamento multidisciplinar e favoreçam o desenvolvimento integral da criança para a promoção de saúde e bem-estar individual.

A survey of radiographic prescription in dental implant assessment

Objectives: To survey the current radiographic prescriptions in dental implant assessment amongst dentists in Brazil.Methods: Sixty-nine dentists were interviewed during a dental implant meeting by two calibrated graduate students, using a 19-question questionnaire, considering imaging modality options both for pre-operative implant site assessment and for follow-up, particularly with respect to cost, patient radiation dose, and broad coverage of facial bones and teeth. Epi-Info 6.04 software was used to analyse the database file.Results: Approximately 63.8% of the dentists prescribed only panoramic radiography for dental implant assessment and 28.9% ordered panoramic radiography plus periapical radiography and/or conventional tomography and/or computed tomography (CT). Only 7.2% of the dentists ordered conventional tomography or CT as a single examination, although 10.1% ordered it in combination with other imaging modalities. The main reasons given for prescribing panoramic radiography were broad coverage and cost (86.4%).Conclusions: This study has shown that most of the dentists in this study prescribe panoramic radiographs in dental implant assessment based on broad coverage and cost. They are not following the American Academy of Oral and Maxillofacial Radiology recommendations regarding cross-sectional imaging.

Oral bisphosphonate-related osteonecrosis of the jaws in rheumatoid arthritis patients: a critical discussion and two case reports

Background: Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a clinical condition characterized by the presence of exposed bone in the maxillofacial region. Its pathogenesis is still undetermined, but may be associated with risk factors such as rheumatoid arthritis (RA). The aim of this paper is to report two unpublished cases of BRONJ in patients with RA and to conduct a literature review of similar clinical cases with a view to describe the main issues concerning these patients, including demographic characteristics and therapeutic approaches applied.Methods: Two case reports of BRONJ involving RA patients were discussedResults: Both patients were aging female taking alendronate for more than 3 years. Lesions were detected in stage II in posterior mandible with no clear trigger agent. The treatment applied consisted of antibiotics, oral rinses with chlorhexidine, drug discontinuation and surgical procedures. Complete healing of the lesions was achieved.Conclusions: This paper brings to light the necessity for rheumatologists to be aware of the potential risk to their patients of developing BRONJ and to work together with dentists for the prevention and early detection of the lesions. Although some features seem to link RA with oral BRONJ and act as synergistic effects, more studies should be developed to support the scientific bases for this hypothesis.

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.