1000 resultados para Dental Arch. Face. Malocclusion.Orthodontics. Morphology
Resumo:
OBJECTIVES: The aim of this study was to evaluate in vivo the bonding of metallic orthodontic brackets with different adhesive systems. MATERIAL AND METHODS: Twenty patients (10.5-15.1 years old) who had sought corrective orthodontic treatment at a University Orthodontic Clinic were evaluated. Brackets were bonded from the right second premolar to the left second premolar in the upper and lower arches using: Orthodontic Concise, conventional Transbond XT, Transbond XT without primer, and Transbond XT associated with Transbond Plus Self-etching Primer (TPSEP). The 4 adhesive systems were used in all patients using a split-mouth design; each adhesive system was used in one quadrant of each dental arch, so that each group of 5 patients received the same bonding sequence. Initial archwires were inserted 1 week after bracket bonding. The number of bracket failures for each adhesive system was quantified over a 6-month period. RESULTS: The number of debonded brackets was: 8- Orthodontic Concise, 2- conventional Transbond XT, 9- Transbond XT without primer, and 1- Transbond XT + TPSEP. By using the Kaplan-Meier methods, statistically significant differences were found between the materials (p=0.0198), and the Logrank test identified these differences. Conventional Transbond XT and Transbond XT + TPSEP adhesive systems were statistically superior to Orthodontic Concise and Transbond XT without primer (p<0.05). There was no statistically significant difference between the dental arches (upper and lower), between the dental arch sides (right and left), and among the quadrants. CONCLUSIONS: The largest number of bracket failures occurred with Orthodontic Concise and Transbond XT without primer systems and few bracket failures occurred with conventional Transbond XT and Transbond XT+TPSEP. More bracket failures were observed in the posterior region compared with the anterior region.
Resumo:
AIM: The purpose of the present study was to analyze the relationship between root formation of the first premolars and skeletal maturation stages identified in hand-wrist radiographs. METHODS: A cross-sectional study was carried out involving the panoramic and hand-wrist radiographs obtained on the same date of 232 patients, 123 boys and 109 girls aged 4 years and 5 months to 17 years and 12 months. Root formation stages of the first premolars were related to the ossification stages of the sesamoid bone, epiphyseal stages of the phalanx of the thumb and epiphyseal stages of the radius. RESULTS: The studied variables demonstrated statistically significant correlations. CONCLUSION: Roots of the lower first premolars do not reach 2/3 of their complete length before adolescence.
Resumo:
OBJECTIVE: Assess the association between nonnutritive sucking habits and anterior open bite in the deciduous dentition of Japanese-Brazilian children. METHODS: 410 children of Japanese origin were assessed, 206 boys and 204 girls, between 2 and 6 years of age, in schools in São Paulo State, Brazil. Questionnaires concerning their nonnutritive sucking habits were sent to their legal guardians. Chi-square tests (p<0.05) were applied to assess the association between nonnutritive sucking habits and anterior open bite, and the logistic regression test to obtain the relative risk. RESULTS: The prevalence of sucking habits found in the sample was of 44.6% and for the anterior open bite, 4.4%. There was a statistically significant association between anterior open bite and sucking habits (O.R.=10.77), persistence of sucking habits from 2 to 4 years old (O.R.=22.06), and the persistence of sucking habits from 4 to 6 years old (O.R.=17.31). As for the interruption period of the habit, the group that had interrupted the habit for a period equal or inferior to six months showed an increased prevalence of open bite compared to the group without this habit or in which the habit was interrupted for more than six months. CONCLUSION: Japanese-Brazilian children that had sucking habits have greater chance of acquiring anterior open bite in the deciduous dentition.
Resumo:
INTRODUCTION: The opinion on the 'straight-wire' concept has been evolving since its origin, characterized by faithful followers or absolute skepticism. Currently, it seems reasonable to state that most professionals have a more realistic and critical viewpoint, with an attitude that reveals Orthodontics' maturity and greater knowledge on the technique. The most relevant criticisms refer to the impossibility of the both the Straight-Wire and the Standard systems to completely express the characteristics related to the brackets due to mechanical deficiencies, such as bracket/wire play. OBJECTIVES: A critical analysis of this relationship, which is unclear due to lack of studies, was the scope of this paper. METHODS: The compensatory treatment of two patients, using Capelozza's individualized brackets, works as the scenery for cephalometric evaluation of changes in incisor inclination produced by different dimensions of leveling archwires. RESULTS: The evaluation of these cases showed that, while the introduction of a 0.019 x 0.025-in stainless steel archwire in a 0.022 x 0.030-in slot did not produce significant changes in incisor inclination, the 0.021 x 0.025-in archwire was capable of changing it, mainly in mandibular incisors, and in the opposite direction to the compensation. CONCLUSION: Considering compensatory treatments, even when using an individualized prescription according to the malocclusion, the bracket/wire play seems to be a positive factor for malocclusion correction, without undesirable movements. Therefore, it seems reasonable to admit that, until a bracket system can have absolute individualization, the use of rectangular wires that still have a certain play with the bracket slot is advisable.
Resumo:
INTRODUCTION: In orthodontics, determining the facial type is a key element in the prescription of a correct diagnosis. In the early days of our specialty, observation and measurement of craniofacial structures were done directly on the face, in photographs or plaster casts. With the development of radiographic methods, cephalometric analysis replaced the direct facial analysis. Seeking to validate the analysis of facial soft tissues, this work compares two different methods used to determining the facial types, the anthropometric and the cephalometric methods. METHODS: The sample consisted of sixty-four Brazilian individuals, adults, Caucasian, of both genders, who agreed to participate in this research. All individuals had lateral cephalograms and facial frontal photographs. The facial types were determined by the Vert Index (cephalometric) and the Facial Index (photographs). RESULTS: The agreement analysis (Kappa), made for both types of analysis, found an agreement of 76.5%. CONCLUSIONS: We concluded that the Facial Index can be used as an adjunct to orthodontic diagnosis, or as an alternative method for pre-selection of a sample, avoiding that research subjects have to undergo unnecessary tests.
Resumo:
INTRODUCTION: This study evaluated changes in the smile characteristics of patients with maxillary constriction submitted to rapid maxillary expansion (RME). METHODS: The sample consisted of 81 extraoral photographs of maximum smile of 27 patients with mean age of 10 years, before expansion and 3 and 6 months after fixation of the expanding screw. The photographs were analyzed on the software Cef X 2001, with achievement of the following measurements: Transverse smile area, buccal corridors, exposure of maxillary incisors, gingival exposure of maxillary incisors, smile height, upper and lower lip thickness, smile symmetry and smile arch. Statistical analysis was performed by analysis of variance (ANOVA), at a significance level of 5%. RESULTS: RME promoted statistically significant increase in the transverse smile dimension and exposure of maxillary central and lateral incisors; maintenance of right and left side smile symmetry and of the lack of parallelism between the curvature of the maxillary incisal edges and lower lip border. CONCLUSIONS: RME was beneficial for the smile esthetics with the increase of the transverse smile dimension and exposure of maxillary central and lateral incisors.
Resumo:
OBJECTIVE: The aim of this prospective study was to cephalometrically analyze the stability of dentoalveolar and skeletal changes produced by a removable appliance with palatal crib associated to high-pull chincup in individuals with anterior open bite treated for 12 months, and compare them to individuals with similar malocclusion and age, not submitted to orthodontic treatment, also followed for the same period. METHODS: Nineteen children with a mean age of 9.78 years old treated for 12 months with a removable appliance with palatal crib associated with chincup therapy were evaluated after 15 months (post-treatment period) and compared with a control group of 19 subjects with mean age of 9.10 years with the same malocclusion that was followed-up for the same period. Seventy-six lateral cephalograms were evaluated at T1 (after correction) and T2 (follow-up) and cephalometric variables were analyzed by statistical tests. RESULTS: The results did not show significant skeletal, soft tissue or maxillary dentoalveolar changes. Overall, treatment effects on the experimental group were maintained at T2 evaluation with an increase of 0.56 mm in overbite. Overjet and maxillary incisors/molars position (vertical and sagittal) remained essentially unchanged during the study period. Only mandibular incisors showed significant changes (labial inclination and protrusion) compared to control group. CONCLUSIONS: Thus, it can be concluded that the early open bite treatment with a removable appliance and palatal crib associated with high-pull chincup therapy provided stability of 95%.
Resumo:
OBJECTIVE: The objective of this retrospective study was to compare, by means of lateral cephalograms, the facial growth pattern changes due to the treatment with and without extractions of four first premolars in dolichofacial individuals. METHODS: Groups 1 and 2 were constituted of 23 dolichofacial patients each, with Class II malocclusion, division 1 and initial age average of 12.36 and 12.29 years, respectively. Patients from Group 1 were treated without extractions and Group 2 was treated with extraction of the four first premolars, given that both used occipital headgear. Groups were compatibilized according to age, treatment period, gender and malocclusion severity. The t test was applied for intergroups comparison. RESULTS: Most variables (SN.PP, SN.Ocl and FMA) did not present statistically significant difference between groups. CONCLUSION: Although the treatment with extractions tend to reduce the mandibular plane angle (SN.GoGn) and the facial axis (NS.Gn), the analyzed treatment protocols did not affect in a clinically relevant way the facial growth pattern.
Resumo:
A assimetria das arcadas dentárias constitui um assunto de grande importância estudado por profissionais de Ortodontia na elaboração de um diagnóstico correto, planejamento e execução de um tratamento ortodôntico bem sucedido. O objetivo deste estudo foi avaliar o grau de assimetria das arcadas dentárias em indivíduos com oclusão normal e má oclusão de Classe II, divisão 1 e 2, bem como o dimorfismo sexual existente. Foram avaliados 180 pares de modelos de estudo de indivíduos do sexo masculino e feminino, na faixa etária de 12 a 21 anos, divididos em 3 grupos de 60 pares de modelos, de acordo com a má oclusão. Os grupos foram classificados em: Grupo 1 - indivíduos com oclusão normal, Grupo 2 - indivíduos com má oclusão de Classe II divisão 1 (Cl II 1), e Grupo 3 - indivíduos com má oclusão de Classe II divisão 2 (Cl II 2). Os modelos foram medidos utilizando-se um aparelho inédito, idealizado e fabricado exclusivamente para a análise de assimetria das arcadas dentárias. Para a análise de assimetria foram realizadas 2 medições angulares desvio de linha média (DLM), posicionamento dos caninos (PC) e 3 lineares distância dos caninos à rafe palatina (DC), distância inter-caninos (DIC), posicionamento dos primeiros molares no sentido ântero-posterior (PM). Concluiu-se que a ocorrência de assimetria nas arcadas dentárias independe da má oclusão. O Grupo 1 apresentou um menor grau de assimetria nas arcadas dentárias em relação aos grupos 2 e 3, os quais apresentaram um grau de assimetria semelhante. O grau de assimetria nas arcadas dentárias inferiores, nos 3 grupos, foi maior do que nas arcadas dentárias superiores. A direção do desvio da linha média apresentou uma correlação inversamente proporcional do lado em que o molar se apresentava mesializado, nas arcadas superior e inferior dos três grupos, com exceção da arcada superior no Grupo 2 (Classe II divisão 1). Houve dimorfismo sexual estatisticamente significante para algumas medidas, porém é importante considerar os baixos valores e a disposição, destas diferenças, entre as medidas realizadas, a qual revela ter se tratado de dados obtidos ao acaso.
Resumo:
A assimetria das arcadas dentárias constitui um assunto de grande importância estudado por profissionais de Ortodontia na elaboração de um diagnóstico correto, planejamento e execução de um tratamento ortodôntico bem sucedido. O objetivo deste estudo foi avaliar o grau de assimetria das arcadas dentárias em indivíduos com oclusão normal e má oclusão de Classe II, divisão 1 e 2, bem como o dimorfismo sexual existente. Foram avaliados 180 pares de modelos de estudo de indivíduos do sexo masculino e feminino, na faixa etária de 12 a 21 anos, divididos em 3 grupos de 60 pares de modelos, de acordo com a má oclusão. Os grupos foram classificados em: Grupo 1 - indivíduos com oclusão normal, Grupo 2 - indivíduos com má oclusão de Classe II divisão 1 (Cl II 1), e Grupo 3 - indivíduos com má oclusão de Classe II divisão 2 (Cl II 2). Os modelos foram medidos utilizando-se um aparelho inédito, idealizado e fabricado exclusivamente para a análise de assimetria das arcadas dentárias. Para a análise de assimetria foram realizadas 2 medições angulares desvio de linha média (DLM), posicionamento dos caninos (PC) e 3 lineares distância dos caninos à rafe palatina (DC), distância inter-caninos (DIC), posicionamento dos primeiros molares no sentido ântero-posterior (PM). Concluiu-se que a ocorrência de assimetria nas arcadas dentárias independe da má oclusão. O Grupo 1 apresentou um menor grau de assimetria nas arcadas dentárias em relação aos grupos 2 e 3, os quais apresentaram um grau de assimetria semelhante. O grau de assimetria nas arcadas dentárias inferiores, nos 3 grupos, foi maior do que nas arcadas dentárias superiores. A direção do desvio da linha média apresentou uma correlação inversamente proporcional do lado em que o molar se apresentava mesializado, nas arcadas superior e inferior dos três grupos, com exceção da arcada superior no Grupo 2 (Classe II divisão 1). Houve dimorfismo sexual estatisticamente significante para algumas medidas, porém é importante considerar os baixos valores e a disposição, destas diferenças, entre as medidas realizadas, a qual revela ter se tratado de dados obtidos ao acaso.
Resumo:
O objetivo desta pesquisa consistiu em comparar as alterações dentárias, esqueléticas e tegumentares promovidas pelo aparelho de Fränkel-2 com um grupo controle, além de observar a estabilidade desses efeitos promovidos pelo tratamento, num período médio de 7,11 anos pós-tratamento. A amostra compreendeu um total de 90 telerradiografias em norma lateral, sendo 54 telerradiografias provenientes de 18 pacientes tratados com o RF-2 avaliados em três fases (T1:início de tratamento;T2: final de tratamento e T3: pós-tratamento) e 36 telerradiografias de 18 pacientes-controle, observados em dois tempos. Para comparação entre os grupos tratado e controle foi utilizado o teste t de Student não pareado. Já para a análise dos valores do grupo tratado nos três tempos (T1, T2 e T3) foi utilizada a Análise de Variância (ANOVA) a um critério e o teste de Tukey (p<0,05). As principais alterações proporcionadas pelo aparelho RF-2 observadas a partir da comparação do grupo tratado com o controle envolveram efeitos mandibulares, principalmente a protrusão e aumento do comprimento mandibular associado com uma rotação horária, que resultou em uma maior altura facial total (N-Me) e ântero-inferior (AFAI), além de suave rotação anti-horária do plano palatino (SN.PP). Os incisivos superiores retruíram e o inferior vestibularizou. Houve uma distalização relativa dos molares superiores juntamente com a diminuição do overjet , desta forma a convexidade do perfil facial tegumentar melhorou. No período pós-tratamento (T3) observou-se uma estabilidade sagital de maxila (SNA) e mandíbula (SNB), das variáveis do padrão facial, da inclinação do incisivo superior, do ângulo nasolabial e do overjet . A mandíbula e a maxila continuaram a crescer no sentido antero-posterior, juntamente com as alturas faciais Houve também a extrusão de incisivos e molares. Já o plano oclusal e o ângulo goníaco diminuíram na fase pós-tratamento.(AU)
Resumo:
O objetivo desta pesquisa consistiu em comparar as alterações dentárias, esqueléticas e tegumentares promovidas pelo aparelho de Fränkel-2 com um grupo controle, além de observar a estabilidade desses efeitos promovidos pelo tratamento, num período médio de 7,11 anos pós-tratamento. A amostra compreendeu um total de 90 telerradiografias em norma lateral, sendo 54 telerradiografias provenientes de 18 pacientes tratados com o RF-2 avaliados em três fases (T1:início de tratamento;T2: final de tratamento e T3: pós-tratamento) e 36 telerradiografias de 18 pacientes-controle, observados em dois tempos. Para comparação entre os grupos tratado e controle foi utilizado o teste t de Student não pareado. Já para a análise dos valores do grupo tratado nos três tempos (T1, T2 e T3) foi utilizada a Análise de Variância (ANOVA) a um critério e o teste de Tukey (p<0,05). As principais alterações proporcionadas pelo aparelho RF-2 observadas a partir da comparação do grupo tratado com o controle envolveram efeitos mandibulares, principalmente a protrusão e aumento do comprimento mandibular associado com uma rotação horária, que resultou em uma maior altura facial total (N-Me) e ântero-inferior (AFAI), além de suave rotação anti-horária do plano palatino (SN.PP). Os incisivos superiores retruíram e o inferior vestibularizou. Houve uma distalização relativa dos molares superiores juntamente com a diminuição do overjet , desta forma a convexidade do perfil facial tegumentar melhorou. No período pós-tratamento (T3) observou-se uma estabilidade sagital de maxila (SNA) e mandíbula (SNB), das variáveis do padrão facial, da inclinação do incisivo superior, do ângulo nasolabial e do overjet . A mandíbula e a maxila continuaram a crescer no sentido antero-posterior, juntamente com as alturas faciais Houve também a extrusão de incisivos e molares. Já o plano oclusal e o ângulo goníaco diminuíram na fase pós-tratamento.(AU)
Resumo:
O presente estudo investigou os efeitos das alterações transversais do arco dentário inferior na largura da borda WALA, ocorridos em pacientes com má oclusão classe II, divisão 1, no pré e pós-tratamento ortodôntico. Foram selecionados 36 pacientes, na faixa etária entre 12 e 15 anos e sete meses, que realizaram o tratamento ortodôntico com o emprego do aparelho pré-ajustado Straight Wire. Para avaliar o comportamento das dimensoes transversais foram mensuradas a largura do arco dentário inferior, a largura da borda wala e a distancia horizontal do ponto do eixo vestibular a borda wala por meio de um paquimetro dogital diretamente nos modelos de gesso inferiores pré e pós tratamento.
Resumo:
Este estudo objetiva encontrar a forma e dimensão de arcos dentais para definir a forma de um arco contínuo que possa ser utilizado na técnica lingual. A amostra foi composta de 70 indivíduos brasileiros, leucodermas, com oclusão normal natural, que apresentaram no mínimo quatro das seis chaves de oclusão de Andrews. Esta amostra possui 40% de indivíduos do sexo masculino (28 homens) e 60% do sexo feminino (42 mulheres) com idade média de 16,4a. Os modelos dos arcos dentais da maxila e mandíbula foram digitalizados (3D) e as imagens exportadas para o software Delcam Power SHAPE® 2010 (Birmingham, U.K.). Foram selecionados pontos nas superfícies linguais dos dentes e traçadas 14 medidas para determinar a forma e a dimensão do arco dental. O teste de Shapiro-Wilk possibilitou definir uma forma de arco pequeno utilizando o percentil 25% (P25%), um arco médio (média) e uma forma de arco grande pelo percentil 75% (P75%). O teste t-student comparou se houve uma diferença entre os sexos, e foram encontrados 12 tamanhos de arcos dentais (6 para o sexo feminino e 6 para o sexo masculino). Em todos os testes estatísticos foi adotado nível de significância de 5% (p<0,05). A partir dos resultados obtidos, foi possível definir uma forma de arco contínuo para ser utilizado na técnica Lingual Straight Wire (LSW) - parábola levemente achatada na região anterior - e, devido à similaridade entre alguns tamanhos de arcos dentais, encontrados pelo dimorfismo sexual, pôde ser elaborado um diagrama de arcos de maneira mais simplificada.
Resumo:
O objetivo deste trabalho foi avaliar a profundidade do palato e as dimensões da arcada dentária superior de indivíduos com má oclusão e diferentes tipos faciais. A amostra empregada neste estudo foi constituída por telerradiografias em norma lateral e modelos de estudo de 135 pacientes com más oclusões de Classe I (n = 45), Classe II (n = 45) e Classe III (n = 45) de ANGLE6 (1899), sendo 67 do sexo feminino e 68 do sexo masculino, com faixa etária entre 12 e 21 anos de idade, divididos igualmente em três grupos conforme o tipo facial apresentado: Braquifacial, Mesofacial e Dolicofacial. As medidas da distância intercaninos superiores, distância intermolares superiores e comprimento da arcada superior foram obtidas por meio de um paquímetro digital. A medida da profundidade do palato foi efetuada com o auxílio de um aparelho especialmente desenvolvido e adaptado a um paquímetro digital (ARMANDO et al.8, 2002), com a finalidade de obter-se a padronização desta medida. Os resultados obtidos demonstraram que, quanto ao tipo facial, houve diferença estatisticamente significante apenas para a medida da profundidade do palato, sendo que, os indivíduos braquifaciais apresentaram palato com menor profundidade (média = 18,18 mm), quando comparados aos indivíduos dolicofaciais (média = 19,52 mm). Quanto ao dimorfismo sexual, pudemos verificar que, os indivíduos do sexo masculino apresentaram médias da distância intermolares superiores (51,36 mm) e da profundidade do palato (19,61 mm) aumentadas, de forma significante, em relação às médias obtidas para o sexo feminino (50,15 mm e 18,37 mm para as medidas da distância intermolares e da profundidade do palato, respectivamente). Avaliando o tipo de má oclusão, pudemos constatar que houve diferença estatisticamente significante apenas para a medida do comprimento da arcada, sendo que, indivíduos com má oclusão de Classe II apresentaram arcadas dentárias superiores com maior comprimento ântero-posterior (média = 31,23 mm) que indivíduos com má oclusão de Classe III (média = 29,64 mm). Entretanto, a média da medida comprimento da arcada encontrada para o grupo Classe I (30,52 mm) não apresentou diferença estatisticamente significante quando comparada às médias obtidas para os grupos Classe II e Classe III.