Molten globule-like state of peanut lectin monomer retains its carbohydrate specificity - Implications in protein folding and legume lectin oligomerization

A central question in biological chemistry is the minimal structural requirement of a protein that would determine its specificity and activity, the underlying basis being the importance of the entire structural element of a protein with regards to its activity vis a vis the overall integrity and stability of the protein. Although there are many reports on the characterization of protein folding/ unfolding intermediates, with considerable secondary structural elements but substantial loss of tertiary structure, none of them have been reported to show any activity toward their respective ligands. This may be a result of the conditions under which such intermediates have been isolated or due to the importance of specific structural elements for the activity. In this paper we report such an intermediate in the unfolding of peanut agglutinin that seems to retain, to a considerable degree, its carbohydrate binding specificity and activity. This result has significant implications on the molten globule state during the folding pathway(s) of proteins in general and the quaternary association in legume lectins in particular, where precise subunit topology is required for their biologic activities.

Holographic optical elements: State-of-the-art review: Part 2

This is the second part of a two part review on the state-of-the-art in holographic optical elements (HOEs). The aspects of fabrication, evaluation, and applications of HOEs, are discussed in this part. It details the direction of future efforts towards finding work-horse type recording media, developing new methods for the evaluation of HOE, and identifying the areas of application where HOEs are to be considered as indispensable components/tools. Finally a summary of all the suggestions for future work made in the two parts is displayed in Table 2 of this part of the review.

Holographic optical elements — State-of-the-art review:Part I

A state-of-the-art review on holographic optical elements (HOE) is presented in two parts. In Part I a conceptual overview and an assessment of the current status on the design of HOE have been included. It is pointed out that HOE development based on the use of squeezed light, speckle, non-linear recording, comparative studies between optics and communication approaches, are some of the promising directions for future research in this vital area of photonics.

State of Charge of Lead Acid Battery

Lead acid batteries are used in hybrid vehicles and telecommunications power supply. For reliable operation of these systems, an indication of state of charge of battery is essential. To determine the state of charge of battery, current integration method combined with open circuit voltage, is being implemented. To reduce the error in the current integration method the dependence of available capacity as a function of discharge current is determined. The current integration method is modified to incorporate this factor. The experimental setup built to obtain the discharge characterstics of the battery is presented.

“Empire is a state of mind” – Imagining Eurasia in Russia –

Työssäni tarkastelen venäläistä neo-euraasianistista liikettä ja tapoja joilla liikkeen aktivistit rakentavat Euraasiasta yhtenäistä kokonaisuutta ja imperiumia. Keskeisiä tutkimuskysymyksiäni ovat: Mikä imperiumi on ja mitkä ovat sen keskeisiä motivaatioita ja teemoja? Kuinka imperiumin idea rakentuu tai käsitetään ja tämän voi tulkita? Minkälaisia seurauksia voi tulkita heidän tavallaan Euraasia nähdä olevan? Materiaalina käytän haastatteluja, jotka on kerätty Moskovassa keväällä 2008, ja liikkeen kirjallisia tuotoksia (lehdet ja Internet -sivut). Neo-euraasianistisella liikkeellä tarkoitan tässä työssä Kansainvälistä Euraasianistista liikettä (Meždunarodnoe Evrazijskoe Dviženie) ja sen alahaaraa Euraasianistista Nuorisoliittoa (Evrazijskij Sojuz Molodëži). Liike perustettiin virallisesti 2003, mutta rakentaa vahvasti historiallista yhteyttä 1930 -luvun klassiseen eurasianismiin. Tämän lisäksi sen diskurssissa on paljon neuvostoliittolaisia, fasistisia, uuskonservatiivisia ja nationalistisia piirteitä. Liikkeen johtohahmo on filosofi-geopoliitikko Alexandr Dugin. Työn tausta-ajatuksena minua kiinnostaa etenkin nk. älymystön tai intelligenttien vaikutus nationalismiin tai sosiaalisia ryhmiä määrittelevien diskurssien kehitykseen ja muutokseen.Tarkastelen materiaalia diskurssianalyyttisesta näkökulmasta. Näen diskurssianalyysin sen tutkimisena, miten sosiaalista todellisuutta tuotetaan erilaisissa sosiaalisissa käytännöissä. Samalla näiden diskurssien tutkiminen, foucautlaisen perinteen myötä, tarkastelee kriittisesti niiden tuottamia (aktualisoituneita sekä potentiaalisia) valtasuhteita. Käytän työssäni myös Benedict Andersonin kuvitellun yhteisön (imagined communities) käsitettä, joka auttaa hahmottamaan tapaa, jolla tutkimuskohteeni rakentavat imperiumia yhteisönä. Aktivistien puheessa imperiumi (imperiâ) tulee esiin pääasiallisesti positiivisesti ja ”heidän omanaan,” kun taas termi imperialismi (imperializm) pääosin negatiivisena, liittyen etenkin keskeisenä vihollisena pidettyihin Yhdysvaltoihin. Esiin nousee monta toisiinsa liittyvää teemaa, jotka jaottelen viideksi pääteemaksi. Näistä tarkastelen lähemmin imperiumia ”kaikkien kansojen hyväntekijänä (poliittinen puoli)”, ulkoisen voiman lähteenä (historiallis-geopoliittinen puoli) sekä kollektiivisen subjektin luojana (imperialistis-nationalistinen puoli). Pyrin kontekstualisoimaan diskurssin ja tarkastelemaan tapoja, joilla se ammentaa motiiveja myös historiallis-kulttuurisista tavoista hahmottaa aluetta ja sen asukkaita. Käsittelen myös kansan, kansakunnan, etnoksen ja nationalismin käsitteitä ja sitä, miten ne nousevat neo-eurasianistisessa diskursissa esiin. Imperiaalisen nationalismin (imperskij nacionalizm) käsite auttaa ymmärtämään niitä tapoja, jolla liike tekee sekä pesäeroa nationalismiin että samalla hyödyntää monia nationalistisen diskurssin perusteemoja. Eräs liikkeen diskurssin keskeisistä eroista niin sanottuun nationalismin valtavirtaan on ”kansakunnan (naciâ)” käsitteen vahva negatiivinen konnotaatio. Sen vastakohtana esiin nostetaan vahvasti kansan (narod) käsite. Samalla kuitenkin etnisen venäläisen (russkij) käsitettä käytetään tavallista laajemmin ja kattavammin kuin tavallisesti, ja ennen kaikkea Venäjä nousee imperiumin keskeisimmäksi tekijäksi. Euraasialaiseen imperiumiin liitetyistä positiivistista mielikuvista käsittelen tarkemmin monikansallisuuden ja kansojen kodin ideaa, joka nousee mielestäni huomattavaksi retoriseksi taustaksi kaikessa materiaalissa. Tähän liittyy vahvasti myös saman teeman sivujuonne, eli imperiumin ”vapauttava” rooli. Tulkitsen, että liikkeen imperiumi -diskurssilla on instrumentaalinen luonne: se legitimoi aktivistien vaatimuksia varsinkin entisen Neuvostoliiton alueen suhteen. ”Euraasialaisen kansan” ajatus toimii mahdollisena Euraasiaa yhteisenä tekijänä ”Neuvostokansan” tilalla. Sen taustalla materiaalistani päätellen siintävät kuitenkin enemmänkin Venäjä ja venäläis -spesifit vaateet kuin koko Euraasia. Pohdin myös kansakunnan (nation) hyljeksimisen syitä ja käsitteen sopivuutta Venäjälle, kuten myös venäläisyyden käsitteiden kerrostuneisuutta. Kokonaisuudessaan imperiumi tuli esiin abstraktina, utopistisena ja ”totaalisena” kokonaisuutena.

First-principles analysis of electron correlation, spin ordering and phonons in the normal state of FeSe1-x

We present first-principles density-functional-theory-based calculations to determine the effects of the strength of on-site electron correlation, magnetic ordering, pressure and Se vacancies on phonon frequencies and electronic structure of FeSe1-x. The theoretical equilibrium structure (lattice parameters) of FeSe depends sensitively on the value of the Hubbard parameter U of on-site correlation and magnetic ordering. Our results suggest that there is a competition between different antiferromagnetic states due to comparable magnetic exchange couplings between first- and second-neighbor Fe sites. As a result, a short range order of stripe antiferromagnetic type is shown to be relevant to the normal state of FeSe at low temperature. We show that there is a strong spin-phonon coupling in FeSe (comparable to its superconducting transition temperature) as reflected in large changes in the frequencies of certain phonons with different magnetic ordering, which is used to explain the observed hardening of a Raman-active phonon at temperatures (similar to 100 K) where magnetic ordering sets in. The symmetry of the stripe antiferromagnetic phase permits an induced stress with orthorhombic symmetry, leading to orthorhombic strain as a secondary order parameter at the temperature of magnetic ordering. The presence of Se vacancies in FeSe gives rise to a large peak in the density of states near the Fermi energy, which could enhance the superconducting transition temperature within the BCS-like picture.

On the charging state of atmospheric aerosols and ion-induced nucleation

Floating in the air that surrounds us is a number of small particles, invisible to the human eye. The mixture of air and particles, liquid or solid, is called an aerosol. Aerosols have significant effects on air quality, visibility and health, and on the Earth's climate. Their effect on the Earth's climate is the least understood of climatically relevant effects. They can scatter the incoming radiation from the Sun, or they can act as seeds onto which cloud droplets are formed. Aerosol particles are created directly, by human activity or natural reasons such as breaking ocean waves or sandstorms. They can also be created indirectly as vapors or very small particles are emitted into the atmosphere and they combine to form small particles that later grow to reach climatically or health relevant sizes. The mechanisms through which those particles are formed is still under scientific discussion, even though this knowledge is crucial to make air quality or climate predictions, or to understand how aerosols will influence and will be influenced by the climate's feedback loops. One of the proposed mechanisms responsible for new particle formation is ion-induced nucleation. This mechanism is based on the idea that newly formed particles were ultimately formed around an electric charge. The amount of available charges in the atmosphere varies depending on radon concentrations in the soil and in the air, as well as incoming ionizing radiation from outer space. In this thesis, ion-induced nucleation is investigated through long-term measurements in two different environments: in the background site of Hyytiälä and in the urban site that is Helsinki. The main conclusion of this thesis is that ion-induced nucleation generally plays a minor role in new particle formation. The fraction of particles formed varies from day to day and from place to place. The relative importance of ion-induced nucleation, i.e. the fraction of particles formed through ion-induced nucleation, is bigger in cleaner areas where the absolute number of particles formed is smaller. Moreover, ion-induced nucleation contributes to a bigger fraction of particles on warmer days, when the sulfuric acid and water vapor saturation ratios are lower. This analysis will help to understand the feedbacks associated with climate change.

Precise measurement of hyperfine structure in the 2P(1/2) state of Li-7 using saturated-absorption spectroscopy

We report a precise measurement of the hyperfine interval in the 2P(1/2) state of Li-7. The transition from the ground state (D-1 line) is accessed using a diode laser and the technique of saturated-absorption spectroscopy in hot Li vapor. The interval is measured by locking an acousto-optic modulator to the frequency difference between the two hyperfine peaks. The measured interval of 92.040(6) MHz is consistent with an earlier measurement reported by us using an atomic-beam spectrometer Das and Natarajan, J. Phys. B 41, 035001 (2008)]. The interval yields the magnetic dipole constant in the P-1/2 state as A = 46.047(3), which is discrepant from theoretical calculations by > 80 kHz.

Rate Control State-of-the-art Survey

The majority of Internet traffic use Transmission Control Protocol (TCP) as the transport level protocol. It provides a reliable ordered byte stream for the applications. However, applications such as live video streaming place an emphasis on timeliness over reliability. Also a smooth sending rate can be desirable over sharp changes in the sending rate. For these applications TCP is not necessarily suitable. Rate control attempts to address the demands of these applications. An important design feature in all rate control mechanisms is TCP friendliness. We should not negatively impact TCP performance since it is still the dominant protocol. Rate Control mechanisms are classified into two different mechanisms: window-based mechanisms and rate-based mechanisms. Window-based mechanisms increase their sending rate after a successful transfer of a window of packets similar to TCP. They typically decrease their sending rate sharply after a packet loss. Rate-based solutions control their sending rate in some other way. A large subset of rate-based solutions are called equation-based solutions. Equation-based solutions have a control equation which provides an allowed sending rate. Typically these rate-based solutions react slower to both packet losses and increases in available bandwidth making their sending rate smoother than that of window-based solutions. This report contains a survey of rate control mechanisms and a discussion of their relative strengths and weaknesses. A section is dedicated to a discussion on the enhancements in wireless environments. Another topic in the report is bandwidth estimation. Bandwidth estimation is divided into capacity estimation and available bandwidth estimation. We describe techniques that enable the calculation of a fair sending rate that can be used to create novel rate control mechanisms.

Impedance parameters and the state-of-charge. III. Zinc-manganese dioxide and magnesium-manganese dioxide dry batteries

The problem of non-destructive determination of the state-of-charge of zinc- and magnesium-manganese dioxide dry batteries is examined experimentally from the viewpoint of internal impedance and open-circuit voltage at equilibrium. It is shown that the impedance is mainly charge-transfer controlled at relatively high states-of-charge and progressively changes over to diffusion control as the state-of-charge decreases in the case of zinc-manganese dioxide dry batteries. On the other hand, the impedance is mainly diffusion controlled for undischarged batteries but becomes charge-transfer controlled as soon as there is some discharge in the case of magnesium-manganese dioxide batteries. It is concluded that the determination of state-of-charge is not possible for both types of batteries by the measurement of impedance parameters due to film-induced fluctuations of these parameters. The measurement of open-circuit voltage at equilibrium can be used as a state-of-charge indicator for Zn-MnO2 batteries but not for Mg-MnO2 batteries.

Impedance parameters and the state-of-charge. II. Lead-acid battery

The determination of the state-of-charge of the lead-acid battery has been examined from the viewpoint of internal impedance. It is shown that the impedance is controlled by charge transfer and to a smaller extent by diffusion processes in the frequency range 15–100 Hz. The equivalent series/parallel capacitance as well as the a.c. phase-shift show a parabolic dependence upon the state-of-charge, with a maximum or minimum at 50% charge. These results are explained on the basis of a uniform transmission-line analog equivalent circuit for the battery electrodes.

Impedance parameters and the state-of charge. I. Nickel-cadmium battery

The problem of nondestructive determination of the state-of-charge of nickel-cadmium batteries has been examined experimentally as well as theoretically from the viewpoint of internal impedance. It is shown that the modulus of the impedance is mainly controlled by diffusion at all states of charge. Even so, a prediction of the state of charge is possible if the equivalent series/parallel capacitance or the alternating current phase shift is measured at a sufficiently low a.c. test frequency (5–30 Hz) which also avoids inductive effects. These results are explained on the basis of a uniform transmission-line analog equivalent circuit for the battery electrodes.

Time-Resolved Resonance Raman Studies on Proton-Induced Electron-Transfer Reaction from Triplet Excited State of 2-Methoxynaphthalene to Decafluorobenzophenone

In this paper time-resolved resonance Raman (TR3) spectra of intermediates generated by proton induced electron-transfer reaction between triplet 2-methoxynaphthalene ((ROMe)-R-3) and decafluorobenzophenone (DFBP) are presented The TR3 vibrational spectra and structure of 2-methoxynaphthalene cation radical (ROMe+) have been analyzed by density functional theory (DFT) calculation It is observed that the structure of naphthalene ring of ROMe+ deviates from the structure of cation radical of naphthalene

Influence of state of stress on the processing map for hot working of stainless steel type AISI 304L: compression vs. torsion

Processing maps for hot working of stainless steel of type AISI 304L have been developed on the basis of the flow stress data generated by compression and torsion in the temperature range 600–1200 °C and strain rate range 0.1–100 s−1. The efficiency of power dissipation given by 2m/(m+1) where m is the strain rate sensitivity is plotted as a function of temperature and strain rate to obtain a processing map, which is interpreted on the basis of the Dynamic Materials Model. The maps obtained by compression as well as torsion exhibited a domain of dynamic recrystallization with its peak efficiency occurring at 1200 °C and 0.1 s−1. These are the optimum hot-working parameters which may be obtained by either of the test techniques. The peak efficiency for the dynamic recrystallization is apparently higher (64%) than that obtained in constant-true-strain-rate compression (41%) and the difference in explained on the basis of strain rate variations occurring across the section of solid torsion bar. A region of flow instability has occurred at lower temperatures (below 1000 °C) and higher strain rates (above 1 s−1) and is wider in torsion than in compression. To achieve complete microstructure control in a component, the state of stress will have to be considered.