Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

On Real-Time Monitoring And Control For Efficient Management Of Drinking Water Networks: Barcelona Case Study

Drinking water utilities in urban areas are focused on finding smart solutions facing new challenges in their real-time operation because of limited water resources, intensive energy requirements, a growing population, a costly and ageing infrastructure, increasingly stringent regulations, and increased attention towards the environmental impact of water use. Such challenges force water managers to monitor and control not only water supply and distribution, but also consumer demand. This paper presents and discusses novel methodologies and procedures towards an integrated water resource management system based on advanced ICT technologies of automation and telecommunications for largely improving the efficiency of drinking water networks (DWN) in terms of water use, energy consumption, water loss minimization, and water quality guarantees. In particular, the paper addresses the first results of the European project EFFINET (FP7-ICT2011-8-318556) devoted to the monitoring and control of the DWN in Barcelona (Spain). Results are split in two levels according to different management objectives: (i) the monitoring level is concerned with all the aspects involved in the observation of the current state of a system and the detection/diagnosis of abnormal situations. It is achieved through sensors and communications technology, together with mathematical models; (ii) the control level is concerned with computing the best suitable and admissible control strategies for network actuators as to optimize a given set of operational goals related to the performance of the overall system. This level covers the network control (optimal management of water and energy) and the demand management (smart metering, efficient supply). The consideration of the Barcelona DWN as the case study will allow to prove the general applicability of the proposed integrated ICT solutions and their effectiveness in the management of DWN, with considerable savings of electricity costs and reduced water loss while ensuring the high European standards of water quality to citizens.

Comparison Of Demand Pattern Calibration In Water Distribution Networks With Geographic And Non-Geographic Parameterization

Demands are one of the most uncertain parameters in a water distribution network model. A good calibration of the model demands leads to better solutions when using the model for any purpose. A demand pattern calibration methodology that uses a priori information has been developed for calibrating the behaviour of demand groups. Generally, the behaviours of demands in cities are mixed all over the network, contrary to smaller villages where demands are clearly sectorised in residential neighbourhoods, commercial zones and industrial sectors. Demand pattern calibration has a final use for leakage detection and isolation. Detecting a leakage in a pattern that covers nodes spread all over the network makes the isolation unfeasible. Besides, demands in the same zone may be more similar due to the common pressure of the area rather than for the type of contract. For this reason, the demand pattern calibration methodology is applied to a real network with synthetic non-geographic demands for calibrating geographic demand patterns. The results are compared with a previous work where the calibrated patterns were also non-geographic.

Application Of Real-Time Control Strategy To Improve Nitrogen Removal In Wastewater Treatment

Biological nitrogen removal is an important task in the wastewater treatment. However, the actual removal of total nitrogen (TN) in the wastewater treatment plant (WWTP) is often unsatisfactory due to several causes, one of which is the insufficient availability of carbon source. One possible approach to improve the nitrogen removal therefore is addition of external carbon source, while the amount of which is directly related to operation cost of a WWTP. It is obviously necessary to determine the accurate amount of addition of external carbon source according to the demand depending on the influent wastewater quality. This study focused on the real-time control of external carbon source addition based on the on-line monitoring of influent wastewater quality. The relationship between the influent wastewater quality (specifically the concentration of COD and ammonia) and the demand of carbon source was investigated through experiments on a pilot-scale A/O reactor (1m3) at the Nanjing WWTP, China. The minimum doses of carbon source addition at different situations of influent wastewater quality were determined to ensure the effluent wastewater quality meets the discharge standard. The obtained relationship is expected to be applied in the full-scale WWTPs. .

Optimized Water Demand Management Through Intelligent Sensing And Analytics: The WISDOM Approach

New business and technology platforms are required to sustainably manage urban water resources [1,2]. However, any proposed solutions must be cognisant of security, privacy and other factors that may inhibit adoption and hence impact. The FP7 WISDOM project (funded by the European Commission - GA 619795) aims to achieve a step change in water and energy savings via the integration of innovative Information and Communication Technologies (ICT) frameworks to optimize water distribution networks and to enable change in consumer behavior through innovative demand management and adaptive pricing schemes [1,2,3]. The WISDOM concept centres on the integration of water distribution, sensor monitoring and communication systems coupled with semantic modelling (using ontologies, potentially connected to BIM, to serve as intelligent linkages throughout the entire framework) and control capabilities to provide for near real-time management of urban water resources. Fundamental to this framework are the needs and operational requirements of users and stakeholders at domestic, corporate and city levels and this requires the interoperability of a number of demand and operational models, fed with data from diverse sources such as sensor networks and crowsourced information. This has implications regarding the provenance and trustworthiness of such data and how it can be used in not only the understanding of system and user behaviours, but more importantly in the real-time control of such systems. Adaptive and intelligent analytics will be used to produce decision support systems that will drive the ability to increase the variability of both supply and consumption [3]. This in turn paves the way for adaptive pricing incentives and a greater understanding of the water-energy nexus. This integration is complex and uncertain yet being typical of a cyber-physical system, and its relevance transcends the water resource management domain. The WISDOM framework will be modeled and simulated with initial testing at an experimental facility in France (AQUASIM – a full-scale test-bed facility to study sustainable water management), then deployed and evaluated in in two pilots in Cardiff (UK) and La Spezia (Italy). These demonstrators will evaluate the integrated concept providing insight for wider adoption.

Diversidad genética de aislamientos de Bacillus subtilis con potencial para el control biológico de Colletotrichum acutatum y Guignardia citricarpa

O setor citrícola enfrenta sérios problemas representados por doenças de flores e frutos jovens que, além de diminuir a produtividade, depreciam os frutos pelo aspecto que conferem aos mesmos. Tais doenças são representadas, principalmente, pela mancha preta dos frutos cítricos (MPC) e pela queda prematura dos frutos cítricos (QPFC), onde a medida predominante de controle é a pulverização com produtos químicos. Entretanto, os custos financeiros e ambientais de aplicações com tais produtos, aliado às crescentes restrições à presença de resíduos, estão a exigir o estudo de novas alternativas. Entre estas, o controle biológico surge como alternativa importante. Sabendo-se que, o conhecimento da biodiversidade dos seres vivos é importante para determinação de suas funções potenciais, o presente trabalho teve por objetivo estudar a diversidade genética, através de marcadores moleculares AFLP, de 32 isolados de B. subtilis com a finalidade de se encontrar, dentre os mesmos, um (ou mais isolados) que apresentasse maior similaridade com o isolado ACB-69, o qual apresenta potencial para o controle da doença. Diante disso, os resultados obtidos neste trabalho, permitiram concluir que: a) os isolados de B. subtilis estudados agruparam-se no filograma de distância genética, independente da procedência ou do hospedeiro; b) os isolados ACB-69 e ACB-83, com potenciais para o controle da queda prematura dos frutos cítricos, compartilham da mesma ancestralidade, o que pode ser inferido pela metodologia aplicada; c) em termos biológicos; o isolado ACB-83 merece mais estudos quanto à viabilidade de controle de doenças de citros, como a queda prematura dos frutos cítricos e a manha preta dos frutos cítricos, sob condições de campo.

Design of a control system using linear matrix inequalities for the active vibration control of a plate

The study of algorithms for active vibration control in smart structures is an area of interest, mainly due to the demand for better performance of mechanical systems, such as aircraft and aerospace structures. Smart structures, formed using actuators and sensors, can improve the dynamic performance with the application of several kinds of controllers. This article describes the application of a technique based on linear matrix inequalities (LMI) to design an active control system. The positioning of the actuators, the design of a robust state feedback controller and the design of an observer are all achieved using LMI. The following are considered in the controller design: limited actuator input, bounded output (energy) and robustness to parametric uncertainties. Active vibration control of a flat plate is chosen as an application example. The model is identified using experimental data by an eigensystem realization algorithm (ERA) and the placement of the two piezoelectric actuators and single sensor is determined using a finite element model (FEM) and an optimization procedure. A robust controller for active damping is designed using an LMI framework, and a reduced model with observation and control spillover effects is implemented using a computer. The simulation results demonstrate the efficacy of the approach, and show that the control system increases the damping in some of the modes.

Evolving Future Internet clean-slate Entity Title Architecture with quality-oriented control-plane extensions

A Internet atual vem sofrendo vários problemas em termos de escalabilidade, desempenho, mobilidade, etc., devido ao vertiginoso incremento no número de usuários e o surgimento de novos serviços com novas demandas, propiciando assim o nascimento da Internet do Futuro. Novas propostas sobre redes orientadas a conteúdo, como a arquitetura Entidade Titulo (ETArch), proveem novos serviços para este tipo de cenários, implementados sobre o paradigma de redes definidas por software. Contudo, o modelo de transporte do ETArch é equivalente ao modelo best-effort da Internet atual, e vem limitando a confiabilidade das suas comunicações. Neste trabalho, ETArch é redesenhado seguindo o paradigma do sobreaprovisionamento de recursos para conseguir uma alocação de recursos avançada integrada com OpenFlow. Como resultado, o framework SMART (Suporte de Sessões Móveis com Alta Demanda de Recursos de Transporte), permite que a rede defina semanticamente os requisitos qualitativos das sessões para assim gerenciar o controle de Qualidade de Serviço visando manter a melhor Qualidade de Experiência possível. A avaliação do planos de dados e de controle teve lugar na plataforma de testes na ilha do projeto OFELIA, mostrando o suporte de aplicações móveis multimídia com alta demanda de recursos de transporte com QoS e QoE garantidos através de um esquema de sinalização restrito em comparação com o ETArch legado

Drought tolerance is associated with rooting depth and stomatal control of water use in clones of Coffea canephora

center dot Background and Aims Drought is a major environmental constraint affecting growth and production of Coffea canephora. Selection of C. canephora clones has been largely empirical as little is known about how clones respond physiologically to drought. Using clones previously shown to differ in drought tolerance, this study aimed to identify the extent of variation of water use and the mechanisms responsible, particularly those associated morphological traits.center dot Methods Clones (14 and 120, drought-tolerant; 46 and 109A, drought-sensitive, based on their abilities to yield under drought) were grown in 120-L pots until they were 12-months old, when an irrigation and a drought treatment were applied; plants were droughted until the pressure potential (Psi(x)) before dawn (pre-dawn) reached -3.0 MPa. Throughout the drought period, Psi(x) and stomatal conductance (g(s)) were measured. At the end of the experiment, carbon isotope ratio and parameters from pressure-volume curves were estimated. Morphological traits were also assessed.center dot Key Results and Conclusions With irrigation, plant hydraulic conductance (K-L), midday Psi(x) and total biomass were all greater in clones 109A and 120 than in the other clones. Root mass to leaf area ratio was larger in clone 109A than in the others, whereas rooting depth was greater in drought-tolerant than in drought-sensitive clones. Predawn Psi(x) of -3.0 MPa was reached fastest by 109A, followed progressively by clones 46, 120 and 14. Decreases in g(s) with declining Psi(x), or increasing evaporative demand, were similar for clones 14, 46, and 120, but lower in 109A. Carbon isotope ratio increased under drought; however, it was lower in 109A than in other clones. For all clones, Psi(x), g(s) and KL recovered rapidly following re-watering. Differences in root depth, KL and stomatal control of water use, but not osmotic or elastic adjustments, largely explained the differences in relative tolerance to drought stress of clones 14 and 120 compared with clones 46 and 109A.

An hydrochemical answer to a legislative demand involving health risk related to water quality

Effluents and surface waters around an area involved with the inking of tissues at Itatiba municipality, São Paulo State, Brazil, were chemically analyzed with the purpose of evaluating the influence on the water quality of the chemicals released, as well to provide answers to legislative requirements related to the São Paulo State Register 997 published on 31 May 1976.

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.

Meta-analysis of the income and price elasticities of gasoline demand: public policy implications for Latin America

By means of a meta-analysis, this article sets out to estimate average values for the income and price elasticities of gasoline demand and to analyse the reasons for the variations in the elasticities reported by the literature. The findings show that there is publication bias, that the volatility of elasticity estimates is not due to sampling errors alone, and that there are systematic factors explaining these differences. The income and price elasticities of gasoline demand differ between the short and long run and by region, and the estimation can appropriately include the vehicle fleet and the prices of substitute goods, the data types and the estimation methods used. The presence of a low price elasticity suggests that a fuel tax will be inadequate to control rising consumption in a context of rapid economic growth.

Loss of the Ability to Control Right-to-Left Shunt Does Not Influence the Metabolic Responses to Temperature Change or Long-Term Fasting in the South American Rattlesnake Crotalus durissus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential use of bioagents in the control of postharvest rot in melon

Rot caused by Fusarium pallidoroseum has had a severely negative impact on the export of melons from Brazil. Uncertainty regarding the health of the fruit due to the quiescent infection of the pathogen has led producers to use fungicides in the postharvest treatment of the fruit, thereby causing contamination and risking the health of consumers. Consequently, there is a demand for clean and safe natural technologies for the postharvest treatment of melons, including biological control. The present study aimed at evaluating bioagents for use in controlling Fusarium rot in 'Galia'melon. The following bioagents were evaluated: two isolates of Bacillus subtilis, B. licheniformis and a mixture of B. subtilis and B. licheniformis, as well as the yeasts Sporidiobolus pararoseus, Pichia spp., Pichia membranifaciens, P. guilliermondii, Sporobolomyces roseus, Debaryomyces hansenii and Rhodotorula mucilagenosa. Treatment with imazalil and water were used as controls. Two experiments were conducted in a completely randomised design with 10 replicates per treatment with four fruit per replicate; the disease incidence was evaluated in the first experiment, and the disease severity was evaluated in the second. Similarity analysis of the temporal evolution profiles of rot incidence caused by F. pallidoroseum allowed the evaluated treatments to be clustered into four groups. In the first experiment, the yeasts P. membranifaciens and D. hansenii produced results similar to that of the fungicide imazalil. The second experiment highlighted the yeasts P. guilliermondii and R. mucilaginosa. Electron microscopy studies confirmed that once applied to the fruit, the yeasts colonised the skin and damaged the pathogen mycelium; the action of the yeasts affected the mycelium of F. pallidoroseum, which had infected wounds on the fruit's surface. Bacillus spp. did not provide good disease control. These results demonstrated that yeasts have the potential to control postharvest rot caused by F. pallidoroseum in 'Galia'melon.

Does diatomaceous earth control leaf-cutter ants (Hymenoptera: Formicidae) in the Eucalyptus plantations?

Genus Atta includes some of the most important Formicidae leaf cutter ants which cause extensive damage to the eucalyptus plantations. Atta sexdens rubropilosa Forel, one of the chief pests in Brazilian reforestation, can restrict and reduce forest productivity by its intense and constant leaf-cutting activities on plants at all stages. Therefore, the demand for new products to control A. sexdens rubropilosa indicates the study of the utilization of the dry powder formulation of diatomaceous earth (DE) against this pest in the eucalyptus cultivars. The study was conducted using 120 colonies of A. sexdens rubropilosa in Eucalyptus grandis Hill ex. Maiden x Eucalyptus urophylla Blake (Myrtaceae) (urograndis) stand. The randomized block experimental design was used with six treatments (1, 10, 25, and 50 g/m2 of DE, 6.0 g/m2 sulfluramid bait per square meter of loose soil, and the control) with five replications, each with four colonies of this ant. Diatomaceous earth was applied to the active A. sexdens rubropilosa ant holes, and the sulfluramid bait was applied in bulk in a localized manner. The control efficacy of A. sexdens rubropilosa with DE was low, showing values similar to that of the control, and, for this reason, it cannot be used to control this ant. The bait with sulfluramid showed higher efficacy than those of the other treatments.