Experimental and numerical investigations on dissolution and recrystallization processes of GaSb/InSb/GaSb under microgravity and terrestrial conditions

The effects of gravity and crystal orientation on the dissolution of GaSb into InSb melt and the recrystallization of InGaSb were investigated under microgravity condition using a Chinese recoverable satellite and under normal gravity condition on earth. To investigate the effect of gravity on the solid/liquid interface and compositional profiles. a numerical simulation was carried out. The InSb crystal melted at 525 degrees C and then a part of GaSb dissolved into the InSb melt during heating to 706 degrees C and this process led to the formation of InGaSb solution. InGaSb solidified during the cooling process. The experimental and calculation results clearly show that the shape of the solid/liquid interface and compositional profiles in the solution were significantly affected by gravity. Under microgravity, as the Ga compositional profiles were uniform in the radial direction. the interfaces were almost parallel. On the contrary, for normal gravity condition, as large amounts of Ga moved up in the upper region due to buoyancy, the dissolved zone broadened towards gravitational direction. Also. during the cooling process, needle crystals of InGaSb started appearing and the value of x of InxGa1-xSb crystals increased with the decrease of temperature. The GaSb with the (111)B plane dissolved into the InSb melt much more than that of the (111)A plane. (C) 2000 Elsevier Science B.V. All rights reserved.

A study on the dependence of the micro-pore configurations on the volatilization and the burn processes of the organic compounds in the matrix of molten carbonate fuel cells

The micro-pore configurations on the matrix surface were studied by SEM. The matrix of molten carbonate fuel cell (MCFC) performance was also improved by the better coordination between the reasonable radius of the micro-pores and the higher porosity of the cell matrix. The many and complicated micro-pore configurations in the cell matrix promoted the volatilization of the organic additives and the burn of polyvinyl butyral (PVB). The smooth volatilization of the organic additives and the complete burn of PVB were the significant factors for the improved MCFC performance. Oxygen diffusion controlled-burn mechanism of PVB in the cell matrix was proposed. (C) 2002 Published by Elsevier Science Ltd.

Novel processes, test structures and characterisation for future germanium technologies

In order to widely use Ge and III-V materials instead of Si in advanced CMOS technology, the process and integration of these materials has to be well established so that their high mobility benefit is not swamped by imperfect manufacturing procedures. In this dissertation number of key bottlenecks in realization of Ge devices are investigated; We address the challenge of the formation of low resistivity contacts on n-type Ge, comparing conventional and advanced rapid thermal annealing (RTA) and laser thermal annealing (LTA) techniques respectively. LTA appears to be a feasible approach for realization of low resistivity contacts with an incredibly sharp germanide-substrate interface and contact resistivity in the order of 10 -7 Ω.cm2. Furthermore the influence of RTA and LTA on dopant activation and leakage current suppression in n+/p Ge junction were compared. Providing very high active carrier concentration > 1020 cm-3, LTA resulted in higher leakage current compared to RTA which provided lower carrier concentration ~1019 cm-3. This is an indication of a trade-off between high activation level and junction leakage current. High ION/IOFF ratio ~ 107 was obtained, which to the best of our knowledge is the best reported value for n-type Ge so far. Simulations were carried out to investigate how target sputtering, dose retention, and damage formation is generated in thin-body semiconductors by means of energetic ion impacts and how they are dependent on the target physical material properties. Solid phase epitaxy studies in wide and thin Ge fins confirmed the formation of twin boundary defects and random nucleation growth, like in Si, but here 600 °C annealing temperature was found to be effective to reduce these defects. Finally, a non-destructive doping technique was successfully implemented to dope Ge nanowires, where nanowire resistivity was reduced by 5 orders of magnitude using PH3 based in-diffusion process.

Microscopic theory for random processes in weakly-coupled open systems

In order to relate macroscopic random motion (described e.g. by Langevin-type theories) to microscopic dynamics, we have undertaken the derivation of a Fokker-Planck-type equation from first microscopic principles. Both subsystems are subject to an external force field. Explicit expressions for the diffusion and drift coefficients are obtained, in terms of the field.

Characterization of physio-chemical processes and hydration kinetics in concretes containing supplementary cementitious materials using electrical property measurements

The current study monitors both the short- and long-term hydration characteristics of concrete using discretized conductivity measurements from initial gauging, through setting and hardening, the latter comprising both the curing and post-curing periods. In particular, attention is directed to the near-surface concrete as it is this zone which protects the steel from the external environment and has a major influence on durability, performance and service-life. A wide range of concrete mixes is studied comprising both plain Portland cement concretes and concretes containing fly-ash and ground granulated blast furnace slag. The parameter normalised conductivity was used to identify four distinct stages in the hydration process and highlight the influence of supplementary cementitious materials (SCM) on hydration and hydration kinetics. A relationship has been presented to account for the temporal decrease in conductivity, post 10-days hydration. The testing procedure and methodology presented lend itself to in-situ monitoring of reinforced concrete structures. (c) 2013 Elsevier Ltd. All rights reserved.

Le recours à des environnements numériques pour la diffusion de connaissances relatives au patrimoine bâti: une exploration du potentiel de la modélisation de systèmes typologiques

Un fichier intitulé Charbonneau_Nathalie_2008_AnimationAnnexeT accompagne la thèse. Il contient une séquence animée démontrant le type de parcours pouvant être effectué au sein des environnements numériques développés. Il s'agit d'un fichier .wmv qui a été compressé.

La romanisation de l'Afrique romaine à travers la diffusion et l'évolution de la citoyenneté romaine, de la République à Caracalla: les cas de Thugga et Lepcis Magna

Le phénomène de la romanisation étant des plus complexe, il est donc nécessaire de se concentrer sur un seul de ses aspects, mais aussi sur un espace géographique restreint : la diffusion de la citoyenneté romaine en Afrique proconsulaire. Quels sont ses mécanismes et ses processus? Quels sont les motifs pour Rome ou pour les indigènes? Finalement, quels sont les impacts de cette diffusion sur les individus ainsi que sur leur cité? Ultimement, y a-t-il eu une romanisation de l’Afrique par la diffusion de la citoyenneté romaine? Voilà les questions qui ont été posées à travers l’étude des cas de Thugga et de Lepcis Magna. Finlement, il semble que l’empereur ainsi que les notables locaux furent des moteurs importants de cette diffusion, que les motifs pouvaient être stratégiques ou culturels pour l’empereur, mais surtout fiscaux pour les notables et que le principal impact, autant sur les individus que sur la cité, fut bel et bien la transformation, voire la romanisation juridique, de l’Afrique romaine.

L’adaptation de l’agriculture au changement et à la variabilité climatiques au Québec : un processus de diffusion des innovations

Au-delà des variables climatiques, d’autres facteurs non climatiques sont à considérer dans l’analyse de la vulnérabilité et de l’adaptation au changement et variabilité climatiques. Cette mutation de paradigme place l’agent humain au centre du processus d’adaptation au changement climatique, notamment en ce qui concerne le rôle des réseaux sociaux dans la transmission des nouvelles idées. Dans le domaine de l’agriculture, le recours aux innovations est prôné comme stratégie d’adaptation. L’élaboration et l’appropriation de ces stratégies d’adaptation peuvent être considérées comme des processus d’innovation qui dépendent autant du contexte social et culturel d’un territoire, de sa dynamique, ainsi que de la stratégie elle-même. Aussi, l’appropriation et la diffusion d’une innovation s’opèrent à partir d’un processus décisionnel à l’échelle de l’exploitation agricole, qui à son tour, demande une compréhension des multiples forces et facteurs externes et internes à l’exploitation et les multiples objectifs de l’exploitant. Ainsi, la compréhension de l’environnement décisionnel de l’exploitant agricole à l’échelle de la ferme est vitale, car elle est un préalable incontournable au succès et à la durabilité de toute politique d’adaptation de l’agriculture. Or, dans un secteur comme l’agriculture, il est reconnu que les réseaux sociaux par exemple, jouent un rôle crucial dans l’adaptation notamment, par le truchement de la diffusion des innovations. Aussi, l’objectif de cette recherche est d’analyser comment les exploitants agricoles s’approprient et conçoivent les stratégies d’adaptation au changement et à la variabilité climatiques dans une perspective de diffusion des innovations. Cette étude a été menée en Montérégie-Ouest, région du sud-ouest du Québec, connue pour être l’une des plus importantes régions agricoles du Québec, en raison des facteurs climatiques et édaphiques favorables. Cinquante-deux entrevues ont été conduites auprès de différents intervenants à l’agriculture aux niveaux local et régional. L’approche grounded theory est utilisée pour analyser, et explorer les contours de l’environnement décisionnel des exploitants agricoles relativement à l’utilisation des innovations comme stratégie d’adaptation. Les résultats montrent que les innovations ne sont pas implicitement conçues pour faire face aux changements et à la variabilité climatiques même si l’évolution du climat influence leur émergence, la décision d’innover étant largement déterminée par des considérations économiques. D’autre part, l‘étude montre aussi une faiblesse du capital sociale au sein des exploitants agricoles liée à l’influence prépondérante exercée par le secteur privé, principal fournisseur de matériels et intrants agricoles. L’influence du secteur privé se traduit par la domination des considérations économiques sur les préoccupations écologiques et la tentation du profit à court terme de la part des exploitants agricoles, ce qui pose la problématique de la soutenabilité des interventions en matière d’adaptation de l’agriculture québécoise. L’étude fait ressortir aussi la complémentarité entre les réseaux sociaux informels et les structures formelles de soutien à l’adaptation, de même que la nécessité d’établir des partenariats. De plus, l’étude place l’adaptation de l’agriculture québécoise dans une perspective d’adaptation privée dont la réussite repose sur une « socialisation » des innovations, laquelle devrait conduire à l’émergence de processus institutionnels formels et informels. La mise en place de ce type de partenariat peut grandement contribuer à améliorer le processus d’adaptation à l’échelle locale.

Microstructural evolution of primary crystallization in diffusion-controlled grain growth

A model has been developed for evaluating grain size distributions in primary crystallizations where the grain growth is diffusion controlled. The body of the model is grounded in a recently presented mean-field integration of the nucleation and growth kinetic equations, modified conveniently in order to take into account a radius-dependent growth rate, as occurs in diffusion-controlled growth. The classical diffusion theory is considered, and a modification of this is proposed to take into account interference of the diffusion profiles between neighbor grains. The potentiality of the mean-field model to give detailed information on the grain size distribution and transformed volume fraction for transformations driven by nucleation and either interface- or diffusion-controlled growth processes is demonstrated. The model is evaluated for the primary crystallization of an amorphous alloy, giving an excellent agreement with experimental data. Grain size distributions are computed, and their properties are discussed.

Analytical Studies on Diffusion and lntermittency in Chaotic Maps

The study of simple chaotic maps for non-equilibrium processes in statistical physics has been one of the central themes in the theory of chaotic dynamical systems. Recently, many works have been carried out on deterministic diffusion in spatially extended one-dimensional maps This can be related to real physical systems such as Josephson junctions in the presence of microwave radiation and parametrically driven oscillators. Transport due to chaos is an important problem in Hamiltonian dynamics also. A recent approach is to evaluate the exact diffusion coefficient in terms of the periodic orbits of the system in the form of cycle expansions. But the fact is that the chaotic motion in such spatially extended maps has two complementary aspects- - diffusion and interrnittency. These are related to the time evolution of the probability density function which is approximately Gaussian by central limit theorem. It is noticed that the characteristic function method introduced by Fujisaka and his co-workers is a very powerful tool for analysing both these aspects of chaotic motion. The theory based on characteristic function actually provides a thermodynamic formalism for chaotic systems It can be applied to other types of chaos-induced diffusion also, such as the one arising in statistics of trajectory separation. It was noted that there is a close connection between cycle expansion technique and characteristic function method. It was found that this connection can be exploited to enhance the applicability of the cycle expansion technique. In this way, we found that cycle expansion can be used to analyse the probability density function in chaotic maps. In our research studies we have successfully applied the characteristic function method and cycle expansion technique for analysing some chaotic maps. We introduced in this connection, two classes of chaotic maps with variable shape by generalizing two types of maps well known in literature.

Option pricing in market models driven by telegraph processes with jumps

Esta tesis está dividida en dos partes: en la primera parte se presentan y estudian los procesos telegráficos, los procesos de Poisson con compensador telegráfico y los procesos telegráficos con saltos. El estudio presentado en esta primera parte incluye el cálculo de las distribuciones de cada proceso, las medias y varianzas, así como las funciones generadoras de momentos entre otras propiedades. Utilizando estas propiedades en la segunda parte se estudian los modelos de valoración de opciones basados en procesos telegráficos con saltos. En esta parte se da una descripción de cómo calcular las medidas neutrales al riesgo, se encuentra la condición de no arbitraje en este tipo de modelos y por último se calcula el precio de las opciones Europeas de compra y venta.

The effect of aqueous diffusion on the fractionation of chlorine and bromine stable isotopes

Diffusive isotopic fractionation factors are important in order to understand natural processes and have practical application in radioactive waste storage and carbon dioxide sequestration. We determined the isotope fractionation factors and the effective diffusion coefficients of chloride and bromide ions during aqueous diffusion in polyacrylamide gel. Diffusion was determined as functions of temperature, time and concentration. The effect of temperature is relatively large on the diffusion coefficient (D) but only small on isotope fractionation. For chlorine, the ratio, D-35cl/D-37cl varied from 1.00128 +/- 0.00017 (1 sigma) at 2 degrees C to 1.00192 +/- 0.00015 at 80 degrees C. For bromine, D-79Br/D-81Br varied from 1.00098 +/- 0.00009 at 2 degrees C to 1.0064 +/- 0.00013 at 21 degrees C and 1.00078 +/- 0.00018 (1 sigma) at 80 degrees C. There were no significant effects on the isotope fractionation due to concentration. The lack of sensitivity of the diffusive isotope fractionation to anything at the most common temperatures (0 to 30 C) makes it particularly valuable for application to understanding processes in geological environments and an important natural tracer in order to understand fluid transport processes. (C) 2009 Elsevier Ltd. All rights reserved.

The influence of physical processes on extratropical singular vectors

An investigation is made of the impact of a full linearized physical (moist) parameterization package on extratropical singular vectors (SVs) using the ECMWF integrated forecasting system (IFS). Comparison is made for one particular period with a dry physical package including only vertical diffusion and surface drag. The crucial extra ingredient in the full package is found to be the large-scale latent heat release. Consistent with basic theory, its inclusion results in a shift to smaller horizontal scales and enhanced growth for the SVs. Whereas, for the dry SVs, T42 resolution is sufficient, the moist SVs require T63 to resolve their structure and growth. A 24-h optimization time appears to be appropriate for the moist SVs because of the larger growth of moist SVs compared with dry SVs. Like dry SVs, moist SVs tend to occur in regions of high baroclinicity, but their location is also influenced by the availability of moisture. The most rapidly growing SVs appear to enhance or reduce large-scale rain in regions ahead of major cold fronts. The enhancement occurs in and ahead of a cyclonic perturbation and the reduction in and ahead of an anticyclonic perturbation. Most of the moist SVs for this situation are slightly modified versions of the dry SVs. However, some occur in new locations and have particularly confined structures. The most rapidly growing SV is shown to exhibit quite linear behavior in the nonlinear model as it grows from 0.5 to 12 hPa in 1 day. For 5 times this amplitude the structure is similar but the growth is about half as the perturbation damps a potential vorticity (PV) trough or produces a cutoff, depending on its sign.

Establishing a connection between knowledge transfer and innovation diffusion

Successful innovation diffusion process may well take the form of knowledge transfer process. Therefore, the primary objectives of this paper include: first, to evaluate the interrelations between transfer of knowledge and diffusion of innovation; and second to develop a model to establish a connection between the two. This has been achieved using a four-step approach. The first step of the approach is to assess and discuss the theories relating to knowledge transfer (KT) and innovation diffusion (ID). The second step focuses on developing basic models for KT and ID, based on the key theories surrounding these areas. A considerable amount of literature has been written on the association between knowledge management and innovation, the respective fields of KT and ID. The next step, therefore, explores the relationship between innovation and knowledge management in order to identify the connections between the latter, i.e. KT and ID. Finally, step four proposes and develops an integrated model for KT and ID. As the developed model suggests the sub-processes of knowledge transfer can be connected to the innovation diffusion process in several instances as discussed and illustrated in the paper.