Família de retificadores multipulsos com topologias diferenciais de transformadores

Multipulse rectifier topologies based on auto-connections or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies are becoming increasingly attractive not only for robustness, but to mitigate many low order current harmonics in the utility, reducing the total harmonic distortion of the line currents (THDi) and increasing the power factor requirements. Unlike isolated connections (delta-wye, zigzag, etc.), when the differential transformer is employed, most of the energy required by the load is directly conducted through the windings. Thus, only a small fraction of the kVA is processed by the magnetic core. This feature increases the power density of the converter. This paper presents a mathematical model based on phasor diagrams, which results in a single expression able to merge all differential connections (wye and delta), for both step-up and step-down rectifiers for 12 or 18 pulses. The proposed family of converters can be designed for any relationship between the line input voltage and the DC voltage, unlike the conventional phase-shift voltage connections. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18-pulse rectifiers with Wye or Delta-differential connections, keeping the original values for the input and load voltages. The simple and fast design procedure is developed and tested for a prototype rating 6 kW and 400 V on DC load.

A new design methodology for multipulse rectifiers with Delta auto-connected transformers and a retrofit application in Adjustable Speed Drives (ASDs)

Multipulse rectifiers can replace a conventional six pulse three-phase rectifier (diode bridge) providing a DC voltage with low ripple, low Total Harmonic Distortion of current (THDi) and a high Power Factor (PF). In this context is presented a multipulse rectifier with generalized Delta-differential autotransformer topology, which can provide any level of DC output voltage for any level of three-phase AC input voltage. This paper presents all the possible configurations for Delta topology in order to choose, through graphics, one configuration that presents reduced weight and volume. The average voltage on the DC bus must be compatible with the DC voltage in the six pulse rectifier used in commercial ASDs. Therefore, it is possible to apply the retrofit technique to replace the conventional bridge rectifier by the proposed multipulse rectifier. Based on mathematic models and simulation results, an 18-pulse rectifier with Delta topology, 220 V of line voltage, 315 V of DC output, and rating 2.5 kW of power was designed, implemented and applied for three different commercial ASDs. Experimental results as voltage and current waveforms and results about PF and THDi will be presented. © 2012 IEEE.

Degradation analysis of the SnO2 and ZnO-based varistors using electrostatic force microscopy

The degradation phenomena of ZnO and SnO2-based varistors were investigated for two different degradation methods: DC voltage at increased temperature and degradation with 8/20 μs pulsed currents (lightning type). Electrostatic force microscopy (EFM) was used to analyze the surface charge accumulated at grain-boundary regions before and after degradation. Before the degradation process, 85% of the barriers are active in the SnO2 system, while the ZnO system presents only 30% effective barriers. Both systems showed changes in the electrical behavior when degraded with pulses. In the case of the ZnO system, the behavior after pulse degradation was essentially ohmic due to the destruction of barriers (about 99% of the interfaces are conductive). After the degradation with 8/20 μs pulsed currents, the SnO2 system still presents nonohmic behavior with a significant decrease in the quantity of effective barriers (from 85% to 5%). However, when the degradation is accomplished with continuous current, the SnO2 system exhibits minimum variation, while the ZnO system degrades from 30% to 5%. This result indicates the existence of metastable defects of low concentration and/or low diffusion in the SnO2 system. High energy is necessary to degrade the barriers due to defect annihilation in the SnO2 system. © 2013 The American Ceramic Society.

Um novo sistema de refrigeração com controle de temperatura, compressor aberto, máquina de indução trifásica com velocidade variável e correção ativa do fator de potência do estágio de entrada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação do eletrocapilaridade na manipulação de microgotas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fluxo de potência ótimo em sistemas multimercados através de um algorítmo evolutivo multiobjetivo

Pós-graduação em Engenharia Elétrica - FEIS

Estudo da orientação dipolar fotoassistida de grupos azobenzênicos em filmes finos através de medidas da atividade eletro-óptica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de magnetorresistores no desenvolvimento de novas técnicas para aplicações em gastroenterologia

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Melhoria nas forças restaurativas do equilíbrio do gerador de indução duplamente alimentado por meio de controle da tensão interna

Pós-graduação em Engenharia Elétrica - FEIS

A low-power silicon-on-insulator PWM discriminator for biomedical applications

A CMOS/SOI circuit to decode PWM signals is presented as part of a body-implanted neurostimulator for visual prosthesis. Since encoded data is the sole input to the circuit, the decoding technique is based on a double-integration concept and does not require dc filtering. Nonoverlapping control phases are internally derived from the incoming pulses and a fast-settling comparator ensures good discrimination accuracy in the megahertz range. The circuit was integrated on a 2 mu m single-metal SOI fabrication process and has an effective area of 2mm(2) Typically, the measured resolution of encoding parameter a was better than 10% at 6MHz and V-DD=3.3V. Stand-by consumption is around 340 mu W. Pulses with frequencies up to 15MHz and alpha = 10% can be discriminated for V-DD spanning from 2.3V to 3.3V. Such an excellent immunity to V-DD deviations meets a design specification with respect to inherent coupling losses on transmitting data and power by means of a transcutaneous link.

Tap-Off Power From the Overhead Shield Wires of an HV Transmission Line

In recent years, there was an increase of ancillary service loads, such as signaling systems, inspection robots, surveillance cameras, and other monitoring devices distributed along high-voltage transmission lines which require low-power dc voltage supplies. This paper investigates the use of the induced voltage in the shield wires of an overhead 525 kV transmission line as a primary power source. Since phase current variations throughout the day affect the induced voltage in the overhead ground wire, a step-down dc-dc converter is used after rectification of the ac voltage to provide a regulated dc output voltage. The initial encouraging results obtained indicate that this form of power supply can be a feasible and cost-effective alternative for feeding small ancillary service loads. The simulation results are validated by field measurements as well as the installation of a 200 W voltage stabilization system prototype.

Induktion tolerogener dendritischer Zellen zur Suppression von experimenteller autoimmuner Enzephalomyelitis und Kontaktallergie

Dendritische Zellen (DC) spielen als professionelle antigenpräsentierende Zellen (APC) eine zentrale Rolle in der Aktivierung und Regulierung antigenspezifischer Immunantworten. Aus diesem Grund wird der therapeutische Einsatz von DC zur Behandlung von Autoimmunerkrankungen und Allergien sowie zur Tumorbekämpfung erforscht. Im ersten Teil der vorliegenden Arbeit untersuchten wir das Potenzial einer biolistischen DNA-Vakzinierung zur Induktion tolerogener DC in vivo. Im Tiermodell der Myelin-Oligodendrozyten-Glykoprotein Peptid 35-55 (MOGp35-55) induzierten experimentellen autoimmunen Enzephalomyelitis (EAE) sollte mittels präventiver biolistischer Kovakzinierung von Plasmid-DNA kodierend für MOG und die immunregulatorischen Zytokine TGFβ oder IL-10 eine protektive Immunität induziert werden. Die MOG-Expression stand dabei entweder unter der Kontrolle des ubiquitär aktiven CMV-Promotors oder des murinen Fascin-Promotors, um eine ektopische MOG-Expression spezifisch in dermalen DC und Langerhanszellen zu erreichen. Dass MOGp35-55-präsentierende DC nach biolistischer DNA-Vakzinierung von der Haut in die drainierenden Lymphknoten migrieren und dort T-Zellen aktivieren, konnte im Vorfeld anhand einer substanziellen Proliferation von MOGp35-55-reaktiven 2D2 T-Zellen nachgewiesen werden. Im präventiven Ansatz der MOGp35-55-induzierten EAE zeigten Mäuse, die mit MOG-kodierenden Plasmiden biolistisch transfiziert wurden, eine leicht reduzierte EAE-Symptomatik. Die Kotransfektion von MOG und TGFβ führte zu einer Verstärkung der EAE-Suppression – unabhängig davon, ob die MOG-Expression unter der Kontrolle des CMV- oder des Fascin-Promotors stand. Interessanterweise resultierte die Koapplikation von MOG- und IL-10-kodierender Plasmid-DNA nur bei DC-fokussierter MOG-Expression zu reduzierter EAE-Symptomatik. Für biolistische DNA-Vakzinierungen stellt somit der Fascin-Promotor eine potente Alternative zu viralen Promotoren dar. Entsprechend der milderen EAE-Symptome beobachteten wir bei behandelten EAE-Mäusen einen geringeren Grad an Demyelinisierung sowie eine reduzierte Infiltration des ZNS mit IFNγ-produzierenden CD4+ Th1- und IL-17-produzierenden CD4+ Th17-Zellen. Desweiteren zeigten Milzzellen ex vivo nach MOGp35-55-Restimulation eine inhibierte Proliferation und eine signifikant reduzierte IFNγ- und IL-17-Zytokinproduktion. Überraschenderweise ging die antigenspezifische Immunsuppression nicht mit der Expansion von Foxp3+ regulatorischen T-Zellen einher. Da die Milzen aber erhöhte Mengen an CD8+IFNγ+ T-Zellen aufweisen, könnte ein zytotoxisch-suppressiver Mechanismus für die Inhibition der Th1- und Th17-Immunantwort verantwortlich sein. Nachfolgende Untersuchungen sind notwendig, um die induzierten immunologischen Mechansimen mittels biolistischer DNA-Vakzinierung aufzuklären. Der zweite Teil der Arbeit befasst sich mit der Generierung von tolerogenen DC in vitro. Dafür wurden murine Knochenmarkszellen unter DC-differenzierenden Bedingungen in Gegenwart des synthetischen Glucocorticoids Dexamethason (DEX) kultiviert. Die DEX-Zugabe führte zur Differenzierung von APC mit geringer CD11c-Expression. DEX-APC waren in vitro weitestgehend gegen LPS stimulierungsresistent und zeigten eine reduzierte Expression von MHC-II und den kostimulatorischen Molekülen CD80, CD86 und CD40. Ihrem tolerogenen Phänotyp entsprechend besaßen DEX-APC ein geringeres syngenes T-Zellstimulierungspotenzial als unbehandelte BM-DC. Anhand der erhöhten Oberflächenexpression von CD11b, GR1 und F4/80 besteht eine phänotypische Ähnlichkeit zu myeloiden Suppressorzellen. Die Fähigkeit von DEX-APC in vivo antigenspezifische Toleranz zu induzieren, wurde durch einen therapeutischen Ansatz im murinen Krankheitsmodell der Kontaktallergie überprüft. Die therapeutische Applikation von DEX-APC führte hierbei im Vergleich zur Applikation von PBS oder unbehandelten BM-DC zu einer signifikant reduzierten Ohrschwellungsreaktion. Zusammenfassend demonstrieren die Ergebnisse dieser Arbeit, dass potente tolerogene DC sowohl in vivo als auch in vitro induziert werden können. Dass diese Zellpopulation effektiv antigenspezifische Immunreaktionen supprimieren kann, macht sie zu einem vielversprechenden Werkzeug in der Behandlung von Autoimmunerkrankungen und Allergien.rn

IN-SITU TEM PLASMA CHIP NANOFABRICATION AND CHARACTERIZATION

A silicon-based microcell was fabricated with the potential for use in in-situ transmission electron microscopy (TEM) of materials under plasma processing. The microcell consisted of 50 nm-thick film of silicon nitride observation window with 60μm distance between two electrodes. E-beam scattering Mont Carlo simulation showed that the silicon nitride thin film would have very low scattering effect on TEM primary electron beam accelerated at 200 keV. Only 4.7% of primary electrons were scattered by silicon nitride thin film and the Ar gas (60 μm thick at 1 atm pressure) filling the space between silicon nitride films. Theoretical calculation also showed low absorption of high-energy e-beam electrons. Because the plasma cell needs to survive the high vacuum TEM chamber while holding 1 atm internal pressure, a finite element analysis was performed to find the maximum stress the low-stress silicon nitride thin film experienced under pressure. Considering the maximum burst stress of low-stress silicon nitride thin film, the simulation results showed that the 50 nm silicon nitride thin film can be used in TEM under 1 atm pressure as the observation window. Ex-situ plasma generation experiment demonstrated that air plasma can be ignited at DC voltage of 570. A Scanning electron microscopy (SEM) analysis showed that etching and deposition occurred during the plasma process and larger dendrites formed on the positive electrode.

Improvement of the Dynamic Performance of a Multiphase Current Controlled Buck Converter using an Auxiliary Synchronous Buck Converter as an Additional Energy Path

This work is related to the output impedance improvement of a Multiphase Buck converter with Peak Current Mode Control (PCMC) by means of introducing an additional power path that virtually increases the output capacitance during transients. Various solutions that can be employed to improve the dynamic behavior of the converter system exist, but nearly all solutions are developed for a Single Phase Buck converter with Voltage Mode Control (VMC), while in the VRM applications, due to the high currents, the system is usually implemented as a Multiphase Buck Converter with Current Mode Control. The additional energy path, as presented here, is introduced with the Output Impedance Correction Circuit (OICC) based on the Controlled Current Source (CCS). The OICC is used to inject or extract a current n-1 times larger than the output capacitor current, thus virtually increasing n times the value of the output capacitance during the transients. Furthermore, this work extends the OICC concept to a Multiphase Buck Converter system while comparing proposed solution with the system that has n times bigger output capacitor. In addition, the OICC is implemented as a Synchronous Buck Converter with PCMC, thus reducing its influence on the system efficiency.

Multiphase Current Controlled Buck Converter with energy recycling Output Impedance Correction Circuit (OICC)

This work is related to the output impedance improvement of a Multiphase Buck converter with Peak Current Mode Control (PCMC) by means of introducing an additional power path that virtually increases the output capacitance during transients. Various solutions that can be employed to improve the dynamic behavior of the converter system exist, but nearly all solutions are developed for a Single Phase Buck converter with Voltage Mode Control (VMC), while in the VRM applications, due to the high currents, the system is usually implemented as a Multiphase Buck Converter with Current Mode Control. The Output Impedance Correction Circuit (OICC) is used to inject or extract a current n-1 times larger than the output capacitor current, thus virtually increasing n times the value of the output capacitance during the transients. Furthermore, this work extends the OICC concept to a Multiphase Buck Converter system while comparing proposed solution with the system that has n times bigger output capacitor. In addition, the OICC is implemented as a Synchronous Buck Converter with PCMC, thus reducing its influence on the system efficiency