Tensile behaviour of a structural adhesive at high temperatures by the extended finite element method

Component joining is typically performed by welding, fastening, or adhesive-bonding. For bonded aerospace applications, adhesives must withstand high-temperatures (200°C or above, depending on the application), which implies their mechanical characterization under identical conditions. The extended finite element method (XFEM) is an enhancement of the finite element method (FEM) that can be used for the strength prediction of bonded structures. This work proposes and validates damage laws for a thin layer of an epoxy adhesive at room temperature (RT), 100, 150, and 200°C using the XFEM. The fracture toughness (G Ic ) and maximum load ( ); in pure tensile loading were defined by testing double-cantilever beam (DCB) and bulk tensile specimens, respectively, which permitted building the damage laws for each temperature. The bulk test results revealed that decreased gradually with the temperature. On the other hand, the value of G Ic of the adhesive, extracted from the DCB data, was shown to be relatively insensitive to temperature up to the glass transition temperature (T g ), while above T g (at 200°C) a great reduction took place. The output of the DCB numerical simulations for the various temperatures showed a good agreement with the experimental results, which validated the obtained data for strength prediction of bonded joints in tension. By the obtained results, the XFEM proved to be an alternative for the accurate strength prediction of bonded structures.

Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer

Adhesively-bonded joints are extensively used in several fields of engineering. Cohesive Zone Models (CZM) have been used for the strength prediction of adhesive joints, as an add-in to Finite Element (FE) analyses that allows simulation of damage growth, by consideration of energetic principles. A useful feature of CZM is that different shapes can be developed for the cohesive laws, depending on the nature of the material or interface to be simulated, allowing an accurate strength prediction. This work studies the influence of the CZM shape (triangular, exponential or trapezoidal) used to model a thin adhesive layer in single-lap adhesive joints, for an estimation of its influence on the strength prediction under different material conditions. By performing this study, guidelines are provided on the possibility to use a CZM shape that may not be the most suited for a particular adhesive, but that may be more straightforward to use/implement and have less convergence problems (e.g. triangular shaped CZM), thus attaining the solution faster. The overall results showed that joints bonded with ductile adhesives are highly influenced by the CZM shape, and that the trapezoidal shape fits best the experimental data. Moreover, the smaller is the overlap length (LO), the greater is the influence of the CZM shape. On the other hand, the influence of the CZM shape can be neglected when using brittle adhesives, without compromising too much the accuracy of the strength predictions.

Effect of plug-filling, Testing velocity and temperature on the tensile strength of strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug-filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. Whilst the main purpose of this work was to evaluate the feasibility of plug-filling for the strength improvement of these repairs, a parallel study was carried out to assess the sensitivity of the adhesive to external features that can affect the repairs performance, such as the rate of loading and environmental temperature. The experimental programme included repairs with different values of overlap length (L O = 10, 20 and 30 mm), and with and without plug-filling, whose results were interpreted in light of experimental evidence of the fracture modes and typical stress distributions for bonded repairs. The influence of the testing speed on the repairs strength was also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature (≈23°C), 50 and 80°C. This permitted a comparative evaluation of the adhesive tested below and above the glass transition temperature (T g), established by the manufacturer as 67°C. The combined influence of these two parameters on the repairs strength was also analysed. According to the results obtained from this work, design guidelines for repairing aluminium structures were

A straightforward method to obtain the cohesive laws of bonded joints under mode I loading

A simple procedure to measure the cohesive laws of bonded joints under mode I loading using the double cantilever beam test is proposed. The method only requires recording the applied load–displacement data and measuring the crack opening displacement at its tip in the course of the experimental test. The strain energy release rate is obtained by a procedure involving the Timoshenko beam theory, the specimen’s compliance and the crack equivalent concept. Following the proposed approach the influence of the fracture process zone is taken into account which is fundamental for an accurate estimation of the failure process details. The cohesive law is obtained by differentiation of the strain energy release rate as a function of the crack opening displacement. The model was validated numerically considering three representative cohesive laws. Numerical simulations using finite element analysis including cohesive zone modeling were performed. The good agreement between the inputted and resulting laws for all the cases considered validates the model. An experimental confirmation was also performed by comparing the numerical and experimental load–displacement curves. The numerical load–displacement curves were obtained by adjusting typical cohesive laws to the ones measured experimentally following the proposed approach and using finite element analysis including cohesive zone modeling. Once again, good agreement was obtained in the comparisons thus demonstrating the good performance of the proposed methodology.

Optimization study of hybrid spot-welded/bonded single-lap joints

Joining of components with structural adhesives is currently one of the most widespread techniques for advanced structures (e.g., aerospace or aeronautical). Adhesive bonding does not involve drilling operations and it distributes the load over a larger area than mechanical joints. However, peak stresses tend to develop near the overlap edges because of differential straining of the adherends and load asymmetry. As a result, premature failures can be expected, especially for brittle adhesives. Moreover, bonded joints are very sensitive to the surface treatment of the material, service temperature, humidity and ageing. To surpass these limitations, the combination of adhesive bonding with spot-welding is a choice to be considered, adding a few advantages like superior static strength and stiffness, higher peeling and fatigue strength and easier fabrication, as fixtures during the adhesive curing are not needed. The experimental and numerical study presented here evaluates hybrid spot-welded/bonded single-lap joints in comparison with the purely spot-welded and bonded equivalents. A parametric study on the overlap length (LO) allowed achieving different strength advantages, up to 58% compared to spot-welded joints and 24% over bonded joints. The Finite Element Method (FEM) and Cohesive Zone Models (CZM) for damage growth were also tested in Abaqus® to evaluate this technique for strength prediction, showing accurate estimations for all kinds of joints.

Shear strength of adhesively bonded polyolefins with minimal surface preparation

Interest in polyethylene and polypropylene bonding has increased in the last years. However, adhesive joints with adherends which are of low surface energy and which are chemically inert present several difficulties. Generally, their high degree of chemical resistance to solvents and dissimilar solubility parameters limit the usefulness of solvent bonding as a viable assembly technique. One successful approach to adhesive bonding of these materials involves proper selection of surface pre-treatment prior to bonding. With the correct pre-treatment it is possible to glue these materials with one or more of several adhesives required by the applications involved. A second approach is the use of adhesives without surface pre-treatment, such as hot melts, high tack pressure-sensitive adhesives, solvent-based specialty adhesives and, more recently, structural acrylic adhesives as such 3M DP-8005® and Loctite 3030®. In this paper, the shear strengths of two acrylic adhesives were evaluated using the lap shear test method ASTM D3163 and the block shear test method ASTM D4501. Two different industrial polyolefins (polyethylene and polypropylene) were used for adherends. However, the focus of this study was to measure the shear strength of polyethylene joints with acrylic adhesives. The effect of abrasion was also studied. Some test specimens were manually abraded using 180 and 320 grade abrasive paper. An additional goal of this work was to examine the effect of temperature and moisture on mechanical strength of adhesive joints.

Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures

The widespread employment of carbon-epoxy laminates in high responsibility and severely loaded applications introduces an issue regarding their handling after damage. Repair of these structures should be evaluated, instead of their disposal, for cost saving and ecological purposes. Under this perspective, the availability of efficient repair methods is essential to restore the strength of the structure. The development and validation of accurate predictive tools for the repairs behaviour are also extremely important, allowing the reduction of costs and time associated to extensive test programmes. Comparing with strap repairs, scarf repairs have the advantages of a higher efficiency and the absence of aerodynamic disturbance. This work reports on a numerical study of the tensile behaviour of three-dimensional scarf repairs in carbon-epoxy structures, using a ductile adhesive (Araldite® 2015). The finite elements analysis was performed in ABAQUS® and Cohesive Zone Modelling was used for the simulation of damage onset and growth in the adhesive layer. Trapezoidal cohesive laws in each pure mode were used to account for the ductility of the specific adhesive mentioned. A parametric study was performed on the repair width and scarf angle. The use of over-laminating plies covering the repaired region at the outer or both repair surfaces was also tested as an attempt to increase the repairs efficiency. The obtained results allowed the proposal of design principles for repairing composite structures.

Strength improvement of adhesively-bonded joints using a reverse-bent geometry

Adhesive bonding of components has become more efficient in recent years due to the developments in adhesive technology, which has resulted in higher peel and shear strengths, and also in allowable ductility up to failure. As a result, fastening and riveting methods are being progressively replaced by adhesive bonding, allowing a big step towards stronger and lighter unions. However, single-lap bonded joints still generate substantial peel and shear stress concentrations at the overlap edges that can be harmful to the structure, especially when using brittle adhesives that do not allow plasticization in these regions. In this work, a numerical and experimental study is performed to evaluate the feasibility of bending the adherends at the ends of the overlap for the strength improvement of single-lap aluminium joints bonded with a brittle and a ductile adhesive. Different combinations of joint eccentricity were tested, including absence of eccentricity, allowing the optimization of the joint. A Finite Element stress and failure analysis in ABAQUS® was also carried out to provide a better understanding of the bent configuration. Results showed a major advantage of using the proposed modification for the brittle adhesive, but the joints with the ductile adhesive were not much affected by the bending technique.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.

Effect of hole drilling at the overlap on the strength of single-lap joints

Bonded unions are gaining importance in many fields of manufacturing owing to a significant number of advantages to the traditional fastening, riveting, bolting and welding techniques. Between the available bonding configurations, the single-lap joint is the most commonly used and studied by the scientific community due to its simplicity, although it endures significant bending due to the non-collinear load path, which negatively affects its load bearing capabilities. The use of material or geometric changes in single-lap joints is widely documented in the literature to reduce this handicap, acting by reduction of peel and shear peak stresses at the damage initiation sites in structures or alterations of the failure mechanism emerging from local modifications. In this work, the effect of hole drilling at the overlap on the strength of single-lap joints was analyzed experimentally with two main purposes: (1) to check whether or not the anchorage effect of the adhesive within the holes is more preponderant than the stress concentrations near the holes, arising from the sharp edges, and modification of the joints straining behaviour (strength improvement or reduction, respectively) and (2) picturing a real scenario on which the components to be bonded are modified by some external factor (e.g. retrofitting of decaying/old-fashioned fastened unions). Tests were made with two adhesives (a brittle and a ductile one) varying the adherend thickness and the number, layout and diameter of the holes. Experimental testing showed that the joints strength never increases from the un-modified condition, showing a varying degree of weakening, depending on the selected adhesive and hole drilling configuration.

Single-lap joints of similar and dissimilar adherends bonded with an acrylic adhesive

In this study, the tensile strength of single-lap joints (SLJs) between similar and dissimilar adherends bonded with an acrylic adhesive was evaluated experimentally and numerically. The adherend materials included polyethylene (PE), polypropylene (PP), carbon-epoxy (CFRP), and glass-polyester (GFRP) composites. The following adherend combinations were tested: PE/PE, PE/PP, PE/CFRP, PE/GFRP, PP/PP, CFRP/CFRP, and GFRP/GFRP. One of the objectives of this work was to assess the influence of the adherends stiffness on the strength of the joints since it significantly affects the peel stresses magnitude in the adhesive layer. The experimental results were also used to validate a new mixed-mode cohesive damage model developed to simulate the adhesive layer. Thus, the experimental results were compared with numerical simulations performed in ABAQUS®, including a developed mixed-mode (I+II) cohesive damage model, based on the indirect use of fracture mechanics and implemented within interface finite elements. The cohesive laws present a trapezoidal shape with an increasing stress plateau, to reproduce the behaviour of the ductile adhesive used. A good agreement was found between the experimental and numerical results.

Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications

An experimental and numerical investigation into the shear strength behaviour of adhesive single lap joints (SLJs) was carried out in order to understand the effect of temperature on the joint strength. The adherend material used for the experimental tests was an aluminium alloy in the form of thin sheets, and the adhesive used was a high-strength high temperature epoxy. Tensile tests as a function of temperature were performed and numerical predictions based on the use of a bilinear cohesive damage model were obtained. It is shown that at temperatures below Tg, the lap shear strength of SLJs increased, while at temperatures above Tg, a drastic drop in the lap shear strength was observed. Comparison between the experimental and numerical maximum loads representing the strength of the joints shows a reasonably good agreement.

Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method

Adhesive bonding is nowadays a serious candidate to replace methods such as fastening or riveting, because of attractive mechanical properties. As a result, adhesives are being increasingly used in industries such as the automotive, aerospace and construction. Thus, it is highly important to predict the strength of bonded joints to assess the feasibility of joining during the fabrication process of components (e.g. due to complex geometries) or for repairing purposes. This work studies the tensile behaviour of adhesive joints between aluminium adherends considering different values of adherend thickness (h) and the double-cantilever beam (DCB) test. The experimental work consists of the definition of the tensile fracture toughness (GIC) for the different joint configurations. A conventional fracture characterization method was used, together with a J-integral approach, that take into account the plasticity effects occurring in the adhesive layer. An optical measurement method is used for the evaluation of crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab® sub-routine for the automated extraction of these quantities. As output of this work, a comparative evaluation between bonded systems with different values of adherend thickness is carried out and complete fracture data is provided in tension for the subsequent strength prediction of joints with identical conditions.

Elucidating the role of glycans in leucocyte function

RESUMO:O processo de glicosilação é a modificação pós-traducional de proteínas mais comum e está envolvido em vários processos fisiológicos e patológicos. Especificamente, certos perfis glicosídeos estão correlacionados a estados específicos de diferenciação celular, e podem modular vários eventos celulares, como sinalização celular, migração celular e interações hospedeiro-patogénio. Assim sendo, a glicosilação desempenha um papel crucial na modulação de vários processos imunológicos. No entanto, permanece por esclarecer como as estruturas glicosídicas influenciam a imunidade. Especificamente, algumas estruturas glicosídicas terminais que estão modificadas pela ligação de ácido siálico desempenham um papel importante em várias funções do sistema imune, nomeadamente migração leucocitária em contexto de inflamação e ativação de células imunes. Como tal, este trabalho teve como objectivo investigar como a expressão de certos glicanos influencia componentes importantes da resposta imune inata e adaptativa. Este trabalho está dividido em três componentes principais: 1) A imunidade está amplamente dependente da habilidade das células circulantes migrarem para os tecidos inflamados, sendo que a ligação de leucócitos à Eselectina endotelial é o primeiro passo. Assim, nós analisámos a estrutura e função dos ligandos de E-selectina que são expressos pelas células humanas mononucleares de sangue periférico (PBMCs), fornecendo novos conhecimentos para a compreensão dos intervenientes moleculares que mediam a ligação dos monócitos, células CD4+ e CD8+T e células B ao endotélio vascular. Surpreendentemente, os monócitos apresentaram maior capacidade de ligação à E-selectina comparativamente aos linfócitos. Esta observação pode ser explicada pelo facto de os monócitos humanos expressarem, uniformemente, um vasto reportório de glicoproteínas que exibem afinidade de ligação à E-selectina, nomeadamente: as glicoformas do CD43 (CD43E) e do CD44 (HCELL), em adição à já previamente reportada glicoforma da PSGL-1 (CLA). Consistentemente, a diferente capacidade que as diversas populações linfocitárias apresentam de se ligar à E-selectina, está integralmente relacionada com a sua expressão de glicoproteínas com afinidade de ligação à E-selectina. Enquanto que as células CD4+T apresentam uma elevada reatividade à E-selectina, as células CD8+T e B demonstram pouca ou nenhuma capacidade de ligação à E-selectina. Esta atividade de ligação à E-selectina das células CD4+T é conferida pela expressão de HCELL, em adição às já previamente reportadas CLA e CD43E. As células CD8+ T não expressam HCELL e apenas expressam pequenas quantidades de CLA e CD43E, enquanto que as células B não expressam ligandos de Eselectina. Mais, a exofucosilação da superfície destas células, levou ao dramático aumento da expressão dos ligandos de E-selectina em todos as populações leucocitárias, verificando-se que a criação de certos ligandos de E-selectina está dependente do tipo de célula, após fucosilação. Colectivamente, estes resultados redefinem o nosso conhecimento acerca dos mecanismos moleculares que governam o tráfico das células mononucleares de sangue periférico em contexto de inflamação. 2) A habilidade das células dendríticas (DCs) para extravasarem em locais de inflamação é crucial para o sucesso da terapia com DCs. Assim, analisámos a estrutura e função das moléculas de adesão que mediam a migração transendotelial (TEM) das DCs. Para isso, foram usadas DCs geradas a partir da diferenciação de monócitos (mo-DCS), obtidos quer pelo métodos de separação imuno-magnética de células CD14+ (CD14-S) ou por isolamento por aderência ao plástico (PA-S). Os resultados obtidos indicam que as glicoformas de ligação à Eselectina de PSGL-1, CD43 e CD44 são expressas pelas CD14-S mo-DCs, enquanto que as PA-S mo-DCs expressam apenas CLA. É importante notar que a ligação do CD44 nas mo-DCs, mas não nas PA-S mo-DCs, desencadeia a ativação e consequente adesão da VLA-4 ao endotélio na ausência de um gradiente de quimiocinas. Procedeu-se também à análise dos ligandos E-selectina expressos em mo-DCs geradas a partir de monócitos do sangue do cordão umbilical (UCB) e, inesperadamente, as UCB mo-DCs não expressam qualquer glicoproteína com reatividade à E-selectina. Além disso, a exofucosilação das mo- DCs humanas utilizando uma α(1,3)-fucosiltransferase aumenta significativamente a expressão de HCELL e, portanto, estas células apresentam uma capacidade aumentada para se ligarem à E-selectina em condições de fluxo hemodinâmico. Estes resultados destacam o papel do HCELL no desencadeamento do TEM das CD14-S mo-DCs e sugerem que estratégias para potenciar a expressão de HCELL poderão impulsionar o recrutamento de mo-DCs para locais de inflamação. 3) Outro obstáculo para alcançar o sucesso promissor de vacinas baseadas em DCs é o estabelecimento de abordagens eficientes que poderão melhorar o estado de maturação e apresentação antigénica das DCs. Por conseguinte, foram investigadas abordagens alternativas que podem superar este obstáculo. Através da remoção de ácido siálico de superfície celular das DCs, conseguiu-se induzir a maturação de DC humanas e de ratinhos. Notavelmente, tanto as DCs humanas como as de ratinho, ao serem desialiladas mostraram uma capacidade aumentada para induzir a proliferação de células T, para secretar citocinas Th1 e para induzir a morte específica de células tumorais. Em adição, as DCs desialiladas apresentam uma maior capacidade de apresentação cruzada de antigénios tumorais às células T citotóxicas. Colectivamente, o presente estudo oferece uma visão chave para optimizar a capacidade das DCs em induzir respostas imunitárias anti-tumorais, e indica que o tratamento com sialidase é uma nova tecnologia para melhorar a eficácia e aplicabilidade das vacinas baseadas em DCs. Coletivamente, os nossos resultados demostram como a glicosilação e a sua manipulação podem modular a imunidade. Concretamente, através de uma reação de exofucosilação conseguimos aumentar fortemente a capacidade de os leucócitos extravasarem para os tecidos afectados, enquanto que a remoção dos níveis de ácido siálico da superfície celular das DCs, induz potentes respostas anti-tumorais mediadas por células T citotóxicas. ---------------------------- ABSTRACT: Glycosylation is the most widely form of protein post-translational modification and is involved in many physiological and pathological processes. Specifically, certain patterns of glycosylation are associated with determined stages of cell differentiation and can modulate processes like cell-signaling and migration and host-pathogen interactions. As such, glycosylation plays a crucial role in the modulation of several immune events. However, how glycans execute this immune-modulation and, therefore, influence immunity is still poorly unknown. Specifically, some terminal sialic acid-modified determinants are known to be involved in several physiological immune processes, including leukocyte trafficking into sites of inflammation and cell immune activation. Therefore, in this work, we sought to investigate more deeply how the expression of these glycosidic structures affects events form both innate and adaptive immune responses. To this end, we divided our work into three main parts: 1) Immunity critically depends on the ability of sentinel circulating cells to infiltrate injured sites, of which leukocyte binding to endothelial E-selectin is the critical first step. Thus, we first analyzed the structure and function of the E-selectin ligands expressed on native human peripheral blood mononuclear cells (PBMCs), providing novel insights into the molecular effectors governing adhesion of circulating monocytes, and of circulating CD4+T, CD8+T and B cells, to vascular endothelium under hemodynamic shear conditions. Strikingly, monocytes show a higher ability to tether and roll on endothelial cells than lymphocyte subsets. This is due to the fact that human circulating monocytes uniformly display a wide repertoire of E-selectin binding glycoproteins, namely the E-selectin-binding glycoforms of CD43 (CD43E) and CD44 (HCELL), in addition to the previously described E-selectin-binding glycoform of PSGL-1 (CLA). In addition, we also observed a differential ability of the different lymphocyte subsets to bind to Eselectin under hemodynamic shear stress conditions, and these differences were highly correlated with their individual expression of E-selectin binding glycoproteins. While CD4+T cells show a robust E-selectin binding ability, CD8+T and B cells show little to no E-selectin reactivity. CD4+T cell potent Eselectin rolling activity is conferred by HCELL expression, in addition to the previously reported E-selectin-binding glycoproteins CD43E and CLA. CD8+T cells display no HCELL and low amounts of CLA and CD43E, whereas B cells lack E-selectin ligand expression. Moreover, enforced exofucosylation of cell surface of these cells noticeably increases expression of functional E-selectin ligands among all leukocytes subsets, with cell type-dependent specificity in the protein scaffolds that are modified. Taken together, these findings redefine our understanding of the molecular mechanisms governing the trafficking patterns of PBMCs that are relevant in the context of acute or chronic inflammatory conditions. 2) The ability of circulating dendritic cells (DCs) to extravasate at inflammatory sites is critical to the success of DC-based therapies. Therefore, we assessed the structure and function of adhesion molecules mediating the transendothelial migration (TEM) of human monocyte derived-DCs (mo-DCs), obtained either by CD14 positive immune-magnetic selection (CD14-S) or by plastic adherence of blood monocytes (PA-S). We report for the first time that the E-selectin binding glycoforms of PSGL-1, CD43 and CD44 are all expressed on CD14-S mo-DCs, in contrast to PA-S mo-DCs that express only CLA. Importantly, CD44 engagement on CD14-S mo-DCs, but not on PA-S mo-DCs, triggers VLA-4-dependent adhesiveness and programs TEM in absence of chemokine gradient. We also analyzed the E-selectin ligands expressed on mo-DCs generated from umbilical cord blood (UCB) monocytes, and unexpectedly, UCB mo-DCs do not express any glycoprotein with E-selectin reactivity. Furthermore, exoglycosylation of human mo-DCs using an α(1,3)-fucosyltransferase significantly increases expression of HCELL, and therefore exofucosylated mo-DCs exhibit an augmented ability to bind to E-selectin under hemodynamic shear stress conditions. These findings highlight a role for HCELL engagement in priming TEM of CD14-S mo-DCs, and suggest that strategies to enforce HCELL expression could boost mo-DC recruitment to inflammatory sites.3) Another obstacle to achieve the promising success of DC-based vaccines is the establishment of efficient approaches that could successfully enhance maturation and cross-presentation ability of DCs. Therefore, we investigated an alternative approach that can overcome this problem. Through removal of sialic acid content from DC cell surface we are able to elicit maturation of both human and mouse DCs. Notably, desialylated human and murine DCs showed enhanced ability to induce autologous T cell to proliferate, to secrete Th1 cytokines and to kill tumor cells. Moreover, desialylated DCs display enhanced cross-presentation of tumor antigens to cytotoxic CD8+ T cells. Collectively, this study offers key insight to optimize the ability of DCs to boost anti-tumor immune responses, and indicates that the treatment with an exogenous sialidase is a powerful new technology to improve the efficacy and applicability of DC-based vaccines. Overall, our findings show how glycosylation and its manipulation can modulate immunity. Concretely, through an exofucosylation reaction we are able to greatly augment the ability of leukocytes to extravasate into injured tissues, while removal of sialic acid moieties from cell surface of DCs, significantly potentiate their ability to induce anti-tumor cytotoxic T cell-mediate responses.

BA'S : The practice and law of bankers' acceptance

Au cours d'une transaction portant sur une acceptation bancaire (ci-après «BA» tel que dénommée dans le jargon juridique) différents types de relations peuvent s'établir entre les parties impliquées, certaines plus directes que d'autres. Dans une transaction donnée, à part le client et la banque, on peut trouver une ou plusieurs banques participantes et un ou plusieurs investisseurs, qui deviennent détenteurs de BA. La situation peut devenir complexe et les relations légales risquent de devenir assez compliquées. Cependant, il est important d'identifier si la relation s'est établie à travers l'instrument de BA, si elle existe par le biais d'une relation contractuelle ordinaire ou encore, si elle existe par le fait de la loi. Une bonne analyse des circonstances entourant la transaction, des facteurs connexes à la transaction et des droits et obligations qui existent entre les parties, sera nécessaire pour déterminer laquelle de la loi provinciale ou fédérale s'appliquera, et dans quelle mesure. Une fois accordée, la BA est gouvernée par la Loi sur les lettres de change. Toutes solutions apportées à un problème qui implique des BA, doivent, en principe, respecter la nature inhérente de la BA en tant qu'effet de commerce, gouverné par la loi fédérale. En matière de BA, c'est, soit la Loi sur les lettres de change soit la Loi sur les lettres et billets de dépôt (Depository Bills and Note Act) qui s'appliqueront à l'acte. Comme il existe des lois fédérales applicables à la BA, l'objet de notre étude est de déterminer si, et dans quelle circonstance la loi de la province, tel que le Code civil du Québec, trouvera application et éclaircira dans certains cas la disposition contenue dans la Loi sur les lettres de change, notamment lorsque les dispositions de ladite loi sont silencieuses ou ambigües. La solution la plus simple serait d'appliquer la loi provinciale aux matières qui ne sont pas traitées dans la loi, étant donné que les lois provinciales apportent souvent un complément à la législation fédérale. Cependant, la Loi sur les lettres de change contient des dispositions spéciales, tel que l'article 9 qui stipule : « 9. Les règles de la common law d'Angleterre, y compris en droit commercial, s'appliquent aux lettres, billets et chèques dans la mesure de leur compatibilité avec les dispositions expresses de la présente loi. » Cette disposition a crée une certaine confusion relativement à l'application du droit civil du Québec en matière de Lettres de change. En effet, il existe un doute quant à savoir si l'application de l'article 9 est une incorporation par référence qui exclue totalement l'application du droit civil. Cette question continue de se poser inexorablement dans la doctrine et la jurisprudence. Elle a en effet donné lieu à une série de théories quand au degré d'application de la common law en matière de lettres de change. Une revue de la jurisprudence dominante nous permet de conclure que les tribunaux ont accepté l'application du droit provinciale dans certaines questions impliquant les lettres de change. La question essentielle traitée lors de notre analyse est la suivante: lorsqu'un litige prend naissance dans une transaction de BA, quelle est la règle qui devra s'appliquer? Quel sera le droit qui gouvernera les problèmes émergeant dans une BA, celui du Code Civil du Québec ou celui de la common law d'Angleterre? Étant donne le nombre de cas qui sont portés devant les cours de justice en rapport avec des transactions de BA, comprendre quelle sera la loi applicable est d'une importance fondamentale. Pour répondre à cette question, nous commencerons par un examen de l'historique, du développement et de l'évolution de la BA. Afin de mieux comprendre la BA, nous débuterons par un bref survol des origines de cet instrument juridique. Dans le deuxième chapitre, nous analyserons la nature et le caractère légal de la BA. Cela constituera le cadre aux travers duquel nous pourrons identifier les règles et les principes qui s'appliquent aux différents aspects de la transaction de BA. Le chapitre trois fera l'objet d'un examen détaillé des mécanismes de l'opération de BA tout en étudiant de près les exigences imposées par la législation applicable. Après avoir examine l'aspect légal de la BA, nous procéderons au chapitre quatre, à l'étude de l'applicabilité de la loi provinciale relativement à certains aspects de la transaction de BA. A cet effet, nous examinerons les différentes approches de compréhension de la Loi sur les lettres de change et plus particulièrement la problématique rencontrée à l'article 9. Nous étudierons aussi l'application et l'interprétation de cette loi par les tribunaux du Québec au cours du siècle dernier. Les juges et les juristes se sont penchés sur les sens qu'a voulu donner le législateur lorsqu'il a stipulé dans l'article 9 «Le règles de la common law d'Angleterre, y compris en droit commercial, s appliquent aux lettres, billets et chèques dans la mesure de leur compatibilité avec les dispositions expresses de la présente loi ». Cette section doit-elle être appliquée à la lettre, nous obligeant à appliquer la common law d'Angleterre a chaque problème qui peut se poser en relation avec les lettres et les billets? Le Parlement a-t-il l'intention que cette disposition s'applique également au Québec, dont le droit privé est basé sur le système du Code Civil? Notre étude portera sur les différentes approches d'interprétation qui offrent une diversité de solutions au problème posé par l'article 9. Finalement, compte tenu des nouveaux développements législatifs, au chapitre cinq, nous proposons une méthode en vue de déterminer la loi applicable aux différents aspects de la transaction de BA. Notre analyse nous a conduit à adopter la solution proposée par la majorité des juristes, à la différence que notre approche de l'article 9 est basée sur des raisons de politique. Nous avons donc adopté la stricte dichotomie (en tant qu'effet négociable d'une part, et d'une sorte de contrat et de propriété de l'autre) en prenant en compte les difficultés inhérentes à déterminer quand l'un finit et l'autre commence. En conclusion, selon notre opinion, il existe deux solutions. Premièrement, il y a la possibilité que l'article 9 puisse être écarté. Dans ce cas, toutes les matières qui ne sont pas expressément évoquées dans la loi tomberont dans la compétence de la loi provinciale, comme c'est le cas dans d'autres types de législations fédérales. Dans ces situations, le droit civil du Québec joue un rôle supplétif dans les applications d'une loi fédérale au Québec. Deuxièmement, modifier l'article 9 plutôt que d'en écarter son application offre une autre possibilité. Incorporer la large stricte dichotomie dans l'article 9 nous semble être une solution préférable. La disposition pourrait se lire comme suit: « Les règles de la common law d'Angleterre incluant le droit commercial dans la mesure ou elles ne sont pas incompatibles avec les dispositions expresses de la Loi, s’appliquent aux lettres, billets, et chèques au sens stricte. Pour plus de certitude, les lettres et les billets au sens strict, incluent la forme, la délivrance et I’émission des lettres, billets, et chèques.» Ce type de changement se révélera être un pas important dans le but de clarifier la loi et déterminer l'équilibre à trouver entre l'application des lois fédérales et provinciales en matière de BA.