A new DTL-electrode holder for recording of electroretinograms in animals

Purpose: Contact lens electrodes (CLEs) are frequently used to register electroretinograms (ERGs) in small animals such as mice or rats. CLEs are expensive to buy or difficult to be produced individually. In addition, CLE`s have been noticed to elicit inconstant results and they carry potential to injure the cornea. Therefore, a new electrode holder was constructed based on the clinically used DTL-electrode and compared to CLEs. Material and methods: ERGs were recorded with both electrode types in nine healthy Brown-Norway rats under scotopic conditions. For low intensity responses a Naka-Rushton function was fitted and the parameters V(max), k and n were analyzed. The a-wave, b-wave and oscillatory potentials were analyzed for brighter flash intensities (1-60 scot cd s/m(2)). Repeatability was assessed for both electrode types in consecutive measurements. Results: The new electrode holder was faster in setting up than the CLE and showed lower standard deviations. No corneal alterations were observed. Slightly higher amplitudes were recorded in most of the measurements with the new electrode holder (except amplitudes induced by 60 cd s/m(2)). A Bland-Altman test showed good agreement between the DTL holder and the CLE (mean difference 35.2 mu V (Holder-CLE)). Pearson`s correlation coefficient for test-retest-reliability was r = 0.783. Conclusions: The DTL holder was superior in handling and caused far less corneal problems than the CLE and produced comparable or better electrophysiological results. The minimal production costs and the possibility of adapting the DTL holder to bigger eyes, such as for dogs or rabbits, offers with broader application prospects. (C) 2010 Elsevier B.V. All rights reserved.

The impact of perinatal and socioeconomic factors on mental health problems of children from a poor Brazilian city: a longitudinal study

Low birth weight and preterm birth, and social disadvantage may negatively affect mental health of children, but findings have been inconsistent. To assess the influence of perinatal and social factors on mental health problems in children aged 7-9 years. A random sample of 805 births in So Luis, Brazil was studied in 1997/1998 and again in 2005/2006. Perinatal, socioeconomic and demographic variables were assessed within 24 h after delivery. The Strengths and Difficulties Questionnaire (SDQ) was used to assess mental health problems in the children. Simple and multiple Poisson regressions were used for statistical analysis. The overall prevalence of mental health problems in the total sample was 47.7%. The prevalences of emotional and conduct problems were 58.2 and 48.8%, respectively. Only paternal age (< 20 years) was associated with mental health problems as measured by the full SDQ scale (prevalence ratio PR = 1.27). Children born to single mothers (PR = 1.31) and those with birth weight from 1,500 to 2,499 g (PR = 1.18) and from 2,500 to 2,999 g (PR = 1.17) had a higher risk of emotional problems, but those from low income families had a lower risk (PR = 0.80). Children with a father of less than 20 years had a higher risk of having problems with their peers (PR = 1.75). A maternal education of 9 years or over was inversely associated with peer (PR = 0.70) and conduct problems (PR = 0.73). Girls had a lower risk of conduct (PR = 0.77) and hyperactivity problems (PR = 0.68). A maternal education of 4 years or less increased the risk of hyperactivity (PR = 1.48). Socioeconomic and demographic conditions were better predictors of mental health problems in children than birth weight or preterm birth. However, since most effect sizes were small most mental health problems were, unexplained by the variables in the study.

Will Bangladesh's economic growth solve its environmental problems?

Bangladesh has experienced rising GDP and rising per capita incomes now for at least three decades. This article considers whether its continuing economic growth is likely to solve its environmental problems. In doing so, it critically considers the application to Bangladesh of Environmental Kuznets Curve relationships and applies other macro-methods of assessing the relationship between economic growth and the environment to Bangladesh’s situation. The consequences of Bangladesh's economic reforms for the economic welfare of Bangladeshis and the state of Bangladesh's environment are also examined. Particular attention is given to environmental change in agriculture in the light of Bangladesh economic growth, reforms and proposed growth strategy. Doubts are expressed about the environmental benefits claimed by the Bangladeshi Government for its agricultural development strategy. Indeed, it may exacerbate many existing environmental problems, such as depletion of soil fertility and water supplies, already present.

Influence of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and bond strength

Statement of the Problem: Adhesive systems can spread differently onto a substrate and, consequently, influence bonding. Purpose: The purpose of this study was to evaluate the effect of differently oriented dentin surfaces and the regional variation of specimens on adhesive layer thickness and microtensile bond strength (MTBS). Materials and Methods: Twenty-four molars were sectioned mesiodistally to expose flat buccal and lingual halves. Standardized drop volumes of adhesive systems (Single Bond [SB] and Prime & Bond 2.1 [PB2.1]) were applied to dentin according to the manufacturer`s instructions. Teeth halves were randomly divided into groups: 1A-SB/parallel to gravity; 1B-SB/perpendicular to gravity; 2A-PB2.1/parallel to gravity; and 2B-PB2.1/perpendicular to gravity. The bonded assemblies were stored in 37 degrees C distilled water for 24 hours and then sectioned to obtain dentin sticks (0.8 mm(2)). The adhesive layer thickness was determined in a light microscope (x200), and after 48 hours the specimens were subjected to MTBS test. Data were analyzed by one-way and two-way analysis of variance and Student-Newman-Keuls tests. Results: Mean values (MPa +/- SD) of MTBS were: 39.1 +/- 12.9 (1A); 32.9 +/- 12.4 (1B); 52.9 +/- 15.2 (2A); and 52.3 +/- 16.5 (2B). The adhesive systems` thicknesses (mu m +/- SD) were: 11.2 +/- 2.9 (1A); 18.1 +/- 7.3 (1B); 4.2 +/- 1.8 (2A); and 3.9 +/- 1.3 (2B). No correlation between bond strength and adhesive layer thickness for both SB and PB2.1 (r = -0.224, p = 0.112 and r = 0.099, p = 0.491, respectively) was observed. Conclusions: The differently oriented dentin surfaces and the regional variation of specimens on the adhesive layer thickness are material-dependent. These variables do not influence the adhesive systems` bond strength to dentin. CLINICAL SIGNIFICANCE Adhesive systems have different viscosities and spread differently onto a substrate, influencing the bond strength and also the adhesive layer thickness. Adhesive thickness does not influence dentin bond strength, but it may impair adequate solvent evaporation, polymer conversion, and may also determine water sorption and adhesive degradation over time. In the literature, many studies have shown that the adhesive layer is a permeable membrane and can fail over timebecause ofits continuous plasticizing and degradation when in contact with water. Therefore, avoiding thick adhesive layers may minimize these problems and provide long-term success for adhesive restorations.

Three-point boundary value problems for second-order, ordinary, differential equations

We establish existence results for solutions to three-point boundary value problems for nonlinear, second-order, ordinary differential equations with nonlinear boundary conditions. (C) 2001 Elsevier Science Ltd. All rights reserved.

Topological methods for some boundary value problems

We establish existence of solutions for a finite difference approximation to y = f(x, y, y ') on [0, 1], subject to nonlinear two-point Sturm-Liouville boundary conditions of the form g(i)(y(i),y ' (i)) = 0, i = 0, 1, assuming S satisfies one-sided growth bounds with respect to y '. (C) 2001 Elsevier Science Ltd. All rights reserved.

Integrating the tourism industry: problems and strategies

This paper addresses two interrelated issues in tourism development: horizontal integration within tourism's component sectors and attempts at vertical integration between them. The paper employs a conceptual framework adapted from regulation theory, to assess the dynamics of these processes, particularly in relation to airlines and hotels. Through examining some of the most important examples of both horizontal and vertical integration, it indicates how these have influenced contemporary strategies in the component sectors. The paper goes on to illustrate how trends towards Fordist organization within airlines have conflicted with post-Fordist trends in hotel operations, to undermine attempts at vertical integration across the tourism industry. (C) 2000 Elsevier Science Ltd. All rights reserved.

Analysis of flexural waves excited by rectangular contact type transducers

In this paper, an attempt was made to investigate a fundamental problem related to the flexural waves excited by rectangular transducers. Due to the disadvantages of the Green's function approach for solving this problem, a direct and effective method is proposed using a multiple integral transform method and contour integration technique. The explicit frequency domain solutions obtained from this newly developed method are convenient for understanding transducer behavior and theoretical optimization and experimental calibration of rectangular transducers. The time domain solutions can then be easily obtained by using the fast Fourier transform technique. (C) 2001 Elsevier Science B.V. All rights reserved.

Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates

The acousto-ultrasonic (AU) input-output characteristics for contact-type transmitting and receiving transducers coupled to composite laminated plates are considered in this paper. Combining a multiple integral transform method, an ordinary discrete layer theory for the laminates and some simplifying assumptions for the electro-mechanical transduction behaviour of the transducers, an analytical solution is developed which can deal with all the wave processes involved in the AU measurement system, i.e, wave generation, wave propagation and wave reception. The spectral response of the normal contact pressure sensed by the receiving transducer due to an arbitrary input pulse excited by the transmitting transducer is obtained. To validate the new analytical-numerical spectral technique in the low-frequency regime, the results are compared with Mindlin plate theory solutions. Based on the analytical results, numerical calculations are carried out to investigate the influence of various external parameters such as frequency content of the input pulse, transmitter/receiver spacing and transducer aperture on the output of the measurement system. The results show that the presented analytical-numerical procedure is an effective tool for understanding the input-output characteristics of the AU technique for laminated plates. (C) 2001 Elsevier Science Ltd. All rights reserved.