Introduction [to Biology of the Acanthocephala]

Introduction to Biology of the Acanthocephala, edited by D.W.T. Crompton and Brent B. Nickol; Cambridge University Press, 1985.

I. Development of the In Situ Reductive Ozonolysis of Alkenes with Tertiary Amine N-Oxides. II. Progress toward the Asymmetric Synthesis of Peroxyplakoric Acid A3.

Ozone, first discovered in the mid 1800’s, is a triatomic allotrope of oxygen that is a powerful oxidant. For over a century, research has been conducted into the synthetic application and mechanism of reactions of ozone with organic compounds. One of the major areas of interest has been the ozonolysis of alkenes. The production of carbonyl compounds is the most common synthetic application of ozonolysis. The generally accepted mechanism developed by Rudolf Criegee for this reaction involves the 1,3-electrocyclic addition of ozone to the π bond of the alkene to form a 1,2,3-trioxolane or primary ozonide. The primary ozonide is unstable at temperatures above -100 °C and undergoes cycloreversion to produce the carbonyl oxide and carbonyl intermediates. These intermediates then recombine in another 1,3-electrocyclic addition step to form the 1,2,4-trioxolane or final ozonide. While the final ozonide is often isolable, most synthetic applications of ozonolysis require a subsequent reductive or oxidative step to form the desired carbonyl compound. During investigations into the nucleophilic trapping of the reactive carbonyl oxide, it was discovered that when amines were used as additives, an increased amount of reaction time was required in order to consume all of the starting material. Surprisingly, significant amounts of aldehydes and a suppression of ozonide formation also occurred which led to the discovery that amine N-oxides formed by the ozonation of the amine additives in the reaction were intercepting the carbonyl oxide. From the observed production of aldehydes, our proposed mechanism for the in situ reductive ozonolysis reaction with amine N-oxides involves the nucleophilic trapping of the carbonyl oxide intermediate to produce a zwitterionic adduct that fragments into 1O2, amine and the carbonyl thereby avoiding the formation of peroxidic intermediates. With the successful total syntheses of peroxyacarnoates A and D by Dr. Chunping Xu, the asymmetric total synthesis of peroxyplakorate A3 was investigated. The peroxyplakoric acids are cyclic peroxide natural products isolated from the Plakortis species of marine sponge that have been found to exhibit activity against malaria, cancer and fungi. Even though the peroxyplakorates differ from the peroxyacarnoates in the polyunsaturated tail and the head group, the lessons learned from the syntheses of the peroxyacarnoates have proven to be valuable in the asymmetric synthesis of peroxyplakorate A3. The challenges for the asymmetric synthesis of peroxyplakorate A3 include the stereospecific formation of the 3-methoxy-1,2-dioxane core with a propionate head group and the introduction of oxidation sensitive dienyl tail in the presence of a reduction sensitive 1,2-dioxane core. It was found that the stereochemistry of two of the chiral centers could be controlled by an anti-aldol reaction of a chiral propionate followed by the stereospecific intramolecular cyclization of a hydroperoxyacetal. The regioselective ozonolysis of a 1,2-disubstituted alkene in the presence of a terminal alkyne forms the required hydroperoxyacetal as a mixture of diastereomers. Finally, the dienyl tail is introduced by a hydrometallation/iodination of the alkyne to produce a vinyl iodide followed by a palladium catalyzed coupling reaction. While the coupling reaction was unsuccessful in these attempts, it is still believed that the intramolecular cyclization to introduce the 1,2-dioxane core could prove to be a general solution to many other cyclic peroxides natural products.

The impact of R&D in firm value across Europe

In this thesis the impact of R&D expenditures on firm market value and stock returns is examined. This is performed in a sample of European listed firms for the period 2000-2009. I apply different linear and GMM econometric estimations for testing the impact of R&D on market prices and construct country portfolios based on firms’ R&D expenditure to market capitalization ratio for studying the effect of R&D on stock returns. The results confirm that more innovative firms have a better market valuation,investors consider R&D as an asset that produces long-term benefits for corporations. The impact of R&D on firm value differs across countries. It is significantly modulated by the financial and legal environment where firms operate. Other firm and industry characteristics seem to play a determinant role when investors value R&D. First, only larger firms with lower financial leverage that operate in highly innovative sectors decide to disclose their R&D investment. Second, the markets assign a premium to small firms, which operate in hi-tech sectors compared to larger enterprises for low-tech industries. On the other hand, I provide empirical evidence indicating that generally highly R&D-intensive firms may enhance mispricing problems related to firm valuation. As R&D contributes to the estimation of future stock returns, portfolios that comprise high R&D-intensive stocks may earn significant excess returns compared to the less innovative after controlling for size and book-to-market risk. Further, the most innovative firms are generally more risky in terms of stock volatility but not systematically more risky than low-tech firms. Firms that operate in Continental Europe suffer more mispricing compared to Anglo-Saxon peers but the former are less volatile, other things being equal. The sectors where firms operate are determinant even for the impact of R&D on stock returns; this effect is much stronger in hi-tech industries.

Effect of oral D-tagatose on liver volume and hepatic glycogen accumulation in healthy male volunteers

Standard toxicity tests with high levels of D-tagatose showed a reversible enlargement of the liver in Sprague-Dawley rats without increase of liver enzymes. The present study tests the hypotheses that partial substitution of dietary sucrose by D-tagatose for 28 days increases the volume of human liver and the concentration of liver glycogen. Twelve healthy, male volunteers were studied in a double-blind crossover study with ingestion of D-tagatose (3x15 g daily) and placebo (sucrose, 3x15 g daily) for periods of 28 days each. Liver volume and glycogen concentration have been determined by magnetic resonance (MR) imaging and spectroscopy, which were accompanied by routine medical examinations. MR examinations before and after the treatments revealed no effects (P>0.05) of treatment, period, or subject for changes in liver volume or glycogen concentration. A steady increase of liver volumes, independent of the D-tagatose or placebo intake, has been observed over the study in parallel with a slight increase in body weight. The treatment with D-tagatose was not associated with clinically relevant changes of the examined clinico-chemical and hematological parameters, including liver enzymes and uric acid.

Model to describe the mode I fracture of steel fiber reinforced ultra-high performance concrete

Ultra-high performance fiber reinforced concrete (UHPFRC) has arisen from the implementation of a variety of concrete engineering and materials science concepts developed over the last century. This material offers superior strength, serviceability, and durability over its conventional counterparts. One of the most important differences for UHPFRC over other concrete materials is its ability to resist fracture through the use of randomly dispersed discontinuous fibers and improvements to the fiber-matrix bond. Of particular interest is the materials ability to achieve higher loads after first crack, as well as its high fracture toughness. In this research, a study of the fracture behavior of UHPFRC with steel fibers was conducted to look at the effect of several parameters related to the fracture behavior and to develop a fracture model based on a non-linear curve fit of the data. To determine this, a series of three-point bending tests were performed on various single edge notched prisms (SENPs). Compression tests were also performed for quality assurance. Testing was conducted on specimens of different cross-sections, span/depth (S/D) ratios, curing regimes, ages, and fiber contents. By comparing the results from prisms of different sizes this study examines the weakening mechanism due to the size effect. Furthermore, by employing the concept of fracture energy it was possible to obtain a comparison of the fracture toughness and ductility. The model was determined based on a fit to P-w fracture curves, which was cross referenced for comparability to the results. Once obtained the model was then compared to the models proposed by the AFGC in the 2003 and to the ACI 544 model for conventional fiber reinforced concretes.

STUDIES ON THE CLASS I GLYCOPROTEINS OF THE MURINE MAJOR HISTOCOMPATIBILITY COMPLEX (TRANSPLANTATION ANTIGEN, LYMPHOCYTE, CELL SURFACE MOLECULE)

A series of studies were undertaken to analyze and compare various aspects of murine class I glycoproteins. An initial area of investigation characterized the Qa-1 alloantigens using two-dimensional gel electrophoresis. Analysis of the products of the Qa-1('b), Qa-1('c) and Qa-1('d) alleles indicated that these were distinct molecules as determined by their lack of comigration upon comparative two-dimensional gel analysis. The importance of asparagine-linked glycosylation in the cell surface expression of class I molecules was also examined. These studies employed tunicamycin, an inhibitor of N-linked glycosylation. Tunicamycin treatment of activated T lymphocytes diminished the surface expression of Qa-1 to undetectable levels; the levels of other class I molecules exhibited little or no decrease. These results indicated that N-linked glycosylation has a differential importance in the cell surface expression of various class I molecules. The molecular weight diversity of class I molecules was also investigated. Molecular weight determination of both the fully glycosylated and unglycosylated forms of H-2 and Qa/Tla region encoded molecules established that there is a significant variation in the sizes of these forms of various class I molecules. The most significant difference ((TURN)9,000 daltons) exists between the unglycosylated forms of H-2K('b) and Qa-2, suggesting that the structural organization of these two molecules may be very different. A comparative two-dimensional gel analysis of various class I glycoproteins isolated from resting and activated T and B lymphocytes indicated that class I molecules expressed on activated T cells exhibited an isoelectrophoretic pattern that was distinct from the isoelectrophoretic pattern of class I molecules expessed on the other cell populations. This difference was attributed to a lower sialic acid content of the molecules expressed on activated T cells. Analysis of cell homogenates determined that activated T cells contained a higher level of endogenous neuraminidase activity than was detected in the other populations, suggesting that this may be the basis of the lower sialic acid content. The relationship of the Qa-4 and Qa-2 alloantigens was also examined. It was established that upon mitogen activation, the expression of Qa-4 was greatly decreased, whereas Qa-2 expression was not decreased. However, an anti-Qa-2 monoclonal antibody blocked the binding of an anti-Qa-4 monoclonal antibody to resting cells. These studies established that Qa-4 is a determinant restricted to resting cells, which is closely associated on the surface with the Qa-2 molecule. ^

Ward-Perkins, B., The fall of Rome and the end of civilization, Oxford University Press, Oxford, 2005, 239 páginas

Fil: Sarachu, Pablo. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Ward-Perkins, B., The fall of Rome and the end of civilization, Oxford University Press, Oxford, 2005, 239 páginas

Fil: Sarachu, Pablo. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Ward-Perkins, B., The fall of Rome and the end of civilization, Oxford University Press, Oxford, 2005, 239 páginas

Fil: Sarachu, Pablo. Universidad Nacional de La Plata. Facultad de Humanidades y Ciencias de la Educación; Argentina.

Biostratigraphical investigations of Lago d'Averno, near Naples

Remains of diatoms, molluscs, ostracods, foraminifera and pollen exines preserved in the sediments of Lago d'Averno, a volcanic lake in the Phlegrean Fields west of Naples, allowed us to reconstruct the changes in the ecological conditions of the lake and of the vegetation around it for the period from 800 BC to 800 AD. Lago d'Averno was at first a freshwater lake, temporarily influenced by volcanic springs. Salinity increased slowly during Greek times as a result of subsidence of the surrounding land. Saline conditions developed only after the lake was connected with the sea by a canal, when Portus Julius was built in 37 BC. The first post-Roman period of uplift ended with a short freshwater phase during the 7th century after Christ. Deciduous oakwoods around the lake was transformed into a forest of evergreen oaks in Greek times and thrived there - apparently almost uninfluenced by man - until it was felled, when the Avernus was incorporated into the new Roman harbour in 37 BC, to construct a shipyard and other military buildings there. Land-use was never more intense than during Roman times and weakest in Greek and Early Roman times, when the Avernus was considered a holy place, the entrance to the underworld.

The effect of boundary conditions in the numerical solution of 3-D thermoelastic problems

After the extensive research on the capabilities of the Boundary Integral Equation Method produced during the past years the versatility of its applications has been well founded. Maybe the years to come will see the in-depth analysis of several conflictive points, for example, adaptive integration, solution of the system of equations, etc. This line is clear in academic research. In this paper we comment on the incidence of the manner of imposing the boundary conditions in 3-D coupled problems. Here the effects are particularly magnified: in the first place by the simple model used (constant elements) and secondly by the process of solution, i.e. first a potential problem is solved and then the results are used as data for an elasticity problem. The errors add to both processes and small disturbances, unimportant in separated problems, can produce serious errors in the final results. The specific problem we have chosen is especially interesting. Although more general cases (i.e. transient)can be treated, here the domain integrals can be converted into boundary ones and the influence of the manner in which boundary conditions are applied will reflect the whole importance of the problem.

Some consistent finite element formulations of 1-D beam models: a comparative study

A consistent Finite Element formulation was developed for four classical 1-D beam models. This formulation is based upon the solution of the homogeneous differential equation (or equations) associated with each model. Results such as the shape functions, stiffness matrices and consistent force vectors for the constant section beam were found. Some of these results were compared with the corresponding ones obtained by the standard Finite Element Method (i.e. using polynomial expansions for the field variables). Some of the difficulties reported in the literature concerning some of these models may be avoided by this technique and some numerical sensitivity analysis on this subject are presented.

Random mutagenesis of Thermus aquaticus DNA polymerase I: concordance of immutable sites in vivo with the crystal structure.

Expression of Thermus aquaticus (Taq) DNA polymerase I (pol I) in Escherichia, coli complements the growth defect caused by a temperature-sensitive mutation in the host pol I. We replaced the nucleotide sequence encoding amino acids 659-671 of the O-helix of Taq DNA pol I, corresponding to the substrate binding site, with an oligonucleotide containing random nucleotides. Functional Taq pol I mutants were selected based on colony formation at the nonpermissive temperature. By using a library with 9% random substitutions at each of 39 positions, we identified 61 active Taq pol I mutants, each of which contained from one to four amino acid substitutions. Some amino acids, such as alanine-661 and threonine-664, were tolerant of several or even many diverse replacements. In contrast, no replacements or only conservative replacements were identified at arginine-659, lysine-663, and tyrosine-671. By using a library with totally random nucleotides at five different codons (arginine-659, arginine-660, lysine-663, phenylalanine-667, and glycine-668), we confirmed that arginine-659 and lysine-663 were immutable, and observed that only tyrosine substituted for phenylalanine-667. The two immutable residues and the two residues that tolerate only highly conservative replacements lie on the side of O-helix facing the incoming deoxynucleoside triphosphate, as determined by x-ray analysis. Thus, we offer a new approach to assess concordance of the active conformation of an enzyme, as interpreted from the crystal structure, with the active conformation inferred from in vivo function.