Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

NAPIS Report YTD 1st Quarter-4th Quarter 2007

INAPIS Title III Client Service Unit Report - INAPIS (National Aging Program Information System) Service Unit Report collects and reports service/performance data and related program management information to the federal and state government. This report shows the number of older Iowans who receive services and the number of units by service category from Title III funding of the Older Americans Act, the Administration on Aging (AoA) and limited state general fund dollars. Additionally, it shows the number of persons served by individual services and total "unduplicated" client count across all services. In other words, if you add the total number of clients from all services it is higher than the actual number of persons served across all services, because some people need and receive more than one service. (Please note: this is preliminary data, and may be subject to change.)

Title III-E Report YTD 1st Quarter-4th Quarter 2007

Family Caregiver Support Program (Title III-E) - The Administration on Aging (AoA) has determined that for Title III-E, the actual family caregiver is the client, not the older person receiving the services. Iowa NAPIS (National Aging Program Information System) collects and reports Title III-E service/performance data and related program management information to the federal and state government in a format like the other Title III services. The major shift in reporting relates to who is the client. As a result, this Title III-E Client/Service Unit Report shows the number of caregivers who receive services and the number of units by service category from the Title III-E funding of the Older Americans Act, the AoA, and limited state general fund dollars. Additionally, it shows the number of persons served by individual services and total "unduplicated" client count across all services. In other words, if you add the total number of clients (caregivers) from all services, it is higher than the actual number of persons served across all services because some people need and receive more than one service. (Please note: this is preliminary data, and may be subject to change.) Title III-E Report YTD 1st Quarter 2007 Title III-E Report YTD 2nd Quarter 2007 Title III-E Report YTD 3rd Quarter 2007 Title III-E Report YTD 4th Quarter 2007

Subcontracting and vertical integration in the Spanish cotton industry

This paper examines changes in the organization of the Spanish cotton industry from 1720 to 1860 in its core region of Catalonia. As the Spanish cotton industry adopted the most modern technology and experienced the transition to the factory system, cotton spinning and weaving mills became increasingly vertically integrated. Asset specificity more than other factors explained this tendency towards vertical integration. The probability for a firm of being vertically integrated was higher among firms located in districts with high concentration ratios and rose with size and the use of modern machinery. Simultaneously, subcontracting predominated in other phases of production and distribution where transaction costs appears to be less important.

Labour market in the Catalan cotton textile sector: Employment and fertility (1850-1913)

This paper deals whit the dynamics of the Catalan textile labour market (theSpanish region that concentrated most of the industrial and factory activity duringthe 19 Century) and offers hypotheses and results on the impact it had on livingstandards and fertility levels. We observe the formation of an uneven labourmarket in which male supply for labour (excluding women and children) grewmuch faster than the demand. We stress the fact that labour supply is verydependant on institutional factors liked to the transmition of household propertybetween generations. Instead the slow path of growth of adult males demand forlabour is witnessing the limits of this industry to expand and to compete ininternational markets. The strategy of working class families to adapt to scarceopportunities of employment we document here is the diminution of legitimatefertility levels. Fertility control is the direct instrument we think workers have tocontrol their number in a situation that was likely to create labour surpluses in theshort and mid run.

Effect of silicon and acibenzolar-s-methyl on colored cotton plants infested or not with Aphis gossypii Glover (Hemiptera, Aphididae)

Effect of silicon and acibenzolar-s-methyl on colored cotton plants infested or not with Aphis gossypii Glover (Hemiptera, Aphididae). The aphid Aphis gossypii is an insect pest that causes damage mainly at the beginning of the cotton plant development. The effect of resistance inductors silicon and acibenzolar-s-methyl (ASM) on the development of colored cotton plants were researched in the presence and absence of A. gossypii. Three colored cotton cultivars were sown in pots and individually infested with 25 apterous aphids, 13 days after the application of the inductors. Fifteen days after plant emergence, the silicon was applied at a dosage equivalent to 3 t/ha and acibenzolar-s-methyl in 0.2% solution of the product BION 500®. After 21 days of infestation the following parameters were evaluated: plant height, stem diameter, dry matter of aerial part and root, and total number of aphids replaced. It was verified that the plant height was reduced in the presence of aphids and all variables were negatively affected by the application of ASM. However, silicon did not affect plant development.

The lesser cotton leafworm, Anomis impasta (Guenée) (Lepidoptera, Noctuidae), in cotton

Anomis impasta (Guenée) is a species that shows remarkable morphological and behavioral similarities with the cotton leafworm Alabama argillacea (Hübner). During two growing cotton seasons, A. impasta was observed feeding on leaves and flower bracts of cotton and monitored. Furthermore, a study was conducted under laboratory conditions to generate biological information about this species with larvae feeding cotton squares and leaves. Larvae fed on cotton squares exhibited delayed development (18.5 ± 0.18 days) and lower pupal weight (140.8 ± 2.26 mg) compared to larvae fed on cotton leaves (14.0 ± 0.07 days and 169.3 ± 2.06 mg). Thus, one generation cycle of A. impasta was obtained by feeding the larvae with cotton leaves. The mean (minimum-maximum) values for the duration of eggs, larvae and pupae were: 3.0 (3-4), 14.8 (14-18), and 9.7 (7-14) days, respectively. The viability of the eggs, larvae, and pupae were 43.7, 98.3, and 94.7%, respectively. Females lived on average 25.2 days (ranging from 15 to 37 days) and produced 869 eggs (from 4 to 1,866 eggs). The successful development and reproduction of A. impasta on cotton, especially, on the cotton leaves, suggest the potential of this species to reach a pest status in cotton. The similarities with A. argillacea, as discussed in this study, can be one of the reasons for low reference to A. impasta in the field. Therefore, the information provided here will allow researchers and growers to distinguish these two cotton defoliators.

Population growth and within-plant distribution of the striped mealybug Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae) on cotton

Population growth and within-plant distribution of the striped mealybug Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae) on cotton. The striped mealybug, Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae), is a widely distributed and polyphagous pest species, which naturally occurs on cotton plants in Brazil. This study evaluated the establishment and population growth as well as the within-plant distribution of F. virgata on four cotton cultivars: CNPA 7H (white fibers), BRS Verde, BRS Safira, and BRS Rubi (colored fibers). The experiment was conducted in a complete randomized design with four treatments (cultivars) and 18 replications of each. Thus, cotton plants of each cultivar were infested with 100 newly hatched nymphs of F. virgata. The number of adult female mealybugs and the total number of mealybugs per plant were quantified, respectively, at 25 and 50 days after infestation. The developmental and pre-reproductive periods were also determined. Furthermore, we verified the distribution of F. virgata on the plant parts at 25 and 50 days after infestation. Ferrisia virgata showed similar growth of 412-fold in the four cotton cultivars studied. Also, the nymphs were spread on infested leaves; the secondgeneration nymphs were spread and established in all plant parts. Our results characterize F. virgata as having much potential as an important cotton pest in Brazil.

1st datings of ammonite-bearing Bajocian suites from Caucasus (Georgia) - K-Ar ages of volcanic hornblendes

Volcanic flows and tuffs interbedded with ammonite-bearing sediments directly correlatable with the stratotype section of the Bajocian stage have been dated for the first time within the Caucasus area. Three samples, each from a different section, allowed separation of well-preserved brown hornblende; these are considered reliable geochronometers in a region where subsequent volcanic activity occurred. The dated separates are V139: a volcanic layer probably near the base, V142 another layer near the top of the Lower Bajocian substage; V141 a boulder from a latest Bajocian volcanic conglomerate. From bottom to top, apparent ages at 173.5 +/- 2.6, 164.8 +/- 2.5 and 167.1 +/- 1.9 Ma (analytical uncertainty, 95% confidence level) respectively, can be calculated. The consistency of the results is obtained if the dated boulder is interpreted as derived from an underlying layer, The Bajocian-Bathonian boundary is much younger than commonly accepted and younger than 164 Ma.

1st radiometric dating of a paleontologically dated Bathonian level from Georgia (USSR) - Use of the cathodoluminescence for selection of suitable plagioclases

Jurassic volcanic formations interlayered with (ammonite-bearing) sediments are common in the Caucasus area; this situation is of interest for the numerical calibration of the poorly documented Jurassic portion of the time scale. However, following petrographic study on thin sections no whole-rocks can be considered reliable geochronometers due to subsequent alteration; from about 20 samples, two were selected for plagioclase dating; one (V134) is probably early Kimmeridgian in age; the other (V136) is probably located in the Lower Bathonian stage according to diagnostic ammonites. Cathodoluminescence (CTL) study has shown that sample V136 was similar to usual volcanic feldspars (blue to green colour); however, the lack of CTL of the V134 plagioclase is a character common to diagenetic feldspars; consequently, in spite of a good optical preservation, this geo-chronometer cannot give an age representative of the time of emplacement of the lava flow. We have combined CTL observation with microprobe analysis in order to document the poorly known CTL behaviour of volcanic feldspars; cations Ti4+ and Fe2+ play a major role in the CTL colour of plagioclases and are able to document the growing history of these feldspars ; phenocrysts are initially rich in Fe2+ (core of the crystals, green in colour), then richer in Ti toward the exterior; microcrysts are even richer in Ti (blue to bright blue). We have also observed that natural CTL colour was modified resulting from acid ``cleaning'' of the separated feldspars : the initial blue or green colour tends to change to yellow or violet, respectively, after acid treatment probably due to oxydation of Fe2+ toward Fe3+. X-ray and microprobe analyses both indicated that plagioclases from sample V134 was near the sodic end member (albite) suggesting a diagenetic origin in this andesitic basalt; In contrast, sample V136 contains a calcic plagioclase of common composition for a doleritic basalt. The K-Ar conventional technique was applied as a preliminary tool for radiometric analysis. The Kimmeridgian Na-plagioclase sample gave a ``rejuvenated'' (85 Ma) apparent age which confirms a late genesis for the separated plagioclase phase; this interpretation is based on CTL observation, X-ray analysis, and microprobe analysis ; these techniques are able to distinguish samples which have been submitted to diagenetic alteration from those which have not. An age consistent with the stratigraphic location has been obtained from sample V136. This age of 161 +/- 3 (2-sigma) Ma, is the first one available from a sample palaeontologically located with reasonable precision within the mid Jurassic time.