How widespread is Parthenium hysterophorus and its biological control agent Zygogramma bicolorata in South Asia?

Parthenium hysterophorus is a weed of global significance causing severe economic, environmental, human and animal health problems in Asia, Africa, Australia and the Pacific. In South Asia, P. hysterophorus occurs in India, Pakistan, Sri Lanka, Bangladesh and Nepal. A host-specific leaf-feeding beetle Zygogramma bicolorata from Mexico was introduced into India in 1984, as a biological control agent for P. hysterophorus. In this study, a GIS-based distribution map of P. hysterophorus and its biological control agent Z. bicolorata in South Asia based on meta-analysis is presented. The map highlights the limited published information on P. hysterophorus incidence in many of the states and territories in India, as well as in neighbouring Bangladesh, Bhutan, Nepal and Pakistan. Incidence of Z. bicolorata was recorded as three distinct clusters, covering many states in India. In Pakistan, Z. bicolorata was recorded in the Punjab region bordering India. A CLIMEX model based on the current distribution of Z. bicolorata in India suggests that the geographic range of this agent in India and Pakistan can extend to other P. hysterophorus-infested areas in the region. The CLIMEX model also suggests that all of Bangladesh and Sri Lanka, and parts of Nepal are climatically suitable for Z. bicolorata.

QTL for root angle and number in a population developed from bread wheats (Triticum aestivum) with contrasting adaptation to water-limited environments

Root architecture traits in wheat are important in deep soil moisture acquisition and may be used to improve adaptation to water-limited environments. The genetic architecture of two root traits, seminal root angle and seminal root number, were investigated using a doubled haploid population derived from SeriM82 and Hartog. Multiple novel quantitative trait loci (QTL) were identified, each one having a modest effect. For seminal root angle, four QTL (-log10(P) >3) were identified on 2A, 3D, 6A and 6B, and two suggestive QTL (-log10(P) >2) on 5D and 6B. For root number, two QTL were identified on 4A and 6A with four suggestive QTL on 1B, 3A, 3B and 4A. QTL for root angle and root number did not co-locate. Transgressive segregation was found for both traits. Known major height and phenology loci appear to have little effect on root angle and number. Presence or absence of the T1BL.1RS translocation did not significantly influence root angle. Broad sense heritability (h 2) was estimated as 50 % for root angle and 31 % for root number. Root angle QTL were found to be segregating between wheat cultivars adapted to the target production region indicating potential to select for root angle in breeding programs. © 2013 Springer-Verlag Berlin Heidelberg.

Genetic diversity of subgroup 1 ilarviruses from eastern Australia

This is the first report of the genetic diversity within ilarvirus subgroup 1 from eastern Australia. It supports the separation of tobacco streak virus (TSV) strains from parthenium (Parthenium hysterophorus) and crownbeard (Verbescina encelioides) based on serology and host specificity. It has confirmed one previously described strain of TSV as a member of the species Strawberry necrotic shock virus and another as a new subgroup 1 ilarvirus, ageratum latent virus (AgLV), from Ageratum houstonianum. A multiplex RT-PCR showed that the genetically distinct strains of TSV and AgLV were commonly found in symptomless infections in virus-specific alternative weed hosts growing over a wide geographical range in eastern Australia. TSV has been one of the most damaging viruses in Australian oilseed and pulse crops in recent years, and this study has provided the taxonomic knowledge essential for the development of control programs for these viruses. © 2013 Springer-Verlag Wien.

Das Weltfriedensjahr 1952

Manuscript: "Das Weltfriedensjahr". Essay on the proclamation of an international year of peace to promote peace on earth and outlaw war.

Gabapentin: A Stereochemically Constrained gamma Amino Acid Residue in Hybrid Peptide Design

Nature has used the all-alpha-polypeptide backbone of proteins to create a remarkable diversity of folded structures. Sequential patterns of 20 distinct amino adds, which differ only in their side chains, determine the shape and form of proteins. Our understanding of these specific secondary structures is over half a century old and is based primarily on the fundamental elements: the Pauling alpha-helix and beta-sheet. Researchers can also generate structural diversity through the synthesis of polypeptide chains containing homologated (omega) amino acid residues, which contain a variable number of backbone atoms. However, incorporating amino adds with more atoms within the backbone introduces additional torsional freedom into the structure, which can complicate the structural analysis. Fortunately, gabapentin (Gpn), a readily available bulk drug, is an achiral beta,beta-disubstituted gamma amino add residue that contains a cyclohexyl ring at the C-beta carbon atom, which dramatically limits the range of torsion angles that can be obtained about the flanking C-C bonds. Limiting conformational flexibility also has the desirable effect of increasing peptide crystallinity, which permits unambiguous structural characterization by X-ray diffraction methods. This Account describes studies carried out in our laboratory that establish Gpn as a valuable residue in the design of specifically folded hybrid peptide structures. The insertion of additional atoms into polypeptide backbones facilitates the formation of intramolecular hydrogen bonds whose directionality is opposite to that observed in canonical alpha-peptide helices. If hybrid structures mimic proteins and biologically active peptides, the proteolytic stability conferred by unusual backbones can be a major advantage in the area of medicinal chemistry. We have demonstrated a variety of internally hydrogen-bonded structures in the solid state for Gpn-containing peptides, including the characterization of the C-7 and C-9 hydrogen bonds, which can lead to ribbons in homo-oligomeric sequences. In hybrid alpha gamma sequences, district C-12 hydrogen-bonded turn structures support formation of peptide helices and hairpins in longer sequences. Some peptides that include the Gpn residue have hydrogen-bond directionality that matches alpha-peptide helices, while others have the opposite directionality. We expect that expansion of the polypeptide backbone will lead to new classes of foldamer structures, which are thus far unknown to the world of alpha-polypeptides. The diversity of internally hydrogen-bonded structures observed in hybrid sequences containing Gpn shows promise for the rational design of novel peptide structures incorporating hybrid backbones.

Dynamic growth of tensile cracks by ductile and brittle fracture mechanisms in a viscoplastic material

In this paper, a finite element analysis of steady-state dynamic crack growth under Mode I, plane strain, small-scale yielding conditions is performed in a rate dependent plastic material characterized by the over-stress model. The main objective of the paper is to obtain theoretically the dependence of dynamic fracture toughness on crack speed. Crack propagation due to a ductile (micro-void) mechanism or a brittle (cleavage) mechanism, as well as transition from one mode to another are considered. The conversion from ductile to brittle has been observed experimentally but has received very little attention using analytical methods. Local fracture criteria based on strains and stresses are used to describe ductile and brittle fracture mechanisms. The results obtained in this paper are in general agreement with micro-structural observations of mode conversion during fracture initiation. Finally, the particular roles played by material rate sensitivity and inertia are examined in some detail.

RS and GIS in mapping of geomorphic records and understanding the local controls of glacial retreat from the Baspa Valley, Himachal Pradesh, India

We report here the role of remote sensing (RS) and geographical information system (GIS) in the identification of geomorphic records and understanding of the local controls on the retreat of glaciers of the Baspa Valley, Himachal Pradesh, India. The geomorphic records mapped are accumulation zone, exposed ablation zone, moraine-covered ablation zone, snout, deglaciated valley, lateral moraine, medial moraine, terminal moraine and hanging glacier. Details of these features and stages of deglaciation have been extracted from RS data and mapped in a GIS environment. Glacial geomorphic data have been generated for 22 glaciers of the Baspa Valley. The retreat of glaciers has been estimated using the glacial maxima observed on satellite images. On the basis of percentage of retreat and the critical analysis of glacial geomorphic data for 22 glaciers of the Baspa Valley, they are classified into seven categories of very low to very very high retreat. From the analysis of the above 22 glaciers, it has been found that other than global warming, the retreat of glaciers of the Baspa Valley is inversely proportional to the size of the accumulation zone and the ratio of the moraine covered ablation/exposed ablation zone.

Assessing formability of sheet metals through advanced tensile and LASER speckle analysis

The ability of a metal to resist strain localisation and hence reduction in local thickness, is a most important forming property upon stretching. The uniform strain represents in this regard a critical factor to describe stretching ability - especially when the material under consideration exhibits negative strain rate sensitivity and dynamic strain ageing (DSA). A newly developed Laser Speckle Technique (LST), e.g. see [1], was used in-situ during tensile testing with two extensometers. The applied technique facilitates quantitative information on the propagating plasticity (i.e. the so-called PLC bands) known to take place during deformation where DSA is active. The band velocity (V-band), and the bandwidth (W-band) were monitored upon increasing accumulated strain. The knowledge obtained with the LST was useful for understanding the underlying mechanisms for the formability limit when DSA and negative strain rate sensitivity operate. The goal was to understand the relationship between PLC/DSA phenomena and the formability limit physically manifested as shear band formation. Two principally different alloys were used to discover alloying effects.

Minimizing total weighted tardiness on heterogeneous batch processors with incompatible job families

In this paper, we address a scheduling problem for minimizing total weighted tardiness. The background for the paper is derived from the automobile gear manufacturing process. We consider the bottleneck operation of heat treatment stage of gear manufacturing. Real-life scenarios like unequal release times, incompatible job families, nonidentical job sizes, heterogeneous batch processors, and allowance for job splitting have been considered. We have developed a mathematical model which takes into account dynamic starting conditions. The problem considered in this study is NP-hard in nature, and hence heuristic algorithms have been proposed to address it. For real-life large-size problems, the performance of the proposed heuristic algorithms is evaluated using the method of estimated optimal solution available in literature. Extensive computational analyses reveal that the proposed heuristic algorithms are capable of consistently obtaining near-optimal statistically estimated solutions in very reasonable computational time.

Allosteric regulation and substrate activation in cytosolic nucleotidase II from Legionella pneumophila

Cytosolic nucleotidase II (cN-II) from Legionellapneumophila (Lp) catalyzes the hydrolysis of GMP and dGMP displaying sigmoidal curves, whereas catalysis of IMP hydrolysis displayed a biphasic curve in the initial rate versus substrate concentration plots. Allosteric modulators of mammalian cN-II did not activate LpcN-II although GTP, GDP and the substrate GMP were specific activators. Crystal structures of the tetrameric LpcN-II revealed an activator-binding site at the dimer interface. A double mutation in this allosteric-binding site abolished activation, confirming the structural observations. The substrate GMP acting as an activator, partitioning between the allosteric and active site, is the basis for the sigmoidicity of the initial velocity versus GMP concentration plot. The LpcN-II tetramer showed differences in subunit organization upon activator binding that are absent in the activator-bound human cN-II structure. This is the first observation of a structural change induced by activator binding in cN-II that may be the molecular mechanism for enzyme activation. DatabaseThe coordinates and structure factors reported in this paper have been submitted to the Protein Data Bank under the accession numbers and . The accession number of GMP complexed LpcN-II is . Structured digital abstract andby() andby() Structured digital abstract was added on 5 March 2014 after original online publication]

Perceptions of priority issues in the conservation of biodiversity and ecosystems in India

We report on the results of a country-wide survey of people's perceptions of issues relating to the conservation of biodiversity and ecosystems in India. Our survey, mainly conducted online, yielded 572 respondents, mostly among educated, urban and sub-urban citizens interested in ecological and environmental issues. 3160 ``raw'' questions generated by the survey were iteratively processed by a group of ecologists, environmental and conservation scientists to produce the primary result of this study: a summarized list of 152 priority questions for the conservation of India's biodiversity and ecosystems, which range across 17 broad thematic classes. Of these, three thematic classes-''Policy and Governance'', ``Biodiversity and Endangered Species'' and ``Protection and Conservation''-accounted for the largest number of questions. A comparative analysis of the results of this study with those from similar studies in other regions brought out interesting regional differences in the thematic classes of questions that were emphasized and suggest that local context plays a large role in determining emergent themes. We believe that the ready list of priority issues generated by this study can be a useful guiding framework for conservation practitioners, researchers, citizens, policy makers and funders to focus their resources and efforts in India's conservation research, action and funding landscape. (C) 2015 Elsevier Ltd. All rights reserved.

Liquefaction and Displacement of Saturated Sand Under Vertical Vibration Loading

In order to investigate the influence of the vertical vibration loading on the liquefaction of saturated sand, one dimensional model for the saturated sand with a vertical vibration is presented based on the two phase continuous media theory. The development of the liquefaction and the liquefaction region are analyzed. It is shown that the vertical vibration loading could induce liquefaction. The rate of the liquefaction increases with the increase of the initial limit strain or initial porosity or amplitude and frequency of loading, and increases with the decrease of the permeability or initial modulus. It is shown also that there is a phase lag in the sand column. When the sand permeability distribution is non-uniform, the pore pressure and the strain will rise sharply where the permeability is the smallest, and fracture might be induced. With the development of liquefaction, the strength of the soil foundation becomes smaller and smaller. In the limiting case, landslides or debris flows could occur.

岩土介质中局部化变形研究的一些新进展

岩土中的剪切带产牛通常是断裂和失稳的前兆，常引起滑坡等地质火害，对油气或水合物等矿藏的开采容易导致压实带形成．压实带的产生使岩上孔隙减小，颗粒破碎，从而导致沉陷、对油气的挤压等．本文重点对剪切带的宽度和压实带的研究现状作综述，阐述在该问题的研究上从微观观测到宏观表述的重要性．通过分析，认为还有如下问题值得研究：怎样准确得出局部化变形带的宽度和方向？局部化变形带形成后孔隙水和油气的渗流会发生什么变化？颗粒层次的微结构特性是通过什么方式影响宏观表现的等等．

Efecto de cobertura muerta y fertilización sobre el comportamiento de la cenosis y el crecimiento y rendimiento del cultivo del frijol común (Phaseolus vulgaris L.)

El presente trabajo fue realizado en la comunidad de San Diego, ubicada en el km. 60 de la carretera Jinotepe-Nandaime, departamento de Carazo, durante la época de primera del año de 1994. El propósito del experimento fue evaluar el efecto de diferentes coberturas al suelo y fertilización sobre las cenosis y el crecimiento y rendimiento del frijol común (Phaseolus vulgaris L.). La variedad de frijol utilizada fue Dor-364. Los factores estudiados fueron, Factor A: cobertura de maíz (Zea mays L.), cobertura de sorgo (Sorghum bicolor (L.) Moench), control en período crítico (15 a 21 días después de la siembra) y enmalezado. Factor B: sin fertilización, fertilización inedia (64.56 kg/ha), fertilización normal (129.12 kg/ha). Se utilizó un diseño de bloque completamente al azar (BCA). Los resultados obtenidos se pueden sintetizar de la forma siguiente, la cobertura de sorgo y control en período crítico ejercieron un excelente control de malezas, reduciendo la abundancia y dominancia de las malezas. No hubo efecto significativo en los niveles de fertilización sobre la abundancia y dominancia de las malezas. En cuanto al rendimiento, los mejores resultados se obtuvieron con el uso de cobertura de sorgo. En la fertilización no se encontró efectos significativos en la mayoría de las variables evaluadas. De las coberturas al suelo, la de mejor rentabilidad fue la cobertura de sorgo. El tratamiento sin fertilización es el que tiene mejor rentabilidad con respecto a los tratamientos con fertilizantes.

Establecimiento de un banco de germoplasma de Jatropha curcas L.

Se estableció un banco de germoplasma de tempate (Jatropha curcas L.) en forma de plantación permanente adyacente al camino que conduce a la comarca Cristo Rey, Quezalguaque, León. En 1993 se recolectó semillas de plantas que se encontraban creciendo en forma semisilvestre en distintas regiones de Nicaragua, así como de plantas provenientes de Cabo Verde, Tailandia, Madagascar y México. Las variables evaluadas incluyen las siguientes: altura (longitud del tallo principal), número promedio de ramas, diámetro basal, distancia entre nudos del tallo principal, número y tamaño de las inflorescencias, tamaño y forma de los frutos y semillas, rendimiento de semilla seca, así como la resistencia a plagas, enfermedades y sequía. Los resultados obtenidos indican que existe variabilidad genética entre las plantas pertenecientes a variedades extranjeras y que en la mayoría de los casos las diferencias observadas están enmarcadas entre variedades, siendo la variabilidad intravarietal muy reducida. Los resultados más relevantes están relacionados con el vigor, productividad y precocidad de las diferentes familias y variedades. Las variedades Cabo Verde, Tailandia y Madagascar, en ese orden, presentaron un crecimiento (longitud del tallo principal, número de hojas, diámetro basal) decididamente mayor al de la variedad mexicana. Sin embargo, la precocidad, número de ramas, porcentaje de plantas florecidas y rendimiento de semilla seca fue superior en la variedad mexicana que en el resto de variedades.