Alterações hematológicas e histopatológicas em pacu, Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes, Characidae), tratado com sulfato de cobre (CuSo4)

This paper evaluated the haematological and glycaemic parameters in Piaractus mesopotamicus (Osteichthyes, Characidae) infected with Monogenea Anacanthorus penilabiatus Boeger, Husak & Martins, 1995 (Dactylogyridae) after treatment with 0.50 mg/L and 1.00 mg/L of copper sulphate (CuSO4). The efficacy of the CuSO4 was observed in the first day after administration but not after eight, fifteen or thirty days. The histopathological analyses showed hyperplasia of the epithelium and circulatory changes in the gills. In the first day after treatment significant changes (P<0.05) in the total count of erythrocyte, leucocyte, mean corpuscular haemoglobin concentration (MCHC) were observed. The fishes treated with 0.50 mg/L showed decrease in the haemoglobin levels and in the percentage of neutrophils (P<0.05). The dose of 1.00 mg/L provoked increase of glycaemia but reduction in the lymphocytes percentage when compared with 0.50 mg/L in the 8th day. Fifteen days after 1.00 mg/L treatment, values of mean corpuscular volume (MCV) and special granulocitic cells (S.G.C.) percentage decreased. Nevertheless, increase of total leucocyte number was observed. Thirty days after treatment with 0.50 mg/L showed increased S.G.C. and treatment with 1.00 mg/L showed increased lymphocyte.

Um estudo sobre a corrosão aquosa de ligas de alumínio 7xxx submetidas a diferentes tratamentos térmicos

This job aim has been to study the aqueous corrosion of the 7xxx heattreatable aluminium alloys, used in the aeronautical industry. The 7010, 7050 and 7475 alloys, have been supplied in the T7 condition and submitted to the annealed and aging thermal treatments of in order to study their behaviours front to corrosion in 5% NaCl pH 6,0, air-saturated and deaerated solutions. The electrochemical study has been accomplished through potential measures in open circuit, potentiodynamic polarisation curves and electrochemical impedance spectroscopy (EIS). The aged alloy resulted to be the most resistant to corrosion and annealed the less resistant ones. In spite of it they have different chemical compositions, in each mean, the alloy with the same thermal treatment has behaved in a similar way. In aerated solution, the process is controlled by oxygen diffusion and in oxygen absence for dissolution through a film. Hardness and mass loss measures, after corrosion test, have supported this research.

Efeito do nitrato e nitrito na corrosão das ligas de alumínio 2024 e 7050 em soluções de NaCl

The 2024-T3 and 7050-T7 aluminium alloys electrochemical behavior has been studied in NaCl 5% neutral solutions and 0,1M concentration containing NO 3 - or NO 2 -. The current job supports corrosion research on aluminium alloys used in aeronautic industry. Open circuit potential, polarisation curves and electrochemical impedance spectroscopy techniques have been used. In chloride solutions, alloys corrosion takes place through a pitting mechanism. Added anions to aerated solutions do not possess inhibition effect. In deaerated solutions, nitrite has diminished anodic dissolution rate, probably by incorporating this anion in the oxide and/or hydroxide film.

Desenvolvimento de um dispositivo para obtenção de monocristais de ligas à base de cobre

This paper describes the drawing, construction and optimization of a device, which can be used to obtain single crystals of different metallic materials with melting point from 550 to 1050°C. Components of ease obtaining and of low cost were used. The device was based on the modified Bridgman technique and it was used to obtain single crystals of copper-based alloys. The temperature axial profiles and a difference less then 1% in the temperature between the wall and the center of the ceramic tube in the critical region for obtaining single crystals of good quality indicated that the oven presents a good thermal stability. Single crystals of CuZnAl and CuAlAg alloys of good quality were growth and characterized using optical microscopy and Laüe X-ray back reflection.

Caracterização morfológica da corrosão por pite da liga AL2024 em soluções contendo cloretos e molibdatos

A very new method application for digital image processing and analysis to classify shape and evaluate size and morphology parameters of pit corrosion is used in this paper. This method seems to be very effective to analysis surfaces with low or high degree of pitting formation. Pits formed on 2024 alloy surface by chloride and by chloride + molibdate anions have similar mean area, are found to be widther than deeper and exhibit predominantly conical or near-conical and irregular geometries.

Estudo das características morfológicas dos pites nos materiais resistentes à corrosão

This paper has as a purpose a new alternative technique development to characterize pitting corrosion evolution, aiming classification, size and determination of morphological parameters which rule pits increase. In this case, the method will be applied to the 304 ABNT stainless steel, thermally treated and exposed to different times in salt spray. Different 304 steel conditions, rolled and thermally treated have exhibited similar geometry, predominantly conic, near-conic and irregular pits. On rolled steel, pits width increases faster than height; however, on thermally treated steel, pits are found to increase in height.

Propriedades mecânicas e de corrosão de dois aços inoxidáveis austeníticos utilizados na fabricação de implantes ortopédicos

ASTM F 138 austenitic stainless steel is extensively used as an orthopedic implant material. However, some aspects, such as low strength in the annealed condition and susceptibility to localized corrosion, limit wider use of this kind of steel. Recently, a high-nitrogen austenitic stainless steel, specified in the standard ISO 5832-9, has been indicated as an alternative to ASTM F 138 steel for more severe loading and permanent application inside the human body. In this work, microstructure, mechanical properties, corrosion resistance and fatigue behavior of both steels were determined and compared. ISO 5832-9 steel displayed better mechanical and corrosion behaviors than did ASTM F 138 steel The combination of these features lead ISO steel to enhanced fatigue performance in both neutral and aggressive environments. Analyzed were the role of nitrogen in solid solution, combined with niobium in the Z-phase, and the factors that led to superior ISO 5832-9 properties.

Toxicidade aguda do sulfato de cobre e do extrato aquoso de folhas secas de nim para o caramujo (Pomacea canaliculata)

Snails can become an environmental and economic problem, causing substantial losses. The objective of this work was to estimate the acute toxicity of copper sulfate pentahydrate (CuSO4.5H2O) and the aqueous extract of dried neem leaves on snails (P. canaliculata) under laboratory conditions. In order to estimate the lethal concentration 50% (LC (I)50;96h), snails were exposed to six increasing copper sulfate concentrations (0.0; 0.01; 0.03; 0.05; 0.07 and 0.1 mg L-1) and six increasing concentrations of aqueous extract of dried neem leaves 0.0; 100; 125; 150; 175 and 200 mL aqueous extract of dried neem leaves L-1 water, equivalent to (0.0; 1.18; 1.47; 1.77; 2.06 and 2.36 mg azadirachtin L -1), in triplicate and one control treatment in an entirely random delineation. Estimated LC (I)50;96h, of copper sulfate was 0.02 mg copper sulfate L-1, with a 0.01 mg L-1 lower limit and a 0.03 mg L-1 upper limit. Estimated lethal concentration 50% of the aqueous extract of dried neem leaves was 142.75 mL L-1, equivalent to 1.68 mg L-1 of azadirachtine, with a 130.89 mL L-1 (1.54 mg L-1) low limit and 155.69 mL L-1 (1.83 mg L -1) as the upper limit.

El complejo de cobre de la Southern Perú

Incluye Bibliografía

Aplicação da metodologia de superfície de resposta na remediação de um solo arenoso contaminado artificialmente com cobre

Soil flushing is an alternative remediation technology for soils contaminated with heavy metals, which the main contaminant removing process consists in percolating an extraction solution. This work aimed to use the response surface methodology to point out combinations among the parameters of the extraction solution (Na2EDTA concentration, volume e pH) in order to reduce the concentration of copper in a sandy soil to risk levels lower than the intervention levels for exposure scenarios adopted by the Environmental Company of Sao Paulo State. Thus, a series of tests in leaching columns were carried out using a Fluvisol artificially contaminated (1257,3 mg kg-1). The tests were conducted in triplicate and setup a central composite rotatable design with 15 different parameters combinations of the extraction solution and one replicate in the center point. Using 5% significance level, the adjusted model (R2 = 0,98) indicated combinations of Na2EDTA concentration, pH and volume of the extraction solution which allow reduction of copper concentration below levels reported by environmental agency of Sao Paulo State for industrial, residential, agricultural or maximum exposure scenarios.

Una estrategia de desarrollo basada en recursos naturales: análisis 'cluster' del complejo de cobre de la Southern Perú

Incluye Bibliografía

Mapeamento de Paleosuperfícies associadas a identificação de depósitos supérgenos de cobre como ferramenta de exploração mineral na região de Itapeva e Ribeirão Branco- Vale do Ribeira, estado de São Paulo, Brasil

A few examples of supergene ore formation and their interaction with morphogenesis (palaeosurfaces) and weathering mineralogy are discussed. Geomorphological and mineralogical records to characterize palaeosurfaces associate the weathering of primary minerals and their relationship with concentrations of cooper and iron ore deposits in southeastern state of São Paulo, Brazil. We have distinguished two palaeosurfaces generated by several weathering phases and controlled by the geological framework. The first and oldest upper palaeosurfaces (900 - 1000 m a.s.l.), situated in Riberão Branco (Alto do Brancal), were developed on silico-limestones. It is formed by typical iron laterites enriched by secondary products of cooper. The second and younger level palaeosurfaces located in Itapeva (Santa Blandina and Bairro do Sambra). This palaeosurface is formed by copper percolating through the weathered rock (saprolite). Other features can be observed like neo-formed products in laterites. They are classified into two types: clay like silico- cupriferous products (with noticeable amounts of iron) and copper minerals (crysocolla, in their flat slopes). These features allowed the presence of copper ores and their morphogenesis control will help in the exploration and prospecting of supergene ore mineral.

Síndrome holandés, regalías mineras y políticas de gobierno para un país dependiente de recursos naturales: el cobre en Chile

Incluye Bibliografía

El impacto del programa de estabilización y las reformas estructurales sobre el desempeño ambiental de la minería de cobre en el Perú: 1990-1997

Incluye Bibliografía

El desarrollo de la minería del cobre en la segunda mitad del siglo XX

Incluye Bibliografía