MOE and MOR assessment technologies for improving graded recovery of exotic pines in Australia.

This project was designed to provide the structural softwood processing industry with the basis for improved green and dry grading to allow maximise MGP grade yields, consistent product performance and reduced processing costs. To achieve this, advanced statistical techniques were used in conjunction with state-of-the-art property measurement systems. Specifically, the project aimed to make two significant steps forward for the Australian structural softwood industry: • assessment of technologies, both existing and novel, that may lead to selection of a consistent, reliable and accurate device for the log yard and green mill. The purpose is to more accurately identify and reject material that will not make a minimum grade of MGP10 downstream; • improved correlation of grading MOE and MOR parameters in the dry mill using new analytical methods and a combination of devices. The three populations tested were stiffness-limited radiata pine, strength-limited radiata pine and Caribbean pine. Resonance tests were conducted on logs prior to sawmilling, and on boards. Raw data from existing in-line systems were captured for the green and dry boards. The dataset was analysed using classical and advanced statistical tools to provide correlations between data sets and to develop efficient strength and stiffness prediction equations. Stiffness and strength prediction algorithms were developed from raw and combined parameters. Parameters were analysed for comparison of prediction capabilities using in-line parameters, off-line parameters and a combination of in-line and off-line parameters. The results show that acoustic resonance techniques have potential for log assessment, to sort for low stiffness and/or low strength, depending on the resource. From the log measurements, a strong correlation was found between the average static MOE of the dried boards within a log and the predicted value. These results have application in segregating logs into structural and non-structural uses. Some commercial technologies are already available for this application such as Hitman LG640. For green boards it was found that in-line and laboratory acoustic devices can provide a good prediction of dry static MOE and moderate prediction for MOR.There is high potential for segregating boards at this stage of processing. Grading after the log breakdown can improve significantly the effectiveness of the mill. Subsequently, reductions in non-structural volumes can be achieved. Depending on the resource it can be expected that a 5 to 8 % reduction in non structural boards won’t be dried with an associated saving of $70 to 85/m3. For dry boards, vibration and a standard Metriguard CLT/HCLT provided a similar level of prediction on stiffness limited resource. However, Metriguard provides a better strength prediction in strength limited resources (due to this equipment’s ability to measure local characteristics). The combination of grading equipment specifically for stiffness related predictors (Metriguard or vibration) with defect detection systems (optical or X-ray scanner) provides a higher level of prediction, especially for MOR. Several commercial technologies are already available for acoustic grading on board such those from Microtec, Luxscan, Falcon engineering or Dynalyse AB for example. Differing combinations of equipment, and their strategic location within the processing chain, can dramatically improve the efficiency of the mill, the level of which will vary depending of the resource. For example, an initial acoustic sorting on green boards combined with an optical scanner associated with an acoustic system for grading dry board can result in a large reduction of the proportion of low value low non-structural produced. The application of classical MLR on several predictors proved to be effective, in particular for MOR predictions. However, the usage of a modern statistics approach(chemometrics tools) such as PLS proved to be more efficient for improving the level of prediction. Compared to existing technologies, the results of the project indicate a good improvement potential for grading in the green mill, ahead of kiln drying and subsequent cost-adding processes. The next stage is the development and refinement of systems for this purpose.

Correlation Between The Stability Of Carbonates In Ternary Ln2o3-H2o-Co2 Hydrothermal Systems And Lanthanide Systematics

Phase diagrams for ternary Ln2O3-H2O-CO2 systems for the entire lanthanide series (except promethium) were studied at temperatures in the range 100–950 °C and pressures up to 3000 bar. The phase diagrams obtained for the heavier lanthanides are far more complex, with the appearance of a number of stable carbonate phases. New carbonates isolated from lanthanide systems (Ln ≡ Tm, Yb, Lu) include Ln6(OH)4(CO3)7, Ln4(OH)6-(CO3)3, Ln2O(OH)2CO3, Ln6O2(OH)8(CO3)3 and Ln12O7(OH)10(CO3)6. Stable carbonate phases common to all the lighter lanthanides are hexagonal LnOHCO3 and hexagonal Ln2O2CO3. Ln2(CO3)3• 3H2O is stable from samarium onwards and orthorhombic LnOHCO3 is stable from gadolinium onwards. On the basis of the appearance of stable carbonates, four different groups of lanthanides were established: lanthanum to neodymium, promethium to europium, terbium to erbium and thulium to lutetium. Gadolinium is the connecting element between groups II and III. This is in accordance with the tetrad classification for f transition elements.

A novel approach to structure—flammability correlation in polyphosphate esters

The relationship between the structure and flammability of a number of polyphosphate esters has been examined. The conventional correlation of char residue with limiting oxygen index was found to be unproductive in these polymers, giving insight into the importance of gas-phase reactions in addition to condensed-phase reactions in determining their flammability. A novel approach was sought in understanding the structure-flammability relationships of these polymers relating thermal stability, phosphorus content and limiting oxygen index. An empirical relationship has been derived amongst these three parameters.

Eliciting and encoding expert knowledge on variable selection into classical or Bayesian species distribution models

The quality of species distribution models (SDMs) relies to a large degree on the quality of the input data, from bioclimatic indices to environmental and habitat descriptors (Austin, 2002). Recent reviews of SDM techniques, have sought to optimize predictive performance e.g. Elith et al., 2006. In general SDMs employ one of three approaches to variable selection. The simplest approach relies on the expert to select the variables, as in environmental niche models Nix, 1986 or a generalized linear model without variable selection (Miller and Franklin, 2002). A second approach explicitly incorporates variable selection into model fitting, which allows examination of particular combinations of variables. Examples include generalized linear or additive models with variable selection (Hastie et al. 2002); or classification trees with complexity or model based pruning (Breiman et al., 1984, Zeileis, 2008). A third approach uses model averaging, to summarize the overall contribution of a variable, without considering particular combinations. Examples include neural networks, boosted or bagged regression trees and Maximum Entropy as compared in Elith et al. 2006. Typically, users of SDMs will either consider a small number of variable sets, via the first approach, or else supply all of the candidate variables (often numbering more than a hundred) to the second or third approaches. Bayesian SDMs exist, with several methods for eliciting and encoding priors on model parameters (see review in Low Choy et al. 2010). However few methods have been published for informative variable selection; one example is Bayesian trees (O’Leary 2008). Here we report an elicitation protocol that helps makes explicit a priori expert judgements on the quality of candidate variables. This protocol can be flexibly applied to any of the three approaches to variable selection, described above, Bayesian or otherwise. We demonstrate how this information can be obtained then used to guide variable selection in classical or machine learning SDMs, or to define priors within Bayesian SDMs.

Metal-organic framework structures - how closely are they related to classical inorganic structures?

Metal-organic frameworks (MOFs) have emerged as an important family of compounds for which new properties are increasingly being found. The potential for such compounds appears to be immense, especially in catalysis, sorption and separation processes. In order to appreciate the properties and to design newer frameworks it is necessary to understand the structures from a fundamental perspective. The use of node, net and vertex symbols has helped in simplifying some of the complex MOF structures. Many MOF structures are beginning to be described as derived from inorganic structures. In this tutorial review, we have provided the basics of the node, the net and the vertex symbols and have explained some of the MOF structures. In addition, we have also attempted to provide some leads towards designing newer structures/topologies.

Adult-type hypolactasia: Genotype-phenotype correlation

Adult-type hypolactasia (primary lactose malabsorption, lactase non-persistence) is the most common enzyme deficiency worldwide, and manifests with symptoms of lactose intolerance such as abdominal pain, gas formation and diarrhea. In humans with adult-type hypolactasia, lactase activity is high at birth, but declines during childhood to about one-tenth of the activity at birth. In 2002, a one base polymorphism C/T-13910, located 14 kilobases from the starting codon of the lactase-phlorizin hydrolase (LPH) gene was observed to be associated with the persistence of lactase activity. The T-13910 allele (C/T-13910 and T/T-13910 genotypes) associates with persistence of lactase activity throughout life, whereas the C/C-13910 genotype associates with adult-type hypolactasia. In this thesis work, the timing and mechanism of decline of lactase enzyme activity during development was studied using the C/T-13910 polymorphism as a molecular marker. We observed an excellent correlation between low lactase activity and the C/C-13910 genotype in all subjects > 12 years of age, irrespective their ethnicity. In children of African origin, the lactase activity declined somewhat earlier than among Finnish children. Furthermore, we observed an increasing imbalance in the relative lactase mRNA expression from the C-13910 and T-13910 alleles in Finnish children beginning from five years of age. The genetic test for adult-type hypolactasia showed a sensitivity of 93% and a specificity of 100% in the Finnish children and adolescents > 12 years of age. The relation of milk consumption and the milk-related abdominal complaints to the C/T-13910 genotypes associated with lactase persistence/non-persistence was studied by a questionnaire-based approach in > 2100 Finns. Both Finnish children and adults with the C/C-13910 genotype consumed significantly less dairy products compared to those with the C/T-13910 and T/T-13910 genotypes. Flatulence was the only of the abdominal symptoms of lactose intolerance that subjects with the C/C-13910 genotype reported significantly more often than those with the C/T-13910 and T/T-13910 genotypes. A minor proportion (<10%) of subjects with the C/C-13910 genotype, nevertheless, reported drinking milk without any symptoms afterwards. There was no association between cow's milk allergy starting as a newborn and adult-type hypolactasia. In an association study an increased risk of colorectal cancer was observed among those with molecular diagnosis of adult-type hypolactasia. It warrants further studies to clarify whether the increased risk observed in the Finnish population is associated with lactose or decreased intake of dairy products in these subjects.

Correlation between NIRS generated and chemically measured feed quality data in barley (Hordeum vulgare), and potential use in QTL analysis identification

A study was performed to investigate the value of near infrared reflectance spectroscopy (NIRS) as an alternate method to analytical techniques for identifying QTL associated with feed quality traits. Milled samples from an F6-derived recombinant inbred Tallon/Scarlett population were incubated in the rumen of fistulated cattle, recovered, washed and dried to determine the in-situ dry matter digestibility (DMD). Both pre- and post-digestion samples were analysed using NIRS to quantify key quality components relating to acid detergent fibre, starch and protein. This phenotypic data was used to identify trait associated QTL and compare them to previously identified QTL. Though a number of genetic correlations were identified between the phenotypic data sets, the only correlation of most interest was between DMD and starch digested (r = -0.382). The significance of this genetic correlation was that the NIRS data set identified a putative QTL on chromosomes 7H (LOD = 3.3) associated with starch digested. A QTL for DMD occurred in the same region of chromosome 7H, with flanking markers fAG/CAT63 and bPb-0758. The significant correlation and identification of this putative QTL, highlights the potential of technologies like NIRS in QTL analysis.

Non-Abelian monopoles break color. I. Classical mechanics

Monopoles which are sources of non-Abelian magnetic flux are predicted by many models of grand unification. It has been argued elsewhere that a generic transformation of the "unbroken" symmetry group H cannot be globally implemented on such monopoles for reasons of topology. In this paper, we show that similar topological obstructions are encountered in the mechanics of a test particle in the field of these monopoles and that the transformations of H cannot all be globally implemented as canonical transformations. For the SU(5) model, if H is SU(3)C×U(1)em, a consequence is that color multiplets are not globally defined, while if H is SU(3)C×SU(2)WS×U(1)Y, the same is the case for both color and electroweak multiplets. There are, however, several subgroups KT, KT′,… of H which can be globally implemented, with the transformation laws of the observables differing from group to group in a novel way. For H=SU(3)C×U(1)em, a choice for KT is SU(2)C×U(1)em, while for H=SU(3)C×SU(2)WS×U(1)Y, a choice is SU(2)C×U(1)×U(1)×U(1). The paper also develops the differential geometry of monopoles in a form convenient for computations.

Assessing the potential of the rust fungus Puccinia spegazzinii as a classical biological control agent for the invasive weed Mikania micrantha in Papua New Guinea

The rust fungus Puccinia spegazzinii was introduced into Papua New Guinea (PNG) in 2008 as a classical biological control agent of the invasive weed Mikania micrantha (Asteraceae), following its earlier release in India, mainland China and Taiwan. Prior to implementing field releases in PNG, assessments were conducted to determine the most suitable rust pathotype for the country, potential for damage to non-target species, most efficient culturing method and potential impact to M. micrantha. The pathotype from eastern Ecuador was selected from the seven pathotypes tested, since all the plant populations evaluated from PNG were highly susceptible to it. None of the 11 plant species (representing eight families) tested to confirm host specificity showed symptoms of infection, supporting previous host range determination. A method of mass-producing inoculum of the rust fungus, using a simple technology which can be readily replicated in other countries, was developed. Comparative growth trials over one rust generation showed that M. micrantha plants infected with the rust generally had both lower growth rates and lower final dry weights, and produced fewer nodes than uninfected plants. There were significant correlations between the number of pustules and (a) the growth rate, (b) number of new nodes and (c) final total dry weight of single-stemmed plants placed in open sunlight and between the number of pustules and number of new nodes of multi-stemmed plants placed under cocoa trees. The trials suggest that field densities of M. micrantha could be reduced if the rust populations are sufficiently high. Crown Copyright (C) 2013 Published by Elsevier Inc. All rights reserved.

Prospects for the classical biological control of Calotropis procera (Apocynaceae) using co-evolved insects

Calotropis procera (Apocynaceae), a native of tropical Africa, the Middle East and the Indian subcontinent, is a serious environmental and rangeland weed of Australia and Brazil. It is also a weed in Hawaii in USA, the Caribbean Islands, the Seychelles, Mexico, Thailand, Vietnam and many Pacific Islands. In the native range C. procera has many natural enemies, thus classical biological control could be the most cost-effective option for its long-term management. Based on field surveys in India and a literature search, some 65 species of insects and five species of mites have been documented on C. procera and another congeneric-invador C. gigantea in the native range. All the leaf-feeding and stem-boring agents recorded on Calotropis spp. have wide host range. Three pre-dispersal seed predators,the Aak weevil Paramecops farinosus and the Aak fruit fly Dacuspersicus in the Indian subcontinent, and the Sodom apple fruit fly Dacus longistylus in the Middle East have been identified as prospective biological control agents based on their field host range. In Australia and Brazil, where C. procera has the potential to spread across vast areas, pre-dispersal seed predators would help to limit the spread of the weed. While the fruits of C. procera vary in size and shape across its range, those from India are similar to the ones in Australia and Brazil. Hence, seed-feeding insects from India are more likely to be suitable due to adaptation to fruit size and morphology. Future survey efforts for potential biological control agents should focus on North Africa.

Classical solitons with no quantum counterparts and their supersymmetric revival

We demonstrate the phenomenon stated in the title, using for illustration a two-dimensional scalar-field model with a triple-well potential {fx837-1}. At the classical level, this system supports static topological solitons with finite energy. Upon quantisation, however, these solitons develop infinite energy, which cannot be renormalised away. Thus this quantised model has no soliton sector, even though classical solitons exist. Finally when the model is extended supersymmetrically by adding a Majorana field, finiteness of the soliton energy is recovered.

Crude oil and agricultural futures: An analysis of correlation dynamics

Correlations between oil and agricultural commodities have varied over previous decades, impacted by renewable fuels policy and turbulent economic conditions. We estimate smooth transition conditional correlation models for 12 agricultural commodities and WTI crude oil. While a structural change in correlations occurred concurrently with the introduction of biofuel policy, oil and food price levels are also key influences. High correlation between biofuel feedstocks and oil is more likely to occur when food and oil price levels are high. Correlation with oil returns is strong for biofuel feedstocks, unlike with other agricultural futures, suggesting limited contagion from energy to food markets.

Overcoming barriers to the successful implementation of a classical biological control strategy for the exotic invasive weed Mikania micrantha in the Asia-Pacific region

Mikania micrantha (Asteraceae) commonly known as mikania, is a major invasive alien plant (IAP) in the tropical humid agricultural and forest zones of the Asia-Pacific region. This fast-growing Neotropical vine is able to smother plants in agricultural ecosystems, agroforestry and natural habitats, reducing productivity and biodiversity. Fungal pathogens were first investigated for the classical biological control of this weed in 1996. This resulted in the selection and screening of the highly host-specific and damaging rust pathogen, Puccinia spegazzinii (Pucciniales). It was first released in India and China in 2005/6, although it is not believed to have established. Since then, it has been released successfully in Taiwan, Papua New Guinea (PNG), Fiji and most recently Vanuatu. The rust has established and is spreading rapidly after applying lessons learned from the first releases on the best rust pathotype and release strategy. In PNG, direct monitoring of vegetation change has demonstrated that the rust is having a significant impact on M. micrantha, with no unpredicted non-target impacts. Despite this, the authorities in many countries where mikania is a problem remain cautious about releasing the rust. In Western Samoa, introduction of the rust was not pursued because of a conflict of interest, and the perception that mikania suppresses even worse weeds. For some, ‘pathophobia’ is still a major obstacle. In Indonesia, where insects for weed CBC have been introduced, pathogens will currently not be considered. In other countries such as Bhutan and Myanmar, there are no baseline data on the presence and impact of IAPs and, with no history of CBC, no institutional framework for implementing this approach. Malaysia has a well-developed framework, but capacity needs to be built in the country. Overall, it remains critical to have champions at decision making levels. Hence, even with an effective ‘off-the-shelf’ agent available, implementation of mikania CBC still requires significant inputs tailored to the countries’ specific needs.

Allosteric serine hydroxymethyltransferase from monkey liver: Correlation of conformational changes caused by denaturants with the alterations in catalytic activity

The far-ultraviolet region circular dichroic spectrumof serine hydroxymethyltransferase from monkey liver showed that the protein is in an α-helical conformation. The near ultraviolet circular dichoric spectrum revealed two negative bands originating from the tertiary conformational environment of the aromatic amino acid residues. Addition of urea or guanidinium chloride perturbed the characteristic fluorescence and far ultraviolet circular dichroic spectrum of the enzyme. The decrease in (θ)222 and enzyme activity followed identical patterns with increasing concentrations of urea, whereas with guanidinium chloride, the loss of enzyme activity preceded the loss of secondary structure. 2-Chloroethanol, trifluoroethanol and sodium dodecyl sulphate enhanced the mean residue ellipticity values. In addition, sodium dodecyl sulphate also caused a perturbation of the fluorescence emission spectrum of the enzyme. Extremes of pH decreased the – (θ)222 value. Plots of –(θ)222and enzyme activity as a function of pH showed maximal values at pH 7.4-7.5. These results suggested the prevalence of "conformational flexibility" in the structure of serine hydroxymethyltransferase.

Atypical correlation of otolith strontium : calcium and barium : calcium across a marine–freshwater life history transition of a diadromous fish

Variation in strontium (Sr) and barium (Ba) within otoliths is invaluable to studies of fish diadromy. Typically, otolith Sr : Ca is positively related to salinity, and the ratios of Ba and Sr to calcium (Ca) vary in opposite directions in relation to salinity. In this study of jungle perch, Kuhlia rupestris, otolith Sr : Ca and Ba : Ca, however, showed the same rapid increase as late-larval stages transitioned directly from a marine to freshwater environment. This transition was indicated by a microstructural check mark on otoliths at 35–45 days age. As expected ambient Sr was lower in the fresh than the marine water, however, low Ca levels (0.4 mg L–1) of the freshwater resulted in the Sr : Ca being substantially higher than the marine water. Importantly, the otolith Sr : Ba ratio showed the expected pattern of a decrease from the marine to freshwater stage, illustrating that Sr : Ba provided a more reliable inference of diadromous behaviour based on prior expectations of their relationship to salinity, than did Sr : Ca. The results demonstrate that Ca variation in freshwaters can potentially be an important influence on otolith element : Ca ratios and that inferences of marine–freshwater habitat use from otolith Sr : Ca alone can be problematic without an understanding of water chemistry.