Prevalencia de síntomas musculo-esqueléticos en trabajadores de una institución de educación superior en el departamento de Arauca, Colombia, 2015

Introducción Los desórdenes musculo esqueléticos representan uno de los problemas de salud ocupacional más comunes de trabajadores, lo cual genera ausentismo laboral y aumento en los costos de enfermedades laborales. Objetivo Estimar la prevalencia de síntomas osteomusculares y su relación con factores de riesgo ocupacional, en personal docente y administrativo de una institución de educación superior en el Departamento de Arauca para el año 2015. Métodos Estudio analítico de corte transversal en una muestra de 116 trabajadores. Se utilizaron dos instrumentos: “La Encuesta Nacional de Condiciones de Trabajo” del Instituto Nacional de Seguridad e Higiene en el Trabajo de España (INSHT) y el “Cuestionario Ergopar”, validados al Español. Se obtuvo previa autorización del Comité de ética de la Universidad del Rosario. El análisis estadístico se realizó con el IBM SPSS Statistics versión 20.0. Resultados: Los síntomas osteomusculares con mayor prevalencia fueron en cuello (86,2%), espalda lumbar (61,2%), manos muñecas (59,5%) y pies (52,6%); no se observaron diferencias estadísticamente significantes entre administrativos e instructores. En el lugar de trabajo los factores de riesgo con mayor prevalencia fueron exposición a temperaturas extremas (48,3%), aberturas y huecos desprotegidos, escaleras, plataformas, desniveles (44%) significativamente mayor en instructores (52,6%) que en personal administrativo (27,5%) (p= 0,010). Conclusiones: Los síntomas osteomusculares más prevalentes fueron aquellos propios de la actividad docente: cuello, espalda lumbar, manos muñecas y pies. El personal de la institución en especial los docentes está expuesto a factores de riesgo físico, químico y ergonómico. Las condiciones de trabajo son adecuadas. No se encontró asociación estadística entre exposición a factores de riesgo en el puesto de trabajo y prevalencia de síntomas osteomusculares. Se debe establecer acciones dirigidas a evitar lesiones musculo esqueléticas en la población.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply chain from clients to consultants, contractors, sub-contractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, based on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with tendering are highly variable, 1-15%, depending upon what precisely is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

The influence of serifs on 'h' and 'i': useful knowledge from design-led scientific research

The typographical naivety of much scientific legibility research has caused designers to question the value of the research and the results. Examining the reasons underlying this questioning, the paper discusses the importance of designers being more accepting of scientific findings, and why legibility investigations have value. To demonstrate how typographic knowledge can be incorporated into the design of studies to increase their validity, the paper reports on a new investigation into the role of serifs when viewed at a distance. The experiment looks into the identification of the lowercase letters ‘j’, ‘i’, ‘l’, ‘b’, ‘h’, ‘n’, ‘u’, and ‘a’ in isolation. All of the letters originate in the same typeface and are presented in one version with serifs and one version without serifs. Although the experiment found no overall legibility difference between the sans serif and the serif versions, the study showed that letters with serifs placed on the vertical extremes were more legible at a distance than the same letters in a sans serif. These findings can therefore provide specific guidance on the design of individual letters and demonstrate the product of collaboration between designer and scientist on the planning, implementation, and analysis of the study.

Typographic layout and first impressions: testing how changes in text layout influence reader's judgments of documents

This study explores how the typographic layout of information influences readers' impressions of magazine contents pages. Thirteen descriptors were used in a paired comparison procedure that assessed whether participants' rhetorical impressions of a set of six controlled documents change in relation to variations in layout. The combinations of layout attributes tested were derived from the structural attributes associated with three patterns of typographic differentiation (high, moderate, and low) described in a previous study (see Moys, 2014). The content and the range of stylistic attributes applied to the test material were controlled in order to focus on layout attributes. Triangulation of the quantitative and qualitative data indicates that, even within the experimental confines of limited stylistic differentiation, the layout attributes associated with patterns of high, moderate, and low typographic differentiation do influence readers' rhetorical judgments. In addition, the findings emphasize the importance of considering inter-relationships between clusters of typographic attributes rather than testing isolated variables.

Investigating readers’ impressions of typographic differentiation using repertory grids

Document designers combine a range of stylistic and structural typographic attributes to articulate and differentiate information for readers. This paper explores how the kind of typographic differentiation used in a document influences readers’ impressions of documents. A preliminary study indicated that three patterns of typographic differentiation (high, moderate and low) might underlie participants’ impressions of magazine design. Subsequently, a set of nine magazine layouts with controlled content was purposefully developed to systematically examine the impact of high, moderate and low patterns of typographic differentiation on participants’ impressions of documents. These documents were used in a repertory grid procedure to investigate the kind of impressions readers articulate in relation to typographic presentation and whether readers are likely to formulate similar or differing impressions from high, moderate, and low patterns of typographic differentiation. The results suggest that typographic differentiation influences a range of rhetorical and experiential judgments. For example, participants described high differentiation documents as the most attention-grabbing and easy to skim-read, while they considered moderate and low differentiation documents to require deeper reading strategies. In addition, participants assumed high differentiation documents to be much more sensationalist than moderate or low differentiation documents, which they generally perceived as authoritative and credible.

Emission of polycyclic aromatic hydrocarbons from gasohol and ethanol vehicles

The exhaust emission of the polycyclic aromatic hydrocarbons (PAHs) considered toxic to human health were investigated on two spark ignition light duty vehicles, one being gasohol (Gasohol, in Brazil, is the generic denomination for mixtures of pure gasoline plus 20-25% of anhydrous ethyl alcohol fuel (AEAF).)-fuelled and the other a flexible-fuel vehicle fuelled with hydrated ethanol. The influence of fuel type and quality, aged lubricant oil type and use of fuel additives on the formation of these compounds was tested using standardized tests identical to US FTP-75 cycle. PAH sampling and chemical analysis followed the basic recommendations of method TO-13 (United States. Environmental Protection Agency, 1999. Compendium Method TO-13A - Determination of polycyclic Aromatic hydrocarbons (PAH) in Ambient Air Using Gas Chromatography/Mass Spectrometry (CG/MS). Center for environmental research information, Cincinnati, p. 78), with the necessary modification for this particular application. Results showed that the total PAH emission factor varied from 41.9 mu g km(-1) to 612 mu g km(-1) in the gasohol vehicle, and from 11.7 mu g km(-1) to 27.4 mu g km(-1) in the ethanol-fuelled vehicle, a significant difference in favor of the ethanol vehicle. Generally, emission of light molecular weight PAHs was predominant, while high molecular weights PAHs were not detected. In terms of benzo(a)pyrene toxicity equivalence, emission factors varied from 0.00984 mu g TEQ km(-1) to 4.61 mu g TEQ km(-1) for the gasohol vehicle and from 0.0117 mu g TEQ km(-1) to 0.0218 mu g TEQ km(-1) in the ethanol vehicle. For the gasohol vehicle, results showed that the use of fuel additive causes a significant increase in the emission of naphthalene and phenanthrene at a confidence level of 90% or higher; the use of rubber solvent on gasohol showed a reduction in the emission of naphthalene and phenanthrene at the same confidence level; the use of synthetic oil instead of mineral oil also contributed significantly to a decrease in the emission of naphthalene and fluorene. In relation to the ethanol vehicle, the same factors were tested and showed no statistically significant influence on PAH emission. (c) 2008 Elsevier Ltd. All rights reserved.

GIS_EM (Geographic information system for environmental monitoring) - A software implemented at Paulínia refinery (REPLAN) for management of environmental data

The computational program called GIS_EM (Geographic Information System for Environmental Monitoring), a software devised to manage geographic information for monitoring soil, surface, and ground water, developed for use in the Health, Safety, and Environment Division of Paulinia Refinery is presented. This program enables registering and management of alphanumeric information pertaining to specific themes such as drilling performed for sample collection and for installation of monitoring wells, geophysical and other tests, results of chemical analyses of soil, surface, and groundwater, as well as reference values providing orientation for soil and water quality, such as EPA, Dutch List, etc. Management of such themes is performed by means of alphanumeric search tools, with specific filters and, in the case of spatial search, through the selection of spatial elements (themes) in map view. Documents existing in digital form, such as reports, photos, maps, may be registered and managed in the network environment. As the system centralizes information generated upon environmental investigations, it expedites access to and search of documents produced and stored in the network environment, minimizing search time and the need to file printed documents. This is an abstract of a paper presented at the AIChE Annual Meeting and Fall Showcase (Cincinnati, OH 10/30/2005-11/4/2005).

Coumarins from Brosimum gaudichaudii

The new coumarin, (+)-(2'S,3'R)-3-hydroxymarmesin [1], was isolated from the aqueous fraction of the EtOH extract of the root bark of Brosimum gaudichaudii (Moraceae).