In vitro antibacterial and chemical properties of essential oils including native plants from Brazil against pathogenic and resistant bacteria

The antimicrobials products from plants have increased in importance due to the therapeutic potential in the treatment of infectious diseases. Therefore, we aimed to examine the chemical characterisation (GC-MS) of essential oils (EO) from seven plants and measure antibacterial activities against bacterial strains isolated from clinical human specimens (methicillin-resistant Staphylococcus aureus (MRSA) and sensitive (MSSA), Escherichia coli, Pseudomonas aeruginosa, Salmonella Typhimurium) and foods (Salmonella Enteritidis). Assays were performed using the minimal inhibitory concentration (MIC and MIC90%) (mg/mL) by agar dilution and time kill curve methods (log CFU/mL) to aiming synergism between EO. EO chemical analysis showed a predominance of terpenes and its derivatives. The highest antibacterial activities were with Cinnamomun zeylanicum (0.25 mg/mL on almost bacteria tested) and Caryophyllus aronzaticus EO (2.40 mg/mL on Salmonella Enteritidis), and the lowest activity was with Eugenia uniflora (from 50.80 mg/mL against MSSA to 92.40 mg/mL against both Salmonella sources and P aeruginosa) EO. The time kill curve assays revealed the occurrence of bactericide synergism in combinations of C. aromaticus and C. zeylanicum with Rosmarinus. officinalis. Thus, the antibacterial activities of the EO were large and this can also be explained by complex chemical composition of the oils tested in this study and the synergistic effect of these EO, yet requires further investigation because these interactions between the various chemical compounds can increase or reduce (antagonism effect) the inhibitory effect of essential oils against bacterial strains.

Determinação do teor alcoólico da cachaça: uma abordagem das propriedades intensivas

The Resolution number 3 of the Câmara de Educação Básica (CEB)/Conselho Nacional de Educação (CNE), published in 1998, June 26 (BRASIL, 1998), which established the National Curriculum Guidelines for High School Education, emphasizes the interdisciplinarity, in its 8th Article. However, almost fourteen years later, the reality in most of our schools is the adoption of a merely disciplinary methodology, vis-à-vis the difficulty related to educational planning activities of this kind. In this paper, we present a proposal of an interdisciplinary experimental activity that addresses the concept of surface tension, connecting physicists and chemists. The idea is that students determine the alcohol content of “cachaça” and discuss the concepts of surface tension forces between equal molecules, similar and different.

The Ultraviolet Protection Factor of Naturally-pigmented Cotton

Textile Technology: The sun-blocking properties of a textile are enhanced when a dye, pigment, delustrant, or ultraviolet absorber finish is present that absorbs ultraviolet radiation and blocks its transmission through a fabric to the skin. For this reason, dyed fabrics provide better sun protection than bleached fabrics. Since naturally-colored cottons contain pigments that produce shades ranging from light green to tan and brown, it seemed reasonable to postulate that they would provide better sun protection than conventional bleached cotton, and that natural pigments might prove more durable to laundering and light exposure than dyes, but there is no published research on the ultraviolet transmission values for naturally-pigmented cottons. The purpose of this study was to determine the ultraviolet protection (UPF) values of naturally-pigmented cotton in three shades (green, tan, and brown), and the effect of light exposure and laundering on the sun-blocking properties of naturally-pigmented cotton. Naturally-pigmented cotton specimens were exposed to xenon light and accelerated laundering, ultraviolet transmission values measured, and UPF values calculated following light exposure and laundering. The naturally-pigmented cottons exhibited significantly higher UPF values than conventional cotton (bleached or unbleached). Although xenon light exposure and laundering caused some fading, the UPF values of naturally-pigmented cotton continue to be sufficiently high so that all three shades continue to provide good sun protection after the equivalent of 5 home launderings and 80 American Association of Textile Chemists and Colorists fading units (AFUs) of xenon light exposure.

Flow injection analysis of free glycerol in biodiesel using a copper electrode as an amperometric detector

The main goal of this work was to develop a simple analytical method for quantification of glycerol based on the electrocatalytic oxidation of glycerol on the copper surface adapted in a flow injection system. Under optimal experimental conditions, the peak current response increases linearly with glycerol concentration over the range 60-3200 mg kg(-1) (equivalent to 3-160 mg L(-1) in solution). The repeatability of the electrode response in the flow injection analysis (FIA) configuration was evaluated as 5% (n = 10), and the detection limit of the method was estimated to be 5 mg kg(-1) in biodiesel (equivalent to 250 mu g L(-1) in solution) (S/N = 3). The sample throughput under optimised conditions was estimated to be 90 h(-1). Different types of biodiesel samples (B100), as in the types of vegetable oils or animal fats used to produce the fuels, were analysed (seven samples). The only sample pre-treatment used was an extraction of glycerol from the biodiesel sample containing a ratio of 5 mL of water to 250 mg of biodiesel. The proposed method improves the analytical parameters obtained by other electroanalytical methods for quantification of glycerol in biodiesel samples, and its accuracy was evaluated using a spike-and-recovery assay, where all the biodiesel samples used obtained admissible values according to the Association of Official Analytical Chemists. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

Carotenoids and polyphenols in nutricosmetics, nutraceuticals, and cosmeceuticals

The market for cosmeceuticals continues with significant annual growth, but today consumers are more aware of nutritional products that contribute to both skin health and disease prevention. In the last 10 years, pharmacists, chemists, nutritionists, and physicians have been working together to develop new nutritional applications to satisfy peoples needs and demands. As a recent result of convergence phenomenon between cosmetics and food industries, nutricosmetics is a blurry area unfamiliar to many consumers and sometimes even to foods and cosmetics experts. Characterized by oral supplementation of nutrients, nutricosmetics are also known as beauty pills,beauty from within, and even oral cosmetics. The major claim is the antiaging effect, reducing wrinkles by fighting free radicals generated by solar radiation. Among the ingredients used in nutricosmetics, antioxidants represent the most crucial. The best-known antioxidants are carotenoids (beta-carotene, lycopene, lutein, zeaxanthin, and astaxanthin) and polyphenols (anthocyanidins, catechins, flavonoids, tannins, and procyanidins). This study presents an overview about the concept of nutricosmetics and gives us information about the difference between nutricosmetics, nutraceuticals, and cosmeceuticals. The article also discusses about carotenoids and polyphenols, two classes of ingredients often employed in such products.

Evaluation of plasmatic MMP-8, MMP-9, TIMP-1 and MPO levels in obese and lean women

Objectives: To compare the plasma concentrations of matrix metalloproteinase (MMP)-9, tissue inhibitor of MMP (TIMP)-1, MMP-8, and myeloperoxidase (MPO) for obese and lean women. Design and methods: We recruited 30 lean and 36 obese women without comorbidities. The MMP-9, TIMP-1, and MMP-8 levels were measured using enzyme-linked immunosorbent assay (ELISA). MPO activity was assessed by a colorimetric assay. Results: Obese women had higher MMP-9 levels and MMP-9:TIMP-1 ratios than lean women. Conversely, the MMP-8 levels and MMP-8:TIMP-1 ratios in the obese women were significantly lower than those in the lean women despite neutrophil activation, which was assessed by MPO activity., Conclusion: We observed that MMP-9 and MMP-8 had distinct profiles, which suggested that these 2 enzymes play different roles in obesity. (C) 2012 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Lipid fingerprinting in women with early-onset preeclampsia: A first look

Objectives: The aim of this preliminary study was to characterize the plasma lipid profiling of women with preeclampsia. Design and methods: Plasma samples of 8 pregnant women with early-onset preeclampsia and 8 normal pregnant women were evaluated. Lipids were extracted from plasma using the Bligh-Dyer protocol. The extracts were subjected to MALDI-MS. Data matrix was exported for partial least squares discriminant analysis (PLS-DA) and a parameter VIP was employed to reflect the variable importance in the discriminant analysis. The major discriminant variables were selected and underwent to Mann-Whitney U test. Results: A total of 1290 ions were initially identified and twelve m/z signals were highlighted as the most important lipids for the discrimination of patients with preeclampsia. The identification of these differential lipids was carried out through Lipid Database Search. Conclusions: The main classes identified were glycerophosphocholines [GP01], glycerophosphoserines [GP03], glycerophosphoglycerols [GP04], glycosyldiradylglycerols [GL05] and glycerophosphates [GP10]. (C) 2012 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Messa a punto di procedure per la semi-sintesi di composti ad attività antitumorale partendo da prodotti naturali. Studi di struttura-attività

Camptothecin, (CPT) is a pentacyclic alkaloid isolated for the first time from the Chinese tree Camptotheca acuminata, and which has soon attracted the attention of medicinal chemists and pharmacologists due to its promising anti-cancer activity against the most aggressive histo-types. So far, most of the synthesized camptothecin analogues are A and B ring modified compounds, which have been prepared via synthetic or semi-synthetic routes. To the best of our knowledge, a very limited number of C, D, or E ring modified analogues of CPT have been reported; moreover, the few derivatives known from the literature showed a reduced or no biological activity. This dissertation presents synthetic studies on camptothecin new derivatives along with the development of a new and general semi-synthetic methodology to obtain a large variety of analogues. We report here the semi-synthesis of a new family of 5-substituted CPT's, along with their biological activity evaluation, which will be compared with reference compounds. The use of carrier-linked prodrugs has emerged as a useful strategy to overcome some of the drawbacks related with the use of the parent drug, such as low solubility, membrane permeability properties, low oral absorption, instability, toxicity, and nontargeting. Herein we report CPT-prodrugs synthesized via ring opening of the lactone moiety as 17-O-acyl camptothecin tripartate conjugates, which bear a polyamine side chain with different architectures, as the carriers. Moreover, we found that the replacement of the oxygen atom with sulphur on the piridone D-ring, dramatically improves the potency of the novel 16a-thio-camptothecin derivatives, opening new possibilities in the modelling of this class of compounds.

De Novo Design of secondary structures: Synthesis and conformational studies

Chemists have long sought to extrapolate the power of biological catalysis and recognition to synthetic systems. These efforts have focused largely on low molecular weight catalysts and receptors; however, biological systems themselves rely almost exclusively on polymers, proteins and RNA, to perform complex chemical functions. Proteins and RNA are unique in their ability to adopt compact, well-ordered conformations, and specific folding provides precise spatial orientation of the functional groups that comprise the “active site”. These features suggest that identification of new polymer backbones with discrete and predictable folding propensities (“foldamers”) will provide a basis for design of molecular machines with unique capabilities. The foldamer approach complements current efforts to design unnatural properties into polypeptides and polynucleotides. The aim of this thesis is the synthesis and conformational studies of new classes of foldamers, using a peptidomimetic approach. Moreover their attitude to be utilized as ionophores, catalysts, and nanobiomaterials were analyzed in solution and in the solid state. This thesis is divided in thematically chapters that are reported below. It begins with a very general introduction (page 4) which is useful, but not strictly necessary, to the expert reader. It is worth mentioning that paragraph I.3 (page 22) is the starting point of this work and paragraph I.5 (page 32) isrequired to better understand the results of chapters 4 and 5. In chapter 1 (page 39) is reported the synthesis and conformational analysis of a novel class of foldamers containing (S)-β3-homophenylglycine [(S)-β3-hPhg] and D- 4-carboxy-oxazolidin-2-one (D-Oxd) residues in alternate order is reported. The experimental conformational analysis performed in solution by IR, 1HNMR, and CD spectroscopy unambiguously proved that these oligomers fold into ordered structures with increasing sequence length. Theoretical calculations employing ab initio MO theory suggest a helix with 11-membered hydrogenbonded rings as the preferred secondary structure type. The novel structures enrich the field of peptidic foldamers and might be useful in the mimicry of native peptides. In chapter 2 cyclo-(L-Ala-D-Oxd)3 and cyclo-(L-Ala-DOxd) 4 were prepared in the liquid phase with good overall yields and were utilized for bivalent ions chelation (Ca2+, Mg2+, Cu2+, Zn2+ and Hg2+); their chelation skill was analyzed with ESI-MS, CD and 1HNMR techniques and the best results were obtained with cyclo-(L-Ala-D-Oxd)3 and Mg2+ or Ca2+. Chapter 3 describes an application of oligopeptides as catalysts for aldol reactions. Paragraph 3.1 concerns the use of prolinamides as catalysts of the cross aldol addition of hydroxyacetone to aromatic aldeydes, whereas paragraphs 3.2 and 3.3 are about the catalyzed aldol addition of acetone to isatins. By means of DFT and AIM calculations, the steric and stereoelectronic effects that control the enantioselectivity in the cross-aldol addition of acetone to isatin catalysed by L-proline have been studied, also in the presence of small quantities of water. In chapter 4 is reported the synthesis and the analysis of a new fiber-like material, obtained from the selfaggregation of the dipeptide Boc-L-Phe-D-Oxd-OBn, which spontaneously forms uniform fibers consisting of parallel infinite linear chains arising from singleintermolecular N-H···O=C hydrogen bonds. This is the absolute borderline case of a parallel β-sheet structure. Longer oligomers of the same series with general formula Boc-(L-Phe-D-Oxd)n-OBn (where n = 2-5), are described in chapter 5. Their properties in solution and in the solid state were analyzed, in correlation with their attitude to form intramolecular hydrogen bond. In chapter 6 is reported the synthesis of imidazolidin-2- one-4-carboxylate and (tetrahydro)-pyrimidin-2-one-5- carboxylate, via an efficient modification of the Hofmann rearrangement. The reaction affords the desired compounds from protected asparagine or glutamine in good to high yield, using PhI(OAc)2 as source of iodine(III).

Design and Characterization of New Luminescent Sensors and Labels

The aim of this Ph.D. project has been the design and characterization of new and more efficient luminescent tools, in particular sensors and labels, for analytical chemistry, medical diagnostics and imaging. Actually both the increasing temporal and spatial resolutions that are demanded by those branches, coupled to a sensitivity that is required to reach the single molecule resolution, can be provided by the wide range of techniques based on luminescence spectroscopy. As far as the development of new chemical sensors is concerned, as chemists we were interested in the preparation of new, efficient, sensing materials. In this context, we kept developing new molecular chemosensors, by exploiting the supramolecular approach, for different classes of analytes. In particular we studied a family of luminescent tetrapodal-hosts based on aminopyridinium units with pyrenyl groups for the detection of anions. These systems exhibited noticeable changes in the photophysical properties, depending on the nature of the anion; in particular, addition of chloride resulted in a conformational change, giving an initial increase in excimeric emission. A good selectivity for dicarboxylic acid was also found. In the search for higher sensitivities, we moved our attention also to systems able to perform amplification effects. In this context we described the metal ion binding properties of three photoactive poly-(arylene ethynylene) co-polymers with different complexing units and we highlighted, for one of them, a ten-fold amplification of the response in case of addition of Zn2+, Cu2+ and Hg2+ ions. In addition, we were able to demonstrate the formation of complexes with Yb3+ an Er3+ and an efficient sensitization of their typical metal centered NIR emission upon excitation of the polymer structure, this feature being of particular interest for their possible applications in optical imaging and in optical amplification for telecommunication purposes. An amplification effect was also observed during this research in silica nanoparticles derivatized with a suitable zinc probe. In this case we were able to prove, for the first time, that nanoparticles can work as “off-on” chemosensors with signal amplification. Fluorescent silica nanoparticles can be thus seen as innovative multicomponent systems in which the organization of photophysically active units gives rise to fruitful collective effects. These precious effects can be exploited for biological imaging, medical diagnostic and therapeutics, as evidenced also by some results reported in this thesis. In particular, the observed amplification effect has been obtained thanks to a suitable organization of molecular probe units onto the surface of the nanoparticles. In the effort of reaching a deeper inside in the mechanisms which lead to the final amplification effects, we also attempted to find a correlation between the synthetic route and the final organization of the active molecules in the silica network, and thus with those mutual interactions between one another which result in the emerging, collective behavior, responsible for the desired signal amplification. In this context, we firstly investigated the process of formation of silica nanoparticles doped with pyrene derivative and we showed that the dyes are not uniformly dispersed inside the silica matrix; thus, core-shell structures can be formed spontaneously in a one step synthesis. Moreover, as far as the design of new labels is concerned, we reported a new synthetic approach to obtain a class of robust, biocompatible silica core-shell nanoparticles able to show a long-term stability. Taking advantage of this new approach we also showed the synthesis and photophysical properties of core-shell NIR absorbing and emitting materials that proved to be very valuable for in-vivo imaging. In general, the dye doped silica nanoparticles prepared in the framework of this project can conjugate unique properties, such as a very high brightness, due to the possibility to include many fluorophores per nanoparticle, high stability, because of the shielding effect of the silica matrix, and, to date, no toxicity, with a simple and low-cost preparation. All these features make these nanostructures suitable to reach the low detection limits that are nowadays required for effective clinical and environmental applications, fulfilling in this way the initial expectations of this research project.

La Pace Calda. La nascita del movimento antinucleare negli Stati Uniti e in Gran Bretagna, 1957-1963

The aim of this proposal is to offer an alternative perspective on the study of Cold War, since insufficient attention is usually paid to those organizations that mobilized against the development and proliferation of nuclear weapons. The antinuclear movement began to mobilize between the 1950s and the 1960s, when it finally gained the attention of public opinion, and helped to build a sort of global conscience about nuclear bombs. This was due to the activism of a significant part of the international scientific community, which offered powerful intellectual and political legitimization to the struggle, and to the combined actions of the scientific and organized protests. This antinuclear conscience is something we usually tend to consider as a fait accompli in contemporary world, but the question is to show its roots, and the way it influenced statesmen and political choices during the period of nuclear confrontation of the early Cold War. To understand what this conscience could be and how it should be defined, we have to look at the very meaning of the nuclear weapons that has deeply modified the sense of war. Nuclear weapons seemed to be able to destroy human beings everywhere with no realistic forms of control of the damages they could set off, and they represented the last resource in the wide range of means of mass destruction. Even if we tend to consider this idea fully rational and incontrovertible, it was not immediately born with the birth of nuclear weapons themselves. Or, better, not everyone in the world did immediately share it. Due to the particular climate of Cold War confrontation, deeply influenced by the persistence of realistic paradigms in international relations, British and U.S. governments looked at nuclear weapons simply as «a bullet». From the Trinity Test to the signature of the Limited Test Ban Treaty in 1963, many things happened that helped to shift this view upon nuclear weapons. First of all, more than ten years of scientific protests provided a more concerned knowledge about consequences of nuclear tests and about the use of nuclear weapons. Many scientists devoted their social activities to inform public opinion and policy-makers about the real significance of the power of the atom and the related danger for human beings. Secondly, some public figures, as physicists, philosophers, biologists, chemists, and so on, appealed directly to the human community to «leave the folly and face reality», publicly sponsoring the antinuclear conscience. Then, several organizations leaded by political, religious or radical individuals gave to this protests a formal structure. The Campaign for Nuclear Disarmament in Great Britain, as well as the National Committee for a Sane Nuclear Policy in the U.S., represented the voice of the masses against the attempts of governments to present nuclear arsenals as a fundamental part of the international equilibrium. Therefore, the antinuclear conscience could be defined as an opposite feeling to the development and the use of nuclear weapons, able to create a political issue oriented to the influence of military and foreign policies. Only taking into consideration the strength of this pressure, it seems possible to understand not only the beginning of nuclear negotiations, but also the reasons that permitted Cold War to remain cold.

Functional photoactive and electroactive nanodevices

Most of current ultra-miniaturized devices are obtained by the top-down approach, in which nanoscale components are fabricated by cutting down larger precursors. Since this physical-engineering method is reaching its limits, especially for components below 30 nm in size, alternative strategies are necessary. Of particular appeal to chemists is the supramolecular bottom-up approach to nanotechnology, a methodology that utilizes the principles of molecular recognition to build materials and devices from molecular components. The subject of this thesis is the photophysical and electrochemical investigation of nanodevices obtained harnessing the principles of supramolecular chemistry. These systems operate in solution-based environments and are investigated at the ensemble level. The majority of the chemical systems discussed here are based on pseudorotaxanes and catenanes. Such supramolecular systems represent prototypes of molecular machines since they are capable of performing simple controlled mechanical movements. Their properties and operation are strictly related to the supramolecular interactions between molecular components (generally photoactive or electroactive molecules) and to the possibility of modulating such interactions by means of external stimuli. The main issues addressed throughout the thesis are: (i) the analysis of the factors that can affect the architecture and perturb the stability of supramolecular systems; (ii) the possibility of controlling the direction of supramolecular motions exploiting the molecular information content; (iii) the development of switchable supramolecular polymers starting from simple host-guest complexes; (iv) the capability of some molecular machines to process information at molecular level, thus behaving as logic devices; (v) the behaviour of molecular machine components in a biological-type environment; (vi) the study of chemically functionalized metal nanoparticles by second harmonic generation spectroscopy.

α-alchilazione di aldeidi, via organocatalisi: un approccio sintetico e computazionale

During this internship, the α-alkylation of branched aldehydes was taken into consideration. An enantiopure Betti’s base derivative was used as catalyst, applying a new concept in catalysis: organocatalysis. The Betti’s base may be of particular interest for organic chemists working in the field of “reactions catalysed by enantiopure small organic molecules”, in particular for the ones interested in enantiopure primary amines. The potential of secondary amines as catalysts has certainly been known for years. It is indeed more innovative to conduct reactions using primary amine derivatives as catalyst. In this work, the efficacy of the primary amine was checked first. Then, the focus was set on finding optimal reaction conditions. Finally, to have a more complete picture of the structure of the compounds used in the project, experimental and computational IR spectra were compared, after the method was validated. Durante il periodo di tirocinio è stata presa in esame la reazione di α-alchilazione di aldeidi branched, utilizzando un derivato dell’ammina di Betti come catalizzatore enantiopuro ed applicando un nuovo tipo di catalisi: l’organocatalisi. Questi composti possono essere di particolare interesse per lavori in chimica organica, nel campo delle reazioni catalizzate da “piccole” molecole organiche, in particolare da ammine primarie a chiralità definita; la potenzialità delle ammine secondarie chirali come catalizzatori è certamente nota da anni, ma innovativo è condurre il tutto con l’impiego di un derivato amminico primario. Altri aspetti significativi sono gli apparenti e innumerevoli vantaggi, dal punto di vista economico ed ambientale, oltre che operativo e sintetico, derivanti dal nuovo tipo di catalisi. In un primo momento è stata verificata l’efficacia dell’ammina primaria sintetizzata nella reazione in progetto, quindi sono state individuate le condizioni di reazione ottimali. Infine, per un’analisi più completa di alcune molecole organiche e dopo un’opportuna validazione del metodo utilizzato, sono stati ottenuti a livello computazionale gli spettri IR delle molecole di sintesi prodotto e catalizzatore.

Synthesis and surface modification of semiconductor nanocrystals

The last decade has witnessed an exponential growth of activities in the field of nanoscience and nanotechnology worldwide, driven both by the excitement of understanding new science and by the potential hope for applications and economic impacts. The largest activity in this field up to date has been in the synthesis and characterization of new materials consisting of particles with dimensions in the order of a few nanometers, so-called nanocrystalline materials. [1-8] Semiconductor nanomaterials such as III/V or II/VI compound semiconductors exhibit strong quantum confinement behavior in the size range from 1 to 10 nm. Therefore, preparation of high quality semiconductor nanocrystals has been a challenge for synthetic chemists, leading to the recent rapid progress in delivering a wide variety of semiconducting nanomaterials. Semiconductor nanocrystals, also called quantum dots, possess physical properties distinctly different from those of the bulk material. Typically, in the size range from 1 to 10 nm, when the particle size is changed, the band gap between the valence and the conduction band will change, too. In a simple approximation a particle in a box model has been used to describe the phenomenon[9]: at nanoscale dimensions the degenerate energy states of a semiconductor separate into discrete states and the system behaves like one big molecule. The size-dependent transformation of the energy levels of the particles is called “quantum size-effect”. Quantum confinement of both the electron and hole in all three dimensions leads to an increase in the effective bandgap of the material with decreasing crystallite size. Consequently, both the optical absorption and emission of semiconductor nanaocrystals shift to the blue (higher energies) as the size of the particles gets smaller. This color tuning is well documented for CdSe nanocrystals whose absorption and emission covers almost the whole visible spectral range. As particle sizes become smaller the ratio of surface atoms to those in the interior increases, which has a strong impact on particle properties, too. Prominent examples are the low melting point [8] and size/shape dependent pressure resistance [10] of semiconductor nanocrystals. Given the size dependence of particle properties, chemists and material scientists now have the unique opportunity to change the electronic and chemical properties of a material by simply controlling the particle size. In particular, CdSe nanocrystals have been widely investigated. Mainly due to their size-dependent optoelectronic properties [11, 12] and flexible chemical processibility [13], they have played a distinguished role for a number of seminal studies [11, 12, 14, 15]. Potential technical applications have been discussed, too. [8, 16-27] Improvement of the optoelectronic properties of semiconductor nanocrystals is still a prominent research topic. One of the most important approaches is fabricating composite type-I core-shell structures which exhibit improved properties, making them attractive from both a fundamental and a practical point of view. Overcoating of nanocrystallites with higher band gap inorganic materials has been shown to increase the photoluminescence quantum yields by eliminating surface nonradiative recombination sites. [28] Particles passivated with inorganic shells are more robust than nanocrystals covered by organic ligands only and have greater tolerance to processing conditions necessary for incorporation into solid state structures or for other applications. Some examples of core-shell nanocrystals reported earlier include CdS on CdSe [29], CdSe on CdS, [30], ZnS on CdS, [31] ZnS on CdSe[28, 32], ZnSe on CdSe [33] and CdS/HgS/CdS [34]. The characterization and preparation of a new core-shell structure, CdSe nanocrystals overcoated by different shells (CdS, ZnS), is presented in chapter 4. Type-I core-shell structures as mentioned above greatly improve the photoluminescence quantum yield and chemical and photochemical stability of nanocrystals. The emission wavelengths of type-I core/shell nanocrystals typically only shows a small red-shift when compared to the plain core nanocrystals. [30, 31, 35] In contrast to type-I core-shell nanocrystals, only few studies have been conducted on colloidal type-II core/shell structures [36-38] which are characterized by a staggered alignment of conduction and valence bands giving rise to a broad tunability of absorption and emission wavelengths, as was shown for CdTe/CdSe core-shell nanocrystals. [36] The emission of type-II core/shell nanocrystals mainly originates from the radiative recombination of electron-hole pairs across the core-shell interface leading to a long photoluminescence lifetime. Type-II core/shell nanocrystals are promising with respect to photoconduction or photovoltaic applications as has been discussed in the literature.[39] Novel type-II core-shell structures with ZnTe cores are reported in chapter 5. The recent progress in the shape control of semiconductor nanocrystals opens new fields of applications. For instance, rod shaped CdSe nanocrystals can enhance the photo-electro conversion efficiency of photovoltaic cells, [40, 41] and also allow for polarized emission in light emitting diodes. [42, 43] Shape control of anisotropic nanocrystals can be achieved by the use of surfactants, [44, 45] regular or inverse micelles as regulating agents, [46, 47] electrochemical processes, [48] template-assisted [49, 50] and solution-liquid-solution (SLS) growth mechnism. [51-53] Recently, formation of various CdSe nanocrystal shapes has been reported by the groups of Alivisatos [54] and Peng, [55] respectively. Furthermore, it has been reported by the group of Prasad [56] that noble metal nanoparticles can induce anisotropic growth of CdSe nanocrystals at lower temperatures than typically used in other methods for preparing anisotropic CdSe structures. Although several approaches for anisotropic crystal growth have been reported by now, developing new synthetic methods for the shape control of colloidal semiconductor nanocrystals remains an important goal. Accordingly, we have attempted to utilize a crystal phase control approach for the controllable synthesis of colloidal ZnE/CdSe (E = S, Se, Te) heterostructures in a variety of morphologies. The complex heterostructures obtained are presented in chapter 6. The unique optical properties of nanocrystals make them appealing as in vivo and in vitro fluorophores in a variety of biological and chemical investigations, in which traditional fluorescence labels based on organic molecules fall short of providing long-term stability and simultaneous detection of multiple emission colours [References]. The ability to prepare water soluble nanocrystals with high stability and quantum yield has led to promising applications in cellular labeling, [57, 58] deep-tissue imaging, [59, 60] and assay labeling [61, 62]. Furthermore, appropriately solubilized nanocrystals have been used as donors in fluorescence resonance energy transfer (FRET) couples. [63-65] Despite recent progress, much work still needs to be done to achieve reproducible and robust surface functionalization and develop flexible (bio-) conjugation techniques. Based on multi-shell CdSe nanocrystals, several new solubilization and ligand exchange protocols have been developed which are presented in chapter 7. The organization of this thesis is as follows: A short overview describing synthesis and properties of CdSe nanocrystals is given in chapter 2. Chapter 3 is the experimental part providing some background information about the optical and analytical methods used in this thesis. The following chapters report the results of this work: synthesis and characterization of type-I multi-shell and type-II core/shell nanocrystals are described in chapter 4 and chapter 5, respectively. In chapter 6, a high–yield synthesis of various CdSe architectures by crystal phase control is reported. Experiments about surface modification of nanocrystals are described in chapter 7. At last, a short summary of the results is given in chapter 8.

Advanced spectroscopic techniques and chemometric analysis for atmospheric organic aerosol characterization and source apportionment

Atmospheric aerosol particles directly impact air quality and participate in controlling the climate system. Organic Aerosol (OA) in general accounts for a large fraction (10–90%) of the global submicron (PM1) particulate mass. Chemometric methods for source identification are used in many disciplines, but methods relying on the analysis of NMR datasets are rarely used in atmospheric sciences. This thesis provides an original application of NMR-based chemometric methods to atmospheric OA source apportionment. The method was tested on chemical composition databases obtained from samples collected at different environments in Europe, hence exploring the impact of a great diversity of natural and anthropogenic sources. We focused on sources of water-soluble OA (WSOA), for which NMR analysis provides substantial advantages compared to alternative methods. Different factor analysis techniques are applied independently to NMR datasets from nine field campaigns of the project EUCAARI and allowed the identification of recurrent source contributions to WSOA in European background troposphere: 1) Marine SOA; 2) Aliphatic amines from ground sources (agricultural activities, etc.); 3) Biomass burning POA; 4) Biogenic SOA from terpene oxidation; 5) “Aged” SOAs, including humic-like substances (HULIS); 6) Other factors possibly including contributions from Primary Biological Aerosol Particles, and products of cooking activities. Biomass burning POA accounted for more than 50% of WSOC in winter months. Aged SOA associated with HULIS was predominant (> 75%) during the spring-summer, suggesting that secondary sources and transboundary transport become more important in spring and summer. Complex aerosol measurements carried out, involving several foreign research groups, provided the opportunity to compare source apportionment results obtained by NMR analysis with those provided by more widespread Aerodyne aerosol mass spectrometers (AMS) techniques that now provided categorization schemes of OA which are becoming a standard for atmospheric chemists. Results emerging from this thesis partly confirm AMS classification and partly challenge it.