1000 resultados para Casca-Preta
Resumo:
Green coconut shells were treated with acid, base and hydrogen peroxide solutions for 3, 6, 12 and 24 h for removing toxic metals from synthetic wastewater. The removal of ions by the adsorbent treated with 0.1 mol L-1 NaOH/ 3h was 99.5% for Pb2+ and 97.9% for Cu2+. The removal of Cd2+, Ni2+, Zn2+, using adsorbent treated with 1.0 mol L-1 NaOH/3 h, was 98.5, 90.3 and 95.4%, respectively. Particle size, adsorbent concentration and adsorption kinetics were also studied. An adsorbent size of 60-99 mesh and a concentration of 30-40 g/L for 5 min exposure were satisfactory for maximum uptake of Pb2+, Ni2+, Cd2+, Zn2+ and Cu2+ and can be considered as promising parameters for treatment the aqueous effluents contaminated with toxic metals.
Resumo:
This work consists in a study about the chemical activation of charred rice hulls using NaOH as the activation agent. The influence of the naturally-occurring silica was particularly evidenced. X-ray diffraction patterns showed the formation of sodium carbonate and silicates in the activated samples, whereas thermogravimetric curves revealed a strong reduction in the ash content of these samples after washing with water. Nitrogen adsorption data indicated a microporosity development only in the washed samples, with BET surface area values of 450 and 1380 m²/g achieved for the samples activated at 800 °C starting from the precursor with or without silica, respectively.
Resumo:
The rice husk combustion in a bubbling and atmospheric fluidized bed reactor was investigated. This paper presents the rice husk ash characterization employing the techniques of X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy (SEM) among others. After combustion, a rice husk ash containing 93% amorphous silica and <3% unburned char was produced. Methods usually applied to fixed bed considering external sources of energy and high reaction times were employed. Thus, the potential of this type of reactors with respect to speed, continuity and self-sufficiency energy of the process was shown.
Resumo:
The removal study was conducted using 1.00 g of the rice husk ash (RHA) and 20.0 mL solution with concentrations in the range of 10-1000 mg/L of Zn(II). The influence of contact time, initial metal concentration, agitation and pH of the removal process was investigated. Superior removals to 95% were obtained at the end of 24 h of contact. The agitation increased in 20% the removal of Zn(II), being needed only 5 min to reach the equilibrium. The adsorption process was studied by the models of isotherms of Langmuir, Freundlich and BET, obtaining results of R L and 1/n for a process favorable of adsorption. BET isotherm best represents the equilibrium adsorption. The results showed that the RHA has the largest capacity and affinity for the removal of Zn(II).
Resumo:
The potential use of rice husk as biosorbent to remove Cu2+, Al3+, Ni2+ and Zn2+ ions from aqueous solutions was investigated under both noncompetitive and competitive conditions. The biosorbent was used in the form of particles with size smaller than 0.5 μm and in the concentration of 500 mg L-1 (dry weight). The experiments were performed using batch adsorption technique for concentrations of 10, 30 and 70 mg L-1 of metal ions at pH 4.0 and 5.0. The chemical speciation of metals in the experimental conditions used in this work was predicted by the software Visual MINTEQ 2.6.
Resumo:
Rubus fruticosus (Rosaceae), popularly known as Blackberry, is a highly nutritious fruit, rich in bioactive compounds. Their stability during processing has been the focus of several studies. This work describes the evaluation of the stability of the main phytochemicals of pulp from blackberry cv. Tupy, stored under different temperature conditions for six months. The storage at -10 °C was not sufficient to cause significant changes in total phenolics content, anthocyanins content and antioxidant capacity during two months of storage. Likewise, at -18 °C, total phenolics content and antioxidant capacity were kept for four months, but total anthocyanins and β-carotene content were kept for two and six months of storage, respectively.
Resumo:
Silica obtained from rice husk after acid leaching and calcination was compared to commercial silica as a catalyst support. CaO and SnO2 catalysts were prepared by impregnation and tested in the transesterification of soybean oil and the esterification of oleic acid. CaO catalysts showed basic character and were the most active for transesterification, whereas SnO2 catalysts were acid and the most effective for esterification. In both cases the performances of the catalysts prepared with rice husk ash and commercial silica were similar. These results demonstrate that rice husk is a cost-effective and environmentally-friendly source of silica that can be used as a catalyst support.
Resumo:
This article describes an experiment that involves the extraction and separation of the pigments of spinach extract by column chromatography using the silica obtained from rice husk ash as a stationary phase. The experimental procedure is very simple to apply in the chemistry laboratory, and allowed to illustrate some concepts of organic chemistry: structure of organic molecules, solubility, polarity, extraction, partition coefficient, adsorption and retention factor (Rf), as well as objectives and fundamentals of chromatographic methods. The experiment can be carried out in a 4 h period.
Resumo:
The preparation of oat-reinforced polypropylene nanocomposites with different fiber contents by means of melt-processing was investigated. Composite properties were evaluated by Scanning Electron Microscopy (SEM), Flexural Modulus, Dynamic Mechanical Analysis (DMA), Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). Findings confirmed that the oat composite properties were affected by fiber type and content. Improvements in mechanical properties were obtained using fiber contents < 20% w.t.
Resumo:
In this work, an experimental design was used to analyze the influence of process parameters on the production of extracellular enzymes such as β-glucosidase and peroxidase, and their possible effect on the obtention of soluble and nanostructured silica from rice husk ash by the action of the fungus Fusarium oxysporum. Specifically, pH, fermentation time and glucose concentration in the culture medium were varied. Statistical analysis indicated that the silica synthesis in the aqueous medium was strongly dependent on pH and time. Although the glucose concentration does not exert a direct influence on the biosynthesis of silica, it is an important parameter in the production of extracellular enzymes. To prevent enzyme inhibition and provide higher dissolution of silica, it is recommended to work at a pH close to neutral with a glucose concentration of 3 g L-1 for at least 144 h.
Resumo:
Rice husk ash (RHA) is used as a silica source for several purposes, among them to obtain metal catalysts, as was done in this work. The catalysts were characterized by chemisorption, physisorption, thermal analyses (TG, DSC), X-ray diffraction, X-ray fluorescence, temperature-programmed reduction and scanning electron microscopy. The catalysts synthesized with different Ni loadings supported on RHA were applied to the reaction of dry reforming of methane. The reaction was tested at three temperatures of catalytic reduction (500, 600 and 700 ºC). All synthesized catalysts were active for the studied reaction, with different H2/CO ratios achieved according to degree of metallic dispersion.
Resumo:
The global energy scenario is currently a widely discussed topic, with growing concern about the future supplies. Thus, much attention has been dedicated to the utilization of biomass as an energy resource. In this respect, orange peel has become a material of great interest, especially to Brazil, which generates around 9.5 million tons of this waste per year. To this end, the authors studied the kinetics of the thermal processing of dried orange peel in inert and oxidizing atmosphere. The thermodynamic parameters were determined by the Ozawa-Flynn-Wall method for the global process observed during heating from the 25°C up to 800°C. The thermal analysis in air and nitrogen showed 3-2 stages of mass loss, respectively, with approximately 20% residual mass under a nitrogen atmosphere. The increase in the values of activation energy for the conversion points between 20% and 60% for thermal effects in air and nitrogen atmosphere was observed. The activation energy obtained in an oxidizing atmosphere was higher than that obtained under a nitrogen atmosphere. The fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that the material has a high level of complexity with the presence of alkali and alkaline earth groups as well as phosphate, plus substances such as pectin, cellulose and lignin.
Resumo:
Visando avaliar a eficiência de quatro fungicidas no controle monitorado da mancha preta (Cercosporidium personatum) e verrugose (Sphaceloma arachidis) do amendoim (Arachis hypogaea), cv.'Tatu', foram conduzidos quatro ensaios em Ribeirão Preto e Pindorama, SP (1996 e 1997. Os tratamentos foram: testemunha, sem controle químico; controle convencional, com quatro pulverizações de clorotalonil, a cada l4 dias, iniciando entre 41 e 43 dias do plantio; e controle monitorado, com clorotalonil e os triazóis tebuconazole, difenoconazole e propiconazole, nas doses recomendadas pelos fabricantes para a cultura. No controle monitorado a primeira pulverização foi realizada quando a incidência da mancha preta foi de 5 a 15% e as demais, com o intervalo mínimo de 14 dias entre as aplicações, após três dias, seguidos ou não, com ocorrências de precipitações pluviais superiores a 2,5 mm, durante períodos de sete dias. A intensidade da mancha preta (área sob a curva de progresso da doença) foi obtida por avaliações semanais com escalas diagramáticas de índice de área foliar infetada, durante o ciclo da cultura. A severidade da verrugose foi avaliada aos 84-92 dias do plantio, com escala específica de notas de um a quatro, em função dos sintomas exibidos nas hastes e pecíolos. No controle monitorado houve redução de uma a três pulverizações e os triazóis foram mais eficientes que o clorotalonil, resultando em rendimentos próximos aos do tratamento com quatro pulverizações fixas. O tebuconazole propiciou maior redução na intensidade da mancha preta, enquanto que o difenoconazole destacou-se pela eficiência no controle da verrugose.
Resumo:
O presente trabalho teve como objetivo avaliar sob condições de laboratório, o efeito de temperatura (15, 18, 20, 21, 24, 25, 27, 30, 33 e 35 ± 1 ºC) nas condições escuro, luz contínua e fotoperíodo 12/12 h, na produção de pseudotécios de isolados de Guignardia citricarpa, provenientes de regiões cítricolas dos Estados de São Paulo e Rio de Janeiro. Discos de folhas de limoeiro 'Cravo' (Citrus limonia), de 12 mm de diâmetro, foram autoclavados e depositadas (parte abaxial) na superfície do meio de cultura constituído por ágar-água 2%. Foram colocados quatro discos de folhas por placa onde, de forma conjunta e intercalar aos mesmos, depositaram-se dois discos obtidos de colônias de Phyllosticta citricarpa, com 21 dias de incubação. Foi, também, estudado o efeito da temperatura e do tempo de incubação (2, 8 e 16 h) na germinação dos ascósporos. Após 21 dias de incubação, a ótima temperatura ajustada pela função beta generalizada, para produção de pseudotécios deu-se a 26 e 22,5 a 27,5 °C, sob condição de escuro e de luz, respectivamente. Observou-se também produção de pseudotécios a 27 ºC em fotoperíodo 12/12 h. Em estudo complementar foi verificado que, aos 19 dias, a 27 ºC, cerca de 90% dos pseudotécios haviam alcançado a maturidade, com abundante produção de ascósporos. A maior porcentagem de ascósporos germinados foi constatada na temperatura de 24 ºC, após 16 h de incubação. Dentre as vantagens alcançadas, incluem-se a possibilidade (i) da produção massal de ascósporos em curto período de tempo, e (ii) da padronização do inóculo, tanto qualitativa, quanto quantitativa.
Resumo:
Uma escala diagramática, abrangendo os dois tipos prevalentes de sintomas de mancha preta em frutos cítricos (Citrus spp.), os de mancha dura e de falsa melanose, foi desenvolvida para padronizar a avaliação da severidade da doença. A escala foi elaborada considerando os limites máximos e mínimos de severidade da doença observados no campo. Os valores intermediários seguiram incrementos logarítmicos para os sintomas do tipo mancha dura (0,5; 1,7; 5,0; 11,5; 22,5 e 49,0%) e do tipo falsa melanose (1,1; 4,5; 15,0; 31,0; 53,0 e 68,0%). Para a validação da escala, seis avaliadores quantificaram a severidade da doença a partir das imagens digitalizadas de 50 frutos com diferentes níveis de doença. Inicialmente, a estimativa da severidade foi feita sem auxílio da escala. Em seguida, os mesmos avaliadores, utilizando a escala diagramática proposta, estimaram a severidade nos mesmos frutos avaliados anteriormente. As avaliações com a escala diagramática foram mais precisas e acuradas nas estimativas de todos os avaliadores e proporcionaram maior reprodutibilidade entre avaliações de diferentes avaliadores. A escala diagramática proposta foi considerada adequada para estimar a severidade da mancha preta nos frutos e será usada em estudos epidemiológicos e de avaliação de estratégias de controle desta doença.