Antenna Design for Contactless IC Card Applications

Contactless integrated circuit cards are one form of application of radio frequency identification. They are used in applications such as access control, identification, and payment in public transport. The contactless IC cards are passive which means that both the data and the energy are transferred to the card without contact using inductive coupling. Antenna design and optimization of the design for contactless IC cards defined by ISO/IEC14443 is studied. The basic operation principles of contactless system are presented and the structure of contactless IC card is illustrated. The structure was divided between the contactless chip and the antenna. The operation of the antenna was covered in depth and the parameters affecting to the performance of the antenna were presented. Also the different antenna technologies and connection technologies were provided. The antenna design process with the parameters and the design tools isillustrated and optimization of the design is studied. To make the design process more ideal a target of development was discovered, which was the implementation of test application. The optimization of the antenna design was presented based on the optimization criteria defined in this study. The solution for the implementation of these criteria and the effect of each criterion was found. For enhancing the performance of the antenna a focus for future study was proposed.

Field-Programmable Gate Array Card for Readout and Control of Cryoelectronics

The main goal of the present Master’s Thesis project was to create a field-programmable gate array (FPGA) based system for the control of single-electron transistors or other cryoelectronic devices. The FPGA and similar technologies are studied in the present work. The fixed and programmable logic are compared with each other. The main features and limitations of the hardware used in the project are investigated. The hardware and software connections of the device to the computer are shown in detail. The software development techniques for FPGA-based design are described. The steps of design for programmable logic are considered. Furthermore, the results of filters implemented in the software are illustrated.

Derby Day race card for british charities i Finland

14 x 21 cm

Effects of mineral sorting on concentrator design and economics

Ore sorting after crushing is an effective way to enhance the feed quality of a concentrator. Sorting by hand is the oldest way of concentrating minerals but it has become outdated because of low capacities. Older methods of sorting have also been difficult to use in large scale productions due to low capacities of sorters. Data transfer and processing and the speed of rejection mechanisms have been the bottlenecks for effective use of sorters. A fictive chalcopyrite ore body was created for this thesis. The properties of the ore were typical of chalcopyrite ores and economical limit was set for design. Concentrator capacity was determined by the size of ore body and the planned mine life. Two concentrator scenarios were compared, one with the sorting facility and the other without sorting. Comparison was made for quality and amount of feed, size of equipment and economics. Concentrator with sorting had lower investment and operational cost but also lower incomes due to the ore loss in sorting. Net cash flow, net present value and internal rate of interest were calculated for comparison of the two scenarios.

Brazil nut sorting for aflatoxin prevention: a comparison between automatic and manual shelling methods

The impact of automatic and manual shelling methods during manual/visual sorting of different batches of Brazil nuts from the 2010 and 2011 harvests was evaluated in order to investigate aflatoxin prevention.The samples were tested as follows: in-shell, shell, shelled, and pieces in order to evaluate the moisture content (mc), water activity (Aw), and total aflatoxin (LOD = 0.3 µg/kg and LOQ 0.85 µg/kg) at the Brazil nut processing plant. The results of aflatoxins obtained for the manually shelled nut samples ranged from 3.0 to 60.3 µg/g and from 2.0 to 31.0 µg/g for the automatically shelled samples. All samples showed levels of mc below the limit of 15%; on the other hand, shelled samples from both harvests showed levels of Aw above the limit. There were no significant differences concerning the manual or automatic shelling results during the sorting stages. On the other hand, the visual sorting was effective in decreasing the aflatoxin contamination in both methods.

Use of chlrophyll fluorescence sorting to improve soybean seed quality

The occurrence of green seeded soybeans [Glycine max (L.) Merrill] is a problem closely related to unfavorable climatic conditions, mainly drought, that occurs during the final stages of seed maturation. This problem causes serious losses to soybean seed quality in Brazil. In these seeds, chlorophyll is not properly degraded during maturation, drastically reducing seed quality. Using the chlorophyll fluorescence technique, it is possible to remove green seeds from the seed lot, improving seed quality in several species in which the occurrence of green seeds is also a problem. The objective of this research was to study the use of the chlorophyll fluorescence technique in sorting green seeds from soybean seed samples and its effects on quality. Five seed samples of soybean, cultivar TMG 113 RR, with 0%, 5%, 10%, 15%, and 20% of green seeds were used in this study. Seeds from each sample were sorted into two fractions based on the chlorophyll fluorescence signals and then compared to the control (non-sorted seeds). The sorting process showed great differences between the low and high chlorophyll fluorescence fractions. It was concluded that: green seeds of soybeans present high chlorophyll fluorescence and that this characteristic affects the quality of the seeds; it is possible to improve the quality of soybean seed by removing green seeds using the chlorophyll fluorescence sorting technique.

Advis d'Angleterre, envoyé en France par les Communes de Londres, au Card. Mazarin, Luy representant l'Histoire de Gaverston, Favory d'un de leurs Roys, & les malheurs qui luy sont arrivez, sur le mesme sujet d'une guerre qu'il exerce aujourd'huy.

[Mazarinade. 1652]

Procedimiento tarjeta de crédito Master Card

Dirección de Canales / Operaciones

La tarjeta inteligente e-card

Gestión del conocimiento

Cabinet Card by C. Arthur, Photographer, St. Catharines [n.d.]

An unidentified young woman is featured in this black and white cabinet card by photographer C. Arthur, of St. Catharines, Ontario. The address of Mr. Arthur's studio is printed along the bottom of the photograph. This photograph was among the family memorabilia owned by Iris Sloman Bell of St. Catharines. The Sloman - Bell families include relatives who were former African American slaves who settled in Canada.Charles A. Arthur is listed as a photographer in St. Catharines from 1880 - 1883 and Charles P. Arthur (possibly a son?) was a photographer in the same city in 1898. Source: Phillips, Glen C. The Ontario photographers list (1851-1900). Sarnia: Iron Gate Publishing Co., 1990.

Cabinet Card of African Canadian by Photographer W. J. Rea, of Windsor [n.d.]

An unidentified African Canadian man is featured in this cabinet card by W. J. Rea, photographer, of Windsor, Ontario. The man appears to be in official dress, possibly of a religious or legal nature. This cabinet card bears the stamp of the photographer, W. J. Rea, in black ink along the bottom of the card and on the reverse. While it is undated, it is likely from the 1870s or 1880s. This cabinet card was in the possession of Iris Sloman Bell, of St. Catharines, Ontario. The Sloman - Bell family descendants include African American slaves from the United States who settled in Canada."Cabinet card photographs were first introduced in 1866. They were initially employed for landscapes rather than portraitures. Cabinet cards replaced Carte de visite photographs as the popular mode of photography. Cabinet cards became the standard for photographic portraits in 1870. Cabinet cards experienced their peak in popularity in the 1880's. Cabinet cards were still being produced in the United States until the early 1900's and continued to be produced in Europe even longer. The best way to describe a cabinet card is that it is a thin photograph that is mounted on a card that measures 4 1/4″ by 6 1/2″. Cabinet cards frequently have artistic logos and information on the bottom or the reverse of the card which advertised the photographer or the photography studio's services." Source: http://cabinetcardgallery.wordpress.com/category/cabinet-card-history/