EVALUATION OF METAL TOXICITY BY A MODIFIED METHOD BASED ON THE FUNGUS GERRONEMA VIRIDILUCENS BIOLUMINESCENCE IN AGAR MEDIUM

Metal cation toxicity to basidiomycete fungi is poorly understood, despite its well-known importance in terrestrial ecosystems. Moreover, there is no reported methodology for the routine evaluation of metal toxicity to basidiomycetes. In the present study, we describe the development of a procedure to assess the acute toxicity of metal cations (Na(+), K(+), Li(+), Ca(2+), Mg(2+), Co(2+), Zn(2+), Ni(2+), Mn(2+), Cd(2+), and Cu(2+)) to the bioluminescent basidiomycete fungus Gerronema viridilucens. The method is based on the decrease in the intensity of bioluminescence resulting from injuries sustained by the fungus mycelium exposed to either essential or nonessential metal toxicants. The assay described herein enables LIS to propose a metal toxicity series to Gerronenia viridilucens based on data obtained from the bioluminescence intensity (median effective concentration [EC50] values) versus metal concentration: Cd(2+) > Cu(2+) > Mn(2+) approximate to Ni(2+) approximate to Co(2+) > Zn(2+) > Mg(2+) > Li(+) > K(+) approximate to Na(+) > Ca(2+), and to shed some li-ht on the mechanism of toxic action of metal cations to basidiomycete fungi. Environ. Toxicol. Chem. 2010;29:320-326. (C) 2009 SETAC

Synthesis, spectroscopic characterization and radiosensitizing properties of acetato-bridged copper(II) complexes with 5-nitroimidazole drugs

Three novel acetato-bridged dinuclear copper(II) complexes with 5-nitroimidazoles (CuAcNtrim) and the known copper-acetato-metronidazole have been prepared by an environment-friendly route and spectroscopically characterized. The CuAcNtrim compounds of formula [Cu(2)(mu-O(2)CCH(3))(4)Ntrim(2)], where Ntrim = metronidazole (1), secnidazole (2), tinidazole (3) or nimorazole (4), exhibit dimeric copper-acetato paddle-wheel structures with Ntrim axial ligands coordinated to copper(II) ions through the N(3) atoms of the imidazole rings. EPR data indicate antiferromagnetic behavior for this novel series of copper complexes. The constant coupling has been found to decrease along with the increasing of basicity of the Ntrim axial ligand. The CuAcNtrim complexes and the correspondent Ntrim parent drugs have shown radiosensitizer properties for Hep2 (human larynx cancer) cell line in vitro. The best enhancement of radiosensitizer activity upon coordination of the Ntrim drug to copper(II) has been found for the nimorazole compound which has the strongest Cu-Ntrim bond and exhibits the highest lipophilicity within the series of CuAcNtrim complexes. (C) 2010 Elsevier B.V. All rights reserved.

Trace-metal biogeochemistry in the Mediterranean Thau Lagoon, a shellfish farming area

The present study contributes to the knowledge of the biogeochemistry of Pb, Cd, Cu, and Ni in the Mediterranean Than Lagoon, southern France, which is an important shellfish farming system. The concentrations of the metals were determined in sediment cores and the overlying waters using inductively coupled plasma mass spectrometry. Particular attention was given to the determination of dissolved Cu species because of their dual role as essential nutrient and toxicant to planktonic organisms. Dissolved Cu speciation was determined using the diffusive gradient in thin-film technique (DGT) and competitive ligand exchange-adsorptive cathodic stripping voltammetry (CLE-ACSV). Our data indicated a significant historical contamination of the sediments, which commenced in the second half of the 19th century, with trace metal inputs persisting until the end of the 20th century. In recent years a decrease in metal contamination has become apparent. The maxima observed for Pb, Cd, and Cu profiles probably indicate the occurence of anoxia crises. A strong complexation of the dissolved Cu species was observed in the waters of the Than Lagoon, which reduced the bioavailability of Cu. The dissolved Cu(2+) concentrations were probably too low to cause direct toxic effects on shellfish, but the highest concentration (5.29 pM) observed in this study can potentially influence phytoplankton communities. A comparison between the Cu speciation data indicates that up to 50% of the complexed Cu determined using CLE-ACSV was DGT labile.

Influência de bolhas de hélio e da microestrutura sobre a evolução térmica de filmes de alumínio implantados com cobre

Este trabalho apresenta os resultados de um estudo sistemático sobre as influências do tamanho de grão de filmes finos de Al e da implantação de íons de He sobre a evolução térmica de distribuições de átomos de Cu e formação de precipitados de Al-Cu. Filmes finos de Al depositados sobre substrato de SiO2/Si através de dois processos diferentes foram implantados com íons de Cu+ e He+ produzindo uma solução sólida supersaturada de Al-Cu (≈ 2,5 a 3,5 at. %) e nano-bolhas de He. Os valores de energia dos íons foram escolhidos de tal forma a produzirem uma camada rica em Cu e He na região a aproximadamente 100nm da superfície. Tais filmes foram tratados termicamente em alto-vácuo nas temperaturas de 200ºC e 280ºC por tempos de 0,5h e 2h. Os filmes foram analisados por Retroespalhamento Rutherford, para determinação do perfil de concentração dos átomos de Cu, e por Microscopia Eletrônica de Transmissão, para determinação da microestrutura do Al e dos sistemas de nano-partículas Al-Cu e Al-He. Os resultados experimentais mostraram que a evolução térmica da distribuição dos átomos de Cu e a formação de precipitados de Al-Cu são significativamente afetadas pela configuração e tamanho de grão do filme de Al e pelas implantações de He. O presente estudo mostrou que existe uma forte correlação entre o fluxo de vacâncias e a estabilidade da microestrutura de filmes finos de Al (Al/SiO2/Si) implantados com íons de Cu+ e He+ e tratados termicamente. A possibilidade de controlar os fluxos de vacâncias através de configurações da microestrutura dos filmes de Al é, portanto, um tema de grande interesse tecnológico relacionado a durabilidade das interconexões metálicas de dispositivos microeletrônicos.

Janela com noite ao fundo

Ilustração componente do jogo “Escola Mágica (http://www.loa.sead.ufscar.br/escola-magica.html)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Efeitos do período e volume de aplicação na segurança dos tratoristas aplicando herbicidas na cultura de cana-de-açúcar (Saccharum spp.)

O objetivo deste trabalho foi avaliar os efeitos do período e volume de aplicação na segurança da atividade de tratoristas aplicando herbicidas na cultura de cana-de-açúcar com o pulverizador de barra montado em trator e a eficiência de equipamentos de proteção individual (EPIs) e de uma cabina acoplada ao trator. As exposições dérmicas de 13 condições de trabalho foram avaliadas e analisadas estatisticamente por meio do delineamento inteiramente ao acaso e do esquema fatorial 3 x 2 x 2 + 1. O fator A foi a condição de exposição: 1) exposição dérmica potencial (EDP) - sem nenhuma medida de segurança; 2) exposição com cabina no trator (Cabina); e 3) exposição com as vestimentas (EPI). O fator B foi o volume de aplicação: 1) 200 L ha-1 e 2) 100 L ha-1; e o fator C foi o período de aplicação: 1) diurno e 2) noturno. Como testemunha foi avaliada a EDP do tratorista aplicando na atividade usual de 300 L de calda ha-1, no período diurno. As exposições dérmicas (EDs) aos herbicidas considerados nessas condições de trabalho foram estimadas por meio de dados substitutos das EDs avaliadas ao cátion Cu+2 adicionado como traçador nas caldas aplicadas. O pulverizador utilizado foi do modelo PJ 600, com barra de 12 m de comprimento e 24 bicos de jato plano TT 110 04 ou TT 110 02. As 13 condições de trabalho avaliadas foram classificadas como seguras (MS>1) para o tratorista aplicando os herbicidas glyphosate (48% i.a.), MSMA (48%), diuron (46,8%) + hexazinone (13,2%), clomazone (50%), sulfentrazone (50%), ametryne (50%), diuron (50%), isoxaflutole (75%), metribuzin (48%), 2,4-D (80,6%), ametryne (30%) + clomazone (20%), ametryne (73,25%) + trifloxysulfuron (1,85%) e tebuthiuron (80 %) e inseguras para o herbicida atrazine (50%), nos dois períodos e nos três volumes de aplicação, e ametryne (50%), na aplicação diurna e 100 L de calda ha-1. As aplicações noturnas e os volumes de aplicação reduzidos tornaram as condições de trabalho mais seguras, exceto para o atrazine. A eficiência dos EPIs para a aplicação de 300 L ha-1 variou de 69,5 a 89,3%, e a da cabina do trator variou entre 76,4 e 83,3%, em relação aos volumes reduzidos de 100 e 200 L ha-1.

Extração e exportação de nutrientes em cultivares de batata: II - micronutrientes

Cultivares de batata mais produtivas possivelmente exigem maior quantidade de micronutrientes, porém no Brasil há carência de informações sobre extração e exportação de micronutrientes pelas principais cultivares de batata utilizadas. O objetivo deste trabalho foi avaliar a produtividade de tubérculos, a extração e a exportação de micronutrientes nas cultivares de batata Ágata, Asterix, Atlantic, Markies e Mondial. O experimento foi conduzido durante a safra de inverno, em um Latossolo Vermelho, no município de Itaí (SP). As parcelas foram constituídas pelas cinco cultivares, e as subparcelas, por épocas de coletas, realizadas no momento do plantio e a cada sete dias após a emergência. As cultivares Mondial e Asterix, mais produtivas, apresentaram maior extração de micronutrientes, com quantidades médias por hectare de 71 g de B, 122 g de Cu, 2.228 g de Fe, 618 g de Mn e 405 g de Zn. As menores quantidades extraídas foram observadas na cultivar Atlantic, com valores de 50, 81, 1.960, 544 e 270 g ha-1 de B, Cu, Fe, Mn e Zn, respectivamente. A fase de maior demanda por B ocorre logo após o início da formação de tubérculos, aos 34 DAP, enquanto a maior demanda por Fe e Mn inicia-se a partir dos 42 DAP e vai até 63 DAP. O Cu e o Zn são absorvidos em maiores proporções a partir dos 64 DAP até o final do ciclo. A quantidade de B, Cu, Mn e Zn exportada foi dependente da cultivar, com valores por hectare variando de 48 a 22 g de B, 79 a 16 g de Cu, 65 a 37 g de Mn e 167 a 83 g de Zn. A quantidade de Fe exportada não variou entre as cultivares, sendo, em média, de 243 g ha-1. A quantidade de micronutrientes extraída e exportada pela batateira variou com as cultivares utilizadas, indicando necessidade de manejo diferencial da adubação.

Remoção do cobre de efluente galvânico aplicando tensoativos derivado de óleos vegetais

Copper is one of the most used metals in platingprocesses of galvanic industries. The presence of copper, a heavy metal, in galvanic effluents is harmful to the environment.The main objective of this researchwas the removal ofcopperfromgalvanic effluents, using for this purpose anionic surfactants. The removal process is based on the interaction between the polar head group of the anionic surfactant and the divalent copper in solution. The surfactants used in this study were derived from soybean oil (OSS), coconut oil (OCS), and sunflower oil (OGS). It was used a copper synthetic solution (280 ppm Cu+2) simulating the rinse water from a copper acid bath of a galvanic industry. It were developed 23and 32 factorial designs to evaluate the parameters that have influence in theremoval process. For each surfactant (OSS, OCS, and OGS), the independent variables evaluated were: surfactant concentration (1.25 to 3.75 g/L), pH (5 to 9) and the presence of an anionic polymer (0 to 0.0125 g/L).From the results obtained in the 23 factorial design and in the calculus for estimatingthe stoichiometric relationship between surfactants and copper in solution, it were developed new experimental tests, varying surfactant concentration in the range of 1.25 to 6.8 g/L (32 factorial design).The results obtained in the experimental designs were subjected to statistical evaluations to obtain Pareto charts and mathematical modelsfor Copper removal efficiency (%). The statistical evaluation of the 23 and 32factorial designs, using saponifiedcoconut oil (OCS), presented the mathematical model that best described the copper removal process.It can be concluded that OCS was the most efficient anionic surfactant, removing 100% of the copper present in the synthetic galvanic solution

Impactos do estresse salino e da cobertura morta nas características químicas do solo e no desenvolvimento do amaranto

Availability of good quality water has been reduced vertiginously, over the last decade, in the world. In some regions, the water resources have high concentration of the dissolved salts, these characteristics of the water make it s use impossible. Water quality can be a limitation for irrigated agriculture, principally in regions of arid or semiarid climate where the water resources are generally saline and are exposed at high evaporation ratio. For that reason, precipitation of the salts occurs near the soil surface and those salts themselves cumulate in the vegetal tissue, reducing the soil fertility and crop production. The adoption of tolerant crop to the water salinity and soil salinity, adaptable to the climatic conditions is other emergent necessity. This work had the goal of studying the effects of four salinity levels of the irrigation water salinity and use of mulch, dried leaves of Forest mangrove (Acacia mangiumWilld), in cultivated soil with amaranth (Amaranthus cruentus, BRS Alegria variety), in greenhouse. It was utilized the transplant of plants to PVC columns, containing 30 kg of silty loam soil, 10 days after emerging, with space of 50 x 50 cm between lines. Treatments were composed by combination of four levels of salinity (0.147; 1.500; 3.000 e 4.500 dS m-1), obtained by addition NaCl (commercial) to irrigation water and soil with and without protection, by mulch. A factorial system 4 x 2 was used with four repetitions, totalizing 32 parcels. The concentrations of nutrients in soil solution have been evaluated, in the dry matter of the vegetal tissue (roots, stem, leaves and raceme residue), at the end of the vegetative cycle. The use of soil protection reduced time for the beginning inflorescence of plants, at the same time, the increase of the salinity delayed this phase of amaranth development. The use of the mulch effectively increased the height, stem diameter, area of the larger leaf, humidity and dry matter content and amaranth grain production. The vegetal species showed salinity tolerance to experimented levels. The adopted treatments did not affect the pH values, exchangeable cation contents, electrical conductivity of soil solution (EC1:5) and saturated extract (ECSE), and Ca+2, Mg+, Fe+2 and Mn+2 contents, in the soil solution. The increase of the salinity concentration in the irrigation water inhibited the mineralization process of the organic matter (OM) and, consequently, the efficiency in the it´s utilization by plants, at the same time, produced increase in the values of the exchangeable sodium percentage (ESP), sodium adsorption ratio (SAR) and potassium adsorption ratio (PAR), in the soil solution. Therefore, the use of the mulch did not affect the first three parameters. The protein and nutrient contents: K+, Ca+2, P, Mg+2 e Cu+2, in amaranth grains, were improved by tillage condition. The raceme residues showed chemical/nutritional composition that makes advantageous its application in animal ration. In this context, it follows that amaranth tolerate the saline stress, of the irrigation water, until 4.500 dS m-1, temperature and relative humidity of the air predominant in the experimental environment

Toward the Optimization of an e-Tongue System Using Information Visualization: A Case Study with Perylene Tetracarboxylic Derivative Films in the Sensing Units

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exploiting Distinct Molecular Architectures of Ultrathin Films Made with Iron Phthalocyanine for Sensing

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Voltammetric studies of titanium (IV) phosphate modified with copper hexacyanoferrate and electroanalytical determination of N-acetylcysteine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Copper Hexacyanoferrate Formation on the Modified Silica Surface with DAB-Am-16 Dendrimer

The third generation (G-3) polypropylenimine hexadecaamine dendrimer (DAB-Am-16) was grafted onto the silica gel surface. The modified silica interacts easily with Cu(2+) and then with potassium ferrocyanide to form copper hexacyanoferrate. The modified silica was characterized by the following techniques: Nuclear Magnetic Resonance (NMR), FTIR spectroscopy, Energy Dispersive X-ray (EDX) and Cyclic Voltammetry. The modified silica containing copper hexacyanoferrate (CuHCFSD) was tested for a voltammetric determination of nitrite using a modified graphite paste electrode.

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Biochemical and biological evaluation of gyroxin isolated from Crotalus durissus terrificus venom

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)