Predictors of death among patients who completed tuberculosis treatment: a population-based cohort study.

Background: Mortality among patients who complete tuberculosis (TB) treatment is still high among vulnerable populations. The objective of the study was to identify the probability of death and its predictive factors in a cohort of successfully treated TB patients. Methods: A population-based retrospective longitudinal study was performed in Barcelona, Spain. All patients who successfully completed TB treatment with culture-confirmation and available drug susceptibility testing between 1995 1997 were retrospectively followed-up until December 31, 2005 by the Barcelona TB Control Program. Socio-demographic, clinical, microbiological and treatment variables were examined. Mortality, TB Program and AIDS registries were reviewed. Kaplan-Meier and a Cox regression methods with time-dependent covariates were used for the survival analysis, calculating the hazard ratio (HR) with 95% confidence intervals (CI). Results: Among the 762 included patients, the median age was 36 years, 520 (68.2%) were male, 178 (23.4%) HIV-infected, and 208 (27.3%) were alcohol abusers. Of the 134 (17.6%) injecting drug users (IDU), 123 (91.8%) were HIV-infected. A total of 30 (3.9%) recurrences and 173 deaths (22.7%) occurred (mortality rate: 3.4/100 person-years of follow-up). The predictors of death were: age between 4160 years old (HR: 3.5; CI:2.15.7), age greater than 60 years (HR: 14.6; CI:8.924), alcohol abuse (HR: 1.7; CI:1.22.4) and HIV-infected IDU (HR: 7.9; CI:4.713.3). Conclusions: The mortality rate among TB patients who completed treatment is associated with vulnerable populations such as the elderly, alcohol abusers, and HIV-infected IDU. We therefore need to fight against poverty, and promote and develop interventions and social policies directed towards these populations to improve their survival.

A two-week workshop to promote cardiovascular disease prevention programs in countries with limited resources.

Training is a crucial tool for building the capacity necessary for prevention and control of cardiovascular diseases (CVDs) in developing countries. This paper summarizes some features of a 2-week workshop aimed at enabling local health professionals to initiate a comprehensive CVD prevention and control program in a context of limited resources. The workshops have been organized in the regions where CVD prevention programs are being contemplated, in cooperation with health authorities of the concerned regions. The workshop's content includes a broad variety of issues related to CVD prevention and control, and to program development. Strong emphasis is placed on "learning by doing," and groups of 5-6 participants conduct a small-scale epidemiological study during the first week; during the second week, they draft a virtual program of CVD prevention and control adapted to the local situation. This practice-oriented workshop focuses on building expertise among anticipated key players, strengthening networks among relevant health professionals, and advocating the urgent need to tackle the emerging CVD epidemic in developing countries.

Evaluation des campagnes de prévention contre le SIDA en Suisse : rapport intermédiaire : juillet 1987

Principales constatations a) en termes de résultats (modification d'attitudes et de comportements), b) en termes de processus d'influences, c) à propos du test de dépistage du VIH. Recommandations.

Invasion and eradication of a competitively superior species in heterogeneous landscapes

The effect of heterogeneous environments upon the dynamics of invasion and the eradication or control of invasive species is poorly understood, although it is a major challenge for biodiversity conservation. Here, we first investigate how the probability and time for invasion are affected by spatial heterogeneity. Then, we study the effect of control program strategies (e.g. species specificity, spatial scale of action, detection and eradication efficiency) on the success and time of eradication. We find that heterogeneity increases both the invasion probability and the time to invasion. Heterogeneity also reduces the probability of eradication but does not change the time taken for successful eradication. We confirm that early detection of invasive species reduces the time until eradication, but we also demonstrate that this is true only if the local control action is sufficiently efficient. The criterion of removal efficiency is even more important for an eradication program than simply ensuring control effort when the invasive species is not abundant.

Evaluation of Deicing Materials and Corrosion Reducing Treatments for Deicing Salts, TR-471, 2007

Effective winter maintenance makes use of freezing-point-depressant chemicals (also known as ice-control products) to prevent the formation of the bond between snow and ice and the highway pavement. In performing such winter maintenance, the selection of appropriate ice-control products for the bond prevention task involves consideration of a number of factors, as indicated in Nixon and Williams (2001). The factors are in essence performance measurements of the ice-control products, and as such can be easily incorporated into a specification document to allow for selection of the best ice-control products for a given agency to use in its winter maintenance activities. Once performance measures for de-icing or anti-icing chemicals have been specified, this allows the creation of a quality control program for the acceptance of those chemicals. This study presents a series of performance measurement tests for ice-control products, and discusses the role that they can play in such a quality control program. Some tests are simple and rapid enough that they can be performed on every load of icecontrol products received, while for others, a sampling technique must be used. An appropriate sampling technique is presented. Further, each test is categorized as to whether it should be applied to every load of ice-control products or on a sampling basis. The study includes a detailed literature review that considers the performance of ice-control products in three areas: temperature related performance, product consistency, and negative side effects. The negative side effects are further broken down into three areas, namely operational side effects (such as chemical slipperiness), environmental side effects, and infrastructural side effects (such as corrosion of vehicles and damage to concrete). The review indicated that in the area of side effects the field performance of ice-control products is currently so difficult to model in the laboratory that no particular specification tests can be recommended at this time. A study of the impact of ice-control products on concrete was performed by Professor Wang of Iowa State University as a sub-contract to this study, and has been presented to the Iowa Highway Research Board prior to this report.

Evaluation de la campagne de lutte contre le SIDA de l'Office fédéral de la santé publique (OFSP) : 1987-1988 : questionnaires et guides d'interviews : annexe au Cahier no 16 s.1

[Table des matières] Comportements à risque et usage des préservatifs (enquête représentative auprès des jeunes Suisses de 17-30 ans): questionnaire. - Comportements à risque et usage de préservatifs (enquête auprès des médecins Sentinelles): questionnaires. - Attitudes des leaders d'opinion informels: questionnaires. - Enquête "Adolescents": questionnaire et guide d'entretien. - Enquête "Dragueurs": projet de grille-questionnaire. - Enquête "Sex-tourisme tropical": guide d'interview. - Enquête "Homosexuels": questionnaire et guide d'interview. - Enquête "Toxicomanes": questionnaire.

Burden of Diabetes in Iowa 1991-2009, Final Report, May 2010

The Iowa Diabetes Prevention and Control Program provides educational opportunities for health care providers via the Iowa Communications Network interactive fiber optic system. The program also certifies diabetes outpatient education programs in Iowa based on minimum criteria for quality programs. In Iowa during the past 20 years, the prevalence rate of diagnosed diabetes increased dramatically among adults: Between 1991 and 2009 the crude diabetes prevalence rate rose by 84%, from 3.8% to 7.0%. Between these years, the age‐adjusted adult diagnosed diabetes prevalence rate increased by 64%, rising from 3.7% to 6.4%. During the 18 years 1991‐93 through 2006‐08, the number of Iowa adults with diagnosed diabetes more than doubled, increasing from 78,000 to 162,000. While the Iowa Behavioral Risk Factor Surveillance System (BRFSS), upon which the numbers cited above are based, provides reliable state‐level self‐reported data on adults with diagnosed diabetes, it is unable to provide estimates of undiagnosed diabetes. National estimates put the prevalence of undiagnosed adult diabetes at about 5%, raising the estimated adult diabetes prevalence rate in Iowa to 12% (280,000 adults) (Cowie,2009). Another 5% of all Iowa adults are estimated to have diagnosed pre‐diabetes, while 25% of all Iowa adults, based on national estimates from the 2005‐06 National Health and Nutrition and Examination Survey (NHANES), likely have undiagnosed pre‐diabetes. (Cowie, 2009)

Evaluation des campagnes de prévention du SIDA en Suisse : rapport intermédiaire : (juillet 1988)

Le présent rapport intermédiaire concerne l'impact de la suite de la campagne STOP-SIDA et des autres aspects de la prévention (actions multiplicatrices, compléments à la campagne STOP-SIDA), à partir du mois d'octobre 1987. Il fait référence entre autres à la phase III de STOP-SIDA: répétition des messages des phases I et II (usage du préservatif, non-échange de matériel d'injection, fidélité) et situations sans risque de contamination. Les données présentées sont le résultat d'une synthèse préliminaire basée sur des études en cours de réalisation, elles ne peuvent donc être interprétées qu'en termes de premières tendances ou impressions, qui devront encore être confirmées ou infirmées par l'achèvement des études. Elles permettent cependant de formuler quelques conclusions et recommandations. [Auteurs, p. 5-6]

Burden of Diabetes in Iowa 1990-2009, Final Report, April 2011

The Iowa Diabetes Prevention and Control Program provides educational opportunities for health care providers via the Iowa Communications Network interactive fiber optic system. The program also certifies diabetes outpatient education programs in Iowa.

Prevalencia de la infección tuberculosa y por el VIH en los usuarios de un programa de reducción de riesgos para usuarios de drogas por vía parenteral (UDVP)

FUNDAMENTO: Determinar la prevalencia de la infección tuberculosa y por el VIH, así como los factores asociados, en la población de usuarios del programa de reducción de riesgos de la ciudad de Lleida. MÉTODOS: La muestra la formaron los nuevos usuarios del programa en el período abril-junio de 1996, entre los los cuales se realizó un cuestionario para la recogida de datos de las variables: edad, sexo, resultado de la prueba de la tuberculina, vacunación BCG, conocimiento de la serología frente al VIH, ingreso en prisión y años de consumo de heroína. Se calculó la prevalencia de la infección tuberculosa y por el VIH, con el intervalo de confianza (IC) del 95%. La asociación de ambas variables con el resto de variables del estudio se determinó mediante la odds ratio (OR) y su IC del 95% . RESULTADOS: Acudieron 150 pacientes diferentes, de los cuales 45 eran nuevos usuarios. De ellos, el 80,0% eran varones, con una edad media de 31,1 años. La prevalencia de la coinfección fue del 8,9% (IC 95% 2,8-22,1). La prevalencia de la infección tuberculosa fue de 27,3% (IC 95% 12,4-43,0), siendo superior en los que tenían antecedentes de ingreso en prisión (OR=3,4; IC 95% 0,5-27,4). La prevalencia de la infección por el VIH fue del 36,1% (IC 95% 21,3-53,8), siendo superior en los que tenían una antigüedad, en el consumo de heroína, superior a los 11 años ( OR = 7,3; IC 95% 1,0-65,9). CONCLUSIONES: El antecedente de ingreso en prisión es el principal factor de riesgo de la infección tuberculosa. Los años de consumo se asocian con la infección por el VIH, especialmente a partir de los 11 años. Los programas de reducción de riesgos de nuestro país deberían realizar actividades de control de la infección tuberculosa y por VIH.

Hapettavan BIMODES-mikrobientorjuntamenetelmän vaikutukset paperikoneella

The aim of this study was to examine the effects of oxidising BIMODES microbiological control program on three paper machine process. The chemicals used in BIMODES program are sodium hypochlorite (NaOCl) and bromo-chloro-di-methyl-hydantoin (BCDMH). The literary part of this study discusses the microbiological problems in paper making industry, describes functional mechanisms of oxidants and also introduces the BIMODES- program. In the experimental part the aim was to examine the effects of BIMODES in three different paper machines. The purpose was to find out the effects and changes in wet end chemistry, bacterial counts, in the other additives and also in the sheet defects and holes. The study also examines what are the most important measurements to control BIMODES dosing. In addition the optimal dosing level for each machine was tried to find out. It was found that there is a clear correlation between the total chlorine level and bacterial counts. Changes in the BIMODES dosing level can be measured by redox potential, but the correlation is very poor. BIMODES program doesn’t have straight influence to pH values, but if dosage level is too low the bacterial activity can affect degreasing in the pH value. In this study couldn’t find any consequential effects for the other additives by using BIMODES. In addition the optimal dosing levels were found and by following correct halogen levels it is possible to decrease bacterial levels for very low level.

Disseny d'una màquina carregadora de planxa a l'empresa Serralleria i Alumini Vilaró (S.A.V)

Les empreses sempre han buscat com optimitzar el màxim els seus recursos i ser més eficients a la hora de realitzar les tasques que li han estat encomanades. És per aquest motiu que constantment les empreses realitzen estudis i valoracions de com poder millorar dia a dia. Aquest fet no és diferenciador a l’empresa Serralleria i Alumini Vilaró (S.A.V), que dia a dia estudia com optimitzar els seus processos o de vegades introduir-ne de nous per tal d’expandir la seva oferta de serveis. L’empresa és dedica a la fabricació de peces metàl•liques el procés ja sigui només de tall i mecanitzat, plegat, soldadura, acabats en inoxidable, pintura i fins i tot embalatge pel que fa a la part productiva, respecte a la part d’oficina tècnica també ofereix serveis de desenvolupament de productes segons especificacions del client i reenginyeria de qualsevol producte, analitzant la part que és vol millorar. En l’actualitat l’empresa ha detectat una mancança que creu que es podria solucionar, el problema és que l’empresa disposa de varies màquines de tall, entre les quals hi ha una màquina de tall làser i el problema principal és que la càrrega de les planxes del calaix de magatzem a la bancada de la màquina es realitza o bé manualment o a través d’un gripper sostingut al pont grua, depenent del pes de la planxa a transportar. L’objectiu principal d’aquest treball és fer el disseny d’una màquina que permeti automatitzar el procés de transportar la planxa metàl•lica del calaix de magatzem dipositat sobre una taula mòbil a la bancada de la màquina de tall. El disseny que pretenem fer és complet començant per fer un disseny estructural de la màquina més els seus respectius càlculs, moviments que volem aconseguir, tria de components ( motors, sensors ...), elaboració d’un pressupost per poder fer una estimació i finalment la elaboració del programa de control de tota la màquina més la interacció amb la màquina a través d’una pantalla tàctil. Es a dir, el que pretenem és realitzar un projecte que puguem fabricar en la realitat utilitzant tota la informació continguda dins del mateix

Innovació empresarial en el procés de transmissió de dades mitjançant una aplicació mòbil

Disposar d’informació de qualitat, en el moment oportú i en el volum adequat és el que actualment necessiten les empreses per poder prendre decisions òptimes. L’empresa JCM Technologies no és una excepció i és en la obtenció d’informació del procés productiu de l’empresa on aquest projecte pren part. L’objectiu d’aquest projecte de final de màster ha consistit en desenvolupar un sistema capaç d’aportar a l’empresa informació sobre els resultats obtinguts durant el control de qualitat dels … [+]productes, informació de la qual no disposava. Les dades existien però no es podien convertir en informació valuosa perquè no es disposava d’un mecanisme capaç tractar-les. Per complir els objectius marcats s’ha creat un sistema format pels següents elements: una aplicació per dispositius mòbils Android, una base de dades, un nou programa pel control de la qualitat i aplicatiu servidor. L’aplicació permet obtenir i visualitzar la informació. La base de dades és on es guarda la informació que envia el programa del control de qualitat i finalment, l’aplicatiu servidor habilita la comunicació entre els diferents elements descrits. El fet que dóna valor al sistema és que tots els elements que el formen tenen la capacitat de comunicar-se entre ells mitjançant Internet. Gràcies a això, és possible obtenir informació a temps real de la producció que s’està portant a terme a qualsevol punt del món. En conclusió, cal dir que els objectius s’han complert ja que s’ha aconseguit un sistema ràpid i segur. D’aquesta manera JCM Technologies pot disposar d’una informació molt valuosa que li permet que certes decisions no siguin preses a l’atzar.

A Test Bed Applied Mobile Robot Navigation

It is presented a test bed applied to studies on dynamics, control, and navigation of mobile robots. A cargo ship scale model was chosen, which can be radio-controlled or operated autonomously through an embedded control system. A control program, which manages on board mission execution, is implemented on a microcontroller. Navigation is based on an electronic compass, which includes automatic compensation for pitch and roll motions. Heading control loop is based on this sensor, and on a rudder positioning system. A propulsion control system is also implemented. Typical manoeuvres as the turning test and "zig-zag", were implemented and tested. They are included on a manoeuvre library, and can be accessed independently or in combined modes. The embedded system is also in charge of signal acquisition and storing during the missions. It is possible to analyse experiments on identification of ship dynamics, control, and navigation, through the data transferred to a PC by serial communication. Navigation is going to be improved by including inertial sensors on board, and a DGPS. Preliminary tests are aimed to ship identification, and manoeuvrability, using free model tests. Future steps include extending this system for developing other mobile robots as, ROVs, AUVs, and aerial vehicles.