Estudo da dinâmica e destino ambiental dos fluidos usados na usinagem industrial de peças metálicas

Este estudo consistiu na investigação sobre a interação dos lubrificantes empregados na usinagem de metais com a matéria orgânica natural (substâncias húmicas), a sua mobilidade no solo, a degradação microbiológica e a remoção dos mesmos do solo. Realizou-se, também, um estudo sobre as mudanças nas características dos fluidos após a sua utilização. Para o processo de degradação das amostras de fluido, submetidos aos efeitos de diferentes fatores ambientais, foram utilizados quatro tratamentos : (i) microrganismos nativos, chamada amostra controle; (ii) amostra controle com matéria orgânica proveniente de turfa; (iii) amostra controle acrescida de microrganismos existentes nos efluentes de máquinas de corte; e (iv) amostra controle com adição de microrganismos de compostagem. Para a pesquisa da degradação sem o efeito dos parâmetros climáticos, foram utilizadas amostras de solo contaminadas mantendo-se em estufa, e a inoculação dos microrganismos em meios de cultura com e sem acréscimo de fonte alternativa de carbono. Como técnicas analíticas, foram utilizadas a CG-DIC e a CG-EM. Essas técnicas são indicadas tanto para estudar a composição dos fluidos quanto dos produtos de degradação microbiológica, tendo sido otimizados métodos analíticos para serem empregados no monitoramento ambiental e de estudos de degradação. As análises por IVTF e por EF também foram empregadas na identificação e quantificação dos fluidos. Observou-se uma considerável interação dos fluidos solúveis com a matéria orgânica do solo, embora tenham se apresentado com alta mobilidade para alguns constituintes, bem como um acelerado processo de degradação durante o uso. De outro modo, os fluidos insolúveis se apresentaram mais imóveis, ficando retidos na matéria orgânica do solo, entretanto, foram mais prontamente degradados no ambiente que os solúveis. A adição de matéria orgânica e de microrganismos de compostagem acelerou o processo de degradação para todos os fluidos de corte investigados.

Potencial de fitorremediação de diferentes plantas em solo contaminado por 14C-tebuthiuron

Este trabalho teve como objetivo avaliar a tolerância e a capacidade de fitorremediação de crotalária (Crotalaria spectabilis), sorgo (Sorghum bicolor), nabo forrageiro (Raphanus sativus), amendoim (Arachis hypogaea) e alfafa (Mendicago sativa) a solos contaminados por tebuthiuron. Para determinar a tolerância das plantas ao herbicida estas foram submetidas a 5 diferentes doses (300, 600, 1200, 2400 e 4800 gramas de ingrediente ativo por hectare gi.a. ha-1) e comparadas com uma testemunha que não recebeu aplicação do herbicida. Crotalária, Nabo forrageiro e alfafa se mostraram sensíveis ao herbicida, mesmo na menor dose de aplicação, enquanto sorgo se mostrou tolerante ao herbicida até a dose de 600 gi.a. ha-1 tendo apresentado fitointoxicação de 80% na dose de 1200 gi.a. ha-1 e amendoim foi tolerante até a dose de 4800 gi.a. ha-1 para a qual apresentou apenas 40% de fitointoxicação. Plantas de amendoim e sorgo foram submetidas a dose de contaminação de 600 gi.a. ha-1 aplicada por meio de uma solução de trabalho contendo 17,47kBq (Quilobecquerels) de 14C-tebuthiuron. As duas plantas foram capazes de remediar o solo, no entanto amendoim se mostrou mais eficiente reduzindo a contaminação em 75,8% enquanto sorgo retirou do solo 44,49% do herbicida contaminante

Aplicação de tratamentos eletroquímicos integrados para remediação de solos e águas contaminadas com petróleo e pesticidas

Electrochemical technologies have been proposed as a promising alternative for the treatment of effluents and contaminated soils. Therefore, the objective of this work was to study the treatment of contaminated soils and wastewaters using electrochemical technologies. Thus, the study regarding the scale-up of the electrochemical system with continuous flow treatment of wastewater of the petrochemical industry was investigated using platinum electrodes supported on titanium (Ti / Pt), and boron-doped diamond (BDD). The results clearly showed that under the operating conditions studied and electrocatalytic materials employed, the better removal efficiency was achieved with BDD electrode reducing the chemical oxygen demand (COD) from 2746 mg L-1 to 200 mg L-1 in 5 h consuming 56.2 kWh m-3 . The decontamination of soils and effluents by petrochemical products was evaluated by studying the effects of electrokinetic remediation for removal of total petroleum hydrocarbons (HTP) from contaminated soil with diesel. The efficiency of this process was dependent on the electrolyte used Na2SO4 (96.46%), citric acid (81.36%) and NaOH (68.03%) for 15 days. Furthermore, the effluent after treatment of the soil was treated by electrochemical oxidation, achieving a good elimination of the organic polluting load dissolved. Depending on the physical behavior of wastewater contaminated with oil (emulsified state); atrazine emulsified effluents were investigated. The main characteristics of the effluent produced during the washing of contaminated soil were studied, being dependent on the surfactant dosage used; which determined its electrolytic treatment with BDD. The electrochemical oxidation of emulsified effluent of atrazine was efficient, but the key to the treatment is reducing the size of micelles.

Cadmium phytoextraction capacity of white lupine ( Lupinus albus L.) and narrow-leafed lupine ( Lupinus angustifolius L.) in three contrasting agroclimatic conditions of Chile

The phytoextraction process implies the use of plants to promote the elimination of metal contaminants in the soil. In fact, metal-accumulating plants are planted or transplanted in metal-contaminated soil and cultivated in accordance with established agricultural practices. The objective of the present study was to evaluate the productivity and Cd phytoextraction capacity of white lupine ( Lupinus albus L.) and narrow-leafed lupine ( Lupinus angustifolius L.), as well as the effect on residual Cd concentration in the soil. Both species of lupines were grown at three CdCl2 rates (0, 1, and 2 mg kg-1), under three agroclimatic conditions in Chile in 2013. In the arid zone (Pan de Azúcar, 73 mm precipitation), narrow-leafed lupine production was significantly (P < 0.05) higher than white lupine (4.55 vs. 3.26 Mg DM ha-1, respectively). In locations with higher precipitation (Santa Rosa, 670 mm; Carillanca, 880 mm), narrow-leafed lupine DM production was slightly higher than in Pan de Azúcar, but white lupine was approximately three times higher. Total plant Cd concentrations in white and narrow-leafed lupine increased as Cd rates increased in the three environments, but they were much higher in narrow-leafed lupine than white lupine; 150%, 58%, and 344% higher in Pan de Azúcar, Santa Rosa, and Carillanca, respectively. Cadmium uptake (g Cd ha-1) and apparent recovery were also higher (P < 0.05) in narrow-leafed lupine in two environments (Pan de Azúcar and Carillanca). These results suggest that narrow-leafed lupine present higher potential as phytoremediation species than white lupine.

Solução semi-analítica para modelagem das condições inicial e de contorno aplicáveis ao ensaio de difusão pura

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.

Efetividade da doxiciclina na profilaxia contra letptospirose

Leptospirosis is a worldwide zoonosis of considerable medical and economical importance that affects humans in both urban and rural contexts, as well as domestic animals and wild fauna. Leptospira interrogans is the causative agent and is transmitted to humans by indirect contact with contaminated soil or water. The clinical syndromes include sub clinical infection, self-limited anicteric febrile illness, and severe and potentially fatal illness, known as Weil´s syndrome. In developed countries, leptospirosis is related to occupational or recreational activities while in developing countries, outbreaks occur during floods. In those regions, traditional strategies to prevent the transmission are difficulties to be implemented because of costs and lack of community acceptance. In addition, no efficient vaccine is available for human use. Several studies have suggested that chemoprophylaxis with doxycycline pre and post-exposure may be effective to prevent leptospirosis. Leptospirosis has been reported in rural areas of the State of Rio Grande do Norte, Brazil since 1985 in rice farmers who present the anicteric illness. The disease cause great social and economics impact. The study was conducted in São Miguel where an epidemic of leptospirosis in rice farmers was reported. The main objective was to determine the efficacy of doxycycline in preventing Leptospira exposure. A taxa de soroprevalência de leptospirose na população estudada antes e após a colheita foi de 14,2% (n=22) e de 16.6% (n=27) respectivamente. Anti-Leptospira serology was determined for 61 subjects in two instances, pre and post-exposure to potential contaminated water. There was an increased risk of 29.0 per cent in acquiring infection for individuals that did not use doxycycline. In addition, an increased risk of 30.0 % observed in farmers who did not use protection when exposed to Leptospira. The adhesion to preventive chemoprophylaxis was 55.7%. Therefore doxycycline, under specific circunstances appears to be an effective alternative to protect against leptosprirosis infection. A large sample composed of individuals to adhere to preventive therapy is needed to define time, dosage and length of use of doxycycline in this area

An Analysis of the Potential Risk Exposure to Lead (Pb) through Urban Community Gardens

Community gardening in cities is increasing, driven by social interaction and food security. City soils are sinks for heavy metals; including neurotoxic lead (Pb). Exposure routes are primarily through inhalation/ingestion of soil, or second by ingestion of plants that have accumulated Pb. This research evaluates soil at three Liberty City, Florida sites estimating risk of Pb exposure through primary and secondary pathways. Soil cores were collected from Liberty City, and red Malabar spinach (Basella rubra) was grown in Pb soil treatments in a greenhouse. Total soil Pb levels and plant tissues were measured after acid digestion, by ICP-OES. In Liberty City, two sites had hotspots with areas of elevated soil Pb levels. Plants grown on Pb contaminated soil all accumulated statistically significant Pb concentrations. Therefore, there is a potential risk of Pb exposure to residents in Liberty City by exposure in hotspot sites through both the primary and secondary pathways.

Initial growth of sunflower in soils with high concentrations of boron and heavy metals.

Phytoremediation studies have been conducted in an area contaminated by heavy metals, located in Piracicaba - SP, Brazil. This area was contaminated accidentally by the addition of auto scrap shredding to the soil and was limed later to reduce heavy metal mobility in the environment. Previous characterization showed that it also presents high concentration of boron, which has limited the initial plant development of some species. As sunflower plants require a high boron supply and the literature describes its use in the phytoremediation of soils contaminated with heavy metals under some conditions, the aim of this work was to evaluate its potential for the remediation of this area. In the present study, the results of preliminary tests are presented, aiming at the evaluation of sunflower plant germination and its initial development when cultivated in the contaminated soil described. Two sunflower hybrids were sown in soils treated with different rates of boron and in the soil from the contaminated area in study. The results showed that sunflower plants had a normal initial development, even in the soil from the contaminated area. Therefore, sunflower is a promising crop and further studies will be developed to evaluate the sunflower efficiency in phytoextraction or phytostabilization of heavy metals in areas where boron contamination also occurs, as is the case in the study area.

Liquid biofuels for aviation: valorisation of the by-product biochar

Biochar is a carbonaceous material produced through pyrolysis of biomass. One promising application of biochar is phosphorus recovery from wastewater. Phosphorus is a vital nutrient for plant growth, but its use in fertilizers often leads to runoff or leaching. Wastewater treatment plants discharge large amounts of phosphorus-rich wastewater, contributing to eutrophication and ecological harm. Biochar can sorb phosphorus, retaining it in solid form. In this thesis, two composites made of biomass and dolomite or shells exhibited superior phosphate sorption compared to biochar alone, reaching up to 100% sorption. Biochar also finds use in soil remediation, specifically in cleaning up contaminated soil. Polycyclic aromatic hydrocarbons (PAHs), which can be carcinogenic and toxic, can be present in soil. Biochar adsorb PAHs, preventing their leakage or bioaccumulation. Hetero-PAHs, a subclass of PAHs with nitrogen, sulfur, or oxygen atoms in their ring structures, are particularly challenging to degrade. Little is known about their behavior or sorption onto biochar. In this thesis, biochar and activated carbon were effective in immobilizing PAHs and hetero-PAHs in real soils, with rates of immobilization reaching 100%. Biochar performed equally or better than activated carbon, offering a cost-effective alternative due to its lower price. Biochar reduce of metal(loid)s mobility in soil. Metal(loid)s like lead, zinc, and arsenic can contaminate soil through industrial sources, agricultural runoff, and other pollution, and are toxic to plants and animals, rendering the soil unsuitable for agriculture. When biochar is added to contaminated soil, it binds to metal(loid)s, preventing leaching into the environment. A biomass-dolomite composite was compared to activated carbon for immobilizing metal(loid)s in contaminated soils. The composite generally outperformed activated carbon and exhibited the ability to immobilize arsenic. In summary, biochar shows promise for phosphorus recovery, soil remediation, and reducing the mobility of heavy metals, offering cost-effective and sustainable solutions to these environmental challenges.

Greenhouse gases emission from soil contaminated with automobile industry residue in Brazil

Solid waste of the automobile industry containing large amounts of heavy metals might affect the emission of greenhouse gases (GHG) when applied to the soil. Accumulation of inorganic chemical elements in the environment generally occurs due to human activity (industry, agriculture, mining and waste landfills). Residues from human activities may release heavy metals to the soil solution, causing toxicity to plants and other soil organisms. Heavy metals may also be adsorbed to clay minerals and/or complexed by the soil organic matter, becoming a potential source of pollutants. Not much is known about the behavior of solid wastes in tropical soil as regarded as source of greenhouse gases (GHG). The emission of GHG (CO(2), CH(4) and N(2)O) was evaluated in incubated soil samples collected in an area contaminated with a solid residue from an automobile industry. Samples were randomly collected at 0 to 0.2 m (a mix of soil and residue), 0.2 to 0.4 m (only residue) and 0.4 to 0.6 m (only soil). A contiguous uncontaminated area, cultivated with sugarcane, was also sampled following the same protocol. Canonical Discriminant Analysis and Principal Component Analysis were applied to the data to evaluate the GHG emission rates. Emission rates of GHG were greater in the samples from the contaminated than the sugarcane area, particularly high during the first days of incubation. CO(2) emissions were greater in samples collected at the upper layer for both areas, while CH(4) and N(2)O emissions were similar in all samples. The emission rates of CH(4) were the most efficient variables to differentiate contaminated and uncontaminated areas.

Remediation of sandy soils contaminated with hydrocarbons and halogenated hydrocarbons by soil vapour extraction

This paper presents the study of the remediation of sandy soils containing six of the most common contaminants (benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene) using soil vapour extraction (SVE). The influence of soil water content on the process efficiency was evaluated considering the soil type and the contaminant. For artificially contaminated soils with negligible clay contents and natural organic matter it was concluded that: (i) all the remediation processes presented efficiencies above 92%; (ii) an increase of the soil water content led to a more time-consuming remediation; (iii) longer remediation periods were observed for contaminants with lower vapour pressures and lower water solubilities due to mass transfer limitations. Based on these results an easy and relatively fast procedure was developed for the prediction of the remediation times of real soils; 83% of the remediation times were predicted with relative deviations below 14%.

Sequential application of soil vapor extraction and bioremediation processes for the remediation of ethylbenzene-contaminated soils

Soil vapor extraction (SVE) is an efficient, well-known and widely applied soil remediation technology. However, under certain conditions it cannot achieve the defined cleanup goals, requiring further treatment, for example, through bioremediation (BR). The sequential application of these technologies is presented as a valid option but is not yet entirely studied. This work presents the study of the remediation of ethylbenzene (EB)-contaminated soils, with different soil water and natural organic matter (NOMC) contents, using sequential SVE and BR. The obtained results allow the conclusion that: (1) SVE was sufficient to reach the cleanup goals in 63% of the experiments (all the soils with NOMC below 4%), (2) higher NOMCs led to longer SVE remediation times, (3) BR showed to be a possible and cost-effective option when EB concentrations were lower than 335 mg kgsoil −1, and (4) concentrations of EB above 438 mg kgsoil −1 showed to be inhibitory for microbial activity.

Behavior of Eucalyptus urophylla and Eucalyptus citriodora Seedlings Grown in Soil Contaminated by Arsenate

ABSTRACT Persistent areas of tailings and deposits from coal and gold mining may present high levels of arsenic (As), mainly in the arsenate form, endangering the environment and human health. The establishment of vegetation cover is a key step to reclaiming these environments. Thus, this study aimed to evaluate the potential of Eucalyptus urophylla and E. citriodora seedlings for use in phytoremediation programs of arsenate-contaminated areas. Soil samples were incubated at increasing rates (0, 50, 100, 200 and 400 mg dm-3) of arsenic (arsenate form, using Na2HAsO4) for 15 days. The seedlings were produced in a substrate (vermiculite + sawdust) and were transplanted to the pots with soil three months after seed germination. The values of plant height and diameter were taken during transplanting and 30, 60 and 90 days after transplanting. In the last evaluation, the total leaf area and biomass of shoots and roots were also determined. The values of available As in soil which caused a 50 % dry matter reduction (TS50%), the As translocation index (TI) from the roots to the shoot of the plants, and its bioconcentration factor (BF) were also calculated. Higher levels of arsenate in the soil significantly reduced the dry matter production of roots and shoots and the height of both species, most notably in E. urophylla plants. The highest levels of As were found in the root, with higher values for E. citriodora (ranging from 253.86 to 400 mg dm-3). The TI and BF were also reduced with As doses, but the values found in E. citriodora were significantly higher than in E. urophylla. E. citriodora plants presented a higher capacity to tolerate As and translocate it to the shoot than E. urophylla. Although these species cannot be considered as hyperaccumulators of As, E. citriodora presented the potential to be used in phytoremediation programs in arsenate-contaminated areas due to the long-term growth period of this species.