Image quality assessment and medical physics evaluation of different portable dental X-ray units

Introduction: Recently developed portable dental X-ray units increase the mobility of the forensic odontologists and allow more efficient X-ray work in a disaster field, especially when used in combination with digital sensors. This type of machines might also have potential for application in remote areas, military and humanitarian missions, dental care of patients with mobility limitation, as well as imaging in operating rooms. Objective: To evaluate radiographic image quality acquired by three portable X-ray devices in combination with four image receptors and to evaluate their medical physics parameters. Materials and methods: Images of five samples consisting of four teeth and one formalin-fixed mandible were acquired by one conventional wall-mounted X-ray unit, MinRay (R) 60/70 kVp, used as a clinical standard, and three portable dental X-ray devices: AnyRay (R) 60 kVp, Nomad (R) 60 kVp and Rextar (R) 70 kVp, in combination with a phosphor image plate (PSP), a CCD, or a CMOS sensor. Three observers evaluated images for standard image quality besides forensic diagnostic quality on a 4-point rating scale. Furthermore, all machines underwent tests for occupational as well as patient dosimetry. Results: Statistical analysis showed good quality imaging for all system, with the combination of Nomad (R) and PSP yielding the best score. A significant difference in image quality between the combination of the four X-ray devices and four sensors was established (p < 0.05). For patient safety, the exposure rate was determined and exit dose rates for MinRay (R) at 60 kVp, MinRay (R) at 70 kVp, AnyRay (R), Nomad (R) and Rextar (R) were 3.4 mGy/s, 4.5 mGy/s, 13.5 mGy/s, 3.8 mGy/s and 2.6 mGy/s respectively. The kVp of the AnyRay (R) system was the most stable, with a ripple of 3.7%. Short-term variations in the tube output of all the devices were less than 10%. AnyRay (R) presented higher estimated effective dose than other machines. Occupational dosimetry showed doses at the operator`s hand being lowest with protective shielding (Nomad (R): 0.1 mu Gy). It was also low while using remote control (distance > 1 m: Rextar (R) < 0.2 mu Gy, MinRay (R) < 0.1 mu Gy). Conclusions: The present study demonstrated the feasibility of three portable X-ray systems to be used for specific indications, based on acceptable image quality and sufficient accuracy of the machines and following the standard guidelines for radiation hygiene. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

MAX4 and RMS1 are orthologous dioxygenase-like genes that regulate shoot branching in Arabidopsis and pea

Shoot branching is inhibited by auxin transported down the stem from the shoot apex. Auxin does not accumulate in inhibited buds and so must act indirectly. We show that mutations in the MAX4 gene of Arabidopsis result in increased and auxin-resistant bud growth. Increased branching in max4 shoots is restored to wild type by grafting to wild-type rootstocks, suggesting that MAX4 is required to produce a mobile branch-inhibiting signal, acting downstream of auxin. A similar role has been proposed for the pea gene, RMS1. Accordingly, MAX4 and RMS1 were found to encode orthologous, auxin-inducible members of the polyene dioxygenase family.

Using different satellite imagery and classification techniques to assess the contribution of trees outside forests in the municipality of Maringá, Brazil

Forest cover of the Maringá municipality, located in northern Parana State, was mapped in this study. Mapping was carried out by using high-resolution HRC sensor imagery and medium resolution CCD sensor imagery from the CBERS satellite. Images were georeferenced and forest vegetation patches (TOFs - trees outside forests) were classified using two methods of digital classification: reflectance-based or the digital number of each pixel, and object-oriented. The areas of each polygon were calculated, which allowed each polygon to be segregated into size classes. Thematic maps were built from the resulting polygon size classes and summary statistics generated from each size class for each area. It was found that most forest fragments in Maringá were smaller than 500 m². There was also a difference of 58.44% in the amount of vegetation between the high-resolution imagery and medium resolution imagery due to the distinct spatial resolution of the sensors. It was concluded that high-resolution geotechnology is essential to provide reliable information on urban greens and forest cover under highly human-perturbed landscapes.

Basic dyestuffs removal from textile effluents using feathers: equilibrium, kinetic and column studies

This research work has been focused in the study of gallinaceous feathers, a waste that may be valorised as sorbent, to remove the Dark Blue Astrazon 2RN (DBA) from Dystar. This study was focused on the following aspects: optimization of experimental conditions through factorial design methodology, kinetic studies into a continuous stirred tank adsorber (at pH 7 and 20ºC), equilibrium isotherms (at pH 5, 7 and 9 at 20 and 45ºC) and column studies (at 20ºC, at pH 5, 7 and 9). In order to evaluate the influence of the presence of other components in the sorption of the dyestuff, all experiments were performed both for the dyestuff in aqueous solution and in real textile effluent. The pseudo-first and pseudo-second order kinetic models were fitted to the experimental data, being the latter the best fit for the aqueous solution of dyestuff. For the real effluent both models fit the experimental results and there is no statistical difference between them. The Central Composite Design (CCD) was used to evaluate the effects of temperature (15 - 45ºC) and pH (5 - 9) over the sorption in aqueous solution. The influence of pH was more significant than temperature. The optimal conditions selected were 45ºC and pH 9. Both Langmuir and Freundlich models could fit the equilibrium data. In the concentration range studied, the highest sorbent capacity was obtained for the optimal conditions in aqueous solution, which corresponds to a maximum capacity of 47± 4 mg g-1. The Yoon-Nelson, Thomas and Yan’s models fitted well the column experimental data. The highest breakthrough time for 50% removal, 170 min, was obtained at pH 9 in aqueous solution. The presence of the dyeing agents in the real wastewater decreased the sorption of the dyestuff mostly for pH 9, which is the optimal pH. The effect of pH is less pronounced in the real effluent than in aqueous solution. This work shows that feathers can be used as sorbent in the treatment of textile wastewaters containing DBA.

Determination of polyphenols in wines by reaction with 4-aminoantipyrine and photometric flow-injection analysis

A new flow-injection analytical procedure is proposed for the determination of the total amount of polyphenols in wines; the method is based on the formation of a colored complex between 4-aminoantipyrine and phenols, in the presence of an oxidizing reagent. The oxidizing agents hexacyanoferrate(III), peroxodisulfate, and tetroxoiodate(VII) were tested. Batch trials were first performed to select appropriate oxidizing agents, pH, and concentration ratios of reagents, on the basis of their effect on the stability of the colored complex. Conditions selected as a result of these trials were implemented in a flow-injection analytical system in which the influence of injection volume, flow rate, and reaction- coil length, was evaluated. Under the optimum conditions the total amount of polyphenols, expressed as gallic acid, could be determined within a concentration range of 36 to 544 mg L–1, and with a sensitivity of 344 L mol–1 cm–1 and an RSD <1.1%. The reproducibility of analytical readings was indicative of standard deviations <2%. Interference from sugars, tartaric acid, ascorbic acid, methanol, ammonium sulfate, and potassium chloride was negligible. The proposed system was applied to the determination of total polyphenols in red wines, and enabled analysis of approximately 55 samples h–1. Results were usually precise and accurate; the RSD was <3.9% and relative errors, by the Folin–Ciocalteu method, <5.1%.

Dominant and Recessive RYR1 Mutations in Adults with Core Lesions and Mild Muscle Symptoms

INTRODUCTION: Ryanodine receptor gene (RYR1) mutations have been associated with central core disease (CCD), multiminicore/minicore/multicore disease (MmD), and susceptibility to malignant hyperthermia (MH). METHODS: Patients with muscle symptoms in adulthood, who had features compatible with CCD/MmD, underwent clinical, histological, and genetic (RYR1 and SEPN1 genes) evaluations. Published cases of CCD and MmD with adult onset were also reviewed. RESULTS: Eight patients fulfilled the criteria for further analysis. Five RYR1 mutations, 4 of them unreported, were detected in 3 patients. Compound heterozygosity was proven in 1 case. CONCLUSIONS: To our knowledge, this is the only report of adult onset associated with recessive RYR1 mutations and central core/multiminicores on muscle biopsy. Although adult patients with CCD, MmD, and minimally symptomatic MH with abnormal muscle biopsy findings usually have a mild clinical course, differential diagnosis and carrier screening is crucial for prevention of potentially life-threatening reactions to general anesthesia.

Calibration, selection and mosaicing of SMART-1 AMIE images

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Sustancias lipídicas y proteicas en semillas de dicotiledóneas Americanas

Se estudian mediante métodos clásicos y modernos las características físicas y químicas cuali y cuantitativas de semillas oleaginosas y potencialmente oleaginosas silvestres y cultivadas del centro y noreste de Argentina, como así también materiales de Bolivia, Perú y Ecuador. Las familias de plantas que se indagan son Apocináceas, Cactáseas, Curcubitáceas y Solanáceas. Se enfatizará en contenido de aceite, composiciones acídicas, esteroles, hidrocarburos, proteínas solubles y totales. Se estudian además algunos procesos oxidativos en los lípidos semiales. Para la resolución de los problemas se recurre a diferentes técnicas tales como extracción sólido-líquido, líquido-líquido, cromatografía CCD, CGL y HPLC, espectroscopía visible, UV, IR, RMN y EM. Los objetivos son realizar aportes a la fitoquímica y quimiotaxonomía utilizando componentes lipídicos y proteicos semiales. Los trabajos son continuación de una de nuestras líneas de investigación. Objetivos generales: Conocer las características de las fracciones saponificable e insaponificable de los aceites semiales, como así como también las proteínas totales y solubles de semillas de especies silvestres y cultivadas que crecen en Argentina y otros países de América. Objetivos específicos: -Conocer las características de los ácidos grasos enoicos y sus productos de oxidación. - Establecer mediante técnicas numéricas los balances y asociaciones que pueden originarse entre las muestras, utilizando como parámetros los acilglicéridos, composición acídica, esteroles, hidrocarburos, terpenoides, fracciones proteicas, características físicas de las semillas, etc., con finalidades fitoquímicas, quimiotaxonómicas y eventualmente su proyección como semillas potencialmente oleaginosas.

Optimización telémetro láser

Durante el año 1995 se encaró el proyecto "Telémetro Láser aplicable a robótica" en el ámbito de la Universidad Tecnológica Nacional-Facultad Regional Córdoba. Este proyecto pretendía demostrar la factibilidad de utilizar fuentes láser y dispositivos de acoplamiento de carga (CCD) lineales para realizar mediciones de distancia por triangulación óptica. De acuerdo a lo propuesto, este prototipo está constituido por un "iluminador" láser (láser de HeNe), un sistema óptico (cámara fotográfica); el sistema detector consiste en un CCD controlado por un microcontrolador. Las salidas son un display donde se lee la distancia y una salida adicional vía RS 232. Luego de haber concretado el desarrollo del prototipo donde se demuestra la factibilidad del proyecto y del funcionamiento del telémetro láser, la presente propuesta consiste en realizar una optimización del mismo donde se desarrollarán y aplicarán nuevas tecnologías, a los efectos de concretar un telémetro láser aplicable a robótica. Objetivos Específicos En el presente proyecto se propone un medidor de distancias láser compacto que permita medir distancias entre unos centímetros y algunos metros. En particular, se pretende incorporarlo al proyecto "Plataforma autoguiada" presentado por el Grupo GIII de la UTN, como un sensor adicional ya que la medición exacta y confiable de la distancia es esencial para el desplazamiento inteligente del mismo. El dispositivo permitirá además otras aplicaciones aparte de la robótica. Fundamentalmente, en aquellas donde se deseen medir distancias pequeñas, sin contacto y con precisión. Se prevé una posible aplicación para la industria como "calibres sin contacto".

Estudio astrofísico de gigantes rojas y cúmulos estelares galácticos y extragalácticos

El conocimiento de las propiedades de los cúmulos estelares ha desempeñado y aún desempeña un papel fundamental en el desarrollo de la Astrofísica. Gran parte de lo que hoy sabemos acerca de la estructura y evolución de la Galaxia, e incluso acerca de la formación, estructura y evolución de las estrellas, proviene de una manera directa o indirecta del estudio de los cúmulos estelares, tanto sus propiedades globales, como las características individuales de sus miembros. Esto explica el interés del que suscribe en determinar y analizar las propiedades astrofísicas más relevantes de los miembros de los cúmulos estelares, como así también, los parámetros integrados de los mismos. En este sentido, el advenimiento de los detectores CCD permite en la actualidad extraer más y mejor información de los cúmulos estudiados. La precisión de la fotometría CCD es significativamente superior a la obtenida a partir de la fotometría fotográfica, tradicionalmente usada para estudios de cúmulos en gran escala. Usando fotometría CCD es posible derivar parámetros fundamentales de cúmulos muy compactos, cuyo estudio sería prácticamente imposible a partir de las técnicas tradicionales. Por su parte, la espectroscopía CCD es fundamental para determinar la abundancia de elementos pesados de cúmulos estelares, particularmente de aquéllos muy débiles ubicados en campos muy poblados de la Galaxia. El proyecto consiste básicamente en la obtención de datos fotométricos y espectroscopio de alta precisión de cúmulos estelares (abiertos y globulares) galácticos y extragalácticos. Dicho datos serán utilizados para: a) determinar parámetros físicos integrados de cúmulos abiertos y globulares, y propiedades individuales fundamentales de gigantes rojas pertenecientes a los mismos; b) estudiar la estructura y evolución química del disco galáctico. c) establecer el límite superior de edad de los cúmulos estelares se la Nube Mayor de Magallanes.

Determinación química del aceite esencial de Schinus areira L. (Aguaribay) y su actividad antioxidante.

INTRODUCCIÓN: Durante su evolución, las plantas han desarrollado un sistema químico de defensa con el fin de combatir el estrés del medio ambiente utilizando sus metabolitos secundarios. De todos los productos químicos secundarios sintetizados por las plantas, los terpenos han contribuido significativamente al desarrollo de nuevos compuestos y son producidos por una gran variedad de plantas, algunos animales (insectos y organismos marinos) y microorganismos. Son abundantes en frutas, cereales, verduras y flores, en musgos, algas y líquenes y son un componente importante de las resinas de las plantas, constituyendo uno de los grupos más amplios de fitonutrientes. Los terpenos son los principales componentes de los aceites esenciales de las plantas aromáticas y tienen gran actividad biológica y actúan como antioxidantes protegiendo los lípidos del ataque de radicales libres de especies del oxígeno, como oxígeno singlete, y radicales hidroxilo, peróxido y superóxido. OBJETIVO GENERAL. Determinar la composición química del aceite esencial de S. areira y la actividad anti-oxidante de la fracción rica en terpenos hidrocarburos y sus componentes mayoritarios, en un modelo experimental de pulmón de ratón. OBJETIVOS ESPECÍFICOS: a) Obtener el aceite esencial a partir de hojas de S. areira; b) Identificar y cuantificar los terpenos presentes en el aceite esencial de S. areira; c) Separar la fracción mayoritaria del aceite esencial (AE) (terpenos hidrocarburos); d)Detectar a nivel pulmonar los posibles efectos anti-oxidante de la administración intraperitoneal (i.p.) de la fracción de hidrocarburos obtenidas del aceite esencial de S. areira y de sus componentes mayoritarios, en un modelo inflamatorio. MATERIALES Y METODOS: 1) Obtención de las muestras de S. areira: Serán recolectada en la localidad de Mendiolaza, Córdoba. Un ejemplar de la misma será depositado en el Museo Botánico de la Fac. Cs. Ex. Fís. y Nat., UNC.2) Obtención del AE: El material vegetal será obtenido por destilación por arrastre por vapor de agua en un equipo tipo Clevenger modificado. 3) Fraccionamiento AE: Se separará la fracción mayoritaria del aceite que corresponde a la de los terpenos hidrocarburos con el fin de determinar su actividad biológica. Dicha separación se llevará a cabo por cromatografía en placa delgada (CCD) utilizando n-hexano o cloroformo como sistema de solvente para la fase móvil. También se determinará la actividad de los compuestos mayoritarios, los cuales serán obtenidos de muestras comerciales (ICN Pharmaceuticals) y para el caso de los que no estén disponibles en el comercio, serán aislados por técnicas cromatográficas. 4) Identificación y cuantificación de los terpenos del AE:Para la cuantificación de los terpenos, se realizará un análisis por cromatografía gas-liquido-espectrometría de masas (GC-MS) empleando un equipo Perkin Elmer Q600 equipado con detector de ionización de llama, con una columna capilar Elite-wax (Crossband-PEG) (60m x 0. 25 mm ID x 0. 25 µm df). La interpretación de los espectros de masas se realizará utilizando una biblioteca Adamns, NIST y por comparación con espectros similares tomados de bibliografía. 5) Inducción de inflamación con LPS y tratamiento con una fracción del AE de S. areira: Se procederá a la instilación nasal de LPS (1,67µg/Kg de peso corporal) y a las 2hs, la administración intraperitoneal de la fracción hidrocarbonada de AE (300 mg/Kg) y se determinará a las 3hs: TNF-α; infiltrado celular y dienos conjugados en muestras obtenidas en lavado bronqueo-alveolar en pulmón de ratón. 6) Genotoxidad: Se utilizará Allium cepa L. para evaluar aberraciones cromosómicas. Estadística : Se analizarán los datos con ANAVA: no paramétrico con Kruskal Wallis y Dunn a posterior (InfoStat, 2010). De los resultados se espera obtener un perfil químico de los terpenos hidrocarbonados de S. areira y evaluar su posible acción antioxidante.

Transfer of radionuclides from soil to vegetation in selected Irish ecosystems

This thesis details the findings of a study relating the transfer of 238U, 228Ra (232Th), 226Ra, and 137Cs from soil to vegetation in an Atlantic blanket bog, upland blanket bog and semi-natural grassland situated along the north-west coast of Ireland. The results of this study provide information on the uptake of these radionuclides by the indigenous vegetation found present in these ecosystems. The ecosystems chosen are internationally recognizable ecosystems and provide a wide variety of vegetation species and contrasting soil physiochemical properties which allow the influence of these parameters on radionuclide uptake to be assessed. The levels of radionuclides in the soil and vegetation were measured using gamma spectrometry, alpha spectrometry and ICP-MS. The nutrient status of the vegetation and soil physiochemical properties were measured using atomic absorption, flame photometry and other analytical techniques. The results of the study indicate that the uptake of 238U and 228Ra (232Th) by vegetation from all three ecosystems was negligible as the levels in all vegetation was below the limits of detection for the methods used in this study. These results appear to indicate that the vegetation studied do not possess the ability to accumulate significant levels of these radionuclides however this assumption cannot be upheld in the case of the Atlantic blanket bog as the levels in the soil of this ecosystem were too low for detection. Similar results were obtained for 226Ra uptake in both the Atlantic blanket bog and grassland for all vegetation with the exception of H. lanatus from the grassland ecosystem. Radium-226 uptake in upland blanket bog was higher and was detectable in the majority of vegetation indigenous to this ecosystem. Transfer factor values ranged from 0.07 to 2.35 and the TF values for E. tetralix were significantly higher than all other vegetation studied. This species of heather demonstrated the ability to accumulate 226Ra to a greater extent than all other vegetation. The uptake of 226Ra by upland blanket bog vegetation appears to be significantly influenced by a range of soil physiochemical properties. The nutrient status of the vegetation, in particular the calcium content in the vegetation appears to have a negative impact on the uptake of this radionuclide. Potassium-40 was detectable in all vegetation present in the three ecosystems and the levels in the grassland soil were significantly higher than the levels in both bogland soils. Transfer factor values for Atlantic blanket bog vegetation ranged from 0.9 to 13 .8 and were significantly higher in E. vaginatum in comparison to C. vulgaris. Potassium-40 TF values for upland blanket bog vegetation on average ranged from 1.4 for C. vulgaris (stems) to 5.2 for E. vaginatum and were statistically similar for all species of vegetation. Transfer factor values for grassland vegetation ranged from 0.7 to 3.8 and were also statistically similar for all species of vegetation indicating that the transfer of 40K to vegetation within the upland bog and grassland ecosystem is not dependent on plant species. Comparisons of 40K TF values for all three ecosystems indicate that the uptake in E. vaginatum from the Atlantic blanket bog was statistically higher than all other vegetation studied. This appears to indicate that E. vaginatum has the ability to accumulate 40K, however, this species of vegetation was also present in the upland blanket and did not demonstrate the same behaviour. The uptake of 40K by vegetation from all three ecosystems was significantly affected by a range of soil physiochemical properties and in some cases the results were contradictory in nature possibly indicating that the affect of these parameters on 40K uptake is species dependent. The most obvious trend in the data was the influence of soil CEC and magnesium levels in vegetation on 40K TF values. A positive correlation was apparent between the CEC of the soil and 40K uptake in vegetation from both the Atlantic blanket bog and grassland ecosystem. A similar trend was apparent between magnesium levels in vegetation and 40K TF values for the upland blanket bog and grassland vegetation. Caesium-13 7 levels were found to be significantly higher in the two bogland soils in comparison to the grassland soil and levels of 137Cs decreased with increasing soil depth. Transfer factor values for Atlantic blanket bog vegetation ranged from 1.9 to 9.6 and TF values were significantly higher in the leaves o f C. vulgaris in comparison to all other vegetation from this ecosystem. Caesium-13 7 TF values for the upland blanket bog vegetation on average ranged from 0.29 for E. tetralix to 1.6 for C. vulgaris. Uptake by the leaves of C. vulgaris was significantly higher than all other vegetation present thereby supporting the trend found within the Atlantic blanket bog vegetation. These results appear to indicate that the leaves of C. vulgaris have the ability to accumulate significant quantities of 137Cs and also that the uptake of 137Cs by this vegetation is dependent on plant compartment as the stems of this vegetation contained significantly lower levels than the leaves in both ecosystems. The uptake of 137Cs by grassland vegetation was very low and was only detectable in a fraction of the vegetation sampled. Caesium-137 TF values for grassland vegetation were in general lower than 0.02. The impact of soil physiochemical properties and nutrient status of vegetation on 137Cs uptake by vegetation appears to be complex and in some cases contradictory. The most apparent trend in the data was the positive influence of vegetation nutrients on 137Cs uptake in particular the magnesium levels present in the vegetation and to a lesser extent the calcium levels present. The results in general indicate that the uptake of 226Ra, 40K and 137Cs by the chosen vegetation is varied and complex and is significantly dependent on the species of vegetation, soil radionuclide concentration, soil physiochemical properties and the nutrient status of the vegetation.

Instrumentation and software for the VERITAS Project and the detection of TeV Gamma-Ray Emission from the BL Lacertae Object 1ES1959+650

Transmission of Cherenkov light through the atmosphere is strongly influenced by the optical clarity of the atmosphere and the prevailing weather conditions. The performance of telescopes measuring this light is therefore dependent on atmospheric effects. This thesis presents software and hardware developed to implement a prototype sky monitoring system for use on the proposed next-generation gamma-ray telescope array, VERITAS. The system, consisting of a CCD camera and a far-infrared pyrometer, was successfully installed and tested on the ten metre atmospheric Cherenkov imaging telescope operated by the VERITAS Collaboration at the F.L. Whipple Observatory in Arizona. The thesis also presents the results of observations of the BL Lacertae object, 1ES1959+650, made with the Whipple ten metre telescope. The observations provide evidence for TeV gamma-ray emission from the BL Lacertae object, 1ES1959+650, at a level of more than 15 standard deviations above background. This represents the first unequivocal detection of this object at TeV energies, making it only the third extragalactic source seen at such levels of significance in this energy range. The flux variability of the source on a number of timescales is also investigated.

Regulation of blood pressure and renal function by NCC and ENaC: lessons from genetically engineered mice.

The activity of the thiazide-sensitive Na(+)/Cl(-) cotransporter (NCC) and of the amiloride-sensitive epithelial Na(+) channel (ENaC) is pivotal for blood pressure regulation. NCC is responsible for Na(+) reabsorption in the distal convoluted tubule (DCT) of the nephron, while ENaC reabsorbs the filtered Na(+) in the late DCT and in the cortical collecting ducts (CCD) providing the final renal adjustment to Na(+) balance. Here, we aim to highlight the recent advances made using transgenic mouse models towards the understanding of the regulation of NCC and ENaC function relevant to the control of sodium balance and blood pressure. We thus like to pave the way for common mechanisms regulating these two sodium-transporting proteins and their potential implication in structural remodeling of the nephron segments and Na(+) and Cl(-) reabsorption.

Clinical use of temporary percutaneous left ventricular assist devices.

Background: Temporary percutaneous left ventricular assist devices (TPLVAD) can be inserted and removed in awake patients. They substitute left ventricular function for a period of up to a few weeks and provide an excellent backup and bridge to recovery or decision. Methods: Retrospective analysis of 75 patients who received TPLVAD to treat cardiogenic shock (n = 49) or to facilitate high-risk percutaneous coronary intervention (PCI) (n = 26). Forty-two patients with cardiogenic shock and 16 patients with high-risk PCI received a TandemHeart and 7 patients and 10 patients, respectively, received an Impella Recover LP 2.5. Outcome and related complications up to 1 month are reported with reference to device depending function. Results: One-month survival was 53% in patients with shock and 96% in patients with PCI. Conclusion: TPLVADs can support the failing heart with acceptable risk. Outcome is better in prophylactic use than in patients with cardiogenic shock. (C) 2011 Wiley-Liss, Inc.