Análise da influência da concentração de feixeis de fibras de bambu em ensaios de piso

Bamboo has one of the highest growth rates among plants, however, its lignifications (which confers resistance) takes around a few years and, therefore, certain physical characteristics and mechanical, that depend on this process will only be acquired between the three to six years old. In addition, bamboo also has significant density variations in different parts of the stem, both in the radial direction as the axial. In particular the radial direction, where the density found in the inner and outer (near the bark) of a single stem can range on average from 0.5 to 0.9 g/cm3. Thus, the application of bamboo as a floor, there to examine whether both sides of the bamboo (internal and external), provide resistance properties required for that purpose. In this study sought to characterize and quantify the influence of the concentration of fiber bundles in the inner and outer sides of rules or bamboo strips of bamboo flooring through testing service. Analyses performed were based on ASTM D 2394- 83 for wooden floors and derivatives. This was necessary because of the absence of a specific prohibition of the use and testing of floors made of bamboo and its products. The data were analyzed by ball indentation test shooting, test for resistance to abrasion, indentation test for stress / load treadmill test and by indentation loads applied to small areas - test the jump. The results of the tests were extremely friendly bamboo, even this presents considerable differences between the resistances obtained from assay of the cover of the inner and outer face, being comparable with those of many commonly used to manufacture wood flooring. This comparison was made possible by information from technical trials of several floors made with wood

Estudo de compósitos de madeira com reforço em bambu para utilização em mobiliário

Bamboo has been studied because of its peculiar mechanical properties and numerous possibilities of use, besides being a fast-growing grass and short cutting cycle. This study aimed to analyze the mechanical characteristics of wood-bamboo composite material, where the samples were developed from the combination of layers of bamboo as a structural reinforcement in solid pieces of pine and EGP panel parts. The species of wood used was Pinus taeda, and the bamboo species Guadua angustifolia and Dendrocalamus giganteus. All work was conducted at the Universidade Estadual Paulista - UNESP in the laboratory of Physical and Mechanical Properties of Wood. Tests including the density and tension parallel to grain of the bamboo species used and the static bending of composites in order to use this in the furniture industry. For the tests have been used as a basis the requirements of the normative document NBR 7190/97. The values obtained in the tests showed a significant increase in strength and stiffness compared to unreinforced parts, where there was an increase in MOE and MOR in static bending in all specimens used in evidence. The results showed the possibility of reducing sections in furniture components and the possibility of improving the mechanical properties of parts with defects found in wood of Pinus Itapeva region of São Paulo

Nova configuração de um reator compartimentado anaeróbio/aeróbio para o tratamento de esgoto sanitário de baixa carga

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Parâmetros indicativos para qualidade da água em nascentes com diferentes coberturas de terra e conservação da vegetação ciliar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Regeneração natural do componente arbóreo após a mortalidade de um maciço de taquara em um fragmento de floresta ombrófila mista em Lages - SC

The present study aimed to analyze the floristic and structural descriptors of tree species natural regeneration in a forest sector with synchronized bamboo (Merostachys multiramea Hackel) die-off (CT) and an adjacent area with continuous canopy cover (ST) in an araucaria forest fragment in the municipality of Lages, Santa Catarina state. A total of 14, 5x5m, plots (six plots in CT sector and eight in ST sector) were allocated, where all tree species regenerative individual with circumference at breast height smaller than 15cm and height higher than 25cm was measured (diameter at soil level) and identified. The richest families were: Myrtaceae (nine), Solanaceae (six) and Aquifoliaceae (four). The Shannon Diversity Index in ST and CT sectors were respectively 2.73 and 2.31. The species with the highest importance values in CT sector were Solanum variabile, Piptocarpha angustifolia, Mimosa scabrella, Jacaranda puberula and Solanum pseudoquina. In ST sector, the species with highest importance values were Myrsine lorentziana, Casearia decandra, Cinnamodendron dinisii, Drimys brasiliensis and Ilex paraguariensis. The results showed that the synchronized bamboo die-off influenced the spatial variation in the floristic and structural descriptors of the tree species natural regeneration.

Community-wide spatial and temporal discordances of seed-seedling shadows in a tropical rainforest

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação farmacognóstica qualitativa das folhas do vegetal Bambusa textilis

Introduction: Bamboos belong to the family Graminae, Bambusoidae subfamily, represented by about 1,250 species worldwide. Originally employed in construction and power, are currently the subject of investigations related to its therapeutic properties in neoplasms. The main species used for therapeutic purposes based on popular knowledge are: Phyllostachys nigra; Bambusa breiflora; tuldoides Bambusa textilis and Bambusa. The literature on the therapeutic action of bamboo species is scarce, but recent studies report a promising effect in the treatment of cancer and other chronic diseases. Objective: This study aimed to evaluate qualitatively the phytochemical composition of plant extract obtained from the leaves of the bamboo species Bambusa textilis, comparing this composition from vegetable leaves with 18 and 24 months of age. Methodology: After collecting plant leaves with 18 or 24 months, they were identified and submitted to drying and milling. For qualitative analysis of its components were employed methods of macroscopic evaluation (mucilage), method of benzoin (resin), reaction Shinoda (flavonoids), reaction with gelatin solution (tannins), boiling and foaming (saponins) and jobs of reactive Wagner, Bertrand, Dragendorff, Mayer, picric acid and tannic acid (alkaloids) (Biavatti; MILK, 2007). Results: in the youngest leaves were found positive for alkaloids, flavonoids, resins and saponins. In the leaves of the plant with 24 months were found only alkaloids flavonoids and resins. Conclusion: the composition of vegetable substances were found associated with a significant therapeutic potential difference and the phytochemical composition in comparison with plant leaves 18 or 24 months. Additional studies are needed to quantify these components, as well as the clarification of its action in the fight against cancer and chronic diseases.

Utilização das tecnologias assistidas na concepção, no desenvolvimento e no projeto de uma escova dental sustentável e ergonômica

The toothbrush is identified as one of the most importants inventions in human history. Most of them are made by polypropylene, a recyclable polymer. Some are made of polypropylene and polyethylene leftovers from others industrial processes. However, the toothbrushes are discarded incorrectly and end up in landfills, which could be avoided by using a material and design suitable for the manufacture of the product. This study aimed, based on research, develop and design a toothbrush model with great features. For the conception of the prototype, was used rapid prototyping technologies. With the intention of improving the product quality, was created an ergonomic, sustainable and environmentally friendly model, seeking maximally reduce the generation of waste and environmental damages. The solution adopted was the use of "interchangeable head", which can be discarded after their useful life, keeping the rest of the body.

Physical characterization of particleboard produced with waste from ethanol and sugar mill

The problem of proper disposal of solid waste generated in different industrial processes is one of worldwide environmental concerns nowadays. Thus, this study aimed to establish a new alternative for the disposal of two agro-industrial residues employing them to produce particleboard for different purposes in building construction. The focus was given to the reuse of the sugarcane bagasse (SB) originated during the processing of Saccharum officinarum for sugar and ethanol production, and bamboo stem leaves of Dendrocalamus giganteus(BB). For this, six particleboards were produced in the following compositions: with 100% SB, 75% SB + 25% BB, 50% SB+50% BB, 40% SB +60 BB, 25% SB+ 75% BB and 100% BB in the total mass of the composites. The particleboards physical characterization followed Brazilian Standard ABNT NBR 14810-3 to density, moisture content and water absorption. Results showed these raw materials are compatible to particleboard production.

O uso do bambu laminado colado na confecção de mobiliário

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Characterization of medium density particleborads using agricultural residues

In recent years the production of products derived from wood and bamboo are increasing, due to the search for a more rational exploitation of these raw materials. Amongst these products, the particleboards production combine sustainability and rationality in the use of these materials. In this context, this work has the objective to study the application of alternative raw materials in the manufacture of Medium Density Particleboards (MDP), using residues from industrial processimg of coffee and bamboo. MDP had been produced with particles of giganteus bamboo of the Dendrocalamus species and particle of coffee rind in the intermediate layer of the particleboard, bonded with polyurethane resin based on castor oil. The physical and mechanical characterization was carried out accordingly to NBR 14810-3 (2006). The physical properties evaluated were: of water absorption for 2h and 24h; thickness swallowing for 2h and 24h; density, humidity content. The mechanical properties evaluated were: Tensile strength, static bending (MOR and MOE). The results were compared with NBR 14810-2 (2006) and also with the ANSI A208-1 (1993). The physical performance of these particleboards was below the values recommend by the Brazilian norm. Also the mechanical characteristics are not improve, demonstrating that the inclusion of coffee rind did not benefit the physical characteristics and nor the mechanical ones. However it can be used as construction materials for partitions and ceiling panels.

Characterization of medium density particleboards using agricultural residues

In recent years the production of products derived from wood and bamboo are increasing, due to the search for a more rational exploitation of these raw materials. Amongst these products, the particleboards production combine sustainability and rationality in the use of these materials. In this context, this work has the objective to study the application of alternative raw materials in the manufacture of Medium Density Particleboards (MDP), using residues from industrial processimg of coffee and bamboo. MDP had been produced with particles of giganteus bamboo of the Dendrocalamus species and particle of coffee rind in the intermediate layer of the particleboard, bonded with polyurethane resin based on castor oil. The physical and mechanical characterization was carried out accordingly to NBR 14810-3 (2006). The physical properties evaluated were: of water absorption for 2h and 24h; thickness swallowing for 2h and 24h; density, humidity content. The mechanical properties evaluated were: Tensile strength, static bending (MOR and MOE). The results were compared with NBR 14810-2 (2006) and also with the ANSI A208-1 (1993). The physical performance of these particleboards was below the values recommend by the Brazilian norm. Also the mechanical characteristics are not improve, demonstrating that the inclusion of coffee rind did not benefit the physical characteristics and nor the mechanical ones. However it can be used as construction materials for partitions and ceiling panels.

Propriedades físico-mecânicas de painéis de mdp (medium density particleboard) constituído de bambu e fibra de coco

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vibração de plantas de pimenta Malagueta para produção de frutos e sementes em ambiente protegido

This study aimed to verify the effect of vibration of plants in the production of fruits and seeds and in the physiological quality of the seeds of the “Malagueta” pepper in a protected cultivated area with open and closed sides. The experiment was conducted at the Experimental Farm of the School of Agronomic Sciences of Universidade Estadual Paulista (FCA/UNESP), located in the city of São Manuel (SP). Two treatments were carried out, which consisted of plants that did and did not undergo vibration. Plants were vibrated manually by swinging the wire attached to the supporting bamboo for about 5 seconds, twice a day for 11 weeks. The design was a randomized block with six repetitions. The same experiment was conducted in two protected environments, with and without anti-aphids screens on the sides, cultivated in the same season. For the comparison of environments, a combined analysis was performed considering each environment as a separate experiment. The characteristics evaluated were: weight and number of fruits per plant; weight, diameter and length of fruit; weight and amount of seeds per fruit; and plant height. For the analysis of seed quality, the characteristics evaluated were: germination percentage; first count of germination; dry matter of seedlings; seedling emergence in substrate; and seedling emergence speed index. Regardless of the environment, vibration affects the physiological quality of seeds. The presence of pollinator insects benefited the production and quality of “Malagueta” pepper seeds and increases the fruit weight.