Proposta de método para avaliação do desempenho térmico de residências unifamiliares em clima quente e úmido

Nowadays, evaluation methods to measure thermal performance of buildings have been developed in order to improve thermal comfort in buildings and reduce the use of energy with active cooling and heating systems. However, in developed countries, the criteria used in rating systems to asses the thermal and energy performance of buildings have demonstrated some limitations when applied to naturally ventilated building in tropical climates. The present research has as its main objective to propose a method to evaluate the thermal performance of low-rise residential buildings in warm humid climates, through computational simulation. The method was developed in order to conceive a suitable rating system for the athermal performance assessment of such buildings using as criteria the indoor air temperature and a thermal comfort adaptive model. The research made use of the software VisualDOE 4.1 in two simulations runs of a base case modeled for two basic types of occupancies: living room and bedroom. In the first simulation run, sensitive analyses were made to identify the variables with the higher impact over the cases´ thermal performance. Besides that, the results also allowed the formulation of design recommendations to warm humid climates toward an improvement on the thermal performance of residential building in similar situations. The results of the second simulation run was used to identify the named Thermal Performance Spectrum (TPS) of both occupancies types, which reflect the variations on the thermal performance considering the local climate, building typology, chosen construction material and studied occupancies. This analysis generates an index named IDTR Thermal Performance Resultant Index, which was configured as a thermal performance rating system. It correlates the thermal performance with the number of hours that the indoor air temperature was on each of the six thermal comfort bands pre-defined that received weights to measure the discomfort intensity. The use of this rating system showed to be appropriated when used in one of the simulated cases, presenting advantages in relation to other evaluation methods and becoming a tool for the understanding of building thermal behavior

Utilização de um aplicativo de simulação computacional na avaliação de desempenho térmico de protótipo de habitação de interesse social (his)

This Masters Degree dissertation seeks to make a comparative study of internal air temperature data, simulated through the thermal computer application DesignBuilder 1.2, and data registered in loco through HOBO® Temp Data Logger, in a Social Housing Prototype (HIS), located at the Central Campus of the Federal University of Rio Grande do Norte UFRN. The prototype was designed and built seeking strategies of thermal comfort recommended for the local climate where the study was carried out, and built with panels of cellular concrete by Construtora DoisA, a collaborator of research project REPESC Rede de Pesquisa em Eficiência Energética de Sistemas Construtivos (Research Network on Energy Efficiency of Construction Systems), an integral part of Habitare program. The methodology employed carefully examined the problem, reviewed the bibliography, analyzing the major aspects related to computer simulations for thermal performance of buildings, such as climate characterization of the region under study and users thermal comfort demands. The DesignBuilder 1.2 computer application was used as a simulation tool, and theoretical alterations were carried out in the prototype, then they were compared with the parameters of thermal comfort adopted, based on the area s current technical literature. Analyses of the comparative studies were performed through graphical outputs for a better understanding of air temperature amplitudes and thermal comfort conditions. The data used for the characterization of external air temperature were obtained from the Test Reference Year (TRY), defined for the study area (Natal-RN). Thus the author also performed comparative studies for TRY data registered in the years 2006, 2007 and 2008, at weather station Davis Precision Station, located at the Instituto Nacional de Pesquisas Espaciais INPE-CRN (National Institute of Space Research), in a neighboring area of UFRN s Central Campus. The conclusions observed from the comparative studies performed among computer simulations, and the local records obtained from the studied prototype, point out that the simulations performed in naturally ventilated buildings is quite a complex task, due to the applications limitations, mainly owed to the complexity of air flow phenomena, the influence of comfort conditions in the surrounding areas and climate records. Lastly, regarding the use of the application DesignBuilder 1.2 in the present study, one may conclude that it is a good tool for computer simulations. However, it needs some adjustments to improve reliability in its use. There is a need for continued research, considering the dedication of users to the prototype, as well as the thermal charges of the equipment, in order to check sensitivity

Avaliação do desempenho do aço D6 tratado termicamente e netretado em plasma com gaiola catódica visando aplicação industrial

In this research there was an evaluation of the best conditions of nitriding in plasma within a cathodic cage at an atmosphere of 80% N2-20%H2 in samples of tool manganese steel AISI D6, cold working, treated thermally in the following conditions: tension relief, treated thermally to temperature of maximum heat, temperate heat and temperate and temperate heat. A pressure of 2.5mbar and temperatures of 400 and 300ºC com treatment time of two and three hours were used to evaluate its performance as cutting tool (punch) of bicycle backs. Hardness, micro-structural aspects (layer thickness, interface, grain size etc), and crystal phases on the surface were appraised. When treated to tension relief, thermally treated to maximum heat temperature, temperature and temperate heat, the samples presented hardness levels of 243HV, 231HV, 832HV, and 653HV, respectively. The best nitrification conditions were: four hours and 300ºC for heat samples. A superficial hardness of 1000HV and a 108µm thickness for the nitrided layer were found in these samples

Avaliação do desempenho do aço AISI D2 tratado termicamente e nitretado em plasma com gaiola catódica visando aplicação industrial

In the research, steel samples tool AISI D2, treated thermally, in the conditions: relief of tension, when maximum, seasoned and seasoned was treated thermally in the temperature of revenimento and revenida had been nitrited in plasma with cathodic cage, in atmosphere of 80%N2:20%H2. One used pressure of 2,5 mbar, 400 and 480°C temperatures with treatment time of 3 and 4 hours, with the objective to evaluate its performance in pipes cut tool. It was compared that the performance of the same steel when only thermally treated, both with tension relief. It was evaluated its hardness. Microstructural aspects (the layer thickness, interface, graisn size, etc) and crystalline phases on the surface. Besides, it was verified accomplishment possibility of nitriding simultaneous to annealing treatment. The tempering samples had presented hardness levels of 600 HV, while in nitrited samples these values had been 1100 HV

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Avaliação do desempenho funcional de crianças com paralisia cerebral de acordo com níveis de comprometimento motor

Contextualization: Several studies have examined the mobility of this group of children, however little is known about the impact of motor function in activities of daily living, considering the seriousness of their neuromotor damage. Objective: Identify the functional differences of children with Cerebral Palsy with different levels of motor dysfunction and correlate these differences with the areas of mobility, self-care and social function in functional ability and caregiver´s assistance of these children. Methods: An l analytical cross-section search was developed, which were part 70 children / families aged from 4 to 7.5 years, in the Rehabilitation Center for Children. As tools were used the Pediatric Evaluation Disability Inventory (PEDI) and the Gross Motor Function Classification System (GMFCS). Data analysis was performed by ANOVA and Pearson's correlation tests. Results: The results show the functional variability of children CP in different severity levels of motor disfunction This variation was observed in the areas of mobility, self-care and social function. The results also showed a strong correlation between the domains mobility and self-care, mobility and social function. Conclusions: The variability shown by the children with CP, suggests the use of PEDI and GMFCS as this association appears to increase the understanding of how the gross motor functions are related to activities of daily living, describing the best commitments and their degree of impact on functional activities. This correlation demonstrates how mobility is crucial to evaluate the performance and guide the therapeutic practice, to develop the children´s potencial, and guide the caregiver in stimulation

Avaliação do desempenho de bicos para aplicação de herbicidas

A avaliação do desempenho de barras de pulverização pode ser feita a partir do padrão de distribuição ou deposição do líquido de cada bico individual em mesa de prova. Neste trabalho comparam-se os padrões de deposição produzidos por diversos bicos em várias alturas. Os resultados mostraram melhores desempenho para os bicos TF e XR, seguidos pelos bicos TJ60-8010, TJ60-8006 e FL. Os bicos TJ60-11006 e os TQ mostraram problemas localizados e os bicos TK foram considerados os piores entre os testados. Relações entre o espaçamento entre bicos e altura do alvo para as quais os coeficientes de variação apresentam valores satisfatórios foram propostas.

Avaliação do desempenho reprodutivo do Cavalo-Marinho Hippocampus reidi (GINSBURG 1933) do estuário do Rio Potengi (Rio Grande do Norte, Brasil) com vistas ao seu cultivo em bases sustentáveis

Os cavalos-marinhos têm cativado a imaginação e a curiosidade dos seres humanos por centenas de anos. No entanto, nos dias de hoje, esses animais correm um sério risco de extinção por fatores como a pesca desordenada para suprir os mercados de peixes ornamentais e da medicina tradicional chinesa e principalmente, a destruição do seu habitat. Nesse contexto, é crescente o número de estudos sobre a ecologia, a biologia (reprodutiva, especialmente) e o cultivo de várias espécies do gênero Hippocampus, inclusive para fins conservacionistas e de recomposição de estoques. Duas espécies de cavalos-marinhos são encontradas no Brasil: Hippocampus reidi Ginsburg 1933 e Hippocampus erectus Perry. No entanto, as informações sobre essas espécies estão basicamente restritas ao seu grau de ocorrência ou a sua área de ocupação. No presente estudo, foi avaliado o desempenho reprodutivo de Hippocampus reidi do estuário do rio Potengi (05° 47' 42'' S; 35° 12' 34'' W), em Natal, Rio Grande do Norte. Para tanto, cavalos-marinhos grávidos (n = 38) foram coletados no referido estuário nos meses de setembro, outubro e novembro de 2008 e julho, agosto, setembro e outubro de 2009 e mantidos em laboratório até que liberassem os filhotes. O comprimento padrão (CPA), altura (ATA), volume da bolsa (VB) e peso úmido (PuA) dos adultos, bem como o comprimento padrão (CPF), altura (ATF), peso úmido (PuF) e peso seco (PsF) dos filhotes foram determinados. Os resultados obtidos mostraram que houve correlações significativas entre o CPA e a ATA (r²=0,171), CPA e PuA (r²=0,624), CPA e VB (r²=0,256), ATA e PuA (r²=0,788), PuA e VB (r²=0,211), CPF e ATF (r²=0,903) e CPF e PsF (r²=0,163). A análise de correspondência (AC) que associou as classes do comprimento padrão dos adultos (CPA) e o volume da bolsa de H. reidi ao número de filhotes mostrou que animais entre 19 cm e 21 cm e com volume de bolsa entre 3 mL e 4 mL foram os que liberaram o maior número de filhotes. Os resultados do presente estudo também indicam que o tamanho mínimo de captura recomendado pela CITES (10 cm de altura) para H. reidi deve ser revisto, uma vez que não foram encontrados animais menores que 13,5 cm que estivessem grávidos. Finalmente, o número médio de filhotes por desova obtido no presente estudo (n = 775 ± 398 filhotes) realçou o potencial reprodutivo de H. reidi e a necessidade de estudos adicionais com esta espécie

Avaliação do Desempenho e Excreção de Cálcio em Duas Linhagens de Frangos de Corte, na Fase Inicial, Alimentados com Diferentes Níveis de Aminoácidos e de Cálcio

Dois experimentos foram realizados com o objetivo de avaliar os efeitos de diferentes níveis de aminoácidos e de cálcio sobre o desempenho e excreção de cálcio de duas linhagens de frangos de corte (Cobb e Avian Farms) na fase inicial de criação. Foram avaliados os dados de desempenho (consumo de ração, ganho de peso e conversão alimentar) e excreção de cálcio. Foram utilizadas 540 aves, em cada experimento, distribuídas em delineamento inteiramente casualizado, em esquema fatorial 3x2, ou seja, 3 perfis de aminoácidos (metionina, metionina+cistina, lisina e treonina - 100%, 125% e 150% dos níveis do NRC,1994) e 2 níveis de cálcio (75% e 100% dos níveis do NRC,1994), com 30 aves por repetição. Analisou-se o cálcio excretado das aves, e para tanto, utilizou-se 72 aves, em cada experimento, alojadas em gaiolas, seguindo o mesmo delineamento descrito anteriormente. Não houve interação entre os tratamentos estudados. Para a linhagem Avian Farms, o ganho de peso diminuiu com a elevação dos níveis de aminoácidos e ocorreu menor excreção de cálcio com menor nível de cálcio da dieta. A linhagem Cobb não foi influenciada pelos tratamentos em nenhum dos parâmetros estudados.

Avaliação do desempenho de uma cortina de estacas espaçadas, atirantada, em areia

It is presented the analysis of a retaining wall designed for the basement of a residential building, located in Natal/RN, which consists in a spaced pile wall, anchored by tiebacks, in sand. This structure was instrumented in order to measure the wall s horizontal movements and the load distribution throughout the anchor fixed length. The horizontal movements were measured with an inclinometer, and the loads in the anchors were measured with strain gages, installed in three places throughout the anchor fixed length. Measurements for displacement were done right after the implementation of each stage of the building and right after the conclusion of the building, and the measurements for loads in the anchors were done during the performance test, at the moment of the locking off and, also, right after the conclusion of the building. From the data of displacement were obtained velocity and acceleration data of wall. It was found that the time elapsed on braced installation was decisive in the magnitude of the displacements. The maximum horizontal displacement of wall ranged between 0,18 and 0,66% of the final depth of excavation. The loads in the anchors strongly reduced to approximately half the anchor fixed length, followed an exponential distribution. Furthermore, it was found that there was a loss of load in the anchors over time, reaching 50% loss in one of them

Desenvolvimento de um equipamento para avaliação do desempenho de geomantas

O controle sobre os processos erosivos é uma necessidade constatada em vários segmentos da engenharia. A movimentação de terra necessária para a execução de taludes rodoviários, por exemplo, pode resultar em taludes de corte ou aterro vulneráveis à erosão superficial. Dentre as alternativas tecnológicas para controle de erosão a utilização de geossintéticos se apresenta como uma solução potencial. A referida aplicação encontra-se em amplo desenvolvimento em alguns países como, por exemplo, nos EUA. No Brasil, a especificação de geossintéticos para controle de erosão é limitada pela ausência de caracterização desses produtos e de normas nacionais, sendo a única fonte técnica de informação, os catálogos dos fabricantes. Neste contexto, o objetivo deste trabalho é construir um equipamento e desenvolver métodos de ensaio para caracterização e avaliação de geossintéticos utilizados no controle de erosão superficial, com base na ASTM D7101. Além de um simulador de chuvas, o equipamento é composto por uma bancada de testes formada por: rampa de escoamento, mesa de suporte e núcleos de solo. Utilizando a bancada construída, foram realizados ensaios para avaliar o funcionamento do equipamento e o desempenho de uma geomanta na redução da taxa de erosão superficial. Os ensaios foram realizados com intensidades de precipitação de 100 ± 4mm/h e 150 ± 4mm/h, durante 30 minutos, com intervalo de leitura de 5 minutos. Os resultados obtidos nos ensaios sem a presença da geomanta mostraram uma perda de solo acentuada durante as chuvas simuladas, com uma iv tendência de crescimento linear da perda de solo acumulada em função do tempo de ensaio. Nos ensaios realizados com a presença da geomanta observou-se a ação de proteção do geossintético com uma redução da ordem de 90% da perda de solo acumulada para todas as intensidades de chuvas utilizadas

Avaliação de desempenho em mercados reguladores de transporte urbano por ônibus :proposição de um modelo aplicável ao caso de Natal

Increased competition in the market of urban transport, characteristic of the Brazilian cities from years 90, has required actions of the managing agencies to ensure the universality of service, enhancing efficiency and consumer welfare. It grows in the Brazilian municipalities, the need to adopt a systematic performance evaluation in terms of management system of indicators and targets appropriate to the regulatory context, which has the purpose of evaluating the accomplishment and compliance by dealers, of the services granted during the contract period, marked by increasingly long periods. The introduction of an index operational performance in permission contracts/concession in urban buses is intended to establish a regulatory performance, giving the contract a pro-competitive feature and to allow the managing agency the systematic and continuous monitoring of the performance of the delegated service to avoid major deviations from desired performance. A performance assessment model of public transportation companies by bus, and applicable to the case of Natal is proposed. Sought to add the particularities found in the transport system in order to assess the performance of enterprises, contribute to improving the service quality to the population and enable decision-makers a detailed knowledge of the behavior of the licensees

Proposta de um modelo de medição e avaliação de desempenho como ferramenta de gest ão - um estudo de caso num órgão público

The public sector performance has received much attention in the literature and due to that the purpose of this work is to develop a proposal for a model of performance measurement for a higher education institution unit. First, we performed a theoretical research on public organizations and private institutions of higher education, followed by a literature review on performance measurement and evaluation. This review presents some performance models that are quite frequent in the literature: Total Quality Management (Total Quality Management) - TQM and the PDCA cycle, SMART System, Balanced Scorecard and Môdef Ouanturn. In order to verify the possibility of implementing a performance measurement model for Higher Education Institutions, it was conducted a case study in a support unit of a University, located in the city of Natal, RN, Brazil. The study attempted to identify the key processes of the unit and proposed by the use of Quantum model in order to improve the management and operation of the same. The work aims to contribute to the advancement of knowledge in measurement and performance evaluation in higher education institutions that where still lacks scientific production of this subject compared to other areas. This study also identifies better practices and opportunities for improvement in processes to determine the expected performance indicators to aid a decision-making unit.

Aplicando análise de envoltória de dados -DEA à avaliação de desempenho acadêmico: um estudo em programas de pós-graduação em engenharia mecânica e produção no Brasil

This Master of Science Thesis deals with applying DEA (Data Envelopment Analysis) to the academic performance evaluation of graduate programs in Brazil, exploring it on a Mechanical and Production Engineering Program 2001-2003 data. The data used is that of the national assessment carried by CAPES, the governmental body in charge for graduate program assessment and certification. It is used the CCR output oriented DEA model, the CCR-Output with Assurance Region, and Window Analysis. The main findings are first that the CCR has the concerning problem of zero values of weights of outputs that is not appropriate in a sense that a graduate program has the higher efficiency score zeroing some output (e.g., number of academic papers published). Secondly, the Assurance Region method proved useful. Third, the Window Analysis also gave some light to the consistency of the performance in the time frame analysed. Also, the analysis results in the understanding that the Mechanics and Production Engineering should not be assessed jointly like currently applied by CAPES and rather should be assessed in its own field separately. Finally, the result of the DEA analysis showed some serious inconsistencies with the CAPES method. Graduate programs considered excellent has got low performance score and vice versa. This Thesis provides a strong argument in order to use DEA at least as a complimentary methodology for graduate program performance evaluation in Brazil

Avaliação do desempenho ao primeiro parto de fêmeas Nelore e F1

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)