Retention behavior of hydrophobic organic chemicals as a function of temperature in soil leaching column chromatography

To study the transport mechanism of hydrophobic organic chemicals (HOCs) and the energy change in soil/solvent system, a soil leaching column chromatographic (SLCC) experiment at an environmental temperature range of 20-40 degreesC was carried out, which utilized a reference soil (SP 14696) packed column and a methanol-water (1:4 by volume ratio) eluent. The transport process quickens with the increase of column temperature. The ratio of retention factors at 30 and 40 degreesC (k'(30)/k'(40)) ranged from 1.08 to 1.36. The lower enthalpy change of the solute transfer in SLCC (from eluent to soil) than in conventional reversed-phase liquid chromatography (e.g., from eluent to C-18) is consistent with the hypothesis that HOCs were dominantly and physically partitioned between solvent and soil. The results were also verified by the linear solvation energy relationships analysis. The chief factor controlling the retention was found to be the solute solvophobic partition, and the second important factor was the solute hydrogen-bond basicity, while the least important factors were the solute polarizability-dipolarity and hydrogen-bond acidity. With the increase of temperature, the contributions of the solute solvophobic partition and hydrogen-bond basicity gradually decrease, and the latter decreases faster than the former. (C) 2002 Elsevier Science Ltd. All rights reserved.

Soil column chromatography for correlation between capacity factors and soil organic partition coefficients for eight pesticides

A soil column chromatographic method was developed to measure the capacity factors (k') of pesticides, in which soil acted as a stationary phase and methanol-water mixture as an eluent. The k' values of eight pesticides, including three insecticides (methiocarb, azinphos-methyl, fenthion), four fungicides (triadimenol, fuberidazole, tebuconazole, pencycuron), and one herbicide (atrazine), were found to be well fitted to a retention equation, ln k'=ln k(w)'-S-phi. Due to similar interactions of solutes with soil and solvent in both sorption determination and retention experiment, log k' has a good linear correlation with log K-oc for the eight pesticides from different classes, in contrast with poor correlation between log k' from C-18 column and log K-oc. So the method provides a tool for rapid estimation of K-oc from experimental k'. (C) 1999 Elsevier Science Ltd. All rights reserved.

Acid catalyzed synthesis of ordered bifunctionalized mesoporous organosilicas with large pore

Thiol-functionalized mesoporous ethane-silicas with large pore were synthesized by co-condensation of 1,2-bis(trimethoxy-sily)ethane (BTME) with 3-mercaptopropyltrimethoxysilane (MPTMS) using nonionic oligomeric polymer C1H (OCH(2)-CH(2))(10)OH (Brij-76) or poly(alkylene oxide) block copolymer (P123) as surfactant in acidic medium. The results of powder X-ray diffraction (XRD), nitrogen gas adsorption, and transmission electron microscopy (TEM) show that the resultant materials have well-ordered hexagonal mesoscopic structure with uniform pore size distributions. (29)Si MAS NNR, (13)C CP-MAS NMR. FT-IR, and UV Raman spectroscopies confirm the attachment of thiol functionalities in the mesoporous ethane-sificas. The maximum content of the attached thiol group (-SH) in the mesoporous framework is 2.48mmol/g. The ordered mesoporous materials are efficient Hg(2+) adsorbents with almost every -SH site accessible to Hg(2+). In the presence of various kinds of heavy metal ions such as Hg(2+), Cd(2+), Zn(2+), Cu(2+) and Cr(3+), the materials synthesized using poly(alkylene oxide) block cooollxmier (Pluronic 123) g(2+), as surfactant show almost similar affinity to Hg(2+), Cd(2+), and Cr(3+), while the materials synthesized using ofigomeric polymer C(18)H(37)(OCH(2)CH(2))(10)OH (Brij-76) as surfactant exhibit high selectivity to Hg(2+). (C) 2004 Elsevier Inc. All rights reserved.

Identification of ginsenosides in roots of Panax ginseng by HPLC-APCI/MS

A new HPLC-APCI/MS method for the identification of ginsenosides has been developed. The analyses were performed on a reversed-phase C-18 column using a binary eluent (acetonitrile and water) under gradient conditions. Although APCI is a high-temperature evaporative process, HPLC-APCI/MS could effectively identify thermo-labile ginsenosides. The [M-H](-) ions and the thermal degradation ions of ginsenosides could be clearly observed under negative and positive ion conditions, respectively, and these were used to identify the molecular masses, the aglycone structures and the sugar groups of ginsenosides. APCI/MS can provide more explicit information than ESI/MS for identifying and distinguishing ginsenosides. Using the HPLC-APCI/MS method, 35 ginsenosides were identified in Panax ginseng. Copyright (C) 2005 John Wiley & Sons, Ltd.

Large-pore mesoporous SBA-15 silica particles with submicrometer size as stationary phases for high-speed CEC separation

A new mesoporous sphere-like SBA-15 silica was synthesized and evaluated in terms of its suitability as stationary phases for CEC. The unique and attractive properties of the silica particle are its submicrometer particle size of 400 nm and highly ordered cylindrical mesopores with uniform pore size of 12 nm running along the same direction. The bare silica particles with submicrometer size have been successfully employed for the normal-phase electrochromatographic separation of polar compounds with high efficiency (e.g., 210 000 for thiourea), which is matched well with its submicrometer particle size. The Van Deemeter plot showed the hindrance to mass transfer because of the existence of pore structure. The lowest plate height of 2.0 mu m was obtained at the linear velocity of 1.1 mm/s. On the other hand, because of the relatively high linear velocity (e.g., 4.0 mm/s) can be generated, high-speed separation of neutral compounds, anilines, and basic pharmaceuticals in CEC with C-18-modified SBA-15 silica as stationary phases was achieved within 36, 60, and 34 s, respectively.

Influencia del nitrógeno, fósforo y cinc sobre la composición química y rendimiento de la nuez pec��n y su relación con la variabilidad de nutrientes en hoja

El pec��n (Carya illinoinensis (Wangenh.) K. Koch) es una especie frutal y forestal nativa de América del Norte. Estados Unidos y Mexico representan más del 90 por ciento de la superficie y producción mundial. Argentina ocupa el tercer lugar en el mundo en superficie con 6000 hectáreas implantadas, la mayoría de la cuales se encuentran aún en una etapa juvenil con bajos rendimientos. En el país no hay estudios sobre la respuesta a la fertilización del árbol de pec��n en producción. En la presente tesis se investigó el efecto de la fertilización con distintos niveles de nitrógeno (N), fósforo (P) y cinc (Zn) sobre el crecimiento vegetativo, rendimiento y composición química de la hoja y del fruto de árboles de pecan cultivar 'Stuart'. También se evaluó el efecto de la fertilización sobre la concentración de extracto etéreo, tocoferol y proteína en embrión. La fertilización tuvo efecto en el corto plazo sobre las variables tasa de crecimiento en altura y diámetro del árbol mientras que en el rendimiento el efecto fue más tardío. Los tratamientos en kg ha-1 fueron: testigo (T); tratamiento 1 (T1) con 13,2 kg de N , 5,2 kg de P y 5,4 kg de Zn; tratamiento 2 (T2) con 29,7 kg de N , 10,5 kg de P y 10,8 kg de Zn y tratamiento 3 (T3) con 46,2 kg de N , 15,7 kg de P y 21,6 kg de Zn. Se obtuvo la siguiente respuesta en peso de materia seca (MS) de embrión árbol-1: 227 g Testigo (T), 340 g Tratamiento 1 (T1), 301 g Tratamiento 2 (T2) y 558 g Tratamiento 3 (T3). El extracto etéreo no fue influído por la fertilización teniendo una concentración entre 71,51 por ciento y 75,12 por ciento mientras que en su composición en ácidos grasos predominaron los ácidos oleico (C 18:1) con 62,49 por ciento y linoleico (C 18:2) con 26,63 por ciento. Los isómeros ƒÁ-tocoferol, ƒ¿-tocoferol y ƒÀ +ƒÂ-tocoferol tampoco presentaron respuesta a la fertilización, predominado el ƒÁ-tocoferol con una concentración en peso de materia húmeda (MH) de embrión entre 45,96 mg y 55,32 mg ƒÁ-tocoferol 100 g MH-1. La fertilización tuvo influencia sobre el contenido de proteína en el embrión presentando los siguientes valores en porcentaje de MS de embrión: 7,65 por ciento T, 7,81 por ciento T1, 8,36 por ciento T2 y 9 por ciento T3. La fertilización influyó positivamente sobre la concentración de N foliar, negativamente sobre la concentración de P foliar y no tuvo efecto sobre la concentración de Zn foliar. Se encontró una relación lineal positiva entre el N foliar de verano y el peso seco de embrión y una relación lineal negativa entre el N foliar de verano y el contenido de proteína en embrión. La fertilización con N, P y Zn tuvo una influencia positiva sobre el crecimiento y rendimiento del árbol de pecan y la concentración de proteína en embrión. Sin embargo, la fertilización no tuvo efecto sobre la concentración de extracto etereo e isómeros de tocoferol en embrión

Influencia del nitrógeno, fósforo y cinc sobre la composición química y rendimiento de la nuez pec��n y su relación con la variabilidad de nutrientes en hoja

El pec��n (Carya illinoinensis (Wangenh.)K. Koch)es una especie frutal y forestal nativa de América del Norte. Estados Unidos y Mexico representan más del 90 por ciento de la superficie y producción mundial. Argentina ocupa el tercer lugar en el mundo en superficie con 6000 hectáreas implantadas, la mayoría de la cuales se encuentran aún en una etapa juvenil con bajos rendimientos. En el país no hay estudios sobre la respuesta a la fertilización del árbol de pec��n en producción. En la presente tesis se investigó el efecto de la fertilización con distintos niveles de nitrógeno (N), fósforo (P)y cinc (Zn)sobre el crecimiento vegetativo, rendimiento y composición química de la hoja y del fruto de árboles de pecan cultivar 'Stuart'. También se evaluó el efecto de la fertilización sobre la concentración de extracto etéreo, tocoferol y proteína en embrión. La fertilización tuvo efecto en el corto plazo sobre las variables tasa de crecimiento en altura y diámetro del árbol mientras que en el rendimiento el efecto fue más tardío. Los tratamientos en kg ha-1 fueron: testigo (T); tratamiento 1 (T1)con 13,2 kg de N , 5,2 kg de P y 5,4 kg de Zn; tratamiento 2 (T2)con 29,7 kg de N , 10,5 kg de P y 10,8 kg de Zn y tratamiento 3 (T3)con 46,2 kg de N , 15,7 kg de P y 21,6 kg de Zn. Se obtuvo la siguiente respuesta en peso de materia seca (MS)de embrión árbol-1: 227 g Testigo (T), 340 g Tratamiento 1 (T1), 301 g Tratamiento 2 (T2)y 558 g Tratamiento 3 (T3). El extracto etéreo no fue influído por la fertilización teniendo una concentración entre 71,51 por ciento y 75,12 por ciento mientras que en su composición en ácidos grasos predominaron los ácidos oleico (C 18:1)con 62,49 por ciento y linoleico (C 18:2)con 26,63 por ciento. Los isómeros ƒÁ-tocoferol, ƒ¿-tocoferol y ƒÀ +ƒÂ-tocoferol tampoco presentaron respuesta a la fertilización, predominado el ƒÁ-tocoferol con una concentración en peso de materia húmeda (MH)de embrión entre 45,96 mg y 55,32 mg ƒÁ-tocoferol 100 g MH-1. La fertilización tuvo influencia sobre el contenido de proteína en el embrión presentando los siguientes valores en porcentaje de MS de embrión: 7,65 por ciento T, 7,81 por ciento T1, 8,36 por ciento T2 y 9 por ciento T3. La fertilización influyó positivamente sobre la concentración de N foliar, negativamente sobre la concentración de P foliar y no tuvo efecto sobre la concentración de Zn foliar. Se encontró una relación lineal positiva entre el N foliar de verano y el peso seco de embrión y una relación lineal negativa entre el N foliar de verano y el contenido de proteína en embrión. La fertilización con N, P y Zn tuvo una influencia positiva sobre el crecimiento y rendimiento del árbol de pecan y la concentración de proteína en embrión. Sin embargo, la fertilización no tuvo efecto sobre la concentración de extracto etereo e isómeros de tocoferol en embrión

Correlation of TACC3, FGFR3, MMSET and p21 expression with the t(4;14)(p16.3;q32) in multiple myeloma

The t(4;14)(p16;q32) translocation seen in c. 18% of newly diagnosed multiple myeloma (MM) cases, results in FGFR3 activation and creation of an IGH/MMSET fusion transcript. We have recently shown that FGFR3 is activated in only 75% of t(4;14)(+) cases, suggesting that alternative genes near the breakpoint may be involved in the transforming event. The gene, TACC3, located just 50 kb telomeric of FGFR3, with transforming capacity, therefore represented a candidate gene. Using a real-time quantitative polymerase chain reaction-based approach on a cohort of 54 patients, we found a statistically significant, twofold increase in TACC3 expression in t(4;14)(+) cases. TACC3, MMSET and p21 values were positively correlated in all cases and, of particular interest, six patient samples [three t(4;14)(-), three t(4;14)(+)] samples showed a joint up-regulation of TACC3, MMSET and p21. Although a poor prognosis is linked with elevated MMSET expression, an extended follow-up period will be required to evaluate the significance of elevated TACC3 and p21 expression in this subgroup of MM.

High-performance liquid chromatographic determination of 17 beta-estradiol and 17 beta-estradiol-3-acetate solubilities and diffusion coefficients in silicone elastomeric intravaginal rings

A rapid, sensitive reversed-phase high-performance liquid chromatographic method has been developed for the determination of in vitro release of 17 beta-estradiol and its ester prodrug, 17 beta-estradiol-3-acetate, from silicone intravaginal rings. Partial hydrolysis of the acetate under the aqueous conditions provided by the 1% benzalkonium chloride release medium necessitates its conversion to 17 beta-estradiol prior to HPLC analysis. Both steroid peaks have been fully resolved from the benzalkonium chloride peaks by the reported chromatographic method,which employs a C-18 bonded reversed-phase column, an acetonitrile-water (50:50, v/v) mobile phase and a UV detection wavelength of 281 nm. The peak area versus 17 beta-estradiol concentration was found to be linear over the range of 0.0137-1347 mu g ml(-1) The HPLC method has also been used to determine the silicone solubilities and diffusion coefficients of the two related steroids. The almost 100-fold increase in 17 beta-estradiol-3-acetate release from the silicone core-type intravaginal rings compared to 17 beta-estradiol is shown to be due to a 60-fold increase in silicone solubility and a one and a half-fold increase in diffusitivity. The results demonstrate that an effective estrogen replacement therapy dose of 17 beta-estradiol may be administered from a silicone intravaginal reservoir device containing the labile 17 beta-estradiol-3-acetate prodrug. (C) 2000 Elsevier Science B.V. All rights reserved.

Elimination kinetic of 17 beta-estradiol 3-benzoate and 17 beta-nandrolone laureate ester metabolites in calves' urine

Efficient control of the illegal use of anabolic steroids must both take into account metabolic patterns and associated kinetics of elimination; in this context, an extensive animal experiment involving 24 calves and consisting of three administrations of 17 beta-estradiol 3-benzoate and 17 beta-nandrolone laureate esters was carried out over 50 days. Urine samples were regularly collected during the experiment from all treated and non-treated calves. For sample preparation, a single step high throughput protocol based on 96-well C-18 SPE was developed and validated according to the European Decision 2002/657/EC requirements. Decision limits (CC alpha) for steroids were below 0.1 mu g L-1, except for 19-norandrosterone (CC alpha = 0.7 mu g L-1) and estrone (CC alpha = 0.3 mu g L-1). Kinetics of elimination of the administered 17 beta-estradiol 3-benzoate and 17 beta-nandrolone laureate were established by monitoring 17 beta-estradiol, 17 alpha-estradiol, estrone and 17 beta-nandrolone, 17 alpha-nandrolone, 19-noretiocholanolone, 19-norandrostenedione, respectively. All animals demonstrated homogeneous patterns of elimination both from a qualitative (metabolite profile) and quantitative point of view (elimination kinetics in urine). Most abundant metabolites were 17 alpha-estradiol and 17 alpha-nandrolone (> 20 and 2 mg L-1, respectively after 17 beta-estradiol 3-benzoate and 17 beta-nandrolone laureate administration) whereas 17 beta-estradiol, estrone, 17 beta-nandrolone, 19-noretiocholanolone and 19-norandrostenedione were found as secondary metabolites at concentration values up to the mu g L-1 level. No significant difference was observed between male and female animals. The effect of several consecutive injections on elimination profiles was studied and revealed a tendency toward a decrease in the biotransformation of administered steroid 17 beta form. (c) 2008 Elsevier Ltd. All rights reserved.

Haloalkane degradation and assimilation by Rhodococcus rhodochrous NCIMB -13064

The bacterium Rhodococcus rhodochrous NCIMB 13064, isolated from an industrial site, could use a wide range of 1-haloalkanes as sole carbon source but apparently utilized several different mechanisms simultaneously for assimilation of substrate. Catabolism of 1-chlorobutane occurred mainly by attack at the C-1 atom by a hydrolytic dehalogenase with the formation of butanol which was metabolized via butyric acid. The detection of small amounts of gamma-butyrolactone in the medium suggested that some oxygenase attack at C-4 also occurred, leading to the formation of 4-chlorobutyric acid which subsequently lactonized chemically to gamma-butyrolactone. Although 1-chlorobutane-grown cells exhibited little dehalogenase activity on 1-chloroalkanes with chain lengths above C-10, the organism utilized such compounds as growth substrates with the release of chloride. Concomitantly, gamma-butyrolactone accumulated to 1 mM in the culture medium with 1-chlorohexadecane as substrate. Traces of 4-hydroxybutyric acid were also detected. It is suggested that attack on the long-chain chloroalkane is initiated by an oxygenase at the non-halogenated end of the molecule leading to the formation of an omega-chlorofatty acid. This is degraded by beta-oxidation to 4-chlorobutyric acid which is chemically lactonized to gamma-butyrolactone which is only slowly further catabolized via 4-hydroxybutyric acid and succinic acid. However, release of chloride into the medium during growth on long-chain chloroalkanes was insufficient to account for all the halogen present in the substrate. Analysis of the fatty acid composition of 1-chlorohexadecane-grown cells indicated that chlorofatty acids comprised 75% of the total fatty acid content with C-14:0, C-16:0, C-16:1, and C-18:1 acids predominating. Thus the incorporation of 16-chlorohexadecanoic acid, the product of oxygenase attack directly into cellular lipid represents a third route of chloroalkane assimilation. This pathway accounts at least in part for the incomplete mineralization of long-chain chloroalkane substrates. This is the first report of the coexistence of a dehalogenase and the ability to incorporate long-chain haloalkanes into the lipid fraction within a single organism and raises important questions regarding the biological treatment of haloalkane containing effluents.

Plasmid pRTL1 controlling 1-chloroalkane degradation by Rhodococcus rhodochrous NCIMB 13064

Rhodococcus rhodochrous NCIMB13064 can dehalogenate and use a wide range of 1-haloalkanes as sole carbon and energy source. The 1-chloroalkane degradation phenotype may be lost by cells spontaneously or after treatment with Mitomycin C. Two laboratory derivatives of the original strain exhibited differing degrees of stability of the chloroalkane degradation marker. Plasmids of approximately 100 kbp (pRTL1) and 80 kbp (pRTL2) have been found in R. rhodochrous NCIMB13064. pRTL1 was shown to be carrying at least some genes for the dehalogenation of 1-chloroalkanes with short chain lengths (C-3 to C-9). However, no connection was found between the utilization of 1-chloroalkanes with longer chain lengths (C-12 to C-18) and the presence of pRTL1. Three separate events were observed to lead to the inability of NCIMB13064 to dehalogenate the short-chain 1-chloroalkanes; the complete loss of pRTL1, the integration of pRTL1 into the chromosome, or the deletion of a 20-kbp fragment in pRTL1. High-frequency transfer of the 1-chloroalkane degradation marker associated with pRTL1 has been demonstrated in bacterial crosses between different derivatives of R. rhodochrous NCIMB13064, (C) 1995 Academic Press, Inc.

Long-chain haloalkanes are incorporated into fatty-acids by Rhodococcus rhodochrous NCIMB-13064

The fatty acid composition of the cellular lipids of Rhodococcus rhodochrous NCIMB 13064 grown on various long-chain haloalkanes has been investigated and the influence of halogen substituents, carbon chain length and the position of halogen substitution in the growth substrate explored. Of the total fatty acids present in cells grown on 1-chloro-, 1-bromo- and 1-iodohexadecane, 75, 90 and 81%, respectively, were substituted in the omega-position by the corresponding halogen but only 1% of the fatty acids present after growth on 1-fluorotetradecane were fluorinated in this position. The extent of the halofatty acid incorporation with different halogen substituents in the growth substrate appears to reflect the degree to which oxygenase attack is restricted to the non-halogenated end of the haloalkane. Studies of the fatty acid composition of cells after growth on a series of 1-chloroalkanes containing an even number of carbon atoms between C-10 and C-18 indicated chlorofatty acid incorporation from C-12 to C-18 substrates at levels ranging from 21% with C-12 to 75% with C-16. The chlorofatty acids formed by initial oxidation of the chloroalkane were chain-lengthened or chain-shortened by from two to eight carbon atoms, with accompanying desaturation in some instances. Substantial quantities of a methyl-branched C-19:0 chlorofatty acid were also present with several chloroalkane substrates, When the fatty acid composition of cells after growth on 1-bromoalkanes containing an odd number of carbon atoms between C-11 and C-17 was examined, the incorporation of bromofatty acids was observed with C-13, C-15 and C-17 substrates; a maximum of 76% was recorded for the C-15 bromoalkane. As with even chain-length chloroalkanes, both chain-lengthening and -shortening occurred predominantly via two-carbon units so that most bromoacids present possessed an odd number of carbon atoms, When 1-bromododecane or 2-bromododecane were substrates, overall incorporations of bromofatty acids into the lipid fraction were very similar, demonstrating that the position of halogen substitution in the haloalkane was not critical in determining the extent of incorporation of the haloacids into cellular lipids. The results of the study indicate a mechanism by which degradation products of chlorinated paraffins could enter the biological food chain.

Hydroprocessing of waste cooking oil over a dispersed nano catalyst: Kinetics study and temperature effect

The kinetics of hydrodeoxygenation of waste cooking oil (WCO) is investigated with unsupported CoMoS catalysts. A kinetic model is established and a comprehensive analysis of each reaction pathway is carried out. The results show that hydrodecarbonylation/decarboxylation (HDC) routes are the predominant reaction pathways in the elimination of oxygen, with the rate constant three times as high as that of hydrodeoxygenation (HDO). However, the HDC activity of the CoMoS catalyst deactivates due to gradual loss of sulfur from the catalyst. HDO process is insensitive to the sulfur deficiency. The kinetic modeling shows that direct hydrodecarbonylation of fatty acids dominates the HDC routes and, in the HDO route, fatty acids are transferred to aldehydes/alcohols and then to C-18 hydrocarbons, a final product, and the reduction of acids is the rate limiting step. The HDO route via alcohols is dominant over aldehydes due to a significantly higher reaction rate constant. The difference of C-18/C-17 ratio in unsupported and supported catalysts show that a support with Lewis acid sites may play an important role in the selectivity for the hydrodeoxygenation pathways and promoting the final product quality

Total Synthesis of the Potent HIF-1 Inhibitory Antitumor Natural Product, (8R)-Mycothiazole, via Baldwin–Lee CsF/CuI sp3–sp2-Stille Cross-Coupling. Confirmation of the Crews Reassignment

A convenient asymmetric total synthesis of the potent HIF-1 inhibitory antitumor natural product, (−)- or (+)-(8R)-mycothiazole (1), is described. Not only does our synthesis confirm the 2006 structural reassignment made by Crews (Crews, P., et al. J. Nat. Prod. 2006, 69, 145), it revises the [α]_D data previously reported for this molecule in MeOH from −13.7° to +42.3°. The newly developed route to (8R)-1 sets the C(8)–OH stereocenter via Sharpless AE/2,3-epoxy alcohol reductive ring opening and utilizes two Baldwin–Lee CsF/cat. CuI Stille cross-coupling reactions with vinylstannanes 8 and 3 to efficiently elaborate the C(1)–C(4) and C(14)–C(18) sectors.