Application of fractional order concepts in the study of electrical potential

The Maxwell equations, expressing the fundamental laws of electricity and magnetism, only involve the integer-order calculus. However, several effects present in electromagnetism, motivated recently an analysis under the fractional calculus (FC) perspective. In fact, this mathematical concept allows a deeper insight into many phenomena that classical models overlook. On the other hand, genetic algorithms (GA) are an important tool to solve optimization problems that occur in engineering. In this work we use FC and GA to implement the electrical potential of fractional order. The performance of the GA scheme and the convergence of the resulting approximations are analyzed.

EcoTerra Model - application of environmental fiscal reform in local government financing in Portugal

Critical Issues in Environmental Taxation: International and Comparative Perspectives: Volume VI, 699-715

Application of Infrared Thermal Imaging in a Violinist with Temporomandibular Disorder

Temporomandibular disorders (TMD) consist of a group of pathologies that affect the masticatory muscles, temporomandibular joints (TMJ), and/or related structures. String instrumentalists, like many orchestra musicians, can spend hours with head postures that may influence the biomechanical behavior of the TMJ and the muscles of the craniocervicomandibular complex (CCMC). The adoption of abnormal postures acquired during performance by musicians can lead to muscular hyperactivity of the head and cervical muscles, with the possible appearance of TMD. Medical infrared thermography is a non-invasive procedure that can monitor the changes in the superficial tissue related to blood circulation and may serve as a complement to the clinical examination. The objective of this study was to use infrared thermography to evaluate, in one subject, the cutaneous thermal changes adjacent to the CCMC that occur before, during, and after playing a string instrument.

The application of the controllability principle in Electricidade dos Açores, SA

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Application of different heuristic classes in memory-based and stimulus-based decisions

This paper studies the drivers of heuristic application in different decision types. The study compares differences in frequencies of heuristic classes' such as recognition, one-reason choice and trade-off applied in, respectively, memory-based and stimulus-based choices as well as in high and low involvement decisions. The study has been conducted online among 205 participants from 28 countries.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Application of receptive music therapy in internal medicine and cardiology

OBJECTIVE: To investigate the effects of receptive music therapy in clinical practice. METHODS: Receptive music therapy was individually applied via musical auditions, including five stages: musical stimulation, sensation, situation, reflection, and behavioral alteration. Following anamnesis and obtainment of consent, patients answered a first questionnaire on health risk evaluation (Q1), and after participating in 16 weekly music therapy sessions, answered a second one (Q2). RESULTS: Two men and 8 women, aged above 18 years, referred to us due to symptoms of stress, emotional suffering, and the need to change lifestyles (health risk behavior) were studied between August 1998 and December 1999. Comparison between answers to Q1 and Q2, showed a trend (P=0.059) for reduction of ingestion of cholesterol-rich foods and for increased prospects in life with a tendency towards improvement, and also of increased intake of fiber-rich food (55.6%), increased levels of personal satisfaction (44.5%), and decreased levels of stress (66.7%). CONCLUSION: The study demonstrated decreased stress levels and increased personal satisfaction, higher consumption of fiber-rich food, lower cholesterol intake, and a better perspective on life, suggesting that receptive music therapy may be applied in clinical practice as an auxiliary therapeutic intervention for the treatment of behavioral health risks.

Application of data mining for assessment of material properties : creep behavior of high-temperature steels

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2009

CD4+CD25-mTGFbeta+ T cells induced by nasal application of ovalbumin transfer tolerance in a therapeutic model of asthma.

Background: Intranasal administration of high amount of allergen was shown to induce tolerance and to reverse the allergic phenotype. However, mechanisms of tolerance induction via the mucosal route are still unclear. Objectives: To characterize the therapeutic effects of intranasal application of ovalbumin (OVA) in a mouse model of bronchial inflammation as well as the cellular and molecular mechanisms leading to protection upon re-exposure to allergen. Methods: After induction of bronchial inflammation, mice were treated intranasally with OVA and re-exposed to OVA aerosols 10 days later. Bronchoalveolar lavage fluid (BALF), T cell proliferation and cytokine secretion were examined. The respective role of CD4(+)CD25(+) and CD4(+)CD25(-) T cells in the induction of tolerance was analysed. Results: Intranasal treatment with OVA drastically reduced inflammatory cell recruitment into BALF and bronchial hyperresponsiveness upon re-exposure to allergen. Both OVA- specific-proliferation of T cells, T(h)1 and T(h)2 cytokine production from lung and bronchial lymph nodes were inhibited. Transfer of CD4(+)CD25(-) T cells, which strongly expressed membrane-bound transforming growth factor beta (mTGF beta), from tolerized mice protected asthmatic recipient mice from subsequent aerosol challenges. The presence of CD4(+)CD25(+)(Foxp3(+)) T cells during the process of tolerization was indispensable to CD4(+)CD25(-) T cells to acquire regulatory properties. Whereas the presence of IL-10 appeared dispensable in this model, the suppression of CD4(+)CD25(-)mTGF beta(+) T cells in transfer experiments significantly impaired the down-regulation of airways inflammation. Conclusion: Nasal application of OVA in established asthma led to the induction of CD4(+)CD25(-)mTGF beta(+) T cells with regulatory properties, able to confer protection upon allergen re-exposure.

Application of ZnO-Functionalised-Sepiolite in weaning piglet diets

The objective was to evaluate the effect of ZnO-Functionalised-Sepiolite (ZnO-Sepiolite) to fulfil Zn requirements and health status of weaning piglets. Pre-starter Basal Diet (BD, corn– soybean based, from weaning till 14 days on trial) was calculated to provide 27 mg Zn/kg feed from raw materials and had no added ZnO and no antibiotics or organic acids. Treatments during pre-starter period were: 1) BD+90% of NRC Zn requirements completed with ZnO (ZnO90); 2) BD+90% of NRC Zn requirements completed with ZnO-Sepiolite (ZnOS90); 3) BD+3000 mg ZnO/kg of diet (ZnO3000); 4) BD+150 mg added Zn/kg diet from ZnO-Sepiolite (ZnOS150). The starter feed (corn–soybean based, from 14 till 31 days on trial) was common for all piglets, and met 90% NRC Zn requirements by adding ZnO. Diarrhea affected more than 50% of the animals of ZnO90, ZnOS90 and ZnOS150, and 33% of the ZnO3000 animals. Animals from ZnOS90 tended (Pb0.10) to improve Gain to Feed ratio (G:F) compared to animals from ZnO90 (0.830 kg/kg vs. 0.811 kg/kg for G:F). Performance of animals from ZnO3000 was not significantly different from the other treatments, and was numerically similar to animals from ZnOS90. The inclusion of ZnO at 3000 mg/kg of feed in the pre-starter period numerically decreased P in serum at the end of this period, with no effect on Ca level; normal levels were restored after 2 weeks of feeding the same levels of Zn than other animals. Animals fed ZnOSepiolite diets had numerically higher serum Ca than ZnO90 and ZnO3000 at 12 days and higher than ZnO90 at 28 days. Serum Zn levels were significantly higher for ZnO3000 than the other treatments.

Occurence of larval Culicidae (Diptera) in water retained in Aquascypha hydrophora (Fungus: Stereaceae) in Central Amazônia, Brazil

The community structure of insects, especially mosquito larvae, in water held in the fungus Aquascypha hydrophora (Berk.) Reid (Stereaceae) is reported. The study was done in the Adolpho Ducke Forest Reserve, 26 km east of Manaus, AM, Brazil, from September 1998 through November 1999. The most abundant entomofauna were immature Culicidae (n = 121) 91.7%, followed by adult Dytiscidae (n = 3) 2.3%, immature Chironomidae (n = 5) 3.8% and immature Tipulidae (n = 3) 2.3%. Culicidae associated with A. hydrophora comprised species of the subfamilies Anophelinae and Culicinae.

Detection of Toxoplasma gondii oocysts in water: proposition of a strategy and evaluation in Champagne-Ardenne Region, France

Water is a vehicle for disseminating human and veterinary toxoplasmosis due to oocyst contamination. Several outbreaks of toxoplasmosis throughout the world have been related to contaminated drinking water. We have developed a method for the detection of Toxoplasma gondii oocysts in water and we propose a strategy for the detection of multiple waterborne parasites, including Cryptosporidium spp. and Giardia. Water samples were filtered to recover Toxoplasma oocysts and, after the detection of Cryptosporidium oocysts and Giardia cysts by immunofluorescence, as recommended by French norm procedure NF T 90-455, the samples were purified on a sucrose density gradient. Detection of Toxoplasma was based on PCR amplification and mouse inoculation to determine the presence and infectivity of recovered oocysts. After experimental seeding assays, we determined that the PCR assay was more sensitive than the bioassay. This strategy was then applied to 482 environmental water samples collected since 2001. We detected Toxoplasma DNA in 37 environmental samples (7.7%), including public drinking water; however, none of them were positive by bioassay. This strategy efficiently detects Toxoplasma oocysts in water and may be suitable as a public health sentinel method. Alternative methods can be used in conjunction with this one to determine the infectivity of parasites that were detected by molecular methods.

Lean IT Application of 5S/6S Technique in a SME

O Lean não é apenas uma prática. É uma revolução nas Tecnologias de Informação (TI) proporcionando uma maior e melhor utilização dos recursos e procurando alcançar custos mais baixos dos que existem atualmente. É muito mais do que uma lista de ferramentas e metodologias e para que seja estabelecido é necessário mudar comportamentos culturais e incentivar todas as organizações a pensarem de forma diferente sobre o poder da informação versus o valor do negócio. Normalmente associa-se o Lean à criação de valor para a organização. Mas o valor é significativo quando é trazido com eficiência e resultando na eliminação de processos que consomem tempo, recursos e espaço desnecessário. Os princípios Lean podem ajudar as organizações na melhoria da qualidade, redução de custos e no alcance da eficiência através de uma melhor produtividade. Existem vários conceitos Lean que podem ser associados a diferentes objetivos de resolução de problemas. Em particular, este trabalho é uma dissertação programada para analisar um novo paradigma sobre o Lean que surgiu recentemente - Lean para Tecnologias de Informação (Lean IT). Esta dissertação apresenta uma abordagem para o Lean IT (enquadramento, objetivos e metodologia) para realizar o trabalho e utiliza um único estudo de caso, com abordagem à técnica 5S/6S (até o terceiro nível de avaliação), numa Pequena, Média Empresa (PME), de forma a demonstrar a agregação de valor e as vantagens na eliminação de resíduos/desperdícios nos seus processos. A técnica também mostra a evolução da avaliação antes e depois da sua aplicação. Este estudo de caso individual avalia um Departamento de TI (com uma equipe de cinco colaboradores e um chefe de Departamento) através da observação direta, documentação e arquivos de registos e os equipamentos analisados são computadores, postos de trabalho e projetos (código desenvolvido, portais e outros serviços de TI). x Como guia, a metodologia inclui a preparação da avaliação em conjunto com o responsável/chefe do Departamento de TI, o desenrolar das operações, a identificação do fluxo de valor para cada atividade, o desenvolvimento de um plano de comunicação e a análise de cada passo da avaliação do fluxo de processamento. Os principais resultados estão refletidos nas novas ferramentas de trabalho (Microsoft SharePoint e Microsoft Project em detrimento do Microsoft Excel) que fornecem comunicação remota e controlo de projetos para todos os stakeholders, tais como, a gestão de topo, parceiros e clientes (algumas organizações incluem o Outsourcing no desenvolvimento de funcionalidades específicas). Os resultados também refletem-se na qualidade do trabalho, no cumprimento de prazos, na segurança física e lógica, na motivação dos colaboradores e na satisfação dos clientes. A técnica 5S/6S ajuda a esclarecer os conceitos e princípios Lean, exequibilidade e aumenta a curiosidade sobre a implementação da técnica noutros departamentos tais como o Financeiro e ou o de Recursos Humanos. Como forma de consolidação do trabalho tornou-se possível organizar a avaliação para que a organização possa candidatar-se a uma certificação na norma ISO/IEC 25010:2011, no modelo de qualidade de software (software é o core business desta PME). Mas tal só será possível se toda a organização atingir a padronização dos seus processos. Este estudo de caso mostra que os conceitos Lean e a aplicação de uma ou mais das suas técnicas (neste caso particular a técnica 5S/6S) ajuda a obter melhores resultados através da gestão e melhoria dos seus principais serviços.

Application of Open Innovation Paradigm in Small and Medium Enterprises in Russia

The objective of this study is to explore how the Open Innovation paradigm is applied in by small and medium-size enterprises in Russia. The focus of the study is to understand how the processes of research and development and commercialization proceed in these kind of companies and to which extent they apply open innovation principles. Russian leadership makes certain steps for transition from the export of raw materials to an innovative model of economic growth. The research aims to disclose actual impact of these attempts. The closed innovation model and the erosion factors which lead to the destruction of an old one and emergence of new model are described. Features of open innovation implementation and intellectual property rights protection in small and medium enterprises are presented. To achieve the objective, a qualitative case study approach was chosen. Research includes facts and figures, views and opinions of management of studied companies related to innovation process in the company and in Russia in general. The research depicts the features of Open Innovation implementation by SMEs in Russia. A large number of research centers with necessary equipment and qualified personnel allow case companies to use external R&D effectively. They cooperate actively with research institutes, universities and laboratories. Thus, they apply inbound Open Innovation. On the contrary, lack of venture capital, low demand for technologies within the domestic market and weak protection of intellectual property limit the external paths to new markets. Licensing-out and creation of spin-off are isolated cases. Therefore, outbound Open Innovation is not a regular practice.