Effect of ambient conditions on dimensional stability and stiffness of commercial paperboard and paperboard trays

The objective of this study was to develop laboratory test methods for characterizing the effects of changed moisture content on paperboard trays produced by press-forming process. Influence of moisture on the properties of unconverted paperboard such as bending stiffness, bursting strength, and curling was studied. Paperboard and tray samples were tested after storing in different relative humidity conditions (35, 50, 65, 80 and 95% RH). The effect of PE and PET extrusion coatings on these properties was also studied. It was found that increase in moisture content of paperboard decreases bending and bursting strength, dimensional stability and stiffness of paperboard trays. Such physical and mechanical properties as bending stiffness and curling of paperboard seem to define the stiffness of ready-made trays and their dimensional stability. Paperboards and trays with extruded PE and PET one sided coatings demonstrated higher strength properties but at the same time had lower dimensional stability comparing to uncoated paperboards. Samples with smaller polymer coat weight had better dimensional stability than respective samples with higher coat weight. It was also found that preconditioning of paperboard in lower humidity environment before press-forming could improve dimensional stability and stiffness of ready-made tray.

Theoretical modelling of Staphylococcus aureus growth in a cooked meat product kept at ambient temperature using temperature profiles of selected Mexican cities

A theoretical model is used to predict the growth of Staphylococcus aureus in a pasteurized meat product kept at ambient temperatures for several hours. For this purpose, the temperature profiles of some cities of Mexico were combined with literature data on the kinetics of S. aureus growth. As shown by theoretical predictions, if the food is kept at ambient temperature, the average daily temperature may not give accurate predictions.

Incentivising Innovation? The competition law approach to the new challenge clauses in the competition rules for technology licensing agreements of the EU

Tutkielman aiheena on EU:n kilpailuoikeudellinen lähestymistapa challenge-lausekkeisiin teknologinsiirtosopimuksia koskevassa ryhmäpoikkeusasetuksessa. Teknologian lisensoinnin katsotaan olevan tärkeä väline teknologian kehityksen levittämisessä ja innovaation edistämisessä. Joissakin tapauksissa lisenssisopimus voi sisältää kilpailua rajoittavia lausekkeita, joiden voidaan kuitenkin nähdä hyödyttävän kilpailua kokonaisuutta arvostellen. Tällaisia lausekkeita ovat niin sanotut ”no-challenge” – lauseke, eli sopimusehto, jonka nojalla lisenssinsaaja sitoutuu olemaan haastamatta lisensoidun immateriaalioikeuden pätevyyttä ja ”termination-on-challenge” – lauseke, joka antaa lisensoijalle haastettaessa oikeuden päättää lisenssisopimus. Tutkielmassa perehdytään challenge -lausekkeiden hyväksyttävyyden arviointiin Euroopan unionin kilpailuoikeuden näkökulmasta uuden 1.5.2014 voimaan tulleen ryhmäpoikkeusasetuksen valossa. Muissa kuin yksinoikeuksia luovissa teknologiansiirtosopimuksissa olevat termination-on-challenge – lausekkeita tulee uusimmassa ryhmäpoikkeusetuksessa aina perustua yritysten itse suorittamaan tapauskohtaiseen arviointiin. No-challenge – lausekkeet ovat jatkossakin aiemman käytännön mukaisesti ryhmäpoikkeuksen soveltamisalan ulkopuolella. Komission on perustellut challenge - lausekkeiden jättämistä asetuksen ulkopuolelle julkisella intressillä, joka on päästä eroon mitättömistä immateriaalioikeuksista. Komission on katsonut, että challenge – lausekkeiden kilpailua rajoittava ominaisuus on mitättömien immateriaalioikeuksien esiintyminen markkinoilla, mikä osaltaan vääristää kilpailua ja hidastaa toimijoiden markkinoille pääsyä. Toisaalta lausekkeiden voidaan sanoa edistävän kilpailua, sillä ne usein tarjoavat immateriaalioikeuden haltijalle riittävän oikeussuojan ja kannustimen lisensoida teknologia, mikä lisää kilpailua, keksijöiden kannustimia panostaa innovaatioihin sekä vähentää transaktiokustannuksia. Tutkielman keskeinen tulos on ennen kaikkea challenge-lausekkeiden kilpailuvaikutusten tunnistamisessa ja komission perusteluiden kriittisessä arvioinnissa. Komission linjauksen perustelut eivät saa riittävää tukea ottaen huomioon vaikutustenarvioinnin, EU:n tuomioistuinkäytännön sekä taloustieteellisen lähestymistavan. Tutkielman tulosten pohjalta ja tukeutuen eri oikeuslähteisiin, taloustieteellisiin argumentteihin ja oikeusvertailevaan tutkimukseen, on mahdollista tehdä johtopäätöksiä niistä seikoista ja argumenteista, joilla on merkitystä uuden politiikkalinjauksen kilpailuvaikutuksiin.

Drying soybean seed using air ambient temperature at low relative humidity

Under subtropical and tropical environments soybean seed (Glycine max (L.) Merrill) are harvested early to avoid deterioration from weathering. Careful after-harvest drying is required and is an important step in maintaining the physiological quality of the seed. Soybean seed should be harvested when the moisture content is in a range of 16-20%. Traditional drying utilizes a high temperature air stream passed through the seed mass without dehumidification. The drying time is long because the system is inefficient and the high temperature increases the risk of thermal damage to the seed. New technology identified as heat pipe technology (HPT) is available and has the unique feature of removing the moisture from the air stream before it is passed through the seed mass at the same environmental temperature. Two studies were conducted to evaluate the performance of HPT for dry soybean seed. In the first study the seeds were dried from 17.5 to 11.1% in 2 hours and 29 minutes and in the second sudy the seeds were dried from 22.6 to 11.9% in 16 hours and 32 minutes. This drying process caused no reduction in seed quality as measured by the standard germination, tetrazolium-viability, accelerated aging and seedling vigor classification tests. The only parameter that indicated a slight seed quality reduction was tetrazolium vigor in the second study. It was concluded that the HPT system is a promising technology for drying soybean seed when efficiency and maintenance of physiological quality are desired.

Drying peanut seed using air ambient temperature at low relative humidity

The moisture content of peanut kernel (Arachis hypogaea L.) at digging ranges from 30 to 50% on a wet basis (w.b.). The seed moisture content must be reduced to 10.5% or below before seeds can be graded and marketed. After digging, peanuts are cured on a window sill for two to five days then mechanically separated from the vine. Heated air is used to further dry the peanuts from approximately 18 to 10% moisture content w.b. Drying is required to maintain peanut seed and grain quality. Traditional dryers pass a high temperature and high humidity air stream through the seed mass. The drying time is long because the system is inefficient and the high temperature increases the risk of thermal damage to the kernels. New technology identified as heat pipe technology (HPT) is available and has the unique feature of removing the moisture from the air stream before it is heated and passed through the seed. A study was conducted to evaluate the performance of the HPT system in drying peanut seed. The seeds inside the shells were dried from 17.4 to 7.3% in 14 hours and 11 minutes, with a rate of moisture removal of 0.71% mc per hour. This drying process caused no reduction in seed quality as measured by the standard germination, accelerated ageing and field emergence tests. It was concluded that the HPT system is a promising technology for drying peanut seed when efficiency and maintenance of physiological quality are desired.

The use of lichens as indicators of ambient air quality in Southern Ontario

The inverse relationship between arboreal lichen species richness and sulphur dioxide in ambient air has been thoroughly documented in the literature. Previous work in southern Ontario has shown that lichen bioindication can identify areas of potential concern regarding air quality. The EMAN suite of l i chens was applied in the City of Samia by surveying 458 Sugar Maple trees, in order to test the applicability of lichen bioindication under conditions of high mean S02 levels and high species richness values. The results of the survey were explored using Geographic Information Systems. A spatial relationship between lichen community variables, the Bluewater Bridge and the highway was identified. Lichen species richness, lichen percent cover and Index of Atmospheric Purity values were higher along the bridge and highway. No strong gradients were found between other known pollution sources and no lichen deserts were identified. The most common community grouping consisted of Physcia millegrana Degel, Candelaria concolor (Dicks) B. Stein, Physcia aipolia (Ehrh ex Humb.) Furnrohr; all of which are known nitrophytes. The relationship between substrate pH and lichen species richness was examined. Sites with a known source of anthropogenic chemical contamination were found to have a correlation of l=0.8 between lichen species richness and pH. The inverse was found for sites with no known source of contamination with a correlation of r 2 =-0.72. The findings suggest that species richness may be influenced by altering substrate pH which promotes the growth of nitrophytic species capable of tolerating high S02 levels.

The Ex Post Profitability of Licensing Thechnology.

Rapport de recherche

Fast imaging of laser-blow-off plume:Lateral confinement in ambient environment

The dynamics of plasma plume, formed by the laser-blow-off of multicomponent LiF-C thin film under various ambient pressures ranging from high vacuum to argon pressure of 3 Torr, has been studied using fast imaging technique. In vacuum, the plume has ellipsoidal shape. With the increase in the ambient pressure, sharp plume boundary is developed showing a focusing-like confinement in the lateral space behavior in the front end, which persists for long times. At higher ambient pressure (> 10−1 Torr ), structures are developed in the plasma plume due to hydrodynamic instability/turbulences.

Influence of ambient gas on the temperature and density of laser produced carbon plasma

The effect of ambient gas on the dynamics of the plasma generated by laser ablation of a carbon target using 1.06 μm radiation from a Q-switched Nd:YAG laser has been investigated using a spectroscopic technique. The emission characteristics of the carbon plasma produced in argon, helium and air atmospheres are found to depend strongly on the nature and pressure of the surrounding gas. It has been observed that hotter and denser plasmas are formed in an argon atmosphere rather than in helium or air as an ambient.

Prompt electron emission and collisional ionization of ambient gas during pulsed laser ablation of silver

A silver target kept under partial vacuum conditions was irradiated with focused nanosecond pulses at 1:06 mm from a Nd:YAG laser. The electron emission monitored with a Langmuir probe shows a clear twin-peak distribution. The first peak which is very sharp has only a small delay and it indicates prompt electron emission with energy as much as 60 5 eV. Also the prompt electron emission shows a temporal profile with a width that is same as that for the laser pulse whereas the second peak is broader, covers several microseconds, and represents the low-energy electrons (2 0:5 eV) associated with the laser-induced silver plasma as revealed by time-of-flight measurements. It has been found that prompt electrons ejected from the target collisionally excite and ionize ambient gas molecules. Clearly resolved rotational structure is observed in the emission spectra of ambient nitrogen molecules. Combined with time-resolved spectroscopy, the prompt electrons can be used as excitation sources for various collisional excitation–relaxation experiments. The electron density corresponding to the first peak is estimated to be of the order of 1017 cm?--3 and it is found that the density increases as a function of distance away from the target. Dependence of probe current on laser intensity shows plasma shielding at high laser intensities.

Twin peak distribution of electron emission profile and impact ionization of ambient molecules during laser ablation of silver target

Laser-induced plasma generated from a silver target under partial vacuum conditions using the fundamental output of nanosecond duration from a pulsed Nd:yttrium aluminum garnet laser is studied using a Langmuir probe. The time of flight measurements show a clear twin peak distribution in the temporal profile of electron emission. The first peak has almost the same duration as the laser pulse while the second lasts for several microseconds. The prompt electrons are energetic enough ('60 eV) to ionize the ambient gas molecules or atoms. The use of prompt electron pulses as sources for electron impact excitation is demonstrated by taking nitrogen, carbon dioxide, and argon as ambient gases.

Effect of ambient gas on the expansion dynamics of plasma plume formed by laser blow off of thin film

A study has been carried out to understand the influence of ambient gases on the dynamics of laser-blow-off plumes of multi-layered LiF–C thin film. Plume images at various time intervals ranging from 100 to 3000 ns have been recorded using an intensified CCD camera. Enhancement in the plume intensity and change in size and shape occurs on introducing ambient gases and these changes are highly dependent on the nature and composition of the ambient gas used. Velocity of the plume was found to be higher in helium ambient whereas intensity enhancement is greater in argon environment. The plume shapes have maximum size at 10−2 and 10−1 Torr of Ar and He pressures, respectively. As the background pressure increases further (>10−2 Torr: depending on the nature of gas), the plume gets compressed/focused in the lateral direction. Internal structure formation and turbulences are observed at higher pressures (>10−1 Torr) in both ambient gases.

Cinematographic Licensing

In India, film censorship originated with Cinematograph Act 1918 empowering the Provincial Governments to establish censorial authorities. In 1949, an amendment provided for a Central Board of Film Censors. In 1952, a new legislation gave the Central Government enormous powers, making the Board to function as a department of the Central Government. The Government had control over the Board with the mechanism of issuing 'directions' to the censors and laying down censorship rules. The legislation did not provide any objective criteria for censoring films. The 1959 amendment, aimed at curing this defect, only incorporated the grounds contained in Article 19(2) of the Constitution. Even after expert studies and a significant decision by the Supreme Court, pointing out the inadequacy of the existing system, and governmental attempts to bring reforms by way of fresh directions, appointment of appellate authority and framing of new rules, the system still warrants radical change. The thesis explores them.