An aligned subtree kernel for weighted graphs

In this paper, we develop a new entropic matching kernel for weighted graphs by aligning depth-based representations. We demonstrate that this kernel can be seen as an aligned subtree kernel that incorporates explicit subtree correspondences, and thus addresses the drawback of neglecting the relative locations between substructures that arises in the R-convolution kernels. Experiments on standard datasets demonstrate that our kernel can easily outperform state-of-the-art graph kernels in terms of classification accuracy.

Synthesis and electron emission properties of aligned carbon nanotube arrays

Carbon nanotubes (CNTs) have become one of the most interesting allotropes of carbon due to their intriguing mechanical, electrical, thermal and optical properties. The synthesis and electron emission properties of CNT arrays have been investigated in this work. Vertically aligned CNTs of different densities were synthesized on copper substrate with catalyst dots patterned by nanosphere lithography. The CNTs synthesized with catalyst dots patterned by spheres of 500 nm diameter exhibited the best electron emission properties with the lowest turn-on/threshold electric fields and the highest field enhancement factor. Furthermore, CNTs were treated with NH3 plasma for various durations and the optimum enhancement was obtained for a plasma treatment of 1.0 min. CNT point emitters were also synthesized on a flat-tip or a sharp-tip to understand the effect of emitter geometry on the electron emission. The experimental results show that electron emission can be enhanced by decreasing the screening effect of the electric field by neighboring CNTs. In another part of the dissertation, vertically aligned CNTs were synthesized on stainless steel (SS) substrates with and without chemical etching or catalyst deposition. The density and length of CNTs were determined by synthesis time. For a prolonged growth time, the catalyst activity terminated and the plasma started etching CNTs destructively. CNTs with uniform diameter and length were synthesized on SS substrates subjected to chemical etching for a period of 40 minutes before the growth. The direct contact of CNTs with stainless steel allowed for the better field emission performance of CNTs synthesized on pristine SS as compared to the CNTs synthesized on Ni/Cr coated SS. Finally, fabrication of large arrays of free-standing vertically aligned CNT/SnO2 core-shell structures was explored by using a simple wet-chemical route. The structure of the SnO2 nanoparticles was studied by X-ray diffraction and electron microscopy. Transmission electron microscopy reveals that a uniform layer of SnO2 is conformally coated on every tapered CNT. The strong adhesion of CNTs with SS guaranteed the formation of the core-shell structures of CNTs with SnO2 or other metal oxides, which are expected to have applications in chemical sensors and lithium ion batteries.

A facile spin-cast route for cation exchange of multilayer perpendicularly-aligned nanorod assemblies

A facile spin cast route was developed to convert perpendicularly aligned nanorod assemblies of cadmium chalcogenides into their silver and copper analogues. The assemblies are rapidly cation exchanged without affecting either the individual rod dimensions or collective superlattice order extending over several multilayers.

Droplet etching of deep nanoholes for filling with self-aligned complex quantum structures

Strain-free epitaxial quantum dots (QDs) are fabricated by a combination of Al local droplet etching (LDE) of nanoholes in AlGaAs surfaces and subsequent hole filling with GaAs. The whole process is performed in a conventional molecular beam epitaxy (MBE) chamber. Autocorrelation measurements establish single-photon emission from LDE QDs with a very small correlation function g (2)(0)≃ 0.01 of the exciton emission. Here, we focus on the influence of the initial hole depth on the QD optical properties with the goal to create deep holes suited for filling with more complex nanostructures like quantum dot molecules (QDM). The depth of droplet etched nanoholes is controlled by the droplet material coverage and the process temperature, where a higher coverage or temperature yields deeper holes. The requirements of high quantum dot uniformity and narrow luminescence linewidth, which are often found in applications, set limits to the process temperature. At high temperatures, the hole depths become inhomogeneous and the linewidth rapidly increases beyond 640 °C. With the present process technique, we identify an upper limit of 40-nm hole depth if the linewidth has to remain below 100 μeV. Furthermore, we study the exciton fine-structure splitting which is increased from 4.6 μeV in 15-nm-deep to 7.9 μeV in 35-nm-deep holes. As an example for the functionalization of deep nanoholes, self-aligned vertically stacked GaAs QD pairs are fabricated by filling of holes with 35 nm depth. Exciton peaks from stacked dots show linewidths below 100 μeV which is close to that from single QDs.

Third-mission policy goals and incentives from performance-based funding: Are they aligned?

In competitive knowledge-based economies, policymakers recognize the importance of universities’ engagement in third mission activities. This article investigates how a specific policy approach to encourage third mission engagement—the use of performance-based funding to reward universities’ success in this domain—aligns with the broader goals of third mission policy. Considering the case of the UK, the first country to have implemented a system of this kind, we analyse how the system has come into being and how it has evolved, and we discuss whether its implementation is likely to encourage universities to behave in ways that are aligned with the goals of third mission policy, as outlined in government documents. We argue that the system encourages universities to focus on a narrow range of income-producing third mission activities, and this is not well aligned with the policy goal to support a complex innovation ecosystem comprising universities with different third mission objectives and strategies. The article concludes by proposing possible avenues for achieving greater alignment between incentives and policy goals.

Direct spun aligned carbon nanotube web-reinforced proton exchange membranes for fuel cells

A new method combining electrospinning of SPEEK and direct spinning of CNT forests has been used to prepare sulfonated poly(ether ether ketone) (SPEEK)/directly spinnable carbon nanotube (dsCNT) composite proton exchange membranes. The SPEEK/dsCNT membrane is more robust than SPEEK alone, and in a fuel cell significantly outperforms both SPEEK and the commercial Nafion 212 membranes.

Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration

Tooth loss is a common result of a variety of oral diseases due to physiological causes, trauma, genetic disorders, and aging and can lead to physical and mental suffering that markedly lowers the individual’s quality of life. Tooth is a complex organ that is composed of mineralized tissues and soft connective tissues. Dentin is the most voluminous tissue of the tooth and its formation (dentinogenesis) is a highly regulated process displaying several similarities with osteogenesis. In this study, gelatin, thermally denatured collagen, was used as a promising low-cost material to develop scaffolds for hard tissue engineering. We synthetized dentin-like scaffolds using gelatin biomineralized with magnesium-doped hydroxyapatite and blended it with alginate. With a controlled freeze-drying process and alginate cross-linking, it is possible to obtain scaffolds with microscopic aligned channels suitable for tissue engineering. 3D cell culture with mesenchymal stem cells showed the promising properties of the new scaffolds for tooth regeneration. In detail, the chemical–physical features of the scaffolds, mimicking those of natural tissue, facilitate the cell adhesion, and the porosity is suitable for long-term cell colonization and fine cell–material interactions.

Low‑cost origami fabrication of 3D self‑aligned hybrid microfluidic structures

[EN] 3D microfluidic device fabrication methods are normally quite expensive and tedious. In this paper, we present an easy and cheap alternative wherein thin cyclic olefin polymer (COP) sheets and pressure sensitive adhesive(PSA) were used to fabricate hybrid 3D microfluidic structures, by the Origami technique, which enables the fabrication of microfluidic devices without the need of any alignment tool. The COP and PSA layers were both cut simultaneously using a portable, low-cost plotter allowing for rapid prototyping of a large variety of designs in a single production step. The devices were then manually assembled using the Origami technique by simply combining COP and PSA layers and mild pressure. This fast fabrication method was applied, as proof of concept, to the generation of a micromixer with a 3D-stepped serpentine design made of ten layers in less than 8 min. Moreover, the micromixer was characterized as a function of its pressure failure, achieving pressures of up to 1000 mbar. This fabrication method is readily accessible across a large range of potential end users, such as educational agencies (schools,universities), low-income/developing world research and industry or any laboratory without access to clean room facilities, enabling the fabrication of robust, reproducible microfluidic devices.

Explora: Infrastructure for Scaling Up Software Visualisation to Corpora

Visualisation provides good support for software analysis. It copes with the intangible nature of software by providing concrete representations of it. By reducing the complexity of software, visualisations are especially useful when dealing with large amounts of code. One domain that usually deals with large amounts of source code data is empirical analysis. Although there are many tools for analysis and visualisation, they do not cope well software corpora. In this paper we present Explora, an infrastructure that is specifically targeted at visualising corpora. We report on early results when conducting a sample analysis on Smalltalk and Java corpora.

Il contratto di compravendita immobiliare da un punto di vista pragmatico. Modello per un'analisi testuale contrastiva sviluppato su corpora da Italia, Germania e Austria

Oggetto del presente studio è un'analisi del genere testuale del contratto di compravendita immobiliare negli ordinamenti di Italia, Germania e Austria in un'ottica sincronica e pragmatica. Il testo è considerato come un atto comunicativo legato a convenzioni prestabilite e volto ad assolvere a specifiche funzioni sociali. L'obbiettivo principale del lavoro è lo sviluppo di un modello di analisi testuale che possa evidenziare l'interazione tra la funzione primaria e l'assetto macro- e microstrutturale di questo genere testuale, ovvero tra il piano giuridico e quello linguistico-testuale. L'analisi svolta permette inoltre di confrontare tre sistemi giuridici rispetto alla modalità di attuare questo negozio, nonché le lingue italiana e tedesca ed altresì due varietà di quest'ultima. Il corpus è composto da 40 atti autentici e 9 atti da formulari, compresi in un arco temporale che va dal 2000 al 2018. L'analisi parte con la definizione delle coordinate intra-ed extratestuali che determinano questo genere testuale e da una sua classificazione all'interno dei testi dell'ambito giuridico. Su questa base, i contratti dei corpora di Italia, Germania e Austria vengono analizzati separatamente rispetto alla loro macrostruttura, comprendendo in ciò tre piani macrostrutturali, ovvero quello giuridico da un lato e quelli funzionale e tematico dall'altro. L'interazione tra la funzione giuridica e l'assetto linguistico-testuale del contratto di compravendita immobiliare emerge in particolare a livello di quello funzionale, ossia relativo alla sequenza delle funzioni linguistiche realizzate sulla base dei contenuti giuridici. I risultati evinti dall'analisi dei tre corpora sono, infine, messi a confronto e integrati con una classificazione delle forme verbali che caratterizzano determinati macro-ambiti d'uso/funzionali all'interno di questo genere testuale, ovvero la realizzazione di specifiche funzioni linguistiche e giuridiche. Il metodo proposto offre nuovi spunti per ricerche future, tanto nell'ambito della linguistica contrastiva applicata a testi specialistici, che della traduzione e linguistica giuridica.

In Your Face! Investigating Facework, Criticism, and Humour with Corpora in Electoral Debates

In political debates, the media[tisation] can determine the use of language with the aim to increase their spectacularisation and polarisation, possibly by means of criticism and humour, respectively. These linguistic strategies are often used in order to shape what was defined by Goffman as one’s face. Politicians, in particular, can recur to facework in a double sense: shaping their own face positively and/or that of their opponents negatively. Starting from the sociologic theory of face by Goffman and Levinson, with the help of corpus analysis tools, this research investigated the ways in which various forms of criticism and forms of humour were conducted in 3 electoral debates on a national scale (Germany, Ireland, and New Zealand) and 1 debate for the municipal election in Rome. The transcripts were revised after automatic transcriptions were extracted or found online, of which the audio-visual content is available on the Internet. The CADS research aimed to investigate the role that criticism and humour played within each participant’s discourse, and to identify differences and similarities among the strategies used by political leaders and moderators in different countries, and in different cultural, political, and media contexts.

[between The Country And The Laboratory: The Dynamics Of The Production Of Knowledge At The Menopause Outpatients Clinic At Caism, Unicamp.]

This study investigates the practices involved in the production of knowledge about menopause at Caism, Unicamp, a reference center for public policies for women's health. Gynecological appointments and psychological support meetings were observed, and women and doctors were interviewed in order to identify what discourse circulates there and how different actors are brought in to ensure that the knowledge produced attains credibility and travels beyond the boundaries of the teaching hospital to become universal. The analysis is based on localized studies aligned with social studies of science and technology.

Effects Of Misalignments In The Retinal Nerve Fiber Layer Thickness Measurements With Spectral Domain Optical Coherence Tomography.

Purpose. To investigate misalignments (MAs) on retinal nerve fiber layer thickness (RNFLT) measurements obtained with Cirrus(©) SD-OCT. Methods. This was a retrospective, observational, cross-sectional study. Twenty-seven healthy and 29 glaucomatous eyes of 56 individuals with one normal exam and another showing MA were included. MAs were defined as an improper alignment of vertical vessels in the en face image. MAs were classified in complete MA (CMA) and partial MA (PMA), according to their site: 1 (superior, outside the measurement ring (MR)), 2 (superior, within MR), 3 (inferior, within MR), and 4 (inferior, outside MR). We compared RNFLT measurements of aligned versus misaligned exams in all 4 sectors, in the superior area (sectors 1 + 2), inferior area (sectors 3 + 4), and within the measurement ring (sectors 2 + 3). Results. RNFLT measurements at 12 clock-hour of eyes with MAs in the superior area (sectors 1 + 2) were significantly lower than those obtained in the same eyes without MAs (P = 0.043). No significant difference was found in other areas (sectors 1 + 2 + 3 + 4, sectors 3 + 4, and sectors 2 + 3). Conclusion. SD-OCT scans with superior MAs may present lower superior RNFLT measurements compared to aligned exams.