Desenvolvimento e caracterização de revestimentos protetores contra carburização em tubos de pirólise de hidrocarbonetos na produção de olefinas

Este trabalho consistiu no desenvolvimento de revestimentos protetores contra carburização em ligas HP-40Nb, utilizadas na em fornos de pirólise para produção de olefinas, e do desenvolvimento de aparatos e técnicas para o teste, avaliação e caracterização destes revestimentos em ambientes fortemente carburizantes. Foram testados vários tipos de revestimentos, podendo estes ser resumidos em três grupos: i) camada de difusão de elementos específicos para o interior do metal (Al, Cu e Sn); ii) recobrimento com liga metálica (Ni-50Cr e Ni-5Al) e iii) recobrimento cerâmico (Al2O3, Cr2O3 e Al2O3 - TiO2). Além de revestimentos e camadas de difusão, um quarto tipo de material foi testado em sua resistência à carburização: ligas do tipo Fe-Cr- Al. A fim de testar os revestimentos e materiais desenvolvidos foram testados vários meios carburizantes. O que se mostrou mais adequado foi a mistura gasosa de hidrogênio e n-hexano, a uma temperatura de 1050°C. Foi construído um aparato exclusivamente para estes ensaios de carburização, o qual também foi utilizado para realizar os tratamentos de difusão necessários para produzir alguns dos revestimentos. A avaliação da resistência a carburização dos revestimentos e materiais foi feita por medição da profundidade de avanço da zona de precipitação de carbetos causada pela carburização, feito com auxílio de microscópio ótico. Os resultados dos ensaios mostraram que as camadas de difusão de alumínio, o revestimento da liga Ni-50Cr, o revestimento cerâmico de Al2O3 e as ligas Fe-Cr-Al tiveram bom ou ótimo desempenho como barreiras contra a carburização. Os outros revestimentos ou permitiram a penetração de carbono no metal base ou causaram uma deposição exagerada de coque na superfície dos corpos de prova.

Diagnóstico da possível influência da atividade petrolífera em sedimentos de fundo da Bacia Piranhas-Açu, região Baixo Açu/RN

It is located in an area of increasing oil exploration, the region of the Lower Açu is at the mercy of a possible pollution generated by this economic activity, which includes various chemical substances harmful to health, such as metals. This thesis aims to, diagnose the areas of River Piranhas-Açu, a region of the Lower Açu, which are polluted by traces factors and more. In this study, it was determined the concentration of the chemica elements Al, CD, Cr, Cu, Fe, Mn, Ni, P, Pb, V and Zn, through the technique of ICP-OES analysis and the size of sediments and their contents organic matter. Were mapped by GPS, 12 points from collections. The interpretations of the results, together associating that allowed pollution to a possible contamination by oil activity. The results showed tha some regions have low concentrations of cadmium, lead, copper, manganese and zinc unable to promote damage to human health. However, there are places where the concentrations of certain metals chromium, iron and zinc are moderately polluted compared to the results with the reference values of literature and others that are highly polluted by iron. However, due to a greater number of wells in production in those locations, those higher concentrations, it can be suggested a possible influence of oi production in some areas with concentrations of chromium and lead are higher than the rest of the points of monitoring. Moreover, it is observed that the highest levels of metals found in sediment of finer texture and more organic matter content

Al-based anodic oxide films structure observation using field emission gun scanning electron microscopy

In the present work, the anodic oxide films of Al, Al-Cu 4.5% and Al-Si 6.5% alloys are formed using direct and pulse current. In the case of Al-Cu and Al-Si alloys, the electrolyte used contains sulfuric acid and oxalic acid, meanwhile for Al the electrolyte contains sulfuric acid only. Al-Cu alloy was submitted to a heat treatment in order to decrease the effect of inter metallic phase theta upon the anodic film structure. Fractured samples were observed using a field emission gun scanning electron microscope JSM-6330F at (LME)/Brazilian Synchrotron Light Laboratory (LNLS), Campinas, SP, Brazil. The oxide film images enable evaluation of the pore size and form with a resolution similar to the transmission electron microscope (TEM) resolution. It is also observed that the anodizing process using pulse current produces an irregular structure of pore walls, and by direct cur-rent it is produced a rectilinear pore wall. (c) 2005 Elsevier B.V. All rights reserved.

Uso e ocupação do solo e a concentração de metais pesados no sedimento e na água: bacia do rio Pitimbu

The accelerated growth of urban regions have produced relevant effects on water resources. Urban regions need an adequate institutional structure that can be able to face environmental demands and the adverse effects of land use on water resources. This study aims at analysing land use effects on heavy metals concentration in sediments and water, as well as making a comparative analysis involving water physical-chemical parameters. Applied methodology included both in loco water parameters measurement and water and bed sediment sampling at 8 sections along the fluvial system. Sample analysis was performed in laboratory in order to measure heavy metal concentrations. It was measured metal concentrations of Al, Cu, Pb, Cd, Fe, Ni and Zn. Once the samples were subjected to acid digestion (method 3050B), concentration values were measured by using atomic absorption spectrometry by flame (ICP-FLAA). The analysis results were compared with normative reference, these standards is intended to assess the risks of toxic substances in sediment and water management programs. The normative reference used in this work were: a) Ontario Ministry of the Environment and Energy (OMEE, 1993) b) Normative Netherlands (VROM, 2000); c) Normative Canadian (CCME, 1999); d) United States Environmental Protection Agency (USEPA, 1977), e) CONAMA Resolution No. 344/2004; f) CONAMA Resolution No. 357/2005. The high concentrations of iron (38,750 mg.g-1), Lead (1100 mg.g-1), Nickel (100 μg.g-1) and zinc (180 μg.g-1) detected sediments confirm the state of degradation of the aquatic system. Iron concentrations (1.08 mg.L-1), Aluminum (0.6 mg.L-1) and phosphorus (0.05 mg.L-1) present in the water are outside the established standards for human consumption

Geoquímica de sedimentos de fundo dos rios Trairí, Ararí e da Laguna Nísia Floresta (RN)

The metal concentrations (Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn ) and phosforus(P) had been determined analyzed through Plasma Inductively Coupled Plasme Mass Spectrometer for fine fraction, < 0,63 mm in 22 samples. The sample preparation for analysis had been make in the laboratories of geology of the UFRN. This samples procedures consists in register, dry, bolt and send to analysis in external laboratory (LAKEFIELD GEOSOL) in Belo Horizonte (MG, Brazil). The studied area involves the rivers Trairi, Ararí and Nísia Floresta lagoon, that empties in the sea, situated in the Rio Grande do Norte State. The study objects (Rivers Trairí, Ararí and Nísia Floresta lagoon) receive influences from urban dumpies, agrotoxics and fertilizer, shrimps tank, pastoral, with this, the concentrations of metals (Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, P, Zn) (except phosforus) in some points of the study area had been above of the value of reference what it leads to classify them as not polluted to moderately polluted, as the calculated Igeo. In front of discussed, can say about the environmental problems found in Trairi, Ararí and Nísia Floresta Lagoon are still in small scale, since when regard the studied área is over human activity effects

Desenvolvimento de uma metodologia para caracterização de amostras de sedimento: Rio Jundiaí RN

The study of sediment in water bodies presents great environmental importance, because of its ability to adsorb the pollutants, they may facilitate the understanding of the history of the current quality of the water system. Depending on how it is done the collection, analysis can show both a recent contamination as old. The detailed characterization of the sediment may reveal details that can understand how each type of pollutant interacts with the material given its composition. In this work it has developed a systematic methodology to characterize samples of sediment, with the aim to understand how a series of metal is distributed in different size fractions of the sediment. This study was conducted in five samples of sediment (P1, P2, P3a, P3B and P3c) collected in Jundiaí river, one of the most important tributaries of the river Potengi in the region of Macaíba, RN. The characterization was made with the samples previously sieved into meshes with different granulometries (+8#, -8+16#, -16+65# - 65+100#,-100+200#,-200+250# and -250#), using the following techniques: Analysis of specific surface area by BET method, determining the levels of organic matter (OM%) and humidity through the gravimetry and Analysis Thermogravimetric (TG), Infrared Spectroscopy in a Fourier transform (FTIR ), Analysis of X ray diffraction (XRD), analysis of heavy metals by optical emission spectrometry with the Argon Plasma (ICP-OES). The analyzed elements were Al, Cd, Cr, Cu, Fe, Mn, Ni, Zn and P. In addition to the techniques of characterization above, was also made the rebuilding of the samples P1, P2 and P3B in relation to the levels of organic matter and concentration of heavy metals. Then, the results of the recomposed samples were compared with those obtained in crude samples, showing great consistency. The gravimetry, used in determining the levels of organic matter, was not considered an appropriate method because the clay minerals present in the sediment samples analyzed fall apart in the same range of temperature (550-600 0C) used in roasting (600 0C). The results also showed the trend of organic matter and heavy metals to focus on the thin fractions, although the largest concentrations of metals are in intermediate fractions

Avaliação da influência da matéria orgânica, na determinação quantitativa de metais em amostras de sedimento, por espectrometria de absorção atômica e análise de metais traços por fluorescência de raios-X

The proposal of this work is to evaluate the influence of the organic matter on the results of the analyses of the metals (Zn, Pb, Al, Cu, Cr, Fe, Cd e Ni) for Atomic Absorption Spectrometry (AAS), so much in the extraction stage as in the reading using for that the chemometrics. They were used for this study sample of bottom sediment collected in river Jundiaí in the vicinity of the city of Macaíba-RN, commercial humus and water of the station of treatment of sewer of UFRN. Through the analyses accomplished by EAA it was verified that the interference of the organic matter happens in the extraction stage and not in the reading. With relationship to the technique of X Ray Fluorescence Spectrometry (XRFS), the present work has as intended to evaluate the viability of this technique for quantitative analysis of trace metals (Cr, Ni, Cu, Zn, Rb, Sr and Pb) in having leached obtained starting from the extraction with acqua regia for an aqueous solution. The used samples constitute the fine fraction (<0.063 mm) of sediments of swamp of the river Jundiaí. The preparation of tablets pressed starting from the dry residue of those leached it allowed your analysis in the solid form. This preliminary study shows that, in the case of the digestion chemistry partially of the fine fractions of bottom sediments used for environmental studies, the technique of applied EFRX to the analysis of dry residues starting from having leached with acqua regia, compared her it analyzes of the leached with ICP-OES, it presents relative mistakes for Cu, Pb, Sr and Zn below 10%

Uso da análise exploratória de dados na avaliação de modificadores químicos para determinação direta e simultânea de metais em álcool combustível por GFAAS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioaccumulation of metals in aquatic insects of streams located in areas with sugar cane cultivation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extraction and exchange behavior of metal species in therapeutically applied peat

The binding and availability of metals (Al, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Zn) in therapeutically applied peat (GroBes Gifhorner Moor, Sassenburg/North Germany) was characterized by means of a versatile extraction approach. Aqueous extracts of peat were obtained by a standardized batch equilibrium procedure using high-purity water (pH 4.5 and 5.0), 0.01 mol l(-1) calcium chloride solution, 0.0 1 mol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.01 mol l(-1) diethylenetriarnine pentaacetic acid (DTPA) solution as metal extractants. In addition, the availability of peat-bound metal species was kinetically studied by collecting aliquots of extracts after different periods of extraction time (5, 10, 15, 30, 60 and 120 min). Metal determinations were performed by atomic spectrometry methods (AAS, ICP-OES) and dissolved organic matter (DOM) was characterized by UV/Vis measurements at 254 and 436 nm, respectively. of the extractants studied Ca, Mg and Mn were the most available metals, in contrast to peat-bound Fe and Al. The relative standard deviation s(r) of the developed extraction procedures was mostly in the range of 4 to 20%, depending on the metal and its concentration in peat. A pH increase favored the extraction of metals and DOM from peat revealing complex extraction kinetics. Moreover, a competitive exchange between peat-bound metal species and added Cu(II) ions showed that > 100 mg of Cu(II) per 50 g wet peat was necessary to exchange the maximum of bound metals (e.g. 21.8% of Al, 3.9% of Fe, 79.0% of Mn, 81.9% of Sr, related to their total content). (C) 2002 Elsevier B.V. B.V. All rights reserved.

ASSESSMENT of POLYATOMIC INTERFERENCES ELIMINATION USING A COLLISION REACTION INTERFACE (CRI) FOR INORGANIC ANALYSIS of FUEL ETHANOL BY ICP-QMS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling the growth of LT and TL-oriented fatigue cracks in longitudinally and transversely pre-strained Al 2524-T3 alloy

The aluminum alloy 2524 (Al-Cu-Mg) was developed during the 90s mainly to be employed in aircraft fuselage panels, replacing the standard Al 2024. In the present analysis the fatigue crack growth (FCG) behavior of 2524-T3 was investigated, regarding the influence of three parameters: load ratio, pre strain and crack plane orientation of the material. The pre strain of aluminum alloys is usually performed in order to obtain a more homogeneous precipitates distribution, accompanied by an increase in the yield strength. In this work, it was evaluated the resistance of Al 2524-T3 sheet samples to the fatigue crack growth, having L-T and T-L crack orientations. FCG tests were performed under constant amplitude loading at three distinct positive load ratios. The three material conditions were tested: as received(AR), pre strained longitudinally (SL) and transversally (ST) in relation to rolling direction. In order to describe FCG behavior, two-parameter kinetic equations were compared: a Paris-type potential model and a new exponential equation introduced in a previous work conducted by our research group. It was observed that the exponential model, which takes into account the deviations from linearity presented by da/dN versus AK data, describes more adequately the FCG behavior of Al 224-T3 in relation to load ratio, pre strain effects and crack plane orientation. © 2011 Published by Elsevier Ltd.

Sediment quality assessment in a tropical estuary: The case of Ceará River, Northeastern Brazil

The present study aimed to assess the sediment quality in a tropical estuary located in the northeast of Brazil under semi-arid conditions and multiple sources of contamination, using both toxicity bioassays and metal distribution. The metal distribution followed a concentration gradient decreasing one order of magnitude from the inner station toward the outer estuary, with amounts in the following order: Fe > Al > Zn > Cr > Pb > Cu. The index of geoaccumulation indicated a metal enrichment in the Ceará river sediment, mainly at inner sites, considered from moderately to strongly contaminated by Al, Cu, Cr and Zn. Sediment samples were considered toxic by means of whole sediment tests with copepods (reproduction) and amphipods (survival), and also elutriate fraction and sediment-water interface with sea urchin embryos (development). Acute and chronic toxicity did not exhibit a significant correlation with metals, emphasizing the influence of other contaminants mainly related to the pollution sources installed in the mid-estuary. © 2013 Elsevier Ltd. All rights reserved.

Efeito do manejo e de níveis de lodo de esgoto na fertilidade do solo após tres aplicações

The agricultural use of sewage sludge as organic fertilizer is considered nowadays as on alternative of disposal, in the end of the residue in addition to possible environmental problems, it's using can decrease the mineral fertilizers and avoid provide organic matter to the soil. The objective of this study it was to evaluate the parameters of soil fertility under different managements and doses of sewage sludge after the third application of the residue. The experiment was carried out in São Manuel - SP, with the cultivation of sunflower in two consecutives cycles, followed by wheat and triticale without application of the residual, and in the following year with the application of sewage sludge and cultivated the black oats. It was adopted a randomized complete block design, consisting of six treatments and five repetitions defined as follows: T0 - without fertilization; T1 - mineral fertilizer nitrogen according to crop need, T2 - 50% of N from sewage sludge and 50% in mineral form, T3 - 100% of N from sewage sludge, T4 - 150% of N from sewage sludge, T5 - 200% of N derived from sewage sludge. Soil samples were collected in the end of the trial of oats. There were an increase in the levels of P, H + Al, CEC and OM, B, Cu, Fe, Mn, Zn as a function of increasing dose of sewage sludge. To V% and pH were decreased the values in the proportional soil to the increase of sludge dose until 24 and 22 t ha-1, respectively and after increasing the pH and V%.

Impacts of agricultural activities in remaining forest: Campinas/SP, Brazil

Forest fragmentation occurs normally in an area around the city or with high agricultural influence, such as the Forest of Quilombo that lies in Metropolitan Campinas/SP- Brazil. This forest is one such example since it is separated from the other forest fragments in the region for several types of human action. The objective of this study is to analyze the macro and micronutrients and soil edaphic insect fauna in the forest, pasture and sugar cane and inferring the impacts caused by the Mata do Quilombo cattle farming and urban expansion in chemical aspects of soil. Samples were collected in June/11, according to the procedure of method traps pitfall traps. In addition, at each sampling point four composite samples were collected for soil fertility analysis. Samples were collected at six points: pasture, degraded forest (near pasture), preserved forest (near pasture), degraded forest (near cane sugar), preserved forest (near cane sugar), and sugar cane sugar. The samples thus prepared were analyzed Ca, P, K, Mg, pH, organic matter, H + Al, Sum of Base (SB), Base Percentage Saturation (V%), Cation Exchange Capacity (CEC) and trace elements (S, B, Cu, Fe, Mg and Zn). Generally it can be seen that the group of organisms of soil fauna presented with little biodiversity. The number of individuals also shows little species, taxonomic groups showing the highest degree of impact that the remaining forest has suffered. Regarding the analysis of fertility it can be observed that the soil of the surrounding areas of the forest is under direct influence of agriculture. © 2013 WIT Press.