960 resultados para Aço inoxidável austenítico Cr-Mn (1.4376)
Resumo:
The proposed study is an attempt to quantify and study the seasonal and spatial variations in the distribution of Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb among the various geochemical phases in the surficial sediments of Chitrapuzha river. The study also estimates the concentration of heavy metals in dissolved, particulate and sediments and their variation in seasonal and spatial distribution. Chitrapuzha River originates as a small stream from the upper reaches of high ranges in the eastern boundary of Kerala, passes through the valley and finally joints in the Cochin backwaters. Numerous industrial units located along the banks of the river discharge treated and untreated effluents into the water. These are long standing local complaints about water pollution causing fish mortality and serious damage to agricultural crops resulting in extensive unemployment in the area. The river is thus of considerable social and economic importance.
Resumo:
The catalytic activity of some of the ABO3 (A = La, Pr and Sm, B= Cr, Mn, Fe, Co and Ni) perovskite-type oxides for the liquid phase reduction of ketone and oxidation of alcohol in 2-propanol medium has been studied. The data have been correlated with the surface electron donor properties of these oxides. The surface electron donor properties have been determined from the adsorption of electron acceptors of varying electron affinities on the oxide surface.
Resumo:
Rubber ferrite composites have the unique advantage of mouldability, which is not easily obtainable using ceramic magnetic materials. The incorporation of mixed ferrites in appropriate weight ratios into the rubber matrix not only modi es the dielectric properties of the composite but also imparts magnetic properties to it. Mixed ferrites belonging to the series of Mn(1 – x )Znx Fe2O4 have been synthesised with diVerent values of x in steps of 0·2, using conventional ceramic processing techniques. Rubber ferrite composites were prepared by the incorporation of these pre-characterised polycrystallineMn(1 – x )Znx Fe2O4 ceramics into a natural rubber matrix at diVerent loadings according to a speci c recipe. The processability of these elastomers was determined by investigating their cure characteristics. The magnetic properties of the ceramic llers as well as of the rubber ferrite composites were evaluated and the results were correlated. Studies of the magnetic properties of these rubber ferrite composites indicate that the magnetisation increases with loading of the ller without changing the coercive eld. The hardness of these composites shows a steady increase with the loading of the magnetic llers. The evaluation of hardness andmagnetic characteristics indicates that composites with optimummagnetisation and almost minimum stiVness can be achieved with a maximum loading of 120 phr of the ller at x=0·4. From the data on the magnetisation of the composites, a simple relationship connecting the magnetisation of the rubber ferrite composite and the ller was formulated. This can be used to synthesise rubber ferrite composites with predetermined magnetic properties
Resumo:
This paper explains the Genetic Algorithm (GA) evolution of optimized wavelet that surpass the cdf9/7 wavelet for fingerprint compression and reconstruction. Optimized wavelets have already been evolved in previous works in the literature, but they are highly computationally complex and time consuming. Therefore, in this work, a simple approach is made to reduce the computational complexity of the evolution algorithm. A training image set comprised of three 32x32 size cropped images performed much better than the reported coefficients in literature. An average improvement of 1.0059 dB in PSNR above the classical cdf9/7 wavelet over the 80 fingerprint images was achieved. In addition, the computational speed was increased by 90.18 %. The evolved coefficients for compression ratio (CR) 16:1 yielded better average PSNR for other CRs also. Improvement in average PSNR was experienced for degraded and noisy images as well
Resumo:
The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary
Resumo:
The distribution and accumulation of the rare earth elements (REE) in the sediments of the Cochin Estuary and adjacent continental shelf were investigated. The rare earth elements like La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu and the heavy metals like Mg, V, Cr, Mn, Fe, Cu, Zn, U, Th were analysed by using standard analytical methods. The Post-Archean Australian Shale composition was used to normalise the rare earth elements. It was found that the sediments were more enriched with the lighter rare earth elements than the heavier ones. The positive correlation between the concentrations of REE, Fe and Mn could explain the precipitation of oxyhydroxides in the study area. The factor analysis and correlation analysis suggest common sources of origin for the REEs. From the Ce-anomalies calculated, it was found that an oxic environment predominates in all stations except the station No. 2. The Eu-anomaly gave an idea that the origin of REEs may be from the feldspar. The parameters like total organic carbon, U/Th ratio, authigenic U, Cu/Zn, V/Cr ratios revealed the oxic environment and thus the depositional behaviour of REEs in the region
Resumo:
Little is known about the residual effects of crop residue (CR) and phosphorus (P) application on the fallow vegetation following repeated cultivation of pearl millet [Pennisetum glaucum (L.) R. Br.] in the Sahel. The objective of this study, therefore, was (i) to measure residual effects of CR, mulched at annual rates of 0, 500, 1000 and 2000 kg CR ha^-1, broadcast P at 0 and 13 kg P ha^-1 and P placement at 0, 1, 3, 5 and 7 kg P ha^-1 on the herbaceous dry matter (HDM) 2 years after the end of the experiment and (ii) to test a remote sensing method for the quantitative estimation of HDM. Compared with unmulched plots, a doubling of HDM was measured in plots that had received at least 500 kg CR ha^-1. Previous broadcast P application led to HDM increases of 14% compared with unfertilised control plots, whereas no residual effects of P placement were detected. Crop residue and P treatments caused significant shifts in flora composition. Digital analysis of colour photographs taken of the fallow vegetation and the bare soil revealed that the number of normalised green band pixels averaged per plot was highly correlated with HDM (r=0.86) and that red band pixels were related to differences in soil surface crusting. Given the traditional use of fallow vegetation as fodder, the results strongly suggest that for the integrated farming systems of the West African Sahel, residual effects of soil amendments on the fallow vegetation should be included in any comprehensive analysis of treatment effects on the agro-pastoral system.
Resumo:
We performed a first principles total energy investigation on the structural, electronic, and magnetic properties of 3d-transition metal-encapsulated adamantane molecules (TM@C(10)H(16). with TM = Cr, Mn, Fe, Co, and Ni). We find that the C-C interactions are strong enough to maintain the molecular rigidity upon TM incorporation, although outward relaxations and formation energies are large. We built a microscopic model that explains the electronic structure of those molecules. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Entre maio de 2001 e janeiro de 2002, foram realizadas coletas sazonais na lagoa Azul, Siderópolis, SC. Esta lagoa formou-se por lavra de mineração de carvão a céu aberto desativada. Foram avaliadas as concentrações de Cr, Mn, Ni, Zn e Fe na água e no sedimento. Estes metais, exceto o Fe, foram também analisados no músculo e no fígado das espécies dos peixes Oreochromis niloticus (tilápia) e Geophagus brasiliensis (acará). O objetivo foi avaliar a qualidade da lagoa, bem como, das espécies de peixes predominantes, devido a preocupação quanto ao consumo potencial das mesmas pela população do entorno. As análises do sedimento, quando comparada a locais não contaminados, indicam concentração elevada para Fe, Mn, Cr e Zn. No compartimento água as concentrações de Fe, Mn e Ni estão acima do estabelecido para a classe 2 da Resolução CONAMA 20/86. Conforme análise estatística, em ambos os compartimentos abióticos ocorrem diferenças significativas entre os 4 pontos amostrados, porém diferença sazonal ocorre somente para o compartimento água. O conteúdo de metais em peixes não apresenta diferença significativa entre as espécies analisadas, todavia entre os diferentes tecidos analisados, o fígado apresentou a maior concentração em ambas as espécies. Através das análises do músculo (parte comestível), foi possível avaliar o risco à saúde humana. Segundo a estimativa da ingestão diária, os peixes analisados não propiciam risco aparente de contaminação à população do entorno, conforme os critérios adotados para o teor dos metais avaliados.
Resumo:
Conforme a legislão brasileira, a gestão das águas subterrâneas está integrada à das águas superficiais nas quais estão localizadas os aqüiferos. Entretanto, não existe uma regulamentação específica que defina critérios e métodos de avaliação da qualidade ambiental, que caracterizem de forma completa este ambiente. A restrita bibliografia especializada que trata do assunto não é conclusiva quanto a aplicação de ensaios de toxidades aquática no monitoramente de águas subterrâneas. Assim, com o bjetivo de verificar a aplicabilidade dos ensaios de toxidadee padronizados para a avaliação da qualidade de águas subterrâneas potencialmente impactadas, foram avaliadas amostras provenientes de dois diferentes tipos de aqüiferos (livre e semiconfinado) localizados em uma área industrial da Região Metropolitana de Porto ALegre, RS, Brasil. Um total de 75 amostrras distribuídas em 19 poços de monitoramento foram analisadas quanto seus valores de pH, condutividade elétrica, cloretos, hidrocarbonetos, fenóis, nitrogênio amoniacal, sólidos dissolvidos totais e metais (Cd, Pb, Cu, Cr, Mn, Zn, Hg e Hi) e quanto à toxicidade crônica com Selenastrum capricornutum, Ceriodaphia dubia e Primephales promelas. As amostras foram coletadas semestralmente, sendo que o aqüifero livre foi amostrado de janeiro de 2001 a janeiro de 2003 e o aqüifero semiconfinado de fevereiro de 2002 a janeiro de 2003. Os resultados dos parâmetros químicos avaliados foram comparados, quando possível, a diferentes concentrações tidas como valores de referência (Portaria 1469/00 do Ministério da Saúde - Potabilidade), Lista Holandesa (valores de alerta - T) e Resolução nº 20/86 so CONAMA (Classe 2). A comparação dos resultados das anállises químicas diferentes de contaminação. Os valores de nitrogênio amoniacal, condutividade, fenóis, e hidrocarbonetos totais foram signitivamente maiores no aqüifero livre quando comparado ao aqüifero semiconfinado, enquanto os metais manganês e zinco apresentaram maiores concentrações no aqüifero semiconfinado. Para os demais parâmetros não foram detectadas diferenças estatiscamente significativas. Os resultados das análises ecotoxicológicas dos poços dos poços de monitoramente do aqüifero livre e semiconfinado acompanharam as diferenças químicas encontradas para os dois aqüiferos, demonstrando diferenças na qualidade das águas subterrâneas avaliadas Observou-se claramente uma maior incidência de valores negativos (inibição de crescimento ou reprodução), para os três níveis trtóficos, para as amostrras do aqüifero livre, quando em comparação as amostrras do aqüifero semiconfinado. Diferenças também foram verificadas nas respostas dos três niveis tróficos utilizadas, observando-se uma maior freqüência de amostrras tóxicas para alga S. capricormutum. O trrabalho apresenta ainda algumas correlações significativas ( =0,05) entrer as concentrações de determinados parâmetros com as toxidades detectados, tais como toxidade para C. dubla e nitrogênio amoniacal (r=0,39) e fenóis (r=0,394), toxidade para S. capricornutum e manganês (r=0,298), condutividade (r=0,393) e cobre (r=0,388) e Toxidade para P. promelas e pH (r=0, 484). Uma possível influência da matriz do solo sobre a toxicidade apresentada para S. capricornutum também é discutida. O trabalho conclui que ensaios de toxicidade com organismos aquáticos pode aplicados no monitoramento de águas subterrâneas. Entretanto, a interpretação dos resultados e as decisões a serem tomadas devem ser mais criteriosas, considerando-se um possível efeito da matriz original do solo sobre os organismos-teste utlizados.
Resumo:
The Brazil is the third largest producer of cashew nuts in the world. Despite the social and economic importance of the cashew nut, its production is still carried out artisanally. One of the main problems encountered in the cashew production chain are the conditions under which the roasting of the nut occurs to obtain the kernel from the shell. In the present study was conducted a biomonitoring of the genotoxic and cytotoxicity effects associated with the elements from the cashew nut roasting in João Câmara - RN, semi-arid region of Brazil. To assess the genotoxic was used the bioassay of micronucleus (MN) in Tradescantia pallida. In addition, it was performed a comparative between the Tradescantia pallida and KU-20 and other biomarkers of DNA damage, such as the nucleoplasmic bridges (NBP) and nuclear fragments (NF) were quantified. The levels of particulate matter (PM1.0, PM2.5, PM10) and black carbon (BC) were also measured and the inorganic chemical composition of the PM2.5 collected was determined using X-ray fluorescence spectrometry analysis and the assessment of the cytotoxicity by MTT assay and exclusion method by trypan blue. . For this purpose, were chosen: the Amarelão community where the roasting occurs and the Santa Luzia farm an area without influence of this process. The mean value of PM2.5 (Jan 2124.2 μg/m3; May 1022.2 μg/m3; Sep 1291.9 μg/m3) and BC (Jan 363.6 μg/m3; May 70.0 μg/m3; Sep 69.4 μg/m3) as well as the concentration of the elements Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br and Pb obtained at Amarelão was significantly higher than at Santa Luzia farm. The genotoxicity tests with T. pallida indicated a significant increase in the number of MN, NBP and NF and it was found a negative correlation between the frequency of these biomarkers and the rainfall. The concentrations of 200 μg/mL and 400 μg/mL of PM2.5 were cytotoxic to MRC-5 cells. All together, the results indicated genotoxicity and citotoxicity for the community of Amarelão, and the high rates of PM2.5 considered a potential contributor to this effect, mainly by the high presence of transition metals, especially Fe, Ni, Cu, Cr and Zn, these elements have the potential to cause DNA damage. Other nuclear alterations, such as the NPBs and NFs may be used as effective biomarkers of DNA damage in tetrads of Tradescantia pallida. The results of this study enabled the identification of a serious occupational problem. Accordingly, preventative measures and better practices should be adopted to improve both the activity and the quality of life of the population. These measures are of fundamental importance for the sustainable development of this activity.
Resumo:
For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism
Resumo:
Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test
Resumo:
A couve-flor é uma das principais hortaliças cultivadas no Brasil. O conhecimento do crescimento e acúmulo de nutrientes pela cultura poderá ser útil no seu manejo e na adubação. Com o objetivo de determinar o acúmulo e a exportação de nutrientes pela cultura da couve-flor 'Verona', conduziu-se um experimento em solo, no período de 23 de fevereiro a 05 de junho de 2006. O delineamento do experimento foi em blocos casualizados com três repetições. O experimento constou inicialmente de 480 plantas divididas em três blocos. Para cada época de amostragem foram retiradas duas plantas por bloco. Foram realizadas cinco amostragens da parte vegetativa das plantas a cada 14 dias após o transplante e três amostragens das inflorescências a cada quatro dias, após o início de sua formação, sendo avaliado o crescimento da planta e o acúmulo de nutrientes nas inflorescências, no caule, nos limbos foliares e nos pecíolos. As plantas apresentaram crescimento e acúmulo de massa seca contínuos. O período de maior acúmulo de nutrientes foi do início da formação da inflorescência até a colheita. A ordem decrescente dos nutrientes acumulados pela cultura foi: N>K>Ca>S>Mg>P>Fe>Mn>Zn>B>Cu. A exportação de nutrientes (g por planta de macronutrientes e mg por planta para micronutrientes) pelas inflorescências foi de 3,50 de N; 0,296 de K; 0,06 de Ca; 0,290 de S; 0,032 de Mg; 0,249 de P; 2,08 de Fe; 0,375 de Mn; 1,01 de Zn; 1,45 de B e 0,07 de Cu.
Resumo:
Devido a numerosas discrepâncias nos resultados de estudos experimentais relativos à interação flúor-manganês, propusemo-nos a verificar se a adição de manganês 5 água fluoretada (1 ppm), em diferentes proporções fluor-manganês, levaria a uma diferente fixaçao do halogênio. Para tanto, 24 ratos Wistar, recém-desmamados, foram mantidos em dieta padrão de caseína a 27%, recebendo na sua água de consumo: 1) H2O destilada (controle); 2) 1,0 ppm de flúor: 3) 1,0 ppm de flúor + 0,5 ppm de manganês (F:Mn = 2,0); 4) 1,0 ppm de flúor +1,0 ppm de manganês (F: Mn = 1,0). Foram anotados o peso ganho e o consumo de alimento e água, durante os 60 dias de experimento, após o qual as patas traseiras, dos animais sacrificados, foram autoclavadas e desossadas, e os femures retirados. Posteriormente, foram estes submetidos à secagem, extração da gordura, pulverização e analise do flúor fixado. Também foram efetuadas analises da composição centesimal da ração e de flúor e manganês nesta e nas diferentes águas de consumo. Os resultados de percentagem do flúor ingerido fixado nos femures, foram analisados estatisticamente pelo teste não-paramétrico de Kruskal-Wallis (níveis de 1% e 5%) mostrando que, para as proporções consideradas, o flúor na taxa de 1 ppm, o manganês, quando administrado após o desmame, parece não afetar a fixaçao do flúor. Contudo, faz-se necessário dar continuidade aos estudos com novas proporções e taxas mais elevadas de flúor e manganês.