A new method for real time computation of power quality indices based on instantaneous space phasors

One of the important issues about using renewable energy is the integration of dispersed generation in the distribution networks. Previous experience has shown that the integration of dispersed generation can improve voltage profile in the network, decrease loss etc. but can create safety and technical problems as well, This work report the application of the instantaneous space phasors and the instantaneous complex power in observing performances of the distribution networks with dispersed generators in steady state. New IEEE apparent power definition, the so called Buccholz-Goodhue apparent power, as well as new proposed power quality (oscillation) index in the three-phase distribution systems with unbalanced loads and dispersed generators, are applied. Results obtained from several case studies using IEEE 34 nodes test network are presented and discussed.

Utilização de água residuária do processo pós-colheita do café na produção de mudas de cafeeiro

Intending to achieve better results on coffee production, the coffee producers began, since the 80s, to process the coffee postharvest, in order to ensure product's superior quality. However, with the processing, other problem appeared, the contamination of rivers, creeks, soil and water table from coffee wastewater (ARC). This paper had as main objective to use the ARC on the coffee plants' production verifying its viability and if the ARC is able to supply the coffee potassium requirements when they don't receive potassium chloride in the organic compound. The work was developed at Faculdade de Ciências Agronômicas - UNESP, Botucatu-SP, in a greenhouse located at Departamento de Engenharia Rural. The work consisted of 10 treatments on a 5×2 factorial (5 wastewater proportions of coffee after the harvest processing - 0%, 25%, 50%, 75% and 100% - and potassium chloride presence or absence in the composition), with 4 repetitions with a completely randomized statistical design. The ARC was applied each 48 hours in an irrigation depth of 10 mm. After 6 months, the plants' vegetative characteristic had been evaluated as well the chemical characteristics of the compound and of the plants. We observed that the treatments with potassium chloride presence showed worse vegetative characteristics compared with treatments which did not have KCl in its composition. Moreover, with the increase of the wastewater dosage, it happened a decrease in the vegetative characteristics, however an addition in the chemical characteristics of the compound. Also, the treatments without KCl presence and with 0% and 25% of coffee wastewater had been statistically equal, showing the viability in the use of the ARC in the production of coffee plants, since the compound does not contain KCl and that the water used in the composition is a mixture of 25% of ARC with 75% of common water.

Produção e Qualidade Física dos Frutos do Abacaxi sob Diferentes Lâminas e Frequências de Irrigação

The objective of this study was to evaluate the performance of pineapple cultivar Smooth Cayenne as the physical production and the quality of the fruit when subjected to different frequencies of water dpeth and soil water in Triângulo Mineiro - Uberaba-MG. The experimental area soil is Oxisol, clay loam sandy and soft undulating local relief. A randomized block design in a factorial 4 x 2 with four levels of soil water depth (50%, 75%, 100% and 125%) of crop evapotranspiration (ETc) and two irrigation frequencies (1 day and 3 days = F1 = F2) and four replications was utilized. The crop productivity, number of seedlings, mean weight, diameter, and hardness of the fruit, plus water use efficiency were evaluated. Productivity was not significantly affected by the water depth and by the frequency of water applied; however the fruit shell resistance, the efficiency of water use, and ratoon seedlings were significantly influenced by irrigation, the water depth of 50% of the crop evapotranspiration (ETC) provided greater efficiency of water use for the production of pineapple fruit.

Validation of analytical methodology for quantification of cefazolin sodium pharmaceutical dosage form by high performance liquid chromatography to be applied for quality control in pharmaceutical industry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização do grau de impermeabilização relativa das vertentes de uma bacia hidrográfica urbanizada: o exemplo do Córrego da Servidão - Rio Claro (SP)

The expansion and growth of towns affect the hydrology of watersheds included in the urban environment, impacting mainly the slopes and river channels. This interference can be in soil waterproofing, the runoff of rainwater, the extinction of surface drainage, the dynamics of flooding processes, etc. For studies concerning the hydrological behavior of watersheds, Remote Sensing techniques have been used to support the acquisition and analysis of data and also to generate new information from the integration of these data. In this context, the study aimed to characterize scenarios and conduct comparative analysis of urban occupation of parts of watershed the Córrego da Servidão, in Rio Claro (SP) and analyze the degree of waterproofing on the ground. With the support of the soil categories of waterproofing listed in Soil Conservation Service (S.C.S / USDA) this analysis was conducted, considering the scenarios of 1958 and 2006, through processes of interpretative analysis of panchromatic and color images aerofotogramétricas. The analysis, data integration and mapping of the watershed area were conducted in an environment of a Geographic Information System (GIS). Maps were obtained to characterize land cover in the watershed, showing the evolution of urban occupation, as well as indicating the densely built and waterproofed

Nursery water management on initial development and quality of Piptadenia gonoacantha seedlings

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bacteriological quality of irrigation water from vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, SP

This work aimed to assess the bacteriological quality of water used in the irrigation of vegetable gardens in the municipalities of Araraquara, Boa Esperança do Sul and Ibitinga, São Paulo, Brazil. A total of 80 samples of water used in the irrigation of 40 vegetable gardens were analyzed, two samples coming from each vegetable garden. They were collected at the same site in different months, which resulted in two sample collection groups. The most probable number (MPN/100mL) of total coliforms, thermotolerant coliforms and enterococci was identifi ed by means of the multiple tube technique. The analysis of the fi rst group samples showed quantities of thermotolerant coliforms above the amount allowed by current law for irrigation water (CONAMA Resolution n. 357) in nine cases. The owners of those vegetable gardens were then instructed in water disinfection procedures. After the analysis of the second group samples, it was noticed that only one sample did not meet the quality standards, and it was collected at a site where no disinfection procedure had been carried out. According to the results, 77.5% of the vegetable gardens were using water whose samples meet the quality standards. After the owners were instructed with regard to disinfection procedures, that number changed to 97.5%, which confi rms the importance of controlling and supervising irrigation water quality

Proposta de captação de água de chuva de para fins não potáveis em projetos residenciais

Water is an economic, strategic and social valuable resource of the utmost importance to society. This renewable natural resource is increasingly scarce with the growing of populations, industries and agriculture, in addition to the pollution surface and underground water and the waste have aggravated this situation. Investments in the sector of water resources so that this resource meets in quantity and quality the demand from its multiple uses, represent a significant portion of national and regional budgets. Therefore, the use of alternative sources of water capture can reduce the pressure on conventional public water supply systems. In this work was designed and executed a rain water collection system to a residence in the city of Barueri (SP), which can be applied to other residences. In this system, the rooftop of the residence was used as the waterproof and capture area. The gutter and the PVC conductors were used for driving the water to two connected reservoirs. The stored water was designed to address activities that are not potable, such as washing clothes and external areas and garden irrigation. The system showed economic viability, with 34-month return of investment time, wherein after that period, in addition to environmental and social benefits derived from the implementation of the project, the economy made with the payment of public supply rates should be considered. This rainwater capture system is inexpensive and uses materials available in the market. Therefore, its application to a greater number of households should be encouraged as a measure of sustainable water management

Water Quality Variability in a Bioswell and Concrete Drainage Pipe, Southwest Lincoln, Nebraska

Abstract The goal of this project is to evaluate the effectiveness of bioswells in protecting water quality from urban runoff. The hypothesis tested in this project is that water in bioswells improves water quality. Water quality in both a bioswell and an underground concrete lined ditch, both containing ground and surface water, were tested for certain water quality parameters. These parameters consisted of: Dissolved Oxygen, pH, water temperature, weather temperature, Total Dissolved Solids, Specific Conductivity, Alkalinity, Total Dissolved Carbon, Chemical Oxygen Demand, and depth and width of the sampling site. An additional contaminant that was looked at was motor oil. This was measured by comparing Total Organic Carbon with Chemical Oxygen Demand. A variety of different methods to measure the water quality parameters were utilized. The concrete site had more stable readings, but much higher water temperatures. However, the bioswell water is mainly from surface water runoff, and the underground concrete lined pipe is from underground water, so the two cannot be directly compared. The bioswell had high readings, especially pertaining to Oxygen Demand, Total Organic Carbon, and Specific Conductivity in early test dates. But, these readings improved as they were filtered though the bioswell. As plant activity increased and the weather began to warm up there were more stable readings. It is concluded that bioswells are an effective way to reduce problems associated with urban runoff pertaining to certain water quality parameters.

Proposta de captação de água de chuva de para fins não potáveis em projetos residenciais

Water is an economic, strategic and social valuable resource of the utmost importance to society. This renewable natural resource is increasingly scarce with the growing of populations, industries and agriculture, in addition to the pollution surface and underground water and the waste have aggravated this situation. Investments in the sector of water resources so that this resource meets in quantity and quality the demand from its multiple uses, represent a significant portion of national and regional budgets. Therefore, the use of alternative sources of water capture can reduce the pressure on conventional public water supply systems. In this work was designed and executed a rain water collection system to a residence in the city of Barueri (SP), which can be applied to other residences. In this system, the rooftop of the residence was used as the waterproof and capture area. The gutter and the PVC conductors were used for driving the water to two connected reservoirs. The stored water was designed to address activities that are not potable, such as washing clothes and external areas and garden irrigation. The system showed economic viability, with 34-month return of investment time, wherein after that period, in addition to environmental and social benefits derived from the implementation of the project, the economy made with the payment of public supply rates should be considered. This rainwater capture system is inexpensive and uses materials available in the market. Therefore, its application to a greater number of households should be encouraged as a measure of sustainable water management

Desempenho do cultivo da berinjela em plantio direto submetida a diferentes lâminas de irrigação

Este estudo foi conduzido no município de Seropédica, RJ, com o objetivo de se determinar, em cultivo orgânico e sistema de plantio direto, a produtividade da cultura da berinjela sob diferentes lâminas de irrigação e sistemas de cultivo (consorciada com leguminosa e solteira). O delineamento experimental adotado foi o de blocos ao acaso, no esquema de parcela subdividida com quatro repetições caracterizando, na parcela, os tratamentos equivalentes à lâmina de irrigação (40; 70; 100 e 120% ETc) e, na subparcela, os sistemas de cultivo consorciado com feijão caupi e solteiro. Ambos os sistemas de cultivo não influenciaram a produtividade final da berinjela; no entanto, considerando as diferentes lâminas, a maior produtividade comercial foi de 65,41 Mg ha-1, obtida para uma lâmina total de 690,04 mm (106,8% ETc). A menor lâmina aplicada resultou em qualidade inferior dos frutos em relação às maiores lâminas, sendo a taxa de descarte dos frutos de 3 e 14%, respectivamente, para a maior e a menor lâmina.

Tools and methods for the quality assurance of force platforms in human movement analysis

The human movement analysis (HMA) aims to measure the abilities of a subject to stand or to walk. In the field of HMA, tests are daily performed in research laboratories, hospitals and clinics, aiming to diagnose a disease, distinguish between disease entities, monitor the progress of a treatment and predict the outcome of an intervention [Brand and Crowninshield, 1981; Brand, 1987; Baker, 2006]. To achieve these purposes, clinicians and researchers use measurement devices, like force platforms, stereophotogrammetric systems, accelerometers, baropodometric insoles, etc. This thesis focus on the force platform (FP) and in particular on the quality assessment of the FP data. The principal objective of our work was the design and the experimental validation of a portable system for the in situ calibration of FPs. The thesis is structured as follows: Chapter 1. Description of the physical principles used for the functioning of a FP: how these principles are used to create force transducers, such as strain gauges and piezoelectrics transducers. Then, description of the two category of FPs, three- and six-component, the signals acquisition (hardware structure), and the signals calibration. Finally, a brief description of the use of FPs in HMA, for balance or gait analysis. Chapter 2. Description of the inverse dynamics, the most common method used in the field of HMA. This method uses the signals measured by a FP to estimate kinetic quantities, such as joint forces and moments. The measures of these variables can not be taken directly, unless very invasive techniques; consequently these variables can only be estimated using indirect techniques, as the inverse dynamics. Finally, a brief description of the sources of error, present in the gait analysis. Chapter 3. State of the art in the FP calibration. The selected literature is divided in sections, each section describes: systems for the periodic control of the FP accuracy; systems for the error reduction in the FP signals; systems and procedures for the construction of a FP. In particular is detailed described a calibration system designed by our group, based on the theoretical method proposed by ?. This system was the “starting point” for the new system presented in this thesis. Chapter 4. Description of the new system, divided in its parts: 1) the algorithm; 2) the device; and 3) the calibration procedure, for the correct performing of the calibration process. The algorithm characteristics were optimized by a simulation approach, the results are here presented. In addiction, the different versions of the device are described. Chapter 5. Experimental validation of the new system, achieved by testing it on 4 commercial FPs. The effectiveness of the calibration was verified by measuring, before and after calibration, the accuracy of the FPs in measuring the center of pressure of an applied force. The new system can estimate local and global calibration matrices; by local and global calibration matrices, the non–linearity of the FPs was quantified and locally compensated. Further, a non–linear calibration is proposed. This calibration compensates the non– linear effect in the FP functioning, due to the bending of its upper plate. The experimental results are presented. Chapter 6. Influence of the FP calibration on the estimation of kinetic quantities, with the inverse dynamics approach. Chapter 7. The conclusions of this thesis are presented: need of a calibration of FPs and consequential enhancement in the kinetic data quality. Appendix: Calibration of the LC used in the presented system. Different calibration set–up of a 3D force transducer are presented, and is proposed the optimal set–up, with particular attention to the compensation of non–linearities. The optimal set–up is verified by experimental results.

NMR, Metabonomics and Molecular Profiles: Applications to the Quality Assessment of Foodstuffs

Nuclear Magnetic Resonance (NMR) is a branch of spectroscopy that is based on the fact that many atomic nuclei may be oriented by a strong magnetic field and will absorb radiofrequency radiation at characteristic frequencies. The parameters that can be measured on the resulting spectral lines (line positions, intensities, line widths, multiplicities and transients in time-dependent experi-ments) can be interpreted in terms of molecular structure, conformation, molecular motion and other rate processes. In this way, high resolution (HR) NMR allows performing qualitative and quantitative analysis of samples in solution, in order to determine the structure of molecules in solution and not only. In the past, high-field NMR spectroscopy has mainly concerned with the elucidation of chemical structure in solution, but today is emerging as a powerful exploratory tool for probing biochemical and physical processes. It represents a versatile tool for the analysis of foods. In literature many NMR studies have been reported on different type of food such as wine, olive oil, coffee, fruit juices, milk, meat, egg, starch granules, flour, etc using different NMR techniques. Traditionally, univariate analytical methods have been used to ex-plore spectroscopic data. This method is useful to measure or to se-lect a single descriptive variable from the whole spectrum and , at the end, only this variable is analyzed. This univariate methods ap-proach, applied to HR-NMR data, lead to different problems due especially to the complexity of an NMR spectrum. In fact, the lat-ter is composed of different signals belonging to different mole-cules, but it is also true that the same molecules can be represented by different signals, generally strongly correlated. The univariate methods, in this case, takes in account only one or a few variables, causing a loss of information. Thus, when dealing with complex samples like foodstuff, univariate analysis of spectra data results not enough powerful. Spectra need to be considered in their wholeness and, for analysing them, it must be taken in consideration the whole data matrix: chemometric methods are designed to treat such multivariate data. Multivariate data analysis is used for a number of distinct, differ-ent purposes and the aims can be divided into three main groups: • data description (explorative data structure modelling of any ge-neric n-dimensional data matrix, PCA for example); • regression and prediction (PLS); • classification and prediction of class belongings for new samples (LDA and PLS-DA and ECVA). The aim of this PhD thesis was to verify the possibility of identify-ing and classifying plants or foodstuffs, in different classes, based on the concerted variation in metabolite levels, detected by NMR spectra and using the multivariate data analysis as a tool to inter-pret NMR information. It is important to underline that the results obtained are useful to point out the metabolic consequences of a specific modification on foodstuffs, avoiding the use of a targeted analysis for the different metabolites. The data analysis is performed by applying chemomet-ric multivariate techniques to the NMR dataset of spectra acquired. The research work presented in this thesis is the result of a three years PhD study. This thesis reports the main results obtained from these two main activities: A1) Evaluation of a data pre-processing system in order to mini-mize unwanted sources of variations, due to different instrumental set up, manual spectra processing and to sample preparations arte-facts; A2) Application of multivariate chemiometric models in data analy-sis.

Effects of Resources Exploitation on Water Quality: case studies in Salt Water Intrusion and Acid Mine Drainage

Throughout the world, pressures on water resources are increasing, mainly as a result of human activity. Because of their accessibility, groundwater and surface water are the most used reservoirs. The evaluation of the water quality requires the identification of the interconnections among the water reservoirs, natural landscape features, human activities and aquatic health. This study focuses on the estimation of the water pollution linked to two different environmental issues: salt water intrusion and acid mine drainage related to the exploitation of natural resources. Effects of salt water intrusion occurring in the shallow aquifer north of Ravenna (Italy) was analysed through the study of ion- exchange occurring in the area and its variance throughout the year, applying a depth-specific sampling method. In the study area were identified ion exchange, calcite and dolomite precipitation, and gypsum dissolution and sulphate reduction as the main processes controlling the groundwater composition. High concentrations of arsenic detected only at specific depth indicate its connexion with the organic matter. Acid mine drainage effects related to the tin extraction in the Bolivian Altiplano was studied, on water and sediment matrix. Water contamination results strictly dependent on the seasonal variation, on pH and redox conditions. During the dry season the strong evaporation and scarce water flow lead to low pH values, high concentrations of heavy metals in surface waters and precipitation of secondary minerals along the river, which could be released in oxidizing conditions as demonstrated through the sequential extraction analysis. The increase of the water flow during the wet season lead to an increase of pH values and a decrease in heavy metal concentrations, due to dilution effect and, as e.g. for the iron, to precipitation.

An AMSTAR assessment of the methodological quality of systematic reviews of oral healthcare interventions published in the Journal of Applied Oral Science (JAOS)

Systematic reviews are not an assembly of anecdotes but a distillation of current best available evidence on a particular topic and as such have an important role to play in evidence-based healthcare. A substantial proportion of these systematic reviews focus on interventions, and are able to provide clinicians with the opportunity to understand and translate the best available evidence on the effects of these healthcare interventions into clinical practice. The importance of systematic reviews in summarising and identifying the gaps in evidence which might inform new research initiatives is also widely acknowledged. Their potential impact on practice and research makes their methodological quality especially important as it may directly influence their utility for clinicians, patients and policy makers. The objectives of this study were to identify systematic reviews of oral healthcare interventions published in the Journal of Applied Oral Science (JAOS) and to evaluate their methodological quality using the evaluation tool, AMSTAR.