952 resultados para 270306 Microbial Genetics


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Química e Bioquímica

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tese de doutoramento em Antropologia, especialidade em Antropologia Biológica e Etnoecologia

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertation presented to obtain the Ph.D degree in Biology

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A malária é reconhecida como uma das principais forças selectivas a actuar na história recente no genoma humano. Inúmeros polimorfismos genéticos têm sido descritos como protectores contra a gravidade da malária, como o alelo HbS (designado de traço falciforme) e o alelo G6PD A- (associado à deficiência de G6PD). Mais recentemente, também a deficiência de PK foi associada com a protecção contra a malária. Evidências desta associação foram obtidas em estudos com modelos de roedor e estudos in vitro utilizando GV humanos deficientes em PK. Até à data, não foram obtidos dados em populações humanas que revelem esta associação: ainda não foi identificada uma variante de PK com uma prevalência elevada em regiões endémicas de malária e não foram identificadas marcas de selecção na região do gene que codifica para a PK (gene PKLR). Além disso, os mecanismos subjacentes à protecção contra a malária por deficiências enzimáticas dos GV não estão bem esclarecidos. Assim, os objectivos do presente estudo foram: investigar os polimorfismos genéticos humanos com associação com a malária em Cabo Verde; pesquisar marcas de selecção da malária na região do gene PKLR em populações Africanas; determinar a frequência da deficiência em PK e identificar uma eventual variante da enzima que possa estar sob selecção positiva em regiões endémicas de malária; avaliar o efeito das duas deficiências enzimáticas (PK e G6PD) na invasão e maturação do parasita em culturas in vitro de Plasmodium usando GV normais e deficientes; e analisar o perfil proteómico de GV infectados e não infectados, normais e com deficiência (em PK e G6PD), bem como de parasitas isolados de GV tanto deficientes como normais. Em Cabo Verde (área epidémica), não foram identificadas marcas de selecção pela malária, através da análise dos vários polimorfismos. No entanto, quando a análise foi realizada em dois países endémicos (Angola e Moçambique), foram detectadas várias marcas de selecção: a genotipagem de microssatélites (STRs) e polimorfismos de base única (SNPs) localizados na vizinhança do gene PKLR revelou uma diferenciação consideravelmente maior entre as populações Africana e Europeia (Portuguesa), do que a diferenciação determinada aquando da utilização de marcadores genéticos neutros. Além disso, uma região genómica de maior amplitude apresentou um Desequilíbrio de Ligação (LD) significativo no grupo de malária não grave (e não no grupo de malária grave), sugerindo que a malária poderá estar a exercer pressão selectiva sobre a região do genoma humano que envolve o gene PKLR. No estudo que incidiu na determinação da prevalência da deficiência de PK no continente Africano (realizado em Moçambique), esta revelou-se elevada - 4,1% - sendo o valor mais elevado descrito até ao momento a nível mundial para esta enzimopatia. Na pesquisa de mutações que pudessem estar na causa deste fenótipo (baixa actividade de PK), foi identificada uma mutação não sinónima 829G>A (277Glu>Lys), significativamente associada à baixa actividade enzimática. Esta mutação foi também identificada em Angola, São Tomé e Príncipe e Guiné Equatorial, onde a frequência de portadores heterozigóticos foi entre 2,6 e 6,7% (valores que se encontram entre os mais elevados descritos globalmente para mutações associadas à deficiência em PK). Não foi possível concluir acerca da associação entre a deficiência de PK e o grau de severidade da malária e da associação entre o alelo 829A e a mesma, devido ao baixo número de amostras. Os resultados dos ensaios de invasão/maturação do parasita sugeriram que, nos GV com deficiência de PK ou G6PD, a invasão (onde está envolvida a membrana do GV hospedeiro e o complexo apical do parasita) é mais relevante para a eventual protecção contra a malária do que a maturação. Os resultados da análise proteómica revelaram respostas diferentes por parte do parasita nas duas condições de crescimento (GV com deficiência de PK e GV com deficiência de G6PD). Esta resposta parece ser proporcional à gravidade da deficiência enzimática. Nos parasitas que cresceram em GV deficientes em G6PD (provenientes de um indivíduo assintomático), a principal alteração observada (relativamente às condições normais) foi o aumento do número de proteínas de choque térmico e chaperones, mostrando que os parasitas responderam às condições de stress oxidativo, aumentando a expressão de moléculas de protecção. Nos parasitas que cresceram em condições de deficit de PK (GV de indivíduo com crises hemolíticas regulares, dependente de transfusões sanguíneas), houve alteração da expressão de um maior número de proteínas (relativamente ao observado em condições normais), em que a maioria apresentou uma repressão da expressão. Os processos biológicos mais representados nesta resposta do parasita foram a digestão da hemoglobina e a troca de proteínas entre hospedeiro e parasita/remodelação da superfície do GV. Além disso, uma elevada percentagem destas proteínas com expressão alterada está relacionada com as fendas de Maurer, que desempenham um papel importante na patologia da infecção malárica. É colocada a hipótese de que a protecção contra a malária em GV deficientes em PK está relacionada com o processo de remodelação da membrana dos GV pelo parasita, o que pode condicionar a invasão por novos parasitas e a própria virulência da malária. Os resultados da análise do proteoma dos GV contribuirão para confirmar esta hipótese.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Polyhydroxyalkanoates (PHAs) are biosynthetic polyesters, biodegradable and biocompatible making them of great interest for industrial purposes. The use of low value substrates with mixed microbial communities (MMC) is a strategy currently used to decrease the elevated PHA production costs. PHA production process requires an important step for selection and enrichment of PHA-storing microorganisms which is usually carried out in a Sequencing Batch Reactor (SBR). The aim of this study was to optimize the PHA accumulating culture selection stage using a 2-stage Continuous Stirrer Tank Reactor (CSTR) system. The system was composed by two separate feast and famine bioreactors operated continuously, mimicking the feast and famine phases in a SBR system. Acetate was used as carbon source and biomass seed was highly enriched in Plasticicumulans acidivorans obtained from activated sludge. The system was operated under two different sets of conditions (setup 1 and 2), maintaining a system total retention time of 12 hours and an OLR of 2.25 Cmmol/L.h-1. An average PHB-content of 3.3 % wt was obtained in setup 1 and 4.8% wt in setup 2. Several other experiments were performed in order to better understand the continuous system behaviour, using biomass from the continuous system. With the fed-batch experiment a maximum of 8.1% PHB was stored and the maximum substrate uptake and specific growth rates obtained in the growth experiment (1.15 Cmol Cmol-1.h-1 and 0.53 Cmol Cmol-1.h-1) were close to the ones from continuous system (1.12 Cmol Cmol-1.h-1 and 0.59 Cmol Cmol-1.h-1). The microbial community was characterized trough microscopic visualization, Denaturing Gradient Gel Electrophoresis (DGGE) analysis and Fluorescent in situ hybridization (FISH). The last studied performed mimicked the continuous system by building up a SBR system with all the same operational conditions while adding an extra acetate dosage during the 12 h cycle, simulating the substrate passing from the feast to the famine reactors under continuous operation. It was shown that possibly the continuous system was not able to efficiently select for PHB storing organisms under the operational conditions imposed, although the selected culture was capable of consuming the substrate and grow fast. This main conclusion might have resulted from two major factors affecting the system performance: the ammonium concentration in the Feast reactor and the amount of substrate leaching from the Feast to the Famine reactor.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho foi efectuado com o apoio da Universidade de Lisboa, Instituto Superior de Agronomia com o Centro de Engenharia dos Biossistemas (CEER

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thermal degradation upon melting is one of the major drawbacks reported for polyhydroxyalkanoates (PHA). However, the role of residues originating from the fermentation and the extraction steps on the thermal stability of this class of biopolymers still needs to be clarified. In the particular case of PHA produced from mixed microbial cultures (MMC), this topic is even less documented in the literature. Here, two polyhydroxy(butyrate-co-valerate) (PHBV) produced from MMC enriched in PHA accumulating organisms and fed with cheese whey were studied. A micro extrusion line is used to produce filaments and assess the processability and the degradation of processed PHBV. The prototype micro extrusion line allows for studying grams of materials. The two PHBV contain 18 mol% HV. PHBV was recovered with 11 wt% residues, and further submitted to a purification procedure resulting in a second biopolyester containing less than 2 wt% impurities. The thermorheological characterization of the two PHBV is first presented, together with their semicrystalline properties. Then the processing windows of the two biopolyesters are presented. Finally, the properties of extruded filaments are reported and the thermomechanical degradation of PHBV is extensively studied. The structure was assessed by wide angle X-ray diffraction, mechanical and rheological properties are reported, thermal properties are studied with differential scanning calorimetry and thermogravimetric analysis, whereas Fourier Transform Infrared spectroscopy was used to assess the impact of the extrusion on PHBV chemical structure. All results obtained with the two PHBV are compared to assess the effects of residues on both PHBV processability and degradation.