Decay resistance of thermally-modified Eucalyptus grandis wood at 140 degrees C, 160 degrees C, 180 degrees C, 200 degrees C and 220 degrees C

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Adsorção do corante amarelo reativo BF-4G 200% por argila esmectita

This study aimed to evaluate the potential use of smectite clays for color removal of textile effluents. The experiments were performed by testing exploratory/planning method factorial and fractional factorial where the factors and levels are predetermined. The smectite clays were used originating from gypsum hub of the region Araripe-PE, and the dye used was Reactive Yellow BF-4G 200%. The smectite clay was collected and transported to the Laboratory of Soil Physics of UFRPE, where it held its preparation through air drying, lump breaking and classification in sieve to then submit it to the adsorption process. Upon completion of 22 complete factorial design it was concluded that the values of (96, 96,5 and 95,8%) corresponding to the percentage of of removal for "in-kind", chemically and thermally activated, respectively and adsorbed amounts of (4,80, 4,61 and 4,74 mg/g) for three clays. Showed that the activation processes used did not increase the adsorption capacity of smectite clay. The kinetic data were best fitted to the Freundlich isotherm, with an exponential distribution of active sites and that shows above the Langmuir equation for adsorption of cations and anions by clays. The kinetic model that best adapted to the results was the pseudosecond order model. In the factorial design study 24-1, at concentrations up to 500 mg/L obtains high percentage of color removal (92,37, 90,92 and 93,40%) and adsorbed amount (230,94, 227,31 and 233,50 mg/g) for three clays. The kinetic data fitted well to Langmuir and Freundlich isotherms. The kinetic model that best adapted to the results was the pseudosecond order model

The generator coordinate Hartree-Fock method as strategy for building Gaussian basis sets to ab initio study of the process of adsorption of sulfur on platinum (200) surface

The scheme named generator coordinate Hartree-Fock method (GCHF) is used to build (22s14p) and (33s22p16d9f) gaussian basis sets to S ((3)P) and Pt ((3)D) atoms, respectively. Theses basis sets are contracted to [13s10p] and [19s13p9d5f] through of Dunning's segmented contraction scheme and are enriched with d and g polarization functions, [13s10p1d] and [19s13p9d5flg]. Finally, the [19s13p9d5f1g] basis Set to Pt ((3)D) was supplemented with s and d diffuse functions, [20s13p10d5flg], and used in combination with [13s10p1d] to study the effects of adsorption of S ((3)D) atom on a pt ((3)D) atom belonged to infinite Pt (200) surface. Atom-atom overlap population, bond order, and infrared spectrum of [pt(_)S](2 -) were calculated properties and were carried out at Hartree-Fock-Roothaan level. The results indicate that the process of adsorption of S ((3)P) on pt ((3)D) in the infinite Pt (200) surface is mainly caused by a strong contribution of sigma between the 3p(z) orbital of S ((3)P) and the 6s orbital of pt ((3)D). (c) 2004 Elsevier B.V. All rights reserved.

Blue upconversion enhancement by a factor of 200 in Tm 3+-doped tellurite glass by codoping with Nd 3+ ions

We investigated near-infrared-to-blue upconversion from thulium (Tm 3+) doped in tellurite glasses upon continuous wave excitation near 800 nm. We observed an enhancement of over two orders of magnitude of the upconverted emission at ∼480nm when neodymium (Nd 3+) ions were codoped with Tm 3+ ions. For comparison, using a Tm 3+:Nd 3+ codoped fluorozirconate glass as a reference material we observed a 40-fold enhancement of the blue emission. Analysis of the blue emission for samples with different doping levels of Nd 3+ ions showed that energy transfer between Nd 3+ and Tm 3+ is the mechanism responsible for the enhancement in upconversion. © 2002 American Institute of Physics. © 2002 American Institute of Physics.

Clonidina como medicação pré-anestésica em facectomias: Comparação entre as doses de 100 μg e 200 μg

BACKGROUND AND OBJECTIVES: The objective of the present study was to evaluate the degree of sedation, intraocular pressure, and hemodynamic changes with premedication with low doses of oral clonidine, 100 μg and 200 μg, in outpatient cataract surgeries. METHODS: This is a randomized, double-blind, clinical study undertaken at the Universidade Federal de São Paulo with 60 patients of both genders, physical status ASA 1 and 2, ages 18 to 80 years. Patients were separated into three groups: placebo, clonidine 100 μg, and clonidine 200 μg. Intraocular pressure, heart rate, and blood pressure besides assessment of sedation were measured before and 90 minutes after the administration of clonidine. Sedation levels were classified according to the Ramsay sedation scale. RESULTS: Patients who received placebo and 100 μg of clonidine did not show reduction in heart rate, while a reduction in heart rate was observed in patients who received 200 μg of clonidine, and this difference was statistically significant. Patients who received 200 μg of clonidine also had a reduction in systolic and diastolic blood pressure (p < 0.05). One patient who received 200 μg of clonidine developed severe hypotension, with systolic pressure < 80 mmHg. Patients treated with clonidine had a reduction in intraocular pressure (p < 0.05). Ninety minutes after the oral administration of placebo and 100 μg and 200 μg of clonidine, 25%, 60%, and 80% of the patients respectively were classified as Ramsay 3 or 4. CONCLUSIONS: Clonidine 100 μg can be indicated as premedication for fasciectomies, being effective in sedation and reduction of intraocular pressure, without adverse effects on blood pressure and heart rate.

Effects of constant rate infusion of anesthetic or analgesic drugs on general anesthesia with isoflurane: A retrospective study in 200 dogs

Constant rate infusion (CRI) shows several advantages in balanced anesthesia, such as reduction of requirement for inhaled anesthetics and control of pain. The most commonly used drugs in these protocols are local anesthetics, dissociative, and opioids, which may be administered alone or in combinations. We evaluated the records of 200 dogs that underwent various surgical procedures with anesthetic or analgesic CRI in the perioperative period during 2011 and 2012 at the Veterinary Hospital of Franca University (Unifran), and identified possible complications during the transoperative period. Records evaluated included clinical state, laboratory tests, drugs used in premedication and induction, and CRI protocol. Acepromazine and morphine were the main drugs used in premedication. Propofol was used to induce anesthesia alone or in combination with other agents. We evaluated records of the 25 different CRI protocols. Fentanyl was the main drug employed in CRI, either alone or in combination. There were 128 episodes of anesthetic complications during CRI;the most common were hypotension, hypertension, and tachycardia, which occurred in 43 (32%), 35 (26.3%), and 19 (14.2%) dogs, respectively. Cardiac arrhythmia was reported in only 4 dogs. Signs of respiratory depression were present in dogs treated with 6 different CRI protocols. The consumption of isoflurane (vol %) reduced between 15.7% and 21.05% after 30minutes of the CRI in the fentanyl and fentanyl-lidocaine-ketamine CRI groups (p<0.05). In conclusion, CRI is a valid component of balanced anesthesia in dogs, safe, and has a low incidence of adverse effects. However, future studies are warranted to describe the results of the clinical use of CRI to better characterize and refine this technique.

Perfil de expressão dos mIRNAS da família mIR-200 e mIR-192 no rim total e glomérulos isolados de ratos submetidos à restrição protéica in útero

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O Teatro da Memória: o Museu Histórico de Londrina : 1959-200

Pós-graduação em História - FCLAS

Tempo de trabalho e sindicalismo: uma análise da ação sindical na questão do tempo de trabalho (1980-200)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ligas inteligentes com efeito memória de forma aplicáveis em um grande intervalo de temperaturas e particularmente superior a 200 oC.

Ligas que compreendem quantidades de metais expressas como porcentagens em peso, incluídas dentro dos seguintes intervalos: 8-20% de Al; 1-20% de Ag; 0-2% (de preferência 0,5-1%) de um metal minoritário (de preferência Co); e o resto até 1005 de Cu. As suas transformações martensíticas têm lugar a temperaturas superiores e aproximadamente 200°C, e próximas aos 400°C em alguns casos, sendo habituais as próximas aos 300°C. Possuem maior resistência à corrosão que as ligas convencionais. São úteis em novos campos de aplicação industrial como, por exemplo, no controle de temperatura em óleos de alto ponto de ebulição e em situações de grande desprendimento de calor por reações exotérmicas ou por grande roçamento.