A novel real time pricing scheme for demand response in residential distribution systems

Price based technique is one way to handle increase in peak demand and deal with voltage violations in residential distribution systems. This paper proposes an improved real time pricing scheme for residential customers with demand response option. Smart meters and in-home display units are used to broadcast the price and appropriate load adjustment signals. Customers are given an opportunity to respond to the signals and adjust the loads. This scheme helps distribution companies to deal with overloading problems and voltage issues in a more efficient way. Also, variations in wholesale electricity prices are passed on to electricity customers to take collective measure to reduce network peak demand. It is ensured that both customers and utility are benefitted by this scheme.

A survey of control allocation methods for underwater vehicles

A control allocation system implements a function that maps the desired control forces generated by the vehicle motion controller into the commands of the different actuators. In this article, a survey of control allocation methods for over-actuated underwater vehicles is presented. The methods are applicable for both surface vessels and underwater vehicles. The paper presents a survey of control allocation methods with focus on mathematical representation and solvability of thruster allocation problems. The paper is useful for university students and engineers who want to get an overview of state-of-the art control allocation methods as well as advance methods to solve more complex problems.

Challenges for implementation of a new model of collaborative design management: Analyzing the impact of human factor

The ineffectiveness of current design processes has been well studied and has resulted in widespread calls for the evolution and development of new management processes. Even following the advent of BIM, we continue to move from one stage to another without necessarily having resolved all the issues. CAD design technology, if well handled, could have significantly raised the level of quality and efficiency of current processes, but in practice this was not fully realized. Therefore, technology alone can´t solve all the problems and the advent of BIM could result in a similar bottleneck. For a precise definition of the problem to be solved we should start by understanding what are the main current bottlenecks that have yet to be overcome by either new technologies or management processes, and the impact of human behaviour-related issues which impact the adoption and utilization of new technologies. The fragmented and dispersed nature of the AEC sector, and the huge number of small organizations that comprise it, are a major limiting factor. Several authors have addressed this issue and more recently IDDS has been defined as the highest level of achievement. However, what is written on IDDS shows an extremely ideal situation on a state to be achieved; it shows a holistic utopian proposition with the intent to create the research agenda to move towards that state. Key to IDDS is the framing of a new management model which should address the problems associated with key aspects: technology, processes, policies and people. One of the primary areas to be further studied is the process of collaborative work and understanding, together with the development of proposals to overcome the many cultural barriers that currently exist and impede the advance of new management methods. The purpose of this paper is to define and delimit problems to be solved so that it is possible to implement a new management model for a collaborative design process.

Best of breed IT strategy: an alternative to enterprise resource planning systems

Abstract - Enterprise Resource Planning (ERP) software has become the dominant strategic platform for supporting enterprise-wide business processes. However, single vendor ERP software systems have been criticised for not meeting specific organisation and industry requirements. An alternative approach ‘Best of Breed (BoB)’, integrates components of software from multiple standard package vendors, and in some cases custom components. The objective is to develop enterprise systems that are more closely aligned with the requirements of an organisation. Although this approach may not be common at present it is likely to grow in importance due to business needs and technology advances such as the componentisation of ERP software. A case study analysis of a BoB implementation at a global entertainment's company is used as a platform for the discussion of the issues associated with this strategy and a comparison is made with the single vendor ERP alternative. The analysis centres on the complexity of implementation, the differences in the levels of functionality and business fit and the maintenance requirements.

Aggregating energy supply and demand

Energy usage in general, and electricity usage in particular, are major concerns internationally due to the increased cost of providing energy supplies and the environmental impacts of electricity generation using carbon-based fuels. If a "systems" approach is taken to understanding energy issues then both supply and demand need to be considered holistically. This paper examines two research projects in the energy area with IT tools as key deliverables, one examining supply issues and the other studying demand side issues. The supply side project used hard engineering methods to build the models and software, while the demand side project used a social science approach. While the projects are distinct, there was an overlap in personnel. Comparing the knowledge extraction, model building, implementation and interface issues of these two deliverables identifies both interesting contrasts and commonalities.

Instance-driven TBox revision in DL-Lite

The development and maintenance of large and complex ontologies are often time-consuming and error-prone. Thus, automated ontology learning and revision have attracted intensive research interest. In data-centric applications where ontologies are designed or automatically learnt from the data, when new data instances are added that contradict to the ontology, it is often desirable to incrementally revise the ontology according to the added data. This problem can be intuitively formulated as the problem of revising a TBox by an ABox. In this paper we introduce a model-theoretic approach to such an ontology revision problem by using a novel alternative semantic characterisation of DL-Lite ontologies. We show some desired properties for our ontology revision. We have also developed an algorithm for reasoning with the ontology revision without computing the revision result. The algorithm is efficient as its computational complexity is in coNP in the worst case and in PTIME when the size of the new data is bounded.

Reactive reaching and grasping on a humanoid: Towards closing the action-perception loop on the iCub

We propose a system incorporating a tight integration between computer vision and robot control modules on a complex, high-DOF humanoid robot. Its functionality is showcased by having our iCub humanoid robot pick-up objects from a table in front of it. An important feature is that the system can avoid obstacles - other objects detected in the visual stream - while reaching for the intended target object. Our integration also allows for non-static environments, i.e. the reaching is adapted on-the-fly from the visual feedback received, e.g. when an obstacle is moved into the trajectory. Furthermore we show that this system can be used both in autonomous and tele-operation scenarios.

Tissue-engineered fibroin scaffolds for ocular tissue reconstruction

The silk protein fibroin (Bombyx mori) provides a potential substrate for use in ocular tissue reconstruction. We have previously demonstrated that transparent membranes produced from fibroin support cultivation of human limbal epithelial (HLE) cells (Tissue Eng A. 14(2008)1203-11). We extend this body of work to studies of limbal mesenchymal stromal cell (L-MSC) growth on fibroin. Also, we investigate the ability to produce a fibroin dual-layer scaffold with an upper HLE layer and lower L-MSC layer...

Effect of nitrification inhibitors (DMPP and 3MP+ TZ) on soil nitrous oxide emissions from a sub-tropical vegetable production system in Queensland, Australia

The use of nitrification inhibitors, in combination with ammonium based fertilisers, has been promoted recently as an effective method to reduce nitrous oxide (N2O) emissions from fertilised agricultural fields, whilst increasing yield and nitrogen use efficiency. Vegetable cropping systems are often characterised by high inputs of nitrogen fertiliser and consequently elevated emissions of nitrous oxide (N2O) can be expected. However, to date only limited data is available on the use of nitrification inhibitors in sub-tropical vegetable systems. A field experiment investigated the effect of the nitrification inhibitors (DMPP & 3MP+TZ) on N2O emissions and yield from a typical vegetable production system in sub-tropical Australia. Soil N2O fluxes were monitored continuously over an entire year with a fully automated system. Measurements were taken from three subplots for each treatment within a randomized complete blocks design. There was a significant inhibition effect of DMPP and 3MP+TZ on N2O emissions and soil mineral N content directly following the application of the fertiliser over the vegetable cropping phase. However this mitigation was offset by elevated N2O emissions from the inhibitor treatments over the post-harvest fallow period. Cumulative annual N2O emissions amounted to 1.22 kg-N/ha, 1.16 kg-N/ha, 1.50 kg-N/ha and 0.86 kg-N/ha in the conventional fertiliser (CONV), the DMPP treatment, the 3MP+TZ treatment and the zero fertiliser (0N) respectively. Corresponding fertiliser induced emission factors (EFs) were low with only 0.09 - 0.20% of the total applied fertiliser lost as N2O. There was no significant effect of the nitrification inhibitors on yield compared to the CONV treatment for the three vegetable crops (green beans, broccoli, lettuce) grown over the experimental period. This study highlights that N2O emissions from such vegetable cropping system are primarily controlled by post-harvest emissions following the incorporation of vegetable crop residues into the soil. It also shows that the use of nitrification inhibitors can lead to elevated N2O emissions by storing N in the soil profile that is available to soil microbes during the decomposition of the vegetable residues over the post-harvest phase. Hence the use of nitrification inhibitors in vegetable systems has to be treated carefully and fertiliser rates need to be adjusted to avoid excess soil nitrogen during the postharvest phase.

Audience members (including Max Rieser?); Second International Congress of the International Union for the Philosophy of Science; Zurich Portraits Groups Men

Digital Image

AHC interview with Gloria Gray Katz.

June 7, 2010

Nuts and bolts, assembling a life.

Memoir, written in 1997

Memoirs of an immigrant and his ashtray

The memoirs were written in 1999. Childhood memories in a small town in Lower Austria. Passion for playing football (soccer). Recollections of daily life with rituals of coffeehouse visits and family dinners in the countryside. First experiences of antisemitism in the mid 1930s. Rising Nazi movement and illegal meetings in the local community. Annexation of Austria in 1938. First encounters with anti-Jewish regulations and discrimination by neighbors and acquaintances. Walter experienced severe difficulties at school and was frequently insulted and beaten up. Decision to leave school. The family was forced to leave Eggenburg soon thereafter, and the town declared itself "Judenfrei" (free of Jews). Move to Vienna, where they stayed with relatives. Walter, who had been brought up as a Catholic, suddenly saw himself confronted with orthodox Jewish people of different customs. Increasing restrictions for Jews. Walter was enrolled in a program at the Vienna Jewish community to learn carpentry. Recollections of the terror of Kristallnacht. Walter and his brother Ludwig were signed up for a children transport to England by the Quaker organization and left Vienna in December 1938. Difficult feeling to depart from their parents. Arrival in Harwige. They were taken to a camp in Lowestoft. Cultural differences. Walter and his brother were sent to a training farm in Parbold. Simple living conditions and difficult circumstances. Farm work and school lessons. Outbreak of the war. Scarce news of their parents, who tried to leave for Argentina. Walter's older brother Ludwig was sent to an internment camp in Adelaide, Australia. After two years he volunteered in the Pioneer Corps and returned to England. In 1941 their parents finally managed to emigrate to Argentina. Walter decided to join them, and in 1943 he left for Buenos Aires. During the passage on the Atlantic the ship was sunk by a German submarine. Rescue by the US Army. Continuation of his trip via New York.

Under Swastika and the French flag.

The memoirs were originally written for the Harvard University competition in 1940 and were translated by the author in 2001. Reflections on his childhood in Germany and Austria. His parents were both from Poland. They moved to Vienna in 1921, where his father opened a haberdashery store in the Second district (Leopoldstadt). Otto attended primary school in Czerningasse. Birth of his sister Cecile in 1924. After his failing business endeavors his father decided to move back to Germany, where the family opened a department store in Elbing, East Prussia. Otto attended Gymnasium, where he was one of only two Jewish students in his class. Growing Nazi movement among students. Summer vacations on the Baltic Sea. Private piano lessons. Hitler’s rise in Germany and life under National Socialism. Bar mitzvah in 1933. Anti-Jewish boycotts. His father fled to Vienna in order to escape a rounding up of Jews. The family followed soon after to Austria. Otto attended Gymnasium in the Zirkusgasse and started to work as a tutor. Member of a youth group and hiking tours in the mountains. Recollections of the Anschluss in 1938. Fervent attempts to obtain an exit visa for the United States, where they had a relative in New York. Description of discriminations and frequent attacks on Jewish friends and relatives in the weeks after the Anschluss. Otto was picked up by Nazi stormtroops. He was forced to hold up an anti-Jewish sign and was walked up and down, receiving beatings and spittings in front of a jeering crowd. Detailed account of the atmosphere within the Jewish population. The Gymnasium Zirkusgasse was transferred into a Jewish school. Frequent attacks of Hitler Youths on the students. Preparations for the “Matura” despite the turmoil. In June of 1938 his father was arrested and sent to Dachau concentration camp. After passing the final exams, Otto planned on leaving the country illegally, since he was subject to the Polish quota for the United States with

Dachau concentration camp - a memoir May to December of 1938

This memoir provides a detailed description of daily life and misery in the concentration camp Dachau. The first eight chapters are missing which would cover Felix Klinen's life in Vienna. The existing memoir then starts with his deportation to Dachau, and ends shortly before his transfer to Buchenwald concentration camp, covering the time from May to December of 1938. Translated from the German by Sanda Vero