一种小G蛋白TaRAN1在植物细胞周期和发育过程中的功能研究

　　小G蛋白作为信号转导中重要的分子开关， 进化相当保守，与许多不同的调控因子和效应器分子相互作用，产生细胞功能的多样性。近年来，人们不断发现植物中小G蛋白家族的新成员，也不断揭示小G蛋白的新功能，许多植物特有的信号途径和功能需要小G蛋白这个重要的分子开关来完成，使它越来越成为人们研究的热点问题。但是，有关植物中Ran GTPase及其编码基因的研究工作报道很少，对与之相互作用的调控蛋白研究进展也刚刚开始。 　　TaRAN1 (AF488730) 是小麦来源的Ran同源蛋白编码基因，全长1055 bp, 编码221个氨基酸，它在植物发育过程中的功能还没有任何报道。本论文在验证了它是小G蛋白Ran家族的成员后，从分子水平上还发现它在植物细胞周期调控、对生长素以及胁迫应答信号转导过程中都起着重要作用，这也说明了它可能作为信号转导过程中重要的转换因子，参与了很多细胞的基本生理过程。 　　利用原核表达系统及亲和色谱的方法纯化了TaRAN1融合蛋白，并用放射性标记的GTP和竞争实验证实了它具有特异的GTP结合活性。TaRAN1的转录产物在小麦幼茎和花芽等分生组织活动旺盛的器官表达较多，而在老叶中表达较少。利用洋葱表皮瞬时表达系统分析表现，TaRAN1蛋白主要定位于细胞核，但其没有典型的核定位信号。 　　细胞周期一直是生物学领域中的热门问题，人们虽然在动物细胞中取得了很大进展，但在植物细胞中的研究远落后于动物。裂殖酵母（Schizosaccharomyces pombe）是研究细胞形态和细胞周期的良好系统，利用此系统发现超表达TaRAN1的酵母细胞表现出许多新的细胞学表型，例如G2细胞周期延滞、染色体对紫外线敏感、细胞超长或多隔细胞的出现等;反义表达TaRAN1的酵母细胞呈近圆型、具有高度凝集的核并且生长速度缓慢、核质混合和无核细胞的数目明显增加。流式细胞仪检测实验也证实其细胞周期的异常。这些结果推测TaRAN1蛋白可能参与细胞周期的有丝分裂过程和发育的调控机制，并且在维持染色体结构稳定和完整性方面起着重要的作用。通过免疫荧光实验观察表明，超表达转基因酵母的微管多呈异常的狭小扇形结构，反义表达TaRAN1的酵母微管不能形成丝状结构，推测TaRAN1还可能参与微管（包括纺锤体）的结构形成过程。最后，我们用超表达TaRAN1的转基因拟南芥和水稻也证实了它的功能，其生长点表现出分生组织增多的原基、根生长点的有丝分裂指数有所改变、出现异常的细胞分裂时相等有关细胞周期异常的现象，更进一步说明了TaRAN1确实参与着细胞周期的调控过程，推测其与细胞周期从G2期进入M期的过程有关。 　　TaRAN1基因受IAA的诱导表达，且随着浓度的增加表达量增强。超表达的TaRAN1植株（包括拟南芥和水稻）的根表现出对外源生长素异常敏感，侧根显著变少，地上部分表现出生长素过量的表现型，顶端优势减弱，分蘖增多，生长周期延长等。HPLC测定转基因植物的IAA含量，明显高于对照。所以，TaRAN1可能还参与了复杂的生长素信号转导过程。TaRAN1基因还受各种胁迫处理的诱导表达，并且超表达植株对胁迫的忍受能力有明显提高，这说明TaRAN1还参与了胁迫信号应答的相应机制。Ran蛋白这些新功能目前还未见到其它报道。

温带灌木生态系统的动态特征--生物量和元素循环

本文通过对北京郊区的一个经皆伐以后，自然发育二十多年的次生灌木生态系统的定量研究，结果如下： 1）该生态系统年中最高生物量可达20.30 t/ha，但没有明显的年净增加，从而推出该系统可能进入一种比较稳定的平衡状态，生物量最高出现于秋季（生长季末）;最低为春季（生长季始），这主要是由于从秋季到春季经历了凋落和休眠的过程。另外，灌木的地下部分生物量与地上之比接近1，这也是对灌木生长发育特征的反映。 2）植物各个部位--侧根，主根，主枝，侧枝，叶---有不同的烧失量，但三种植物几乎有相似的顺序，即：主枝>侧枝><主根>侧根>叶（荆条的叶与侧根有相反的顺序）。烧失量反映了有机物质在植物各个部位的含量。 3）十种元素（N，K，Ca，Mg，Na，Cu，Zn，Fe，Al，Mn）在同一种植物，同种元素在不同植物，植物的不同部位，都有不同的含量，并且随着季节的变化而变化。 4）降水中所含的元素是生态系统营养的重要来源，尤其是一些大量元素如K, Na, Ca, Mg等。一般地冠流中的元素含量要高于降水中的，冠流中元素浓度与降水中的比值，不同的元素是不相同的，其中K为2-7倍，Na为1-3倍，Ca, Mg为1-2倍，对同一元素，比值的大小降水的时间有一定的关系，也即有时间性的变化。 5）土壤的水分含量不仅由于雨季和旱季而发生变化，还随土壤的不同的而异，而这种变化又随着季节性而不同。 6）营养元素输入--输出预算表明，各个元素基本上没有明显的存留，甚至有微量的亏损，但仍可以判断，该生态系统基本上处于一种较稳定的平衡状态。

红花五味子甲素的分离纯化及其抗HIV-1活性的研究

目的:从红花五味子果实中寻找活性代谢产物,研究其抗HIV-1活性和作用机制.方法:通过合胞体抑制、HIV-1感染细胞保护、HIV-1 p24抗原测定、融合阻断、逆转录酶和蛋白酶活性分析等实验,检测分离化合物的抗HIV-1活性并探讨其作用机制.结果:红花五味子甲素能够抑制病毒诱导的合胞体形成,保护病毒感染细胞,抑制病毒在细胞内的复制.对HIV-1感染细胞与正常CD+4细胞间的融合,逆转录酶活性有一定的抑制作用.但是红花五味子甲素不抑制病毒在慢性感染细胞中的复制,也不抑制蛋白酶的活性.结论:首次从天然产物中分离得到红花五味子甲素,它对HIV-1病毒复制早期具有抑制作用.

Fluid-structure interaction with mean flow: Over-scattering and unstable resonance growth

It is known theoretically [1-3] that infinitely long fluid loaded plates in mean flow exhibit a range of unusual phenomena in the 'long time' limit. These include convective instability, absolute instability and negative energy waves which are destabilized by dissipation. However, structures are necessarily of finite length and may have discontinuities. Moreover, linear instability waves can only grow over a limited number of cycles before non-linear effects become dominant. We have undertaken an analytical and computational study to investigate the response of finite, discontinuous plates to ascertain if these unusual effects might be realized in practice. Analytically, we take a "wave scattering" [2,4] - as opposed to a "modal superposition" [5] - view of the fluttering plate problem. First, we solve for the scattering coefficients of localized plate discontinuities and identify a range of parameter space, well outside the convective instability regime, where over-scattering or amplified reflection/transmission occurs. These are scattering processes that draw energy from the mean flow into the plate. Next, we use the Wiener-Hopf technique to solve for the scattering coefficients from the leading and trailing edges of a baffled plate. Finally, we construct the response of a finite, baffled plate by a superposition of infinite plate propagating waves continuously scattering off the plate ends and solve for the unstable resonance frequencies and temporal growth rates for long plates. We present a comparison between our computational results and the infinite plate theory. In particular, the resonance response of a moderately sized plate is shown to be in excellent agreement with our long plate analytical predictions. Copyright © 2010 by ASME.

On the percussion drilling of SI using a 20W MOPA based YB fiber laser

A study on the nanosecond fiber laser interaction with silicon was performed experimentally for the generation of percussion drilled holes. Single pulse ablation experiments were carried out on mono crystalline 650μm thick Si wafers. Changes of the mass removal mechanism were investigated by varying laser fluence up to 68 J/cm2 and pulse duration from 50 ns to 200 ns. Hole width and depth were measured and surface morphology were studied using scanning electron microscopy (SEM) and optical interferometric profilometry (Veeco NT3300). High speed photography was also used to examine laser generated plasma expansion rates. The material removal rate was found to be influenced by the pulse energy, full pulse duration and pulse peak power. Single pulse ablation depth of 4.42 μm was achieved using a 200 ns pulse of 13.3 J/cm 2, giving a maximum machining efficiency of 31.86 μm per mJ. Holes drilled with an increased fluence but fixed pulse length were deeper, exhibited low recast, but were less efficient than those produced at a lower fluence. The increased peak power in this case led to high levels of plasma and vapour production. The expansion of which, results in a strong driving recoil force, an increase in the rate and volume of melt ejection, and cleaner hole formation. The experimental findings show that for efficient drilling at a given energy, a longer, lower peak power pulse is more desirable than a high peak power short pulse.

Detection of large-scale concrete columns for automated bridge inspection

There are over 600,000 bridges in the US, and not all of them can be inspected and maintained within the specified time frame. This is because manually inspecting bridges is a time-consuming and costly task, and some state Departments of Transportation (DOT) cannot afford the essential costs and manpower. In this paper, a novel method that can detect large-scale bridge concrete columns is proposed for the purpose of eventually creating an automated bridge condition assessment system. The method employs image stitching techniques (feature detection and matching, image affine transformation and blending) to combine images containing different segments of one column into a single image. Following that, bridge columns are detected by locating their boundaries and classifying the material within each boundary in the stitched image. Preliminary test results of 114 concrete bridge columns stitched from 373 close-up, partial images of the columns indicate that the method can correctly detect 89.7% of these elements, and thus, the viability of the application of this research.

Unified modelling in support of organization design and change

The aim of this research is to provide a unified modelling-based method to help with the evaluation of organization design and change decisions. Relevant literature regarding model-driven organization design and change is described. This helps identify the requirements for a new modelling methodology. Such a methodology is developed and described. The three phases of the developed method include the following. First, the use of CIMOSA-based multi-perspective enterprise modelling to understand and capture the most enduring characteristics of process-oriented organizations and externalize various types of requirement knowledge about any target organization. Second, the use of causal loop diagrams to identify dynamic causal impacts and effects related to the issues and constraints on the organization under study. Third, the use of simulation modelling to quantify the effects of each issue in terms of organizational performance. The design and case study application of a unified modelling method based on CIMOSA (computer integrated manufacturing open systems architecture) enterprise modelling, causal loop diagrams, and simulation modelling, is explored to illustrate its potential to support systematic organization design and change. Further application of the proposed methodology in various company and industry sectors, especially in manufacturing sectors, would be helpful to illustrate complementary uses and relative benefits and drawbacks of the methodology in different types of organization. The proposed unified modelling-based method provides a systematic way of enabling key aspects of organization design and change. The case company, its relevant data, and developed models help to explore and validate the proposed method. The application of CIMOSA-based unified modelling method and integrated application of these three modelling techniques within a single solution space constitutes an advance on previous best practice. Also, the purpose and application domain of the proposed method offers an addition to knowledge. © IMechE 2009.

Riemannian metric and geometric mean for positive semidefinite matrices of fixed rank

This paper introduces a new metric and mean on the set of positive semidefinite matrices of fixed-rank. The proposed metric is derived from a well-chosen Riemannian quotient geometry that generalizes the reductive geometry of the positive cone and the associated natural metric. The resulting Riemannian space has strong geometrical properties: it is geodesically complete, and the metric is invariant with respect to all transformations that preserve angles (orthogonal transformations, scalings, and pseudoinversion). A meaningful approximation of the associated Riemannian distance is proposed, that can be efficiently numerically computed via a simple algorithm based on SVD. The induced mean preserves the rank, possesses the most desirable characteristics of a geometric mean, and is easy to compute. © 2009 Society for Industrial and Applied Mathematics.

天然雌核发育银鲫与两性生殖彩鲫卵母细胞中蛋白激酶基因表达差异的比较

采用mRNA差异显示方法 ,以蛋白激酶基因家族保守区设计 5′引物 ,比较天然雌核发育银鲫和两性生殖彩鲫卵母细胞中蛋白激酶基因的表达 .结果表明 ,以引物T12 MA ,T12 MC和T12 MG合成的cDNA第 1链分别再经蛋白激酶特异引物扩增所得到的PCR条带数目和分布模式各不相同 .从胶上总共回收并克隆了 2 1个cDNA片段 ,对其中 3个做了Northern杂交验证 ,有 2个在彩鲫卵母细胞中特异表达 ,另 1个在银鲫中特异表达 .

Transport-determined early growth and development of jack mackerel Trachurus japonicus juveniles immigrating into Sagami Bay, Japan

Oceanographic conditions and transport processes are often critical factors that affect the early growth, survival and recruitment of marine fishes. Sagittal otoliths were analysed to determine age and early growth for 381 jack mackerel (Trachurus japonicus) juveniles from Sagami Bay on the Pacific coast of Japan. Two separate hatching periods ( December and February-March) were identified. They originated from the spawning grounds in the East China Sea. Early growth and developmental rates of December-hatching fish were lower than those for February-March-hatching fish. It is likely that these differences were determined in the Kuroshio Current during transport from the spawning grounds to Sagami Bay, and the lower December water temperatures in the bay. Origin and hatch dates of juveniles in Sagami Bay were in contrast to previous research on Fukawa Bay, where April-or-later-hatching fish from spawning grounds in the coastal waters of southern Japan constituted about half of the juvenile population. Management of these two jack mackerel stocks needs to consider these differences in hatch date composition and spawning origins, as these differences could affect early growth and subsequent mortality.

The research of phosphorus of Xiangxi River nearby the Three Gorges, China

The Xiangxi River is the first middling tributary of the Changjiang River near the Three Gorges Dam. The River is subject to phosphorus pollution mainly from industrial wastewater. As the water quality of the Xiangxi River could directly influence the water quality of the Three Gorges Reservoir, the research on phosphorus levels and its change in the sediment profile of the Xiangxi River could provide useful information in the dynamic changes in the system, thereby offering options for mitigative measures. Water and sediment samples from lower reaches of Xiangxi River were collected and the different forms of phosphorus in sediments of the Xiangxi River were studied. The concentrations of total phosphorus in sediment ranged from 757.67 to 1438.54 mg/kg. Inorganic phosphorus concentrations ranged from 684.63 to 1055.58 mg/kg. Phosphorus contamination was serious in some parts of the Xiangxi River. With an average concentration of 635.17 mg/kg, calcium-bound phosphorus is the main form among different inorganic phosphorus forms. Labile phosphorus and iron/aluminum-bound phosphorus measured 3.40, 0.05and 35.28 mg/kg, respectively. The mobilization potential of phosphorus of sediments was studied through adsorption and release experiments. The equilibrium concentration of phosphorus adsorption and release was around 0.1 mg/L. The initial concentrations of phosphorus in the overlying water and the sediments have obvious effect on phosphorus mobilization potential. In addition, the release rate of phosphorus in sediment increased with water depth.

基于安全策略模型的安全功能测试用例生成方法

实施第三方安全功能独立测试是信息安全产品测评中的一个重要环节,对于以安全数据库管理系统为代表的信息安全产品,其系统规约的测试并不能完全真实反映系统行为,还需要满足系统安全策略.提出了基于安全策略模型的安全功能测试用例自动生成方法,该方法包括基于语法的划分、基于规则的划分、基于类型的划分等步骤,依据形式化安全模型生成正确描述系统行为的操作测试用例集.该方法有助于提高测试质量,发现手工测试中难以发现的缺陷,并有助于减少测试过程中的重复劳动,实现测试自动化并提高测试效率.

基于RSA签名的优化公平交换协议

公平性是电子商务协议的基本安全要求.RSA是应用最为广泛的公钥密码体制之一.公平交换协议可以使得参与交换的双方以公平的方式交换信息,这样,要么任何一方都可以得到对方的信息,要么双方都得不到对方的信息.分析了现有的公平交换协议构造方法、体系结构及其在实用性和效率方面存在的问题.在此基础上,利用精心构造的扩环中可公开验证的、加密的RSA签名,提出了一种完全基于RSA签名方案的优化公平交换协议,并对其安全性和效率进行了证明和分析.分析表明,提出的方案是简洁、高效、安全的。