The phenanthroimidazole-based dizinc(II) complex as a fluorescent probe for the pyrophosphate ion as generated in polymerase chain reactions and pyrosequencing

A highly selective and sensitive phenanthroimidazole tagged Mannich base type dizinc(II) fluorescent probe (R-Zn2+) has been developed for the pyrophosphate ion (PPi) with a very low limit of detection (LOD) of 0.25 ppm; this also assesses PPi from DNA polymerization chain reaction (PCR).

Nanomaterials coated multiplexed fiber Bragg grating for multiparameter sensing

Fiber Bragg Grating (FBG) sensors have been extensively used for strain and temperature sensing. However, there is still a need to measure multiple environmental parameters with a single sensor system. We demonstrate a multiplexed FBG sensor with various nano materials (polyallylamine-amino-carbon-nanotube, carbon nanotubes, polyelectrolyte and metals) coated onto the surface of the core/cladding FBG for sensing multiple environmental parameters such as pH (64 pm/pH), protein concentration (5 pm/mu g/ml), temperature (15 pm/degrees C), humidity (31 pm/% RH), gas concentration (7 pm/1000 ppm), and light intensity (infrared: 33 pm/mW, visible: 12 pm/mW and UV: 1 pm/mW) utilizing the same FBG based platform.

Water-responsive carbon nanotubes for selective detection of toxic gases

Ammonia plays an important role in our daily lives and hence its quantitative and qualitative sensing has become necessary. Bulk structure of carbon nanotubes (CNTs) has been employed to detect the gas concentration of 10 ppm. Hydrophobic CNTs were turned to hydrophilic via the application of a ramp electric field that allowed confinement of a controlled amount of water inside CNT microstructure. These samples were then also used to detect different gases. A comparative study has been performed for sensing three reducing gases, namely, ammonia, sulphur-di-oxide, and hydrogen sulphide to elaborate the selectivity of the sensor. A considerable structural bending in the bulk CNT was observed on evaporation of the confined water, which can be accounted to the zipping of individual nanotubes. However, the rate of the stress induced on these bulk microstructures increased on the exposure of ammonia due to the change in the surface tension of the confined solvent. A prototype of an alarm system has been developed to illustrate sensing concept, wherein the generated stress in the bulk CNT induces a reversible loss in electrical contact that changes the equivalent resistance of the electrical circuit upon exposure to the gas. (C) 2015 AIP Publishing LLC.

SWEETENING OF BIOGAS IN SPRAY TOWERS FOR POWER GENERATION

This paper presents the experience of the new design of using impinging jet spray columns for scrubbing hydrogen sulfide from biogas that has been developed by Indian Institute of Science and patented. The process uses a chelated polyvalent metal ion which oxidizes the hydrogen sulfide to sulfur as a precipitate. The sulfur generated is filtered and the scrubbing liquid recycled after oxidation. The process involves in bringing contact the sour gas with chelated liquid in the spray columns where H2S reacts with chelated Fe3+ and precipitates as sulfur, whereas Fe3+ gets reduced to Fe2+. Fe2+ is regenerated to Fe3+ by reaction of oxygen in air in a separate packed column. The regenerated liquid is recirculated. Sulfur is filtered and separated as a byproduct. The paper presents the experience in using the spray towers for hydrogen sulfide removal and further use of the clean gas for generating power using gas engines. The maximum allowable limit of H2S for the gas engine is 200 ppm (v/v) in order to prevent any corrosion of engine parts and fouling of the lubricating oil. With the current ISET process, the hydrogen sulfide from the biogas is cleaned to less than 100 ppm (v/v) and the sweet gas is used for power generation. The system is designed for 550 NM3/hr of biogas and inlet H2S concentration of 2.5 %. The inlet concentration of the H2S is about 1 - 1.5 % and average measured outlet concentration is about 30 ppm, with an average gas flow of about 300 - 350 NM3/hr, which is the current gas production rate. The sweet gas is used for power generation in a 1.2 MWe V 12 engine. The average power generation is about 650 - 750 kWe, which is the captive load of the industry. The plant is a CHP (combined heat power) unit with heat from the cylinder cooling and flue being recovered for hot water and steam generation respectively. The specific fuel consumption is 2.29 kWh/m(3) of gas. The system has been in operation for more than 13,000 hours in last one year in the industry. About 8.4 million units of electricity has been generated scrubbing about 2.1 million m3 of gas. Performance of the scrubber and the engine is discussed at daily performance level and also the overall performance with an environment sustenance by precipitating over 27 tons of sulfur.

Spectrophotometric determination of molybdenum with Syzygium jambolanum DC leaf extracts

A new spectrophotometric method for the determination of molybdenum in industrial materials has been developed using the leaf extract of Syzygium jambolanum DC based on the reaction of Mo (VI) at pH 7.0 to produce an orange-yellow complex with an absorption maximum at 426 nm. The molar absorptivity of the complex is 4.27 x 10(4) l mol(-1) cm(-1) and the absorbance, is linear in the range 0.05-0.8 ppm. Sandell sensitivity coefficient was found to be 2.25 x 10(-3) mu g/cm(2). The method is ten times more sensitive than the aqueous thiocyanate system. It has been applied successfully in micronutrient fertilizer, artificial freshwater and sea-water analyses.

Coupling geomorphology parameters with lithology for micro-level groundwater resource assessment: a case study from semi-arid hard rock terrain in Tamil Nadu, India

The standard procedure of groundwater resource estimation in India till date is based on the specific yield parameters of each rock type (lithology) derived through pumping test analysis. Using the change in groundwater level, specific yield, and area of influence, groundwater storage change could be estimated. However, terrain conditions in the form of geomorphological variations have an important bearing on the net groundwater recharge. In this study, an attempt was made to use both lithology and geomorphology as input variables to estimate the recharge from different sources in each lithology unit influenced by the geomorphic conditions (lith-geom), season wise separately. The study provided a methodological approach for an evaluation of groundwater in a semi-arid hard rock terrain in Tirunelveli, Tamil Nadu, India. While characterizing the gneissic rock, it was found that the geomorphologic variations in the gneissic rock due to weathering and deposition behaved differently with respect to aquifer recharge. The three different geomorphic units identified in gneissic rock (pediplain shallow weathered (PPS), pediplain moderate weathered (PPM), and buried pediplain moderate (BPM)) showed a significant variation in recharge conditions among themselves. It was found from the study that Peninsular gneiss gives a net recharge value of 0.13 m/year/unit area when considered as a single unit w.r.t. lithology, whereas the same area considered with lith-geom classes gives recharge values between 0.1 and 0.41 m/year presenting a different assessment. It is also found from this study that the stage of development (SOD) for each lith-geom unit in Peninsular gneiss varies from 168 to 230 %, whereas the SOD is 223 % for the lithology as a single unit.

Ag-doped hydroxyapatite as efficient adsorbent for removal of Congo red dye from aqueous solution: Synthesis, kinetic and equilibrium adsorption isotherm analysis

In the present study a versatile and efficient adsorbent with high adsorption capacity for adsorption of Congo red dye in aqueous solution at ambient temperature without adjusting any pH is presented over the Ag modified calcium hydroxyapatite (CaHAp). CaHAp and Ag-doped CaHAp materials were synthesized using facile aqueous precipitation method. The physico-chemical properties of the materials were determined by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Transmission electron microscopy (TEM), UV-Visible spectroscopy, N-2 physisorption and acidity was determined by n-butylamine titration and pyridine adsorption methods. XRD analysis confirmed all adsorbents exhibit hexagonal CaHAp structure with P6(3)/m space group. TEM analysis confirms the rod like morphology of the adsorbents and the average length of the rods were in the range of 40-45 nm. Pyridine adsorption results indicate increase in number of Lewis acid sites with Ag doping in CaHAp. Adsorption capacity of CaHAp was found increased with Ag content in the adsorbents. Ag (10): CaHAp adsorbent showed superior adsorption performance among all the adsorbents for various concentrations of Congo red (CR) dye in aqueous solutions. The amount of CR dye adsorbed on Ag (10): CaHAp was found to be 49.89-267.81 mg g(-1) for 50-300 ppm in aqueous solution. A good correlation between adsorption capacity and acidity of the adsorbents was observed. The adsorption kinetic data of adsorbents fitted well with pseudo second-order kinetic model with correlation coefficients ranged from 0.998 to 0.999. The equilibrium adsorption data was found to best fit to the Langmuir adsorption isotherm model. (C) 2015 Elsevier Inc. All rights reserved.

Ultra sensitive NO2 gas detection using the reduced graphene oxide coated etched fiber Bragg gratings

We report a simple and highly sensitive methodology for the room temperature NO2 gas sensing using reduced graphene oxide (RGO) coated clad etched fiber Bragg grating (eFBG). A significant shift (>10 pm) is observed in the reflected Bragg wavelength (lambda(B)) upon exposing RGO coated on the surface of eFBG to the NO2 gas molecules of concentration 0.5 ppm. The shift in Bragg wavelength is due to the change in the refractive index of RGO by charge transfer from the adsorbing NO2 molecules. The range of NO2 concentration is tested from 0.5 ppm to 3 ppm and the estimated time taken for 50% increase in Delta lambda(B) ranges from 20 min (for 0.5 ppm) to 6 min (for 3 ppm). (C) 2015 Elsevier B.V. All rights reserved.

Physical insights into salicylic acid release from poly(anhydrides)

Salicylic acid (SA) based biodegradable polyanhydrides (PAHs) are of great interest for drug delivery in a variety of diseases and disorders owing to the multi-utility of SA. There is a need for the design of SA-based PAHs for tunable drug release, optimized for the treatment of different diseases. In this study, we devised a simple strategy for tuning the release properties and erosion kinetics of a family of PAHs. PAHs incorporating SA were derived from related aliphatic diacids, varying only in the chain length, and prepared by simple melt condensation polymerization. Upon hydrolysis induced erosion, the polymer degrades into cytocompatible products, including the incorporated bioactive SA and diacid. The degradation follows first order kinetics with the rate constant varying by nearly 25 times between the PAH obtained with adipic acid and that with dodecanedioic acid. The release profiles have been tailored from 100% to 50% SA release in 7 days across the different PAHs. The release rate constants of these semi-crystalline, surface eroding PAHs decreased almost linearly with an increase in the diacid chain length, and varied by nearly 40 times between adipic acid and dodecanedioic acid PAH. The degradation products with SA concentration in the range of 30-350 ppm were used to assess cytocompatibility and showed no cytotoxicity to HeLa cells. This particular strategy is expected to (a) enable synthesis of application specific PAHs with tunable erosion and release profiles; (b) encompass a large number of drugs that may be incorporated into the PAH matrix. Such a strategy can potentially be extended to the controlled release of other drugs that may be incorporated into the PAH backbone and has important implications for the rational design of drug eluting bioactive polymers.

Low power consumption and high sensitivity carbon monoxide gas sensor using indium oxide nanowire.

In this paper, micro gas sensor was fabricated using indium oxide nanowire for effective gas detection and monitoring system. Indium oxide nanowire was grown using thermal CVD, and their structural properties were examined by the SEM, XRD and TEM. The electric properties for microdropped indium oxide nanowire device were measured, and gas response characteristics were examined for CO gas. Sensors showed high sensitivity and stability for CO gas. And with below 20 mw power consumption, 5 ppm CO could be detected.

Producción de biomasa y concentración de nutrientes en el pasto cubano (Pennisetum purpureum x P. tiphoides) CV CT - 115. Finca la Tigra, Cárdenas, Rivas, Nicaragua

Con el propósito de determinar la producción de la biomasa forrajera y la concentración de nutrientes del pasto cubano CT - 115, se realizó un estudio en la Finca la Tigra, Cárdenas, Rivas, para ello se utilizó un área de 48 m2, subdividida en tres parcelas de 16 m2, donde se realizaron cortes a los 15, 30, 45, 60 y 75 días. Se evaluaron las variables altura de la planta, producción de biomasa fresca y seca por hectárea, en cada muestreo se tomaron muestras de plantas de 1,000 g, las que fueron remitidas al laboratorio de suelo y planta de la UNA, donde se hicieron las determinaciones de contenido de materia seca, % de nitrógeno, % fósforo, % potasio, % calcio, % magnesio, hierro (ppm), manganeso (ppm) y zinc (ppm). Se realizarón análisis de correlación usando el programa SAS (Sistema de Análisis Estadístico) versión 9. para los elementos de la composición nutritiva de la planta y las variables rendimiento de biomasa y altura, a través del programa CVEXPT (Experto de Curvas) versión 1.4, se determinaron las curvas de mejor ajustes para dichas relaciones. Encontrándose que a medida que aumentaba la edad de corte, la producción de biomasa fresca y seca así como la altura tendían a incrementar, inversamente a ello los niveles de nutrientes en las plantas, las ecuaciones de mejor ajustes para la producción de biomasa fresca, seca y altura fueron el Lineal, Logístico y Rotacional, con r2 de 94, 98 y 99% respectivamente, para el caso de los nutrientes las ecuaciones de mejor ajuste fueron: los modelos de función Rotacional, Logístico, Polinomial y Harris también con r2 de 92 a 99%, evidenciándose con esto que las tendencias de los incrementos de la biomasa seca, altura, y la concentración de nutrientes no presentan comportamiento lineal. Únicamente para el caso de la biomasa fresca se presentó una tendencia lineal.

Productividad y concentración de nutrientes del Taiwán Cubano (Pennisetum purpureum X Pennisetum tiphoides), CT 115, en época lluviosa, 2010 en la Fincas Santa Rosa

Con el objetivo de evaluar la Productividad y concentración de nutrientes del pasto cubano (Pennisetum purpureum x Pennisetum typhoides) cv CT – 115, se llevó a cabo la presente investigación en la finca Santa Rosa propiedad de la Universidad Nacional Agraria (UNA) Managua, Nicaragua. Localizada geográficamente a los 12° 08´ 33"de latitud norte y, 86° 10´ 31" de longitud oeste (INETER, 2006). Para ello se utilizó un área total de 33 m2 la cual se subdividió en tres parcelas de 10 m2 cada una donde se realizaron cortes cada 15 días hasta llegar a los 75 días. Se evaluaron las variables : altura, (cm) biomasa fresca (kg ha-1), Materia Seca (%), Biomasa seca (kg ha-1), Nitrógeno (%), Fósforo (%), Potasio (%),Calcio (%), Magnesio (%), Hierro (ppm), Manganeso (ppm), Zinc (ppm). Para la determinación de la producción de biomasa verde y seca (kg ha-1), se utilizó la metodología propuesta por la Red Internacional de evaluación de Pasturas Tropicales (CIAT, 1982). Para determinar los parámetros MS (%) se utilizó la metodología del análisis de Weende o análisis proximal (AOAC. 1990). Para el análisis de correlación se utilizo el programa SAS VERSION 9 para cada uno de las variables evaluadas, para la determinación de las curvas de mejor ajuste se utilizó el programa CVXP32. Durante el ensayo no se aplico ningún tipo de tratamiento agronómico (fertilización, riego). Los resultados obtenidos fueron: Altura 220 cm Biomasa fresca 31,764 kg ha-1 Materia seca 24% Biomasa seca 7529 kg ha-1. Las mayores concentraciones de nutrientes en la planta fueron: N 3.21% P 0.38% K 4.94% Ca 0.24% Mg 0.18% Fe 105.0ppm Mn 53.33ppm Zn 50ppm. Los modelos de mejor ajuste son: Modelo Múltiple Multiplicativo, Modelo Richards, Modelo Harris, Función Rotacional, Tercer Grado Polinomial y Asociación Exponencial.

Evaluación de siete variedades de frijol común (Phaseolus vulgaris L.) y su respuesta a dosis creciente de fertilizantes (N-P)

El experimento fue conducido en la Estación Experimental "La Compañía" Carazo, en época de postrera (octubre diciembre de 1991), en suelos jóvenes de origen volcánico, con altos contenidos de carbono orgánico y alto porcentaje de saturación de bases, ricos en potasio y en algunos sectores deficiente en fósforo (1.5 ppm). Su textura es franca, moderadamente profundos, bien drenados y medianamente ácido a neutro. El experimento se estableció con el objetivo de evaluar la respuesta diferencial de siete variedades de frijol común (Phaseolus vulgaris L.) a dosis creciente de fertilizantes (N+P) utilizando como fuente la formula completa 18-48-0 El diseño utilizado fue Bloque Complete al Azar (BCA) con arreglo bifactorial con tres repeticiones, la parcelas las constituyeron seis surcos separados a 5O cm y con una longitud de 5 m., las parcelas útiles fueron los cuatro surcos centrales de cuatro metros de largo y las evaluaciones realizadas fueron: altura de planta, diámetro del tallo, número de plantas cosechadas por parcela útil, número de vaina por planta, número de grano por vaina peso de 100 granos, rendimiento de granos 14% de humedad y análisis foliar. Los resultados indican que el rendimiento de grano no mostró diferencias estadísticas significativas tanto para variedades como para los niveles de fertilizantes (N+P), sin embargo, podemos señalar que todas las variedades superaron numéricamente al testigo Rev-79, presentando el mayor promedio la DOR-391. En cuanto a los niveles, también presentaron diferencias numéricas obteniendo el mayor promedio el testigo (cero aplicación), lo cual indica que en el suelo se encontraban suficiente nutrientes para satisfacer la demanda de la planta.

Efecto de la fertilización fosfórica sobre el crecimiento y rendimiento de cuatro variedades de frijol común (Phaseolus vulgaris L.)

El experimento fue conducido en la Estación Experimental ”La Compañía" Carazo, en época de postrera (Octubre-Diciembre ) de 1988, en suelos de bajo contenido de fósforo (1.5 ppm) y de textura franco limoso. Con el objetivo de determinar la respuesta a la aplicación creciente de fósforo, cuatro variedades de frijol común: Cua 88, Compañía 88, Nicaragua 88 y Revolución 79; fueron evaluadas bajo cuatro niveles de P en forma de P2O5; 0, 46, 92,138 kg/ha, utilizando triple superfosfato como fuente de fósforo. El diseño utilizado fue el de bloque completo al azar, con tres repeticiones. Los resultados indican que las variedades Cua 88, Compañía 88 y Nicaragua 88 son variedades eficientes sin respuesta a la aplicación de fósforo y Revolución 79 Ineficiente con respuesta. El rendimiento de las variedades eficientes sin respuesta es superior al de Revolución 79 que es un material que requiere de la fertilización fosfórica.

Efecto de los niveles de fósforo y uso de nitrógeno en el crecimiento, desarrollo y rendimiento del cultivo de la soya (Glycine max (L) Merril)

El presente trabajo se realizó en el Centro Experimental del Algodón (C.E.A) el cual se conoce como C.E.A - FUNDA (Fundación para el Desarrollo Agrícola), ubicado en Posoltega, Chinandega. El experimento se estableció en Agosto 1992, en un suelo franco arenoso. Utilizándose la variedad Cristalina. La cosecha se realizó a los 120 días después de siembras. Los tratamientos fueron arreglados en un diseño de bloques completos al azar (B.C.A.), con cinco tratamientos y cuatro repeticiones. Los tratamientos fueron: T1= Inoculante; T2= Inoculante + 30 kg/ha de P2O5; T3= Inoculante + 60 kg/ha de P205; T4= Inoculante + 90 kg/ha de P2O5; T5 Inoculante + 10 kg/ha de N2. Se evaluó el efecto de los niveles de fósforo y de nitrógeno sobre el crecimiento, desarrollo y rendimiento del cultivo de la soya (Glycine max (L) Merril) . En los diferentes niveles de fósforo y nitrógeno las variables evaluadas no mostraron diferencias significativas, sin embargo, numéricamente en la cantidad de nódulos, usando I + 10 kg/ha N2 (T5) ) presentó menor número y el Testigo (T1) mayor cantidad. Ei resto de los tratamientos tuvo similar comportamiento. En cuanto a la altura de la planta no se observó ningún efecto. El cultivo se desarrolló de acuerdo a la característica de la variedad Cristalina. En el rendimiento no se obtuvo diferencia significativa, sin embargo, el tratamiento con uso de inoculante y con mayor nivel de fósforo T4 (Inoculante + 90 kg/ha de P2O5), produjo un rendimiento ligeramente mayor en relación a los otros tratamientos. Entre los diferentes tratamientos evaluados en un suelo con 8 partes por millón (ppm) de fósforo se pudo concluir que el cultivo de la soya con o sin las aplicaciones de fósforo y de nitrógeno no ejercieron efectos significativos y que la forma más económica de producir soya es usando inoculantes.