849 resultados para uses of research
Resumo:
AIM: To provide insight into cancer registration coverage, data access and use in Europe. This contributes to data and infrastructure harmonisation and will foster a more prominent role of cancer registries (CRs) within public health, clinical policy and cancer research, whether within or outside the European Research Area. METHODS: During 2010-12 an extensive survey of cancer registration practices and data use was conducted among 161 population-based CRs across Europe. Responding registries (66%) operated in 33 countries, including 23 with national coverage. RESULTS: Population-based oncological surveillance started during the 1940-50s in the northwest of Europe and from the 1970s to 1990s in other regions. The European Union (EU) protection regulations affected data access, especially in Germany and France, but less in the Netherlands or Belgium. Regular reports were produced by CRs on incidence rates (95%), survival (60%) and stage for selected tumours (80%). Evaluation of cancer control and quality of care remained modest except in a few dedicated CRs. Variables evaluated were support of clinical audits, monitoring adherence to clinical guidelines, improvement of cancer care and evaluation of mass cancer screening. Evaluation of diagnostic imaging tools was only occasional. CONCLUSION: Most population-based CRs are well equipped for strengthening cancer surveillance across Europe. Data quality and intensity of use depend on the role the cancer registry plays in the politico, oncomedical and public health setting within the country. Standard registration methodology could therefore not be translated to equivalent advances in cancer prevention and mass screening, quality of care, translational research of prognosis and survivorship across Europe. Further European collaboration remains essential to ensure access to data and comparability of the results.
Resumo:
rare: "The New York Public Library. 50th anniversary program. Trustees luncheon, May 23 [1961]" (1 L.) and list of persons attending luncheon (6 L.) laid in.
Resumo:
Bibliography: p. 103-143.
Resumo:
Mode of access: Internet.
Resumo:
Whiteness studies are trans-disciplinary, but here the focus is principally on sociology and social history. Firstly, I identify, elucidate and synthesize the major ways in which whiteness in this literature has hitherto been problematized, to provide a sociological view of the multidisciplinary work so far. Five interpretations are identified; whiteness as absence, as content, as a set of norms, as resources and as a contingent hierarchy. Secondly, I make some proposals regarding the whiteness problematic’s degree of pertinence to European settings, with a brief discussion of the Irish case. Finally, I argue that whiteness is useful if conceptualized in a way that sets it within the parameters of studies of racism.
Resumo:
This paper analyzes the formation of Research Corporations as an alternative governance structure for performing R&D compared to pursuing in-house R&D projects. Research Corporations are privatefor-profit research centers that bring together several firms with similar research goals. In a Research Corporation formal authority over the choice of projects is jointly exercised by the top management of the member firms. A private for-profit organization cannot commit not to interfere with the project choice of the researchers. However, increasing the number of member firms of the Research Corporation reduces the incentive of member firms to meddle with the research projects of researchers because exercising formal authority over the choice of research projects is a public good. The Research Corporation thus offers researchers greater autonomy than a single firm pursuing an identical research program in its in-house R&D department. This attracts higher ability researchers to the Research Corporation compared to the internal R&D department. The paper uses the theoretical model to analyze the organization of the Microelectronics and Computer Technology Corporation (MCC). The facts of this case confirm the existence of a tension between control over the choice of research projects and the ability of researchers that the organization is able to attract or hold onto.
Resumo:
Research on regulation has crossed paths with the literature on policy instruments, showing that regulatory policy instruments contain cognitive and normative beliefs about policy. Thus, their usage stacks the deck in favor of one type of actor or one type of regulatory solution. In this article, we challenge the assumption that there is a predetermined relationship between ideas, regulatory policy instruments, and outcomes. We argue that different combinations of conditions lead to different outcomes, depending on how actors use the instrument. Empirically, we analyze 31 EU and UK case studies of regulatory impact assessment (RIA) - a regulatory policy instrument that has been pivotal in the so-called better regulation movement. We distinguish four main usages of RIA, that is, political, instrumental, communicative, and perfunctory. We find that in our sample instrumental usage is not so rare and that the contrast between communicative and political usages is less stark than is commonly thought. In terms of policy recommendations, our analysis suggests that there may be different paths to desirable outcomes. Policymakers should therefore explore different combinations of conditions leading to the usages they deem desirable rather than arguing for a fixed menu of variables.
Resumo:
This piece of work which is Identification of Research Portfolio for Development of Filtration Equipment aims at presenting a novel approach to identify promising research topics in the field of design and development of filtration equipment and processes. The projected approach consists of identifying technological problems often encountered in filtration processes. The sources of information for the problem retrieval were patent documents and scientific papers that discussed filtration equipments and processes. The problem identification method adopted in this work focussed on the semantic nature of a sentence in order to generate series of subject-action-object structures. This was achieved with software called Knowledgist. List of problems often encountered in filtration processes that have been mentioned in patent documents and scientific papers were generated. These problems were carefully studied and categorized. Suggestions were made on the various classes of these problems that need further investigation in order to propose a research portfolio. The uses and importance of other methods of information retrieval were also highlighted in this work.
Resumo:
Peer-reviewed
Resumo:
Ce mémoire analyse trois réformes majeures de politique sociale en Turquie, en deux domaines: emploi et sécurité social. En utilisant l'approche "Usage de l'Europe", ce mémoire developpe une analyse empirique et apporte une explication théorique de ces changements qui ont été introduits au cours du processus d'adhésion de la Turquie à l'Union européenne. "Les usages de l'Europe" est une approche d'européanisation qui se concentre sur le rôle des acteurs domestiques, au sein des États membres et candidats, ainsi que de leur utilisation des ressources de l'Union européenne. Les études de cas utilisées dans cette thèse démontrent l'introduction de changements au niveau de l'État-providence; ainsi, l'approche originelle est suppléée par des concepts provenant de la littérature sur la politique partisane, les institutions formelles et l'héritage des politiques. Cette recherche utilise la méthode de l'analyse de processus pour suivre la réforme des règlements du travail par la voie de reconstitution des droits individuels des travailleurs et de l'Agence d'emploi en Turquie jusqu'en 2003, ainsi que la transformation du système de sécurité sociale en 2008. Ces trois réformes représentent des changements majeurs tant sur le plan institutionnel que politique en Turquie depuis 2001. Afin de comprendre "les usages de l'Europe" dans ces réformes politiques, l'analyse empirique questionne, si, quand et comment les acteurs turcs ont utilisé les ressources, les références et les développements politiques de l'Union européenne lors de ce processus dynamique de réforme. Les réformes du système de sécurité sociale, des règlements du travail, en plus de la reconstitution de l'Agence d'emploi étaient à l'ordre du jour en Turquie depuis les années 1990. La réforme des règlements du travail ont entraîné l'introduction des accommodements flexibles au travail et une révision de la Loi du travail permettant l'établissement d'une législation de la sécurité d'emploi. La reconstitution de l'Agence d'emploi visait à remplacer la vieille institution défunte par une institution moderne afin d'introduire des politiques d'activation. La réforme de sécurité sociale comprend les pensions de retraite, le système de santé ainsi que l'administration des institutions de sécurité sociale. Les principaux résultats révèlent que la provision des ressources de l'Union européenne en Turquie a augmenté à partir de la reconnaissance de sa candidature en 1999 et ce, jusqu'au lancement des négociations pour son adhésion en 2005; ce qui fut une occasion favorable pour les acteurs domestiques impliqués dans les processus de réformes. Cependant, à l'encontre de certaines attentes originelles de l'approche de "les usages de l'Europe", les résultats de cette recherche démontrent que le temps et le sort de "les usages de l'Europe" dépendent des intérêts des acteurs domestiques, ainsi de leurs stratégies tout au long de ce processus de réforme, plutôt que des phases du processus ou la quantité des ressources fournies par l'Union européenne.
Resumo:
Two ongoing projects at ESSC that involve the development of new techniques for extracting information from airborne LiDAR data and combining this information with environmental models will be discussed. The first project in conjunction with Bristol University is aiming to improve 2-D river flood flow models by using remote sensing to provide distributed data for model calibration and validation. Airborne LiDAR can provide such models with a dense and accurate floodplain topography together with vegetation heights for parameterisation of model friction. The vegetation height data can be used to specify a friction factor at each node of a model’s finite element mesh. A LiDAR range image segmenter has been developed which converts a LiDAR image into separate raster maps of surface topography and vegetation height for use in the model. Satellite and airborne SAR data have been used to measure flood extent remotely in order to validate the modelled flood extent. Methods have also been developed for improving the models by decomposing the model’s finite element mesh to reflect floodplain features such as hedges and trees having different frictional properties to their surroundings. Originally developed for rural floodplains, the segmenter is currently being extended to provide DEMs and friction parameter maps for urban floods, by fusing the LiDAR data with digital map data. The second project is concerned with the extraction of tidal channel networks from LiDAR. These networks are important features of the inter-tidal zone, and play a key role in tidal propagation and in the evolution of salt-marshes and tidal flats. The study of their morphology is currently an active area of research, and a number of theories related to networks have been developed which require validation using dense and extensive observations of network forms and cross-sections. The conventional method of measuring networks is cumbersome and subjective, involving manual digitisation of aerial photographs in conjunction with field measurement of channel depths and widths for selected parts of the network. A semi-automatic technique has been developed to extract networks from LiDAR data of the inter-tidal zone. A multi-level knowledge-based approach has been implemented, whereby low level algorithms first extract channel fragments based mainly on image properties then a high level processing stage improves the network using domain knowledge. The approach adopted at low level uses multi-scale edge detection to detect channel edges, then associates adjacent anti-parallel edges together to form channels. The higher level processing includes a channel repair mechanism.