1000 resultados para troca iônica
Resumo:
Culture supernatant of Staphylococcus aureus 722 in 3% triptone plus 1% yeast extract was used for EEA purification, proceeding comparison between dye ligand Red A affinity chromatography and classic chromatography. The capture of SEA with Amberlite CG-50 allowed rapid enterotoxin concentration from the culture supernatant. However, the ratio of 15 mg of the resin to a total of 150 mg of the toxin satured the resin, giving only 10 to 30% of SEA recuperation from the supernatant. The elution of concentrated material throught the Red A column resulted in a recovery of 60,87% of the toxin, and required 76 hours, indicating advantage on classic chromatography. Ion exchange column plus gel filtration recovered only 6,5 % of the SEA, and required 114 hours to conclude the procedure. The eletrophoresis of purified SEA indicated high grade of toxin obtained from Red A column, with 90 % of purity, compared to 60 % of classic column.
Resumo:
A avaliação do método modificado da resina de troca de íons para extração de Mn e Fe dos solos foi o objetivo desta pesquisa. Foram utilizadas 44 amostras de solo, cujos teores de Mn variaram de baixos a altos e de Fe de médios a altos. Como plantas-teste, utilizaram-se o milho e a soja, cultivadas em casa de vegetação. O Fe e o Mn do solo foram determinados, usando o método modificado da resina de troca de íons, DTPA, AB-DTPA, Mehlich-1 e Mehlich-3. Os coeficientes de correlação entre Mn no solo e Mn acumulado na parte aérea da soja foram: resina (0,62*), DTPA (0,58*), Mehlich-3 (0,54*), Mehlich-1 (0,51*) e AB-DTPA (0,26NS). Para o milho, houve correlação entre Mn-solo e Mn-planta somente nas amostras de solo com baixos teores desse elemento, para todos os extratores, exceto para AB-DTPA. Concluiu-se que a resina foi tão eficiente quanto os extratores DTPA, M-1 e M-3 em avaliar a disponibilidade de Mn para a soja, e que nenhum extrator foi eficiente em avaliar a disponibilidade de Fe para as plantas de milho e soja, com 53 dias de idade, cultivadas em casa de vegetação.
Resumo:
Rare earth elements supported in zeolites are the most important catalysts in the fluid cracking of petroleum. The solid state ion exchange of Eu3+ in Y zeolite was investigated. First of all, the hydrated EuCl3 was well mixed in a ball mill and was then heated at 300ºC for different times. The quantitative determination of Eu3+ showed that the degree of ion exchange depends on the reaction time at constant temperature, being ~95% in 4 h. The X-ray study showed that the crystallinity of the zeolite is little affected by the exchange procedure. The study of spectroscopic properties of Eu3+, emission spectra and lifetime, give information about the migration and position of the ion in the zeolite cages.
Resumo:
A new method for determination of potassium in honey samples of different colors was developed as an alternative method for determination of this metal. Analysis of genuine honeys attested by the qualities and quantities tests officially adopted in Brazil, showed that the concentration of potassium ranged from 181 to 315 mg/kg for light honeys, from 393 to 570 mg/kg for medium honeys and from 791 to 915 mg/kg for dark honeys. Recoveries making use of spikes of potassium added to the honey samples and to the deionized distilled water showed results close by hundred percent at pH <= 2,0 under temperature bellow 20°C.
Resumo:
The development associated with the research field involving crystalline inorganic lamellar titanium hydrogenphosphate, Ti(HPO4).H2O, synthesized as alpha or gamma forms, is directly linked to the huge number of reactions, that occur inside the free interlamellar space. Two distinguishable well-characterized features such as ion-exchange and intercalation reactions are explored here. From the interactive point of view, the acidic OH centres distributed on the lamella can interact with cations or with basic polar molecules to exchange or to intercalate them. These chemical reactions are normally followed by an expansion of the interlamellar space, proportional to the amount intercalated, reflecting in ion radii or organic molecule size lengths used in ion-exchange or insertion processes, respectively. The effectiveness of the exchange increased when the original matrix has the proton of OH group previously ion-exchanged by an alkaline or an alkylammonium cations. Monoalkyl-, dialkyl- and heterocyclic amines are focused in this revision as clear and elucidative examples of acid-base interactive processes, that come out inside of the well-formed infinite sequence of inorganic lamellar structure.
Resumo:
A demonstractive experiment was proposed in order to verify students' habilities in recognizing the presence and nature of ions in solutions, before and after their passage through ion-exchange columns. The students have no previous contact with ion-exchange resins, so they must deduce how they work and explain the experimental facts. The performance of classes, at different stages of learning, is compared and discussed.
Resumo:
KBrO3 is registered by the FAO/OMS as a genotoxic and carcinogenic compound. In spite of this, KBrO3 is still employed by Brazilian bakeries. Nowadays ion exchange chromatography (IEC) is the most rapid and trustful method for BrO3- analysis. When at high concentrations, chloride ions can interfere in the BrO3- analysis, if the detection is performed by electrical conductivity. On the other hand, spectrophotometric detection, presented here is based on the absorption of BrO3- in the ultraviolet region (210 - 230 nm) where the absortion of chloride ions is very low, thus making possible the qualitative and quantitative analysis of BrO3- in flour improver samples.
Resumo:
Plant extracts are usually complex mixtures which contain several molecules of different sizes with varied functional groups. Such extracts are a challenge to the chemist of natural products. Ion exchange chromatography in non-aqueous medium, used for separation of basic or acidic fractions from plant extracts, is an important unit operation in preparative scale separations. Anionic macroporous resin in non-aqueous medium was used with success in this study for separation of the acid fraction of Copaifera multijuga (Copaiba oil), rich in labdanic diterpenes and for the methanolic extract of Croton cajucara (acetyl aleuritoric acid).
Resumo:
The niobate with formula K4Nb6O17 has a layered structure formed by stacked negative sheets and exchangeable cations in the interlayer region. In this study we discuss some structural aspects related to the ion exchange in layered hexaniobate based on X-ray diffractometry and vibrational Raman spectroscopy data. Hexaniobate has two distinct interlayer regions and the potassium ions of one interlayer in particular are preferably exchanged by other cations, leading to an interstratified material.
Resumo:
Ion exchange method was employed by means of surface modification of the glass powders of LZSA (Li2O-ZrO2-SiO2-Al2O3) system submitted to a 70wt% NaNO3/30wt% NaSO4 bath salt followed by a heat treatment. Chemical analysis by X-ray fluorescence was used to evaluate the efficiency of ion exchange, while optical dilatometry was employed to evaluate sintering of compacts. Evaluation of the structure of sintered bodies was made by scanning electron microscopy. Substitution of Li+ ions by Na+ ions on the surface of powders during heat treatments of 450 and 600 ºC for 2-10 h promoted an increase in densification of the sintered bodies.
Resumo:
Foi investigada a remoção dos íons Al3+, Mn2+, Cu2+, Zn2+, Cd2+ and Pb2 +, em solução aquosa, por apatitas sintéticas usando o método de coluna. Sob as mesmas condições, hidroxiapatitas foram mais seletivas para a remoção de cátions que carboapatitas. Usando hidroxiapatita, a capacidades de troca aumentaram na seguinte ordem: Mn2+ < Zn2+ < Cu2+ < Cd2+ < Al3+ < Pb2+. A seqüência acima é similar a obtida em trabalhos prévios, usando o método de batelada. Análises de DRX e IV indicaram a formação de uma fase única atribuída a uma Pb-apatita.
Resumo:
Um método envolvendo a pré-concentração e redissolução anódica em condições de voltametria de pulso diferencial empregando um eletrodo de pasta de carbono modificado (EPCM) com uma resina de troca iônica Amberlite IR120 foi proposto para a determinação de íons chumbo em álcool combustível. O procedimento é baseado em um pico de oxidação do analito observado em -0,53 V(vs. Ag/AgCl) em solução de HCl. As melhores condições experimentais encontradas foram: 5% (m/m) da Amberlite IR120 para a construção do eletrodo, solução de HCl 0,1 mol L-1, velocidade de varredura de 10 mVs-1, tempo de pré-concentração de 15 min e amplitude de pulso de 100 mV. Utilizando essas condições, o EPCM apresentou uma resposta linear entre a corrente de pico anódica e a concentração de íons chumbo para o intervalo entre 9,9 x 10-9 e 1,2 x 10-6 mol L-1 e um limite de detecção de 7,2 x 10-9 mol L-1. Valores de recuperação entre 96 % e 102 % foram encontrados para amostras de álcool combustível enriquecidas com Pb2+ em níveis de 10-7 mol L-1. O efeito da presença de outros íons concomitantes sobre a resposta voltamétrica do eletrodo também foi avaliado.
Resumo:
O presente trabalho compara processos de purificação de enterotoxina estafilocócica A, utilizando cromatografia de afinidade com corante Red A em relação a troca iônica (SP - Sephadex C-25) - permeabilidade em gel (Sephadex G-75). Aplicou-se nas colunas o sobrenadante da cultura de Staphylococcus aureus 722 em caldo contendo 3% de triptona e suplementado com 1% de extrato de levedura, previamente concentradas com Amberlite CG-50. O processo capturou rapidamente a EEA, porém a proporção de 15 mg de resina para 150 mg de toxina causou saturação, recuperando apenas 10 a 30% de toxina do sobrenadante. A cromatografia de afinidade com Red A permitiu a recuperação de 60,87% de toxina aplicada em 76 horas, em relação a 114 horas requeridas para purificação utilizando coluna de troca iônica e permeabilidade em gel, com rendimento de 6,5%. O perfil eletroforético das amostras purificadas indicaram que, a toxina obtida da coluna Red A apresentou teor de pureza superior, na ordem de 90%, em relação a 60% atingida pelo método clássico.
Resumo:
Este trabalho tem como objetivo o desenvolvimento e a aplicação de métodos de caracterização de filmes ópticos, associados à sua estrutura inomogênea ou anisotrópica. Os materiais estudados são guias ópticos planares e filmes compósitos com propriedades ópticas não-lineares. Esses materiais são relevantes para aplicações na área de optoeletrônica e óptica integrada. O trabalho é dividido em duas partes principais. A primeira parte é dedicada à caracterização de guias de onda planares produzidos por troca iônica, vidros dopados com íons de Ag e/ou K, através de um e/ou dois processos de troca. O perfil de índice de refração é estudado através da técnica de Modos Guiados, uma técnica óptica empregada tradicionalmente em guias desse tipo. Em complementação a essa medida óptica, são realizadas medidas do perfil de concentração do íon dopante, empregando as técnicas de RBS e EDS. É dedicado um interesse especial pela região próxima à superfície da amostra, a região crítica na análise por Modos Guiados. Os métodos de Abelès-Hacskaylo e de Brewster-Pfund são estendidos a esses guias inomogêneos, permitindo a medida direta do valor do índice de refração superficial. Essa informação e os dados obtidos por Modos Guiados permitem a determinação de um perfil de índice de refração mais acurado ao longo da profundidade do guia. A segunda parte é dedicada ao estudo de materiais compósitos: filmes finos constituídos por uma matriz (silicato, silicato + PVP, e PMMA) dopada com moléculas orgânicas que apresentam propriedades ópticas não-lineares de segunda ordem (PNA, DR-1 e HBO-BO6). Nessas amostras, é aplicado um campo elétrico de alta voltagem (efeito corona), gerando um alinhamento dos cromóforos dopantes. Essa mudança na simetria estrutural do material, de isotrópica para uniaxial, é observada através da assimetria correspondente no valor do índice de refração (birrefringência). O valor da birrefringência induzida é obtido através da medida da variação da refletância de luz pelo material, auxiliada por medidas prévias das constantes ópticas do material por Elipsometria.
Resumo:
The city of Natal comprises an area of about 170 km² (65,63 squares miles). The Dunas-Barreiras Aquifer is the most important reservoir of the coastal basin of RN. It is being responsible for the water supplying of about 70% of the population, however, due to the sewage disposal system by cesspools and drains, it is presently affected in a great extent by nitrates contamination. Thus, the present work proposes to research the utilization of contaminated water by nitrates of this fountainhead and find cost of the potable water through the ionic exchange technology. This technology consists in the removal of mineral salts by the exchange of cations for one ion of hydrogen (H+), through the passage of water by cationic resin bed and, secondly, by the exchange of the anions for hydroxyl ions (OH-) through a anionic resin bed. The obtained results have showed the waters derived from fountains, big water holes and shallow wells were microbiologically contaminated, while the waters derived from deep wells (above 70 m 76,58 yards) were free of contamination. Thus, only these ones are suitable to the use of ionic technology. The experiments were conducted with the resin IMAC-HP-555 such as kinetic, thermodynamic, and adsorption by fixed bed studies, being obtained several project variables for the experimental column, as follow: work temperature of 25oC; resin maximum capacity maximum e mean of adsorption ==0,01692 g NO3-1/g R e 0,0110 g NO3-1/g R, respectively. On the experimental column were performed breakthrough tests which pointed for an average ideal average speed of work of 13.2 m / h, with an average efficiency of 45% of adsorption, an optimal concentration of NaCl desorption of 8%, and an ideal desorption time of 80 minutes for the equilibrium conditions of water from the Dunas-Barreiras aquifer. Scale projection for ion-exchange column for denitrification, for these variables, using a computer modeling programme, to project the column of ion exchange ROREX-420/2000, obtained a cost for the drinking water denitrified by this system of R$ 0,16 / m3