895 resultados para polystyrene particles


Relevância:

70.00% 70.00%

Publicador:

Resumo:

During the last years great effort has been devoted to the fabrication of superhydrophobic surfaces because of their self-cleaning properties. A water drop on a superhydrophobic surface rolls off even at inclinations of only a few degrees while taking up contaminants encountered on its way. rnSuperhydrophobic, self-cleaning coatings are desirable for convenient and cost-effective maintenance of a variety of surfaces. Ideally, such coatings should be easy to make and apply, mechanically resistant, and long-term stable. None of the existing methods have yet mastered the challenge of meeting all of these criteria.rnSuperhydrophobicity is associated with surface roughness. The lotus leave, with its dual scale roughness, is one of the most efficient examples of superhydrophobic surface. This thesis work proposes a novel technique to prepare superhydrophobic surfaces that introduces the two length scale roughness by growing silica particles (~100 nm in diameter) onto micrometer-sized polystyrene particles using the well-established Stöber synthesis. Mechanical resistance is conferred to the resulting “raspberries” by the synthesis of a thin silica shell on their surface. Besides of being easy to make and handle, these particles offer the possibility for improving suitability or technical applications: since they disperse in water, multi-layers can be prepared on substrates by simple drop casting even on surfaces with grooves and slots. The solution of the main problem – stabilizing the multilayer – also lies in the design of the particles: the shells – although mechanically stable – are porous enough to allow for leakage of polystyrene from the core. Under tetrahydrofuran vapor polystyrene bridges form between the particles that render the multilayer-film stable. rnMulti-layers are good candidate to design surfaces whose roughness is preserved after scratch. If the top-most layer is removed, the roughness can still be ensured by the underlying layer.rnAfter hydrophobization by chemical vapor deposition (CVD) of a semi-fluorinated silane, the surfaces are superhydrophobic with a tilting angle of a few degrees. rnrnrn

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The human airway epithelium serves as structural and functional barrier against inhaled particulate antigen. Previously, we demonstrated in an in vitro epithelial barrier model that monocyte derived dendritic cells (MDDC) and monocyte derived macrophages (MDM) take up particulate antigen by building a trans-epithelial interacting network. Although the epithelial tight junction (TJ) belt was penetrated by processes of MDDC and MDM, the integrity of the epithelium was not affected. These results brought up two main questions: (1) Do MDM and MDDC exchange particles? (2) Are those cells expressing TJ proteins, which are believed to interact with the TJ belt of the epithelium to preserve the epithelial integrity? The expression of TJ and adherens junction (AJ) mRNA and proteins in MDM and MDDC monocultures was determined by RT-PCR, and immunofluorescence, respectively. Particle uptake and exchange was quantified by flow cytometry and laser scanning microscopy in co-cultures of MDM and MDDC exposed to polystyrene particles (1 μm in diameter). MDM and MDDC constantly expressed TJ and AJ mRNA and proteins. Flow cytometry analysis of MDM and MDDC co-cultures showed increased particle uptake in MDDC while MDM lost particles over time. Quantitative analysis revealed significantly higher particle uptake by MDDC in co-cultures of epithelial cells with MDM and MDDC present, compared to co-cultures containing only epithelial cells and MDDC. We conclude from these findings that MDM and MDDC express TJ and AJ proteins which could help to preserve the epithelial integrity during particle uptake and exchange across the lung epithelium.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

ABSTRACT: BACKGROUND: Experimental studies provide evidence that inhaled nanoparticles may translocate over the airspace epithelium and cause increased cellular inflammation. Little is known, however, about the dependence of particle size or material on translocation characteristics, inflammatory response and intracellular localization. RESULTS: Using a triple cell co-culture model of the human airway wall composed of epithelial cells, macrophages and dendritic cells we quantified the entering of fine (1 mum) and nano-sized (0.078 mum) polystyrene particles by laser scanning microscopy. The number distribution of particles within the cell types was significantly different between fine and nano-sized particles suggesting different translocation characteristics. Analysis of the intracellular localization of gold (0.025 mum) and titanium dioxide (0.02-0.03 mum) nanoparticles by energy filtering transmission electron microscopy showed differences in intracellular localization depending on particle composition. Titanium dioxide nanoparticles were detected as single particles without membranes as well as in membrane-bound agglomerations. Gold nanoparticles were found inside the cells as free particles only. The potential of the different particle types (different sizes and different materials) to induce a cellular response was determined by measurements of the tumour necrosis factor-alpha in the supernatants. We measured a 2-3 fold increase of tumour necrosis factor-alpha in the supernatants after applying 1 mum polystyrene particles, gold nanoparticles, but not with polystyrene and titanium dioxide nanoparticles. CONCLUSION: Quantitative laser scanning microscopy provided evidence that the translocation and entering characteristics of particles are size-dependent. Energy filtering transmission electron microscopy showed that the intracellular localization of nanoparticles depends on the particle material. Both particle size and material affect the cellular responses to particle exposure as measured by the generation of tumour necrosis factor-alpha.

Relevância:

70.00% 70.00%

Publicador:

Resumo:

The respiratory tract is an attractive target organ for novel diagnostic and therapeutic applications with nano-sized carriers, but their immune effects and interactions with key resident antigen-presenting cells (APCs) such as dendritic cells (DCs) and alveolar macrophages (AMs) in different anatomical compartments remain poorly understood. Polystyrene particles ranging from 20 nm to 1,000 nm were instilled intranasally in BALB/c mice, and their interactions with APC populations in airways, lung parenchyma, and lung-draining lymph nodes (LDLNs) were examined after 2 and 24 hours by flow cytometry and confocal microscopy. In the main conducting airways and lung parenchyma, DC subpopulations preferentially captured 20-nm particles, compared with 1,000-nm particles that were transported to the LDLNs by migratory CD11blow DCs and that were observed in close proximity to CD3+ T cells. Generally, the uptake of particles increased the expression of CD40 and CD86 in all DC populations, independent of particle size, whereas 20-nm particles induced enhanced antigen presentation to CD4+ T cells in LDLNs in vivo. Despite measurable uptake by DCs, the majority of particles were taken up by AMs, irrespective of size. Confocal microscopy and FACS analysis showed few particles in the main conducting airways, but a homogeneous distribution of all particle sizes was evident in the lung parenchyma, mostly confined to AMs. Particulate size as a key parameter determining uptake and trafficking therefore determines the fate of inhaled particulates, and this may have important consequences in the development of novel carriers for pulmonary diagnostic or therapeutic applications.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Prussian Blue has been introduced as a mediator to achieve stable, sensitive, reproducible, and interference-free biosensors. However, Na(+), Li(+), H(+), and all group II cations are capable to block the activity of Prussian Blue and, because Na(+) can be found in most human fluids, Prussian Blue analogs have already been developed to overcome this problem. These analogs, such as copper hexacyanoferrate, have also been introduced in a conducting polypyrrole matrix to create hybrid materials (copper hexacyanoferrate/polypyrrole, CuHCNFe/Ppy) with improved mechanical and electrochemical characteristics. Nowadays, the challenges in amperometric enzymatic biosensors consist of improving the enzyme immobilization and in making the chemical signal transduction more efficient. The incorporation of nanostructured materials in biosensors can optimize both steps and a nanostructured hybrid CuHCNFe/Ppy mediator has been developed using a template of colloidal polystyrene particles. The nanostructured material has achieved sensitivities 7.6 times higher than the bulk film during H(2)O(2) detection and it has also presented better results in other analytical parameters such as time response and detection limit. Besides, the nanostructured mediator was successfully applied at glucose biosensing in electrolytes containing Prussian Blue blocking cations. (C) 2008 The Electrochemical Society.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

n der vorliegenden Dissertation wurde systematisch die Interaktion von rnunterschiedlichen polymeren Nanopartikeln auf die Zellfunktionalität und das rnDifferenzierungspotential zweier humaner Stammzelllinien (mesenchymale und rnhämatopoetische Stammzellen) untersucht. Als Modellsystem wurden Polystyrol-rnPartikel für bioinerte Nanopartikel und PLLA-Partikel als Modell für bioabbaubare Nanopartikel gewählt. rnDie Analyse der Partikelaufnahme und der Zytotoxizität ergab, dass alle getesteten Partikel nach einen Zeitraum von 24 h und einer Inkubation mit 300 µg/mL Partikeln in beiden Zellsorten nicht toxisch waren. Für die CTMA-Cl-stabilisierten Partikel wurde während Differenzierungsversuche mit hMSCs eine Langzeittoxizität festgestellt, so dass diese Partikel für weitere Versuche nicht verwendet werden konnten. rnAlle Partikel wurden in die Zellen aufgenommen. Die Lutensol-stabilisierten Polystyrol-Partikel zeigten sowohl in unfunktionalisierter Form als auch mit Aminogruppen auf der Oberfläche ein geringeres Aufnahmeverhalten in hMSCs und wurden deswegen nicht für weitere Versuche verwendet. Die SDS-stabilisierten Polystyrol-Partikel zeigten eine gute Aufnahme, die durch die funktionalisierung mit Carboxylgruppen um ca. das 3-fache rnverstärkt werden konnte (hMSCs). Gleiches wurde für die CTMA-Cl stabilisierten rnPolystyrol und dem dazugehörigen aminofunktionalisierten Partikel beobachtet rn(hMSCs). In hHSCs wurden nur die SDS-stabilisierten Polystyrol-Partikel (nicht rnfunktionalisiert, carboxylfunktionalisiert) getestet. Hierbei konnte kein Unterschied bezüglich der Aufnahme festgestellt werden. Die PLLA- und PLLA-Fe-Partikel wurden sowohl in hMSCs als auch in hHSCs sehr gut und besser als die Polystyrol-Partikel aufgenommen. Das in den Partikeln eingebaute Magnetit zeigt keine Auswirkungen auf die Zellaufnahme. Für weitere Versuche wurden deshalb auf Grund der Aufnahme und Toxizitätsdaten die SDS-stabilisierten Polystyrol-Partikel (PS und PS-COOH) sowie die ebenfalls SDS-stabilisierten PLLA-Partikel (PLLA und PLLA-Fe) gewählt. Somit standen 4 Partikel zur Auswahl, die sich sowohl in ihrer Größe als auch im verwendeten Tensid nicht unterscheiden und so Aussagen über den Einfluss von Oberflächenfunktionalisierung sowie Magnetit zulassen. rnDie Zellfunktionalität der hMSCs unter Partikeleinfluss wurde mit Hilfe von IL-6 und IL-8 Messungen untersucht, hierbei zeigte sich, dass nur der PLLA-Fe-Partikel zu einer signifikant erhöhten IL-8 Ausschüttung führte, die Sekretion von IL-6 blieb vollständig unverändert. Die IL-8 Sekretion der hHSCs wurde durch die Anwesenheit der Partikel nicht verändert. rnUm den Einfluss der oben beschriebenen Partikel auf das Differenzierungspotential von hMSCs und hHSCs zu untersuchen, wurden beide Zelllinien vor der Induktion der Differenzierung für 24 h mit 300 µg/mL Partikeln inkubiert. Sowohl die histochemischen Färbungen der differenzierten hMSCs als auch die CD-Marker-Färbungen der differenzierten hHSCs zeigten keinen Einfluss der Partikel auf die Differenzierungsfähigkeit. Bei den hMSCs konnte auch keine durch die Partikel hervorgerufene Differenzierung nachgewiesen werden. Die Analyse der Differenzierung auf RNA-Ebene (qPCR) ergab jedoch für beide Zelllinien, dass einzelne Partikel einzelne Differenzierungsmarker in ihrer Expression positiv oder negativ beeinflussen. Einzig der PLLA-Partikel zeigt bei allen untersuchten Differenzierungsrichtungen in beiden Zelllinien rnkeine Veränderung der Expression. Die jeweils beobachteten Expressionsveränderungen sind jedoch nicht stark genug, um die Differenzierung sichtbar zu beeinflussen, was die histologischen bzw. CD-Marker-Färbungen gezeigt haben. rnIn einem Kooperationsprojekt mit der Gruppe von Arancha del Campo (MPI für rnPolymerforschung) wurde der Einfluss unterschiedlicher BMP-2-Peptide auf die rnosteogene Differenzierung von hMSCs untersucht. Hierbei konnte gezeigt werden, dass die unterschiedlichen Peptide in keiner Konzentration und Kombination eine positive Wirkung auf die osteogene Differenzierung haben. rnIm Rahmen eines Kooperationsprojekts mit Kerstin Münnemann (MPI für rnPolymerforschung) konnte gezeigt werden, dass eine quantitative Bestimmung des rnzellulären Eisengehalts nach Inkubation mit SPIOs sowohl mit Hilfe von MRT, H1rn NMR als auch UV/VIS Messungen bis zu einem Detektionslimit von 100.000 Zellen /mL (bei einer Beladung von 10 pg Fe/Zelle) erfolgen kann.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Die vorliegende Dissertation untersucht Nanopartikel und Nanokapseln aus verschiedenen Materialien mit verschiedenen Modifikationen für einen zielgerichteten Medikamententransport (Drug Targeting). Obwohl bisher zahlreiche Nanopartikel und -kapseln synthetisiert wurden, besteht nach wie vor hinsichtlich der zellulären Verträglichkeit, Biokompatibilität und Aufnahme kein allumfassendes Verständnis. Mit Hilfe der in dieser Arbeit vorgestellten Untersuchungen und Ergebnissen soll ein Beitrag zur Schließung dieser Lücke geleistet werden.rnIm Rahmen der vorliegenden Dissertation wurde der Einfluss der Herstellungsmaterialien PS, PLLA, PMMA, Biomakromoleküle (BSA, DNA), ggf. stabilisiert durch HPMA-LMA-Copolymere und neu-synthetisierte Surfmere, der Formmodifikationen Streckung und Kristallisierung, der Oberflächenmodifikationen mittels verschiedener Tenside und PEG auf die zelluläre Aufnahme und Verträglichkeit hin untersucht.rnZusammenfassend lässt sich die Aussage treffen, dass zahlreiche Materialien zur Herstellung von Trägersystemen geeignet sind und sich als biokompatibel und nicht-zytotoxisch erwiesen haben, sich jedoch stark hinsichtlich der Aufnahmeeffizienz in verschiedene Zelllinien unterscheiden. rnIm ersten Abschnitt (Kapitel 5.1) wurden in der ersten und zweiten Untersuchung auf allgemeine Parameter, die die Aufnahme von Nanopartikeln beeinflussen, eingegangen. Hier wurde der Einfluss des Alters von PLLA-Partikeln auf die zelluläre Aufnahme und Toxizität untersucht. Es konnte gezeigt werden, dass mit zunehmender Materialalterung die zelluläre Aufnahme abnimmt. Eine Zytotoxizität konnte nicht gezeigt werden.rnWeiterhin wurde der Einfluss des FCS-Gehalts des Zell-Mediums auf die zelluläre Aufnahme von PMMA-Partikeln untersucht. Es konnte gezeigt werden, dass mit einer steigenden FCS-Konzentration eine Abnahme der zellulären Aufnahme von PMMA-Partikeln einhergeht. Die höchste zelluläre Aufnahme konnte bei einem FCS-Gehalt des Zellmediums von 0,05% verzeichnet werden. rnIm zweiten Abschnitt (Kapitel 5.2) wurde die Stabilisierung von Nanopartikeln mittels neusynthetisierter Tenside und deren Einfluss auf die Zelle-Nanopartikel-Interaktionen untersucht. Dazu wurde zum einen die Oberflächenfunktionalisierung von Nanopartikeln mit Hilfe neu-synthetisierter „Surfmere“ und deren Einfluss auf die zelluläre Aufnahme und Toxizität untersucht. Die hergestellten Surfmere bewirken gleichzeitig eine Stabilisierung und Funktionalisierung der Nanopartikeloberfläche mit Phosphonatgruppen. Hier wurden kovalente „Surfmer“ stabilisierte Nanopartikel mit Tensid- (SDP) stabilisierten Nanopartikeln verglichen. Zudem wurden dialysierte Nanopartikel mit nicht-dialysierten verglichen. Bezüglich der zellulären Aufnahme konnte für die mittels Dialyse gereinigten Nanopartikel eine gute Aufnahme ohne Unterschiede zwischen den kovalent und nicht-kovalent Phosphonat-funktionalisierten Partikeln beobachtet werden. Die ungereinigten, SDP-stabilisierte, nicht-kovalent gebundene Nanopartikel zeigten hingegen eine bis zu 30% stärkere Aufnahme in die HeLa-Zellen und hMSCs.rnWeiterhin der Einsatz von mit HPMA-LMA-Copolymeren stabilisierte Polystyrol- und PLLA-Partikel, die den Einsatz von Tensiden während des Miniemulsionsprozesses überflüssig machen, untersucht. Auch hier konnte keine Zytotoxizität nachgewiesen werden. Die Aufnahme in HeLa-Zellen scheint mehr von der Größe der Nanopartikel als vom verwendeten Material und in hMSCs mehr von den Oberflächeneigenschaften der Nanopartikel abzuhängen.rnIm dritten Abschnitt (Kapitel 5.3) wird auf die Möglichkeit der Formmodifikation von Polystyrol-Partikeln und deren Einfluss auf die Nanopartikel-Zelle-Interaktionen eingegangen. Es geht dabei um die Aufnahme und Zytotoxizität von verstreckten (elongierten) Polystyrol-Partikeln im Vergleich zu sphärischen Nanopartikeln, sowie die Aufnahme und Zytotoxizität von kristallinen Polystyrol-Partikeln in verschiedene Zelllinien. Bei den verstreckten Partikeln nimmt die Aufnahme-Effizienz in HeLa-Zellen und hMSCs mit zunehmender Verstreckung ab. Eine Zytotoxizität konnte für keinen der erwähnten Nanopartikel nachgewiesen werden. Bei den Polystyrol-Partikeln unterschiedlicher Taktizität zeigen die kristallierten Polystyrol-Partikel eine geringfügig besser Aufnahme-Rate als die nicht-kristallierten Polystyrol-Partikel. Dabei zeigen die nach dem Herstellungsprozess mittels der Lösemittelverdampfungstechnik der wässrigen Phase entnommenen Partikel eine bessere Aufnahme als die nach der Verdampfung des Chloroforms verfügbaren Partikel. Insgesamt konnte jedoch für alle Polystyrol-Partikel trotz der unterschiedlichen Taktizitäten nach der Aufnahme in HeLa-Zellen und hMSCs mittels Durchflusszytometrie hohe Fluoreszenz-Intensitäten verzeichnet werden. Setzt man hohe Fluoreszenz-Intensitäten bei in Zellen aufgenommenen Partikeln mit guten Aufnahmeraten gleich, sind die hier dargestellten Aufnahmeraten als sehr gut zu bezeichnen. rnAuf Nanosysteme mit einer reduzierten zellulären Aufnahme wird im letzten Abschnitt (Kapitel 5.4) eingegangen. Dabei wird zum einen die unterschiedliche Oberflächenmodifikation von Polystyrol-Partikeln mit dem Co-Monomer PEG-MA und den Tensiden SDS und Lutensol AT50 untersucht. Von PEG-MA wurden zudem verschiedene Molekulargewichte (Mn=300 g•mol-1 und Mn=2080 g•mol-1) und verschiedene Konzentrationen (1,5%, 5%, 10%) eingesetzt. Ein Teil der Partikel wurde mit SDS und der andere Teil mit Lutensol AT50 hergestellt. In einem weiteren Schritt wurde das jeweilig gegenteilige Tensid (statt SDS Lutensol AT50 und umgekehrt) eingesetzt, um zu überprüfen, ob sich der zuvor beobachtete Effekt umkehren lässt. Anschließend wurde ein erst mit SDS stabilisierter Nanopartikel (BR01) mit verschiedenen Lutensol AT50-Anteilen (5%, 10%, 25%, 50%, 100%) redispergiert. Die effizienteste Aufnahme zeigte der unmodifizierte, mit SDS stabilisierte Nanopartikel BR01, die niedrigste der ebenfalls unmodifizierte, mit Lutensol AT50 stabilisierte Nanopartikel BR02. Eine steigende Konzentration des PEG-MA Mn=300 g•mol-1 hemmt die Aufnahme von mit SDS stabilisierten Partikeln konstant. Für PEG-MA Mn=2080 g•mol-1 konnte hingegen kein Einfluss nachgewiesen werden. Für die mit Lutensol AT50 stabilisierten Partikel konnte kein Einfluss von PEG-MA nachgewiesen werden. Daraus resultiert, dass der Einsatz von physikalisch adsorbiertem Lutensol AT50 die zelluläre Aufnahme effektiver hemmt als der Einsatz von kovalent gebundenem PEG-MA unterschiedlicher Kettenlänge.rnDer Einsatz von mit Biomakromolekülen hergestellten Nanokapseln, die mit zwei verschiedenen Tensiden (SDS und Lutensol AT50) stabilisiert wurden, wurde im Weiteren näher untersucht. Bei den mit SDS stabilisierten Kapseln erwiesen sich die mit ssDNA hergestellten Kapseln BN-54 und BN-55 als leicht toxisch für die HeLa-Zellen. Dagegen sind alle eingesetzten, mit Lutensol AT50 redispergierten Nanokapseln sowohl für HeLa-Zellen als auch für hMSCs zytotoxisch. Hier ist die toxische Wirkung auf das nicht-ionische Tensid Lutensol AT50 zurückzuführen. Eine zelluläre Aufnahme konnte für keine mit Biomakromolekülen hergestellten Nanokapsel nachgewiesen werden.rnDen Abschluss der Untersuchungen bildet die vergleichende Analyse der in dieser Arbeit mit dem Fluoreszenzfarbstoff PMI versehenen Partikeln hinsichtlich deren Aufnahme in HeLa-Zellen und hMSCs und deren zytotoxische Auswirkungen. In der vergleichenden Analyse werden die zuvor vorgestellten Ergebnisse für PMI-Partikeln nochmal im Kontext betrachtet. Dabei erwies sich sowohl für die HeLa-Zellen als auch für die hMSCs, dass die meisten Partikel eine geringe bis keine zelluläre Aufnahme zeigen. Eine gute Aufnahme konnte nur für wenige Nanopartikel (vor allem für die kristallinen Nanopartikel) verzeichnet werden. Eine Korrelation zwischen der Aufnahmeeffizienz und der Zytotoxizität konnte nicht nachgewiesen werden. rn

Relevância:

60.00% 60.00%

Publicador:

Resumo:

As a part of the respiratory tissue barrier, lung epithelial cells play an important role against the penetration of the body by inhaled particulate foreign materials. In most cell culture models, which are designed to study particle-cell interactions, the cells are immersed in medium. This does not reflect the physiological condition of lung epithelial cells which are exposed to air, separated from it only by a very thin liquid lining layer with a surfactant film at the air-liquid interface. In this study, A549 epithelial cells were grown on microporous membranes in a two chamber system. After the formation of a confluent monolayer the cells were exposed to air. The morphology of the cells and the expression of tight junction proteins were studied with confocal laser scanning and transmission electron microscopy. Air-exposed cells maintained monolayer structure for 2 days, expressed tight junctions and developed transepithelial electrical resistance. Surfactant was produced and released at the apical side of the air-exposed epithelial cells. In order to study particle-cell interactions fluorescent 1 microm polystyrene particles were sprayed over the epithelial surface. After 4 h, 8.8% of particles were found inside the epithelium. This fraction increased to 38% after 24 h. During all observations, particles were always found in the cells but never between them. In this study, we present an in vitro model of the respiratory tract wall consisting of air-exposed lung epithelial cells covered by a liquid lining layer with a surfactant film to study particle-cell interactions.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Phagocytosis of fine particles (1 mum) by macrophages is a ligand-receptor-mediated, actin-based process, whereas the entering of smaller particles (polystyrene particles showed that virosomes and particles penetrated cells even in the presence of cytochalasin D, a drug inhibiting actin-based phagocytosis. The charge of the virosomes and particles did not influence their penetration. Also, different inhibitors of endocytotic pathways did not prevent the particles and virosomes from penetrating into the cells. Additionally, to study the ability of virosomes to overcome the epithelial airway barrier, a triple cell co-culture model composed of epithelial cells, monocyte-derived macrophages and dendritic cells of the respiratory tract was used. We found virosomes and polystyrene particles in both populations of antigen-presenting cells, monocyte-derived macrophages, and dendritic cells, in the latter even if they were not directly exposed. In conclusion, virosomes are readily taken up by monocyte-derived macrophages, both by conventional phagocytosis and by actin-independent mechanisms. Further, they can penetrate the airway barrier and reach resident dendritic cells. Therefore, virosomes are promising vaccine candidates.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A unique hand-held gene gun is employed for ballistically delivering biomolecules to key cells in the skin and mucosa in the treatment of the major diseases. One of these types of devices, called the Contoured Shock Tube (CST), delivers powdered micro-particles to the skin with a narrow and highly controllable velocity distribution and a nominally uniform spatial distribution. In this paper, we apply a numerical approach to gain new insights in to the behavior of the CST prototype device. The drag correlations proposed by Henderson (1976), Igra and Takayama (1993) and Kurian and Das (1997) were applied to predict the micro-particle transport in a numerically simulated gas flow. Simulated pressure histories agree well with the corresponding static and Pitot pressure measurements, validating the CFD approach. The calculated velocity distributions show a good agreement, with the best prediction from Igra & Takayama correlation (maximum discrepancy of 5%). Key features of the gas dynamics and gas-particle interaction are discussed. Statistic analyses show a tight free-jet particle velocity distribution is achieved (570 +/- 14.7 m/s) for polystyrene particles (39 +/- 1 mu m), representative of a drug payload.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The present work focuses on the modification of the commonly used thermoplastics, polypropylene and polystyrene using nanosilica preparcd from a cheap source of sodium silicate. Melt compounding technique has been used for nanocomposite preparation as it is simple and suited to injection moulding. Nanosilica in a polymer matrix provide significant enhancement in strength, stiffness and impact strength. Incorporation of silica particles in a polymer also improves its thennal stability. To achieve better dispersion of fillers in polymer matrices the mixing was done at different shear rates. The enhancement in material properties indicates that at higher shear rates there is greater interaction between particles and the matrix and it depends on filler concentration and type of polymer used. N anosilica is a useful filler in thennoplastic polymers and has been applied in automotive applications, electronic appliances and consumer goods.This thesis is divided into six chapters. General introduction to the topic is described in chapter 1. Salient features of polymer nanocomposites, their synthesis, properties and applications are presented. A review of relevant literature and the scope and objectives are also mentioned in this chapter.The materials used and the vanous experimental method and techniques employed in the study are described in chapter 2. Preparation of nanocomposites by melt blending using Thenno Haake Rheocord, preparation of samples, evaluation of mechanical and thennal properties using UTM, Impact testing and characterization using DMA, TGA and DSC and morphology by SEM are described.The preparation of nanosilica from a laboratory scale to a pilot plant scale is described in chapter 3. Generation of surface modified silica, evaluation of kinetic parameters of the synthesis reaction, scale up of the reactor and modeling of the reactor are also dealt with in this chapter.The modification of the commodity thennoplastic, Polypropylene using nanosilica is described in chapter 4. Preparation of PP/silica nanocomposites, evaluation of mechanical properties, thermal and crystallization characteristics, water absorption and ageing resistance studies are also presented.The modification of Polystyrene using synthesized nanosilica IS described in chapter 5. The method of preparation of PS/silica nanocomposites, evaluation of mechanical properties (static and dynamic), thermal properties melt flow characteristics using Haake Rheocord, water absorption and ageing resistance of these nanocomposites are studied.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Magnetic nanocomposites containing iron oxide particles embedded in a polymer matrix have been synthesized using the method of ion exchange. They have been characterized by using low temperature and room temperature magnetic measurements and Mo¨ ssbauer spectroscopy. The iron content in these samples has also been determined. The results have been analysed and explained. The physical and chemical properties of these nanocomposite materials are different from those of the bulk. Some of the unique properties of these materials find application in information storage, color imaging, ferrofluids and magnetic refrigeration

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The past decade has seen significant increases in combustion-generated ambient particles, which contain a nanosized fraction (less than 100 nm), and even greater increases have occurred in engineered nanoparticles (NPs) propelled by the booming nanotechnology industry. Although inhalation of these particulates has become a public health concern, human health effects and mechanisms of action for NPs are not well understood. Focusing on the human airway smooth muscle cell, here we show that the cellular mechanical function is altered by particulate exposure in a manner that is dependent upon particle material, size and dose. We used Alamar Blue assay to measure cell viability and optical magnetic twisting cytometry to measure cell stiffness and agonist-induced contractility. The eight particle species fell into four categories, based on their respective effect on cell viability and on mechanical function. Cell viability was impaired and cell contractility was decreased by (i) zinc oxide (40-100 nm and less than 44 mu m) and copper(II) oxide (less than 50 nm); cell contractility was decreased by (ii) fluorescent polystyrene spheres (40 nm), increased by (iii) welding fumes and unchanged by (iv) diesel exhaust particles, titanium dioxide (25 nm) and copper(II) oxide (less than 5 mu m), although in none of these cases was cell viability impaired. Treatment with hydrogen peroxide up to 500 mu M did not alter viability or cell mechanics, suggesting that the particle effects are unlikely to be mediated by particle-generated reactive oxygen species. Our results highlight the susceptibility of cellular mechanical function to particulate exposures and suggest that direct exposure of the airway smooth muscle cells to particulates may initiate or aggravate respiratory diseases.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The interaction between giant bacteriophage DNA and cationic biomimetic particles was characterized from sizing by dynamic light-scattering, zeta-potential analysis, turbidimetry, determination of colloid stability, visualization from atomic force microscopy (AFM), and determination of cytotoxicity against E. coli from colony forming unities counting. First, polystyrene sulfate (PSS) particles with different sizes were covered by a dioctadecyldimethylammonium bromide (DODAB) bilayer yielding the so-called cationic biomimetic particles (PSS/DODAB). These cationic particles are highly organized, present a narrow size distribution and were obtained over a range of particle sizes. Thereafter, upon adding lambda, T5 or T2-DNA to PSS/DODAB particles, supramolecular assemblies PSS/DODAB/DNA were obtained and characterized over a range of DNA concentrations and particle sizes (80-700 nm). Over the low DNA concentration range, PSS/DODAB/DNA assemblies were cationic, colloidally stable with moderate polydispersity and highly cytotoxic against E. coli. From DNA concentration corresponding to charge neutralization, neutral or anionic supramolecular assemblies PSS/DODAB/DNA exhibited low colloid stability, high polydispersity and moderate cytotoxicity. Some nucleosome mimetic assemblies were observed by AFM at charge neutralization (zeta-potential equal to zero).

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)