Building monotonicity-preserving fuzzy inference models with optimization-based similarity reasoning and a monotonicity index

In this paper, a novel approach to building a Fuzzy Inference System (FIS) that preserves the monotonicity property is proposed. A new fuzzy re-labeling technique to re-label the consequents of fuzzy rules in the database (before the Similarity Reasoning process) and a monotonicity index for use in FIS modeling are introduced. The proposed approach is able to overcome several restrictions in our previous work that uses mathematical conditions in building monotonicity-preserving FIS models. Here, we show that the proposed approach is applicable to different FIS models, which include the zero-order Sugeno FIS and Mamdani models. Besides, the proposed approach can be extended to undertake problems related to the local monotonicity property of FIS models. A number of examples to demonstrate the usefulness of the proposed approach are presented. The results indicate the usefulness of the proposed approach in constructing monotonicity-preserving FIS models.

A non-linear programming-based similarity reasoning scheme for modelling of monotonicity-preserving multi-input fuzzy inference systems

In this paper, the zero-order Sugeno Fuzzy Inference System (FIS) that preserves the monotonicity property is studied. The sufficient conditions for the zero-order Sugeno FIS model to satisfy the monotonicity property are exploited as a set of useful governing equations to facilitate the FIS modelling process. The sufficient conditions suggest a fuzzy partition (at the rule antecedent part) and a monotonically-ordered rule base (at the rule consequent part) that can preserve the monotonicity property. The investigation focuses on the use of two Similarity Reasoning (SR)-based methods, i.e., Analogical Reasoning (AR) and Fuzzy Rule Interpolation (FRI), to deduce each conclusion separately. It is shown that AR and FRI may not be a direct solution to modelling of a multi-input FIS model that fulfils the monotonicity property, owing to the difficulty in getting a set of monotonically-ordered conclusions. As such, a Non-Linear Programming (NLP)-based SR scheme for constructing a monotonicity-preserving multi-input FIS model is proposed. In the proposed scheme, AR or FRI is first used to predict the rule conclusion of each observation. Then, a search algorithm is adopted to look for a set of consequents with minimized root means square errors as compared with the predicted conclusions. A constraint imposed by the sufficient conditions is also included in the search process. Applicability of the proposed scheme to undertaking fuzzy Failure Mode and Effect Analysis (FMEA) tasks is demonstrated. The results indicate that the proposed NLP-based SR scheme is useful for preserving the monotonicity property for building a multi-input FIS model with an incomplete rule base.

An evolutionary-based similarity reasoning scheme for monotonic multi-input fuzzy inference systems

In this paper, an Evolutionary-based Similarity Reasoning (ESR) scheme for preserving the monotonicity property of the multi-input Fuzzy Inference System (FIS) is proposed. Similarity reasoning (SR) is a useful solution for undertaking the incomplete rule base problem in FIS modeling. However, SR may not be a direct solution to designing monotonic multi-input FIS models, owing to the difficulty in getting a set of monotonically-ordered conclusions. The proposed ESR scheme, which is a synthesis of evolutionary computing, sufficient conditions, and SR, provides a useful solution to modeling and preserving the monotonicity property of multi-input FIS models. A case study on Failure Mode and Effect Analysis (FMEA) is used to demonstrate the effectiveness of the proposed ESR scheme in undertaking real world problems that require the monotonicity property of FIS models.

A new framework with similarity reasoning and monotone fuzzy rule relabeling for fuzzy inference systems

A complete and monotonically-ordered fuzzy rule base is necessary to maintain the monotonicity property of a Fuzzy Inference System (FIS). In this paper, a new monotone fuzzy rule relabeling technique to relabel a non-monotone fuzzy rule base provided by domain experts is proposed. Even though the Genetic Algorithm (GA)-based monotone fuzzy rule relabeling technique has been investigated in our previous work [7], the optimality of the approach could not be guaranteed. The new fuzzy rule relabeling technique adopts a simple brute force search, and it can produce an optimal result. We also formulate a new two-stage framework that encompasses a GA-based rule selection scheme, the optimization based-Similarity Reasoning (SR) scheme, and the proposed monotone fuzzy rule relabeling technique for preserving the monotonicity property of the FIS model. Applicability of the two-stage framework to a real world problem, i.e., failure mode and effect analysis, is further demonstrated. The results clearly demonstrate the usefulness of the proposed framework.

A new online updating framework for constructing monotonicity-preserving fuzzy inference systems

In this paper, a new online updating framework for constructing monotonicity-preserving Fuzzy Inference Systems (FISs) is proposed. The framework encompasses an optimization-based Similarity Reasoning (SR) scheme and a new monotone fuzzy rule relabeling technique. A complete and monotonically-ordered fuzzy rule base is necessary to maintain the monotonicity property of an FIS model. The proposed framework attempts to allow a monotonicity-preserving FIS model to be constructed when the fuzzy rules are incomplete and not monotonically-ordered. An online feature is introduced to allow the FIS model to be updated from time to time. We further investigate three useful measures, i.e., the belief, plausibility, and evidential mass measures, which are inspired from the Dempster- Shafer theory of evidence, to analyze the proposed framework and to give an insight for the inferred outcomes from the FIS model.

Building fuzzy inference systems with similarity reasoning : NSGAII-based fuzzy rule selection and evidential functions

In our previous investigations, two Similarity Reasoning (SR)-based frameworks for tackling real-world problems have been proposed. In both frameworks, SR is used to deduce unknown fuzzy rules based on similarity of the given and unknown fuzzy rules for building a Fuzzy Inference System (FIS). In this paper, we further extend our previous findings by developing (1) a multi-objective evolutionary model for fuzzy rule selection; and (2) an evidential function to facilitate the use of both frameworks. The Non-Dominated Sorting Genetic Algorithms-p (NSGA-p) is adopted for fuzzy rule selection, in accordance with the Pareto optimal criterion. Besides that, two new evidential functions are developed, whereby given fuzzy rules are considered as evidence. Simulated and benchmark examples are included to demonstrate the applicability of these suggestions. Positive results were obtained.

Semi-Supervised OWA Aggregation for Link-Based Similarity Evaluation and Alias Detection

T.Boongoen and Q. Shen. Semi-Supervised OWA Aggregation for Link-Based Similarity Evaluation and Alias Detection. Proceedings of the 18th International Conference on Fuzzy Systems (FUZZ-IEEE'09), pp. 288-293, 2009. Sponsorship: EPSRC

Heavy truck suspension optimization based on modified skyhook damping control

This paper presents a multi-objective optimization strategy for heavy truck suspension systems based on modified skyhook damping (MSD) control, which improves ride comfort and road-friendliness simultaneously. A four-axle heavy truck-road coupling system model was established using functional virtual prototype technology; the model was then validated through a ride comfort test. As the mechanical properties and time lag of dampers were taken into account, MSD control of active and semi-active dampers was implemented using Matlab/Simulink. Through co-simulations with Adams and Matlab, the effects of passive, semi-active MSD control, and active MSD control were analyzed and compared; thus, control parameters which afforded the best integrated performance were chosen. Simulation results indicated that MSD control improves a truck’s ride comfort and roadfriendliness, while the semi-active MSD control damper obtains road-friendliness comparable to the active MSD control damper.

An optimization-based algorithm for shunt active filter under distorted supply voltages

When the supply voltages are balanced and sinusoidal, load compensation can give both unity power factor (UPF) and perfect harmonic cancellation (PHC) source currents. But under distorted supply voltages, achieving both UPF and PHC currents are not possible and contradictory to each other. Hence there should be an optimal performance between these two important compensation goals. This paper presents an optimal control algorithm for load compensation under unbalanced and distorted supply voltages. In this algorithm source currents are compensated for reactive, imbalance components and harmonic distortions set by the limits. By satisfying the harmonic distortion limits and power balance, this algorithm gives the source currents which will provide the maximum achievable power factor. The detailed simulation results using MATLAB are presented to support the performance of the proposed optimal control algorithm.

A survey: Particle Swarm Optimization based algorithms to solve premature convergence problem

Particle Swarm Optimization (PSO) is a biologically inspired computational search and optimization method based on the social behaviors of birds flocking or fish schooling. Although, PSO is represented in solving many well-known numerical test problems, but it suffers from the premature convergence. A number of basic variations have been developed due to solve the premature convergence problem and improve quality of solution founded by the PSO. This study presents a comprehensive survey of the various PSO-based algorithms. As part of this survey, the authors have included a classification of the approaches and they have identify the main features of each proposal. In the last part of the study, some of the topics within this field that are considered as promising areas of future research are listed.

Unified Vdd Vth Optimization Based DVFM Controller for a Logic Block

In this paper analytical expressions for optimal Vdd and Vth to minimize energy for a given speed constraint are derived. These expressions are based on the EKV model for transistors and are valid in both strong inversion and sub threshold regions. The effect of gate leakage on the optimal Vdd and Vth is analyzed. A new gradient based algorithm for controlling Vdd and Vth based on delay and power monitoring results is proposed. A Vdd-Vth controller which uses the algorithm to dynamically control the supply and threshold voltage of a representative logic block (sum of absolute difference computation of an MPEG decoder) is designed. Simulation results using 65 nm predictive technology models are given.

Topology optimization-based design of a compliant aircraft compliant aircraft wing for morphing leading and trailing edges

In this paper, we present a methodology for designing a compliant aircraft wing, which can morph from a given airfoil shape to another given shape under the actuation of internal forces and can offer sufficient stiffness in both configurations under the respective aerodynamic loads. The least square error in displacements, Fourier descriptors, geometric moments, and moment invariants are studied to compare candidate shapes and to pose the optimization problem. Their relative merits and demerits are discussed in this paper. The `frame finite element ground structure' approach is used for topology optimization and the resulting solutions are converted to continuum solutions. The introduction of a notch-like feature is the key to the success of the design. It not only gives a good match for the target morphed shape for the leading and trailing edges but also minimizes the extension of the flexible skin that is to be put on the airfoil frame. Even though linear small-displacement elastic analysis is used in optimization, the obtained designs are analysed for large displacement behavior. The methodology developed here is not restricted to aircraft wings; it can be used to solve any shape-morphing requirement in flexible structures and compliant mechanisms.

Cooperative Particle Swarm Optimization Based Receiver for Large-Dimension MIMO-ZPSC Systems

In this paper, we propose a cooperative particle swarm optimization (CPSO) based channel estimation/equalization scheme for multiple-input multiple-output zero-padded single-carrier (MIMO-ZPSC) systems with large dimensions in frequency selective channels. We estimate the channel state information at the receiver in time domain using a PSO based algorithm during training phase. Using the estimated channel, we perform information symbol detection in the frequency domain using FFT based processing. For this detection, we use a low complexity OLA (OverLap Add) likelihood ascent search equalizer which uses minimum mean square (MMSE) equalizer solution as the initial solution. Multiple iterations between channel estimation and data detection are carried out which significantly improves the mean square error and bit error rate performance of the receiver.

System error removal and structure optimization based on Fizeau interferometer

In the process of interferometric testing, the measurement result is influenced by the system structure, which reduces the measurement accuracy. To obtain an accurate test result, it is necessary to analyze the test system, and build the relationship between the measurement error and the system parameters. In this paper, the influences of the system elements which include the collimated lens and the standard surface on the interferometric testing are analyzed, the expressions of phase distribution and wavefront error on the detector are obtained, the method to remove some element errors is introduced, and the optimization structure relationships are given. (C) 2006 Elsevier GmbH. All rights reserved.