Refractive index measurement by the moire technique

A simple moire method for the direct measurement of refractive indices is presented. The change of magnification and/or distortion of the image of a linear grating when viewed through a refractive index field is amplified by means of moire fringes and is measured directly. Relations between the index of refraction and fringe spacing are derived and have been verified experimentally.

Novel approach to estimate fringe order in Moire profilometry

A novel approach to estimate fringe order in Moire topography is proposed. Along with the light source used to create shadow of the grating on the object (as in conventional moire), proposed method uses a second light source which illuminates the object with color bands from the side. Width of each colored band is set to match that height which leads to a 2 pi phase shift in moire fringes. This facilitates one to rule the object with colored bands, which can be used to estimate fringe order using a color camera with relatively low spatial resolution with out any compromise in height sensitivity. Current proposal facilitates one to extract 3D profile of objects with surface discontinuities. It also deals with the possible usage of moire topography (when combined with the proposed method) in extracting 3D surface profile of many objects with height discontinuities using a single 2D image. Present article deals with theory and simulations of this novel side illumination based approach.

Measurement of in-plane and out-of-plane displacements and strains using digital holographic moire

The paper proposes a non-destructive method for simultaneous measurement of in-plane and out-of-plane displacements and strains undergone by a deformed specimen from a single moire fringe pattern obtained on the specimen in a dual beam digital holographic interferometry setup. The moire fringe pattern encodes multiple interference phases which carry the information on multidimensional deformation. The interference field is segmented in each column and is modeled as multicomponent quadratic/cubic frequency-modulated signal in each segment. Subsequently, the product form of modified cubic phase function is used for accurate estimation of phase parameters. The estimated phase parameters are further utilized for direct estimation of the unwrapped interference phases and phase derivatives. The simulation and experimental results are provided to validate the effectiveness of the proposed method.

Thermal Properties Measurement of Micro-Electromechanical System Sensors by Digital Moire Method

The thermal properties of a micro-electromechanical system sensor were analysed by a novel digital moire method. A double-layer micro-cantilever sensor (60 mu m long, 10 mu m width and 2 mu dm thick) was prepared by focused ion beam milling. A grating with frequency of 5000 lines mm- I was etched on the cantilever. The sensor was placed into a scanning electron microscope system with a high temperature device. The observation and recording of the thermal deformation of the grating were realised in real-time as the temperature rose from room temperature to 300 degrees C at intervals of 50 degrees C. Digital moire was generated by interference of the deformed grating and a digital virtual grating. The thermal properties including strain distribution of the sensor and the linear expansion coefficient of polysilicon were accurately measured by the phase-shifted moire patterns.

Study of the surface structure of butterfly wings using the scanning electron microscopic moire method

Scanning electron microscopic (SEM) moire method was used to study the surface structure of three kinds of butterfly wings: Papilio maackii Menetries, Euploea midamus (Linnaeus), and Stichophthalma how-qua (Westwood). Gratings composed of curves with different orientations were found on scales. The planar characteristics of gratings and some other planar features of the surface structure of these wings were revealed, respectively, in terms of virtual strain. Experimental results demonstrate that SEM moire method is a simple, nonlocal, economical, effective technique for determining which grating exists on one whole scale, measuring the dimension and the whole planar structural character of the grating on each scale, as well as characterizing the relationship between gratings on different scales of each butterfly wing. Thus, the SEM moire method is a useful tool to assist with characterizing the structure of butterfly wings and explaining their excellent properties. (c) 2007 Optical Society of America.

Generation of millimeter-wave in optical pulse carrier by using an apodized Moire fiber grating

A novel scheme is proposed to transform a Gaussian pulse to a millimeter-wave frequency modulation pulse by using an apodized Moire fiber Bragg grating in radio-over-fiber system. The relation between the input and output pulses is analyzed theoretically by Fourier transformation method and the requirements for the proposed fiber grating are presented. An apodized Moire fiber Bragg grating is designed and its characteristics are studied. It is shown that the proposed device is feasible, and the new scheme is believed to be an effective solution for the generation of millimeter-wave sub-carrier in future radio-over-fiber systems. (c) 2006 Elsevier B.V. All rights reserved.

Technique for diagnosing x-ray laser beam quality by use of the moire signal

We present what we believe is a novel technique based on the moire effect for fully diagnosing the beam quality of an x-ray laser. Using Fresnel diffraction theory, we investigated the intensity profile of the moire pattern when a general paraxial beam illuminates a pair of Ronchi gratings in the quasi-far field. Two formulas were derived to determine the beam quality factor M-2 and the effective radius of curvature R-e from the moire pattern. On the basis of the results, the far-field divergence, the waist location, and the radius can be calculated further. Finally, we verified the approach by use of numerical simulation. (C) 1999 Optical Society of America [S0740-3232(99)01502-1].

A novel polarization modulator for a Moire system with grating imaging

A polarization modulator based on splitting with a Savart plate and rotation of an analyzer for a moire system with grating imaging is presented, and its modulation principle is analyzed. The polarization modulator is simple and achromatic. It is composed of a polarizer, a Savart plate, and an analyzer. The polarizer and the Savart plate are placed in front of the index grating to split the image of the scale grating in the moire system. The analyzer is placed behind the grating and rotated to realize the modulation of the moire signal. The analyzer can be rotated either continually with high speed or step by step with low speed to form different modulation modes. The polarization modulator makes the moire system insensitive to the change of initial intensity. In experiments, we verified the usefulness of the polarization modulator.

Proton moire fringes for diagnosing electromagnetic fields in opaque materials and plasmas

High contrast proton moire fringes have been obtained in a laser-produced proton beam. Moire u fringes with modulation of 20%-30% were observed in protons with energies in the range of 4 - 7 MeV. Monte Carlo simulations with simple test fields showed that shifts in the moire u fringes can be used to give quantitative information on the strength of transient electromagnetic fields inside plasmas and materials that are opaque to conventional probing methods. (C) 2003 American Institute of Physics.

Localisation du langage et de la mémoire verbale en magnétoencéphalographie

Dans le cadre de l’évaluation pré-chirurgicale de patients épileptiques, il est impératif de déterminer la spécialisation hémisphérique du langage, ainsi que de localiser les aires du langage au sein de cet hémisphère. De nouvelles méthodes d’évaluation non- invasives doivent être mises au point afin de diminuer les risques associés aux méthodes plus invasives telles que le test à l’amobarbital intracarotidien (TAI). L’objectif principal de cette thèse est donc de développer un protocole d’évaluation pré-chirurgicale alternatif et non-invasif à l’aide de la magnétoencéphalographie (MEG) pour la latéralisation et la localisation du langage, incluant la mémoire verbale qui serait éventuellement accessible à une population pédiatrique francophone épileptique. L’article 1 présente une recension de la littérature résumant les différentes études en MEG ayant pour objectif l’évaluation pré-chirurgicale du langage. Trente-sept articles en MEG ont été analysés pour déterminer quelles tâches permettaient d’obtenir les meilleurs résultats de latéralisation intrahémisphérique et de localisation du langage pour l’évaluation du langage réceptif et expressif chez des sujets neurologiquement sains et épileptiques. Parmi les tests retenus, l’épreuve de reconnaissance de mots permet d’évaluer le langage réceptif et la mémoire verbale, tandis que des épreuves de fluence verbale telles que la génération de verbes permettent d’évaluer le langage expressif de façon à obtenir de très bons résultats. L’article 2 a permis de valider un protocole auprès de sujets neurologiquement sains à l’aide des épreuves identifiées dans l’article 1. Le protocole utilisé comprend une tâche de langage réceptif et de mémoire verbale (une épreuve de reconnaissance de mots) et une tâche de langage expressif (une épreuve de fluence verbale). Suite à la validation du protocole à l’aide d’analyses par composantes principales, les épreuves ont été administrées à un groupe de patients épileptiques. Les index de latéralité et les analyses de sources i révèlent que la MEG permet de localiser et de latéraliser les fonctions langagières et pourrait donc être utilisée comme méthode d'évaluation du langage lors de l'évaluation pré- chirurgicale auprès de patients épileptiques. Toutefois, alors que l’épreuve de mémoire verbale a permis d’obtenir les meilleurs résultats auprès de l’ensemble des participants, l’épreuve de fluence verbale n’a fourni des informations supplémentaires que chez un seul patient et chez aucun participant neurologiquement sain. En résumé, les deux articles de cette thèse démontrent le potentiel clinique de la MEG pour l’évaluation pré-chirurgicale de patients souffrant d’une épilepsie réfractaire.

L'idéographie : mémoire sur la possibilité et la facilité de former une écriture générale au moyen de laquelle tous les peuples puissent s'entendre mutuellement sans que les uns connaissent la langue des autres /

"Extrait du vocabulaire français-idéographique et idéographique-français": 14 p. (3rd group).

Mémoire sur les moyens d'améliorer en France. La condition des Laboureurs, des journaliers, des hommes de peine vivans dans les campagnes, & celle de leurs femmes & de leurs enfans.

Mode of access: Internet.

Mémoire sur les inventions de Philibert Charmy, marchand tireur, écacheur & fileur d'or à Lyon, relatives à la perfection des traits & des filés : avec des gravures pour l'explication des machines anciennes & nouvelles.

Signatures: A-C⁴.