986 resultados para mini tomato
Resumo:
The objective of this study was to evaluate production of Sweet Grape mini tomato (Lycopersicum esculentum Mill.) using culture substrates and nutrient solution sewage effluent, applied by drip irrigation (fertigation). The experiment was conducted at the University of Goiás State (UEG-UnUCET), from June to November 2011 in Anápolis-GO, Brazil. The experimental design was a 2 x 3 factorial arrangement in a randomized complete block design with four repetitions. The plots were made by combining two nutrient solutions, effluent supplemented with mineral fertilizers (EcS); conventional nutrient solution (SnC); in addition three cultivation substrates: 60% of fine sand washed + 40% substrate composed by 20% coconut fiber plus 80% pine bark (S1); 20% coconut fiber and 80% pine bark (S2) and natural coconut fiber (S3). Sewage effluent were determined nitrate, calcium, potassium, manganese, total phosphate, total iron, magnesium, chloride, sulphate, boron, zinc and molybdenum. We evaluated average mass and average number of fruits per bunch, total fruit and total yield per plant. Statistical difference absence among tested solutions indicates sewage effluent can be used as an alternative source of nutrients in growing mini tomatoes in hydroponics.
Resumo:
In this context, the objective of this work was to evaluate the performance of mini tomato cultivars of determinate growth habit, in two crop seasons in the conditions of the Sub-Mid São Francisco Valley, Brazil.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA
Resumo:
The study was conducted to evaluate six K:Ca:Mg ratios for production of two cultivars of mini tomato grown in substrate, in a greenhouse, during two growing seasons. The experimental design was randomized blocks with four replications and twelve treatments using both cultivars of mini tomato (Sweet Million and Sweet Grape) and six K:Ca:Mg ratios (4:3:1, 6:3:1, 6:4.5:1, 2.7:3:1, 2.7:2:1, 4:2:1) in nutrient solutions. In both experiments, nutrient solutions with the highest concentrations of Mg, (75 mg L-1) and the lowest concentrations of Ca, (150 mg L-1) led to the highest concentrations of those nutrients in plant dry matter. The Sweet Million cultivar had higher yield (1.69 kg plant-1 and 1.52 kg plant-1), number of fruits per plant (227 and 236), and water use efficiency (29.1 kg m-3 and 25.3 kg m-3). However, the Sweet Grape cultivar had fruits of higher mean weight (9.0 g and 8.8 g) and macronutrient content in the leaves. In both crop cycles, the different K:Ca:Mg ratios affected only the macronutrient contents of the mini tomato plants grown in substrate, with no effect on yield and water use efficiency. The first crop cycle showed the highest N, K, Ca and S content.
Resumo:
ABSTRACT This paper aims at evaluating the shelf life of mini tomatoes (Lycopersicum esculentum Mill.) cultivar ‘Sweet Grape’, grown in hydroponics, and stored under environmental and refrigerated conditions inside different packages. We adopted a completely randomized design, in which treatments were combinations of storage conditions: environment (e) and refrigerated (r) with packaging: polyvinyl chloride film (PVC); low-density polyethylene (LDPE); biofilm of tomato fruit of Solanum lycocarpum A.St.-Hil (lobeira) (TFB); cassava starch biofilm (CSB); carnauba wax (Copernicia prunifera) (CW), and without packaging - control (C). Physicochemical and sensory tests were carried out at the beginning (day zero), and at 8, 19, and 33 days of storage (DS). Fruit stored inside PVCr, LDPEe, LDPEr, and CWr had an acceptable shelf life of 33 days. The use of cassava and tomato starches were not effective in controlling fruit fresh weight loss. ‘Sweet Grape’ tomato postharvest conservation was enhanced under refrigerated conditions. The sensory evaluation results revealed that CWr treatment most pleased appraisers, while PCV had the highest rejection rate.
Resumo:
Pós-graduação em Agronomia (Horticultura) - FCA
Resumo:
Tomatoes are among the most cultivated and used vegetables in the world. They are very succeptible to post harvest losses due to high perishability, therefore the use of postharvest treatments may contribute to conservation of this fruit, however the treatments might affect significantly physico-chemical, sensory and nutritional characteristics of tomatoes. Given the perishability of tomato and the economic importance of small tomato fruits, the purpose of the present study was to determine the effect of gamma radiation, carnauba coating and 1-MCP treatments on tomato fruit quality during storage. The study may be divided into two parts. In the first, mini tomatoes cv. Sweet Grape were harvested at breaker stage, divided into 4 grous and treated with gamma radiation (0.6 kGy), carnauba coating (1 L 1000 kg-1) and 1-MCP (500 nL L-1) and then stored at 25±2°C for 30 days with a control group of tomatoes. In the seconnd part, tomatoes harvested at light-red stage were submitted to the same treatments and storage period. Every 6 days tomatoes were evaluated for color modifications, fruit firmness, souble and total pectin (only for light-red tomatoes), mass loss, titratable acidity (TA), soluble solids (SS), SS/TA ratio, carotenoids profile, formation of lycopene isomers, total phenolic compounds, ascorbic acid and antioxidant capacity. For tomatoes harvested at breaker stage and submitted to the treatments the results showed mass loss was delaying mainly by carnauba wax, and to a lesser extend by 1-MCP. Fruit firmness were better retained for 1-MCP treated fruits and carnauba treatment showed a transient effect in preserving fruit firmness. SS/TA of tomatoes treated with gamma radiation and carnauba presented no differences from control values, and were lower with the application of 1-MCP. Color was negatively affected by 1-MCP and earlier changed (6th day) when gamma radiation was applied. In relation to bioactive compounds of tomatoes harvest at breaker stage, results indicated gamma radiation and 1-MCP decreased the final content of lycopene and produced more (Z)-isomers of lycopene. Gamma radiation also induced a decreased in ?-carotene and an increased in phenolic compounds by the end of storage period. 1-MCP treatment promoted a slow down increase in ascorbic acid content during storage. Antioxidant capacity of the hydrophilic fraction was not dramatically affected by treatments and the lipophilic fraction was lower, especially for 1-MCP fruits. In addition, contents of ?-carotene, lycopene, (Z)-isomers of lycopene, ascorbic acid and antioxidant capacity increased during the period of storage while contents of lutein and phenolic compounds tended to decrease. Regarding tomatoes harvest at light-red stage, the most effective treatments for delaying fruit firmness and mass loss was carnauba and 1-MCP, while gamma radiation was the treatment with higher mass loss and the less fruit firmness, which could be associated with the higher solubilization of pectins promoted by radiation treatment. Color (L* and Hue) was mainly affected by 1-MCP treatment which delayed color development, however, by the end of storage, the values were not different from the other treatments. SS/TA ratio was lower for fruits treated with 1-MCP and TA was not so dramatically affected by treatments. Furthermore, mini tomatoes harvested at light-red stage, demonstrated irradiation induced changes in the final content of lycopene, increasing it, and formed less (13Z)-lycopene, while 1-MCP and carnauba coating slow down the increase in lycopene and slown down the decrease of ascorbic acid and phenolic compounds. Antioxidant capacity of lipophilic fraction was not affected by treatments and the hydrophilic fraction was lower for irradiated fruits only on day 0 as well as phenolic compounds. In the other days, no differences among treatments were observed for hydrophilic antioxidant capacity. Considering the results, the best combination of SS and TA and fruit preservation for mini tomatoes harvest at breaker stage was promoted by carnauba coating, which seems to be the treatment that causes fewer changes in bioactive compounds of breaker tomatoes. However, when mini tomatoes were harvested at light-red stage, SS/TA ratio and color were better and, to preserve the quality of these fruits, besides carnauba coating, 1-MCP also could be indicated
Resumo:
The Ophira Mini Sling System involves anchoring a midurethral, low-tension tape to the obturator internus muscles bilaterally at the level of the tendinous arc. Success rates in different subsets of patients are still to be defined. This work aims to identify which factors influence the 2-year outcomes of this treatment. Analysis was based on data from a multicenter study. Endpoints for analysis included objective measurements: 1-h pad-weight (PWT), and cough stress test (CST), and questionnaires: International Consultation on Incontinence Questionnaire-Short Form (ICIQ-SF) and Urinary Distress Inventory (UDI)-6. A logistic regression analysis evaluated possible risk factors for failure. In all, 124 female patients with stress urinary incontinence (SUI) underwent treatment with the Ophira procedure. All patients completed 1 year of follow-up, and 95 complied with the 2-year evaluation. Longitudinal analysis showed no significant differences between results at 1 and 2 years. The 2-year overall objective results were 81 (85.3%) patients dry, six (6.3%) improved, and eight (8.4%) incontinent. A multivariate analysis revealed that previous anti-incontinence surgery was the only factor that significantly influenced surgical outcomes. Two years after treatment, women with previous failed surgeries had an odds ratio (OR) for treatment failure (based on PWT) of 4.0 [95% confidence interval (CI) 1.02-15.57). The Ophira procedure is an effective option for SUI treatment, with durable good results. Previous surgeries were identified as the only significant risk factor, though previously operated patients showed an acceptable success rate.
Resumo:
Tomato (Solanum lycopersicum) shows three growth habits: determinate, indeterminate and semi-determinate. These are controlled mainly by allelic variation in the SELF-PRUNING (SP) gene family, which also includes the florigen gene SINGLE FLOWER TRUSS (SFT). Determinate cultivars have synchronized flower and fruit production, which allows mechanical harvesting in the tomato processing industry, whereas indeterminate ones have more vegetative growth with continuous flower and fruit formation, being thus preferred for fresh market tomato production. The semi-determinate growth habit is poorly understood, although there are indications that it combines advantages of determinate and indeterminate growth. Here, we used near-isogenic lines (NILs) in the cultivar Micro-Tom (MT) with different growth habit to characterize semi-determinate growth and to determine its impact on developmental and productivity traits. We show that semi-determinate genotypes are equivalent to determinate ones with extended vegetative growth, which in turn impacts shoot height, number of leaves and either stem diameter or internode length. Semi-determinate plants also tend to increase the highly relevant agronomic parameter Brix×ripe yield (BRY). Water-use efficiency (WUE), evaluated either directly as dry mass produced per amount of water transpired or indirectly through C isotope discrimination, was higher in semi-determinate genotypes. We also provide evidence that the increases in BRY in semi-determinate genotypes are a consequence of an improved balance between vegetative and reproductive growth, a mechanism analogous to the conversion of the overly vegetative tall cereal varieties into well-balanced semi-dwarf ones used in the Green Revolution.
Resumo:
OBJETIVO: este estudo teve como objetivo avaliar a influência da largura do septo inter-radicular no local de inserção de mini-implantes autoperfurantes sobre o grau de estabilidade desses dispositivos de ancoragem. MÉTODOS: a amostra consistiu de 40 mini-implantes inseridos entre as raízes do primeiro molar e segundo pré-molar superiores de 21 pacientes, com o intuito de fornecer ancoragem para retração anterior. A largura do septo no local de inserção (LSI) foi mensurada nas radiografias pós-cirúrgicas e, sob esse aspecto, os mini-implantes foram divididos em dois grupos: grupo 1 (áreas críticas, LSI<3mm) e grupo 2 (áreas não críticas, LSI>3mm). A estabilidade dos mini-implantes foi avaliada mensalmente pela quantificação do grau de mobilidade e a partir dessa variável foi calculada a proporção de sucesso. Avaliou-se também: a quantidade de placa, altura de inserção, grau de sensibilidade e período de observação. RESULTADOS: os resultados obtidos demonstraram que não houve diferença estatisticamente significativa para o grau de mobilidade e proporção de sucesso entre os mini-implantes inseridos em septos de largura mesiodistal crítica e não crítica. A proporção de sucesso total encontrada foi de 90% e nenhuma variável demonstrou estar relacionada ao insucesso dos mini-implantes. No entanto, observou-se maior sensibilidade nos pacientes cujos mini-implantes apresentavam mobilidade, e que a falha desses dispositivos de ancoragem ocorria logo após sua inserção. CONCLUSÃO: a largura do septo inter-radicular no local de inserção não interferiu na estabilidade dos mini-implantes autoperfurantes avaliados neste estudo.
Resumo:
This study evaluated fracture torque by torsion, in relation to the length and diameter of orthodontic mini-implants, to demonstrate their viability for clinical and experimental use based on the torque recommended by the manufacturers. The fractures at the moment of insertion, whose incidence in the literature is around 4%, are principally due to excessive force and the inability of the implant to resist rotational forces. Thirty orthodontic mini-implants of three commercial brands available in Brazil (Neodent 1.6 x 9 mm, Dentoflex 1.6 x 9 mm and Kopp 1.6 x 9 mm) were attached to a device made specifically for this research, leaving the mini-implants with sufficient stability. The miniimplants were submitted to torsion torque, using a digital torque wrench, until their breaking point. The values obtained with the test were submitted to analysis of variance and the Tukey test. The mean values of mini-implant ruptures were 26 N.cm for group A (Dentoflex), 25.4 N. cm for group B (Kopp) and 32.8 N.cm for group C (Neodent). From the Tukey test we could observe that the relationships between the means of the Dentoflex and Neodent groups, and between the Kopp and Neodent groups, were significant. Between the Dentoflex and Kopp groups, significance was nonexistent. All the values found in our research for fracture torque were higher than the limits recommended by the manufacturers for clinical use in orthodontics. The highest values were found in the Neodent group.
Resumo:
OBJETIVO: o propósito do presente estudo é avaliar o limite de resistência à flexão de um protótipo de mini-implante desenvolvido para ancoragem do aparelho de Herbst. MÉTODOS: após a realização de um cálculo do tamanho da amostra, quatro corpos de prova contendo os protótipos de mini-implantes foram submetidos a uma força de flexão por engastamento simples, utilizando-se uma máquina universal de ensaios mecânicos, sendo calculado o limite de resistência à força de flexão. RESULTADOS: após os ensaios mecânicos, os novos mini-implantes apresentaram o limite de resistência à força de flexão de 98,2kgf, que foi o menor valor encontrado. CONCLUSÃO: os protótipos de mini-implantes desenvolvidos para ancoragem do aparelho de Herbst foram capazes de suportar forças de flexão maiores do que as forças de mordida descritas na literatura.
Resumo:
O objetivo deste trabalho foi avaliar a distribuição de tensões na resina em contato com os filetes de roscas de mini-implantes cilíndricos e cônicos, submetidos à carga lateral e torção de inserção. Um modelo fotoelástico foi confeccionado com gelatina transparente, para simular o osso alveolar. O modelo foi observado com um polariscópio plano e fotografado antes e após a ativação dos mini-implantes com força lateral e de inserção. A aplicação de cargas laterais provocou momentos fletores nos mini-implantes, aparecimento de franjas isocromáticas ao longo dos filetes do corpo dos mini-implantes e no ápice. Quando foi aplicado o torque de inserção, verificou-se a concentração de tensões próxima ao ápice. Concluiu-se que: (1) o mini-implante cilíndrico apresentou maior concentração de tensões no ápice, e (2) o mini-implante cônico apresentou maior concentração de tensões nos filetes de rosca apicais.
Resumo:
Background: The cultivar Micro-Tom (MT) is regarded as a model system for tomato genetics due to its short life cycle and miniature size. However, efforts to improve tomato genetic transformation have led to protocols dependent on the costly hormone zeatin, combined with an excessive number of steps. Results: Here we report the development of a MT near-isogenic genotype harboring the allele Rg1 (MT-Rg1), which greatly improves tomato in vitro regeneration. Regeneration was further improved in MT by including a two-day incubation of cotyledonary explants onto medium containing 0.4 mu M 1-naphthaleneacetic acid (NAA) before cytokinin treatment. Both strategies allowed the use of 5 mu M 6-benzylaminopurine (BAP), a cytokinin 100 times less expensive than zeatin. The use of MT-Rg1 and NAA pre-incubation, followed by BAP regeneration, resulted in high transformation frequencies (near 40%), in a shorter protocol with fewer steps, spanning approximately 40 days from Agrobacterium infection to transgenic plant acclimatization. Conclusions: The genetic resource and the protocol presented here represent invaluable tools for routine gene expression manipulation and high throughput functional genomics by insertional mutagenesis in tomato.