Analysis of constructed wetland performance for irrigation reuse

Most of the wastewater treatment systems in small rural communities of the Cova da Beira region (Portugal) consist of constructed wetlands (CW) with horizontal subsurface flow (HSSF). It is believed that those systems allow the compliance of discharge standards as well as the production of final effluents with suitability for reuse. Results obtained in a nine-month campaign in an HSSF bed pointed out that COD and TSS removal were lower than expected. A discrete sampling also showed that removal of TC, FC and HE was not enough to fulfill international irrigation goals. However, the bed had a very good response to variation of incoming nitrogen loads presenting high removal of nitrogen forms. A good correlation between mass load and mass removal rate was observed for BOD5, COD, TN, NH4-N, TP and TSS, which shows a satisfactory response of the bed to the variable incoming loads. The entrance of excessive loads of organic matter and solids contributed for the decrease of the effective volume for pollutant uptake and therefore, may have negatively influenced the treatment capability. Primary treatment should be improved in order to decrease the variation of incoming organic and solid loads and to improve the removal of COD, solids and pathogenic. The final effluent presented good physical-chemical quality to be reused for irrigation, which is the most likely application in the area.

Otimização de um processo produtivo e formulação de um novo produto utilizando ferramentas estatísticas

Na tentativa de se otimizar o processo de fabrico associado a uma tinta base aquosa (TBA), para minimizar os desvios de viscosidade final verificados, e de desenvolver um novo adjuvante plastificante para betão, recorreu-se a métodos e ferramentas estatísticas para a concretização do projeto. Relativamente à TBA, procedeu-se numa primeira fase a um acompanhamento do processo de fabrico, a fim de se obter todos os dados mais relevantes que poderiam influenciar a viscosidade final da tinta. Através de uma análise de capacidade ao parâmetro viscosidade, verificou-se que esta não estava sempre dentro das especificações do cliente, sendo o cpk do processo inferior a 1. O acompanhamento do processo resultou na escolha de 4 fatores, que culminou na realização de um plano fatorial 24. Após a realização dos ensaios, efetuou-se uma análise de regressão a um modelo de primeira ordem, não tendo sido esta significativa, o que implicou a realização de mais 8 ensaios nos pontos axiais. Com arealização de uma regressão passo-a-passo, obteve-se uma aproximação viável a um modelo de segunda ordem, que culminou na obtenção dos melhores níveis para os 4 fatores que garantem que a resposta viscosidade se situa no ponto médio do intervalo de especificação (1400 mPa.s). Quanto ao adjuvante para betão, o objetivo é o uso de polímeros SIKA ao invés da matériaprima comum neste tipo de produtos, tendo em conta o custo final da formulação. Escolheram-se 3 fatores importantes na formulação do produto (mistura de polímeros, mistura de hidrocarbonetos e % de sólidos), que resultou numa matriz fatorial 23. Os ensaios foram realizados em triplicado, em pasta de cimento, um para cada tipo de cimento mais utilizado em Portugal. Ao efetuar-se a análise estatística de dados obtiveram-se modelos de primeira ordem para cada tipo de cimento. O processo de otimização consistiu em otimizar uma função custo associada à formulação, garantindo sempre uma resposta superior à observada pelo produto considerado padrão. Os resultados foram animadores uma vez que se obteve para os 3 tipos de cimentocustos abaixo do requerido e espalhamento acima do observado pelo padrão.

Painokoneen suorituskykyanalyysi tuotannon tehokkuuden arvioimiseksi ja hinnoittelupäätösten tueksi

Työn tavoite on analysoida kirjapainon offsetrotaatiopainokoneen painoyksikön yksi, eli pienen linjan, ja painoyksiköiden kaksi ja kolme muodostaman painokoneen, eli ison linjan, suorituskykyä vuosien 1996-1997 ja vuosien 2002-2006 tuotantotietojen perusteella. Analyysit on tehty erikseen molemmille linjoille vuosien 1996-1997 ja vuosien 2002-2006 osalta, koska nettoajonopeudet ovat laskeneet molemmilla painolinjoilla huomattavasti vuosista 1996 ja 1997. Suorituskykyanalyysien perusteella ei löytynyt mitään teknistä tai töiden ominaisuuksista johtuvaa syytä ajonopeuksien huomattavaan laskuun. Työssä on tutkittu painotyön ominaisuuksien perusteella määräytyvän tuotantotavan, painopaperin ja painosmäärän vaikutusta ajonopeuteen ja sitä kautta toteutuneeseen ajohintaan. Suorituskykyanalyysien pohjalta on muodostettu molemmille linjoille erityyppisten tuotteiden sisäiseen hinnoitteluun sopivat regressiomallit, joilla voidaan parhaiten estimoida erilaisten tuotteiden ajohintoja. Työssä on tarkasteltu lyhyesti myös painokoneen kuntoonlaitto- ja häiriöaikojen sekä hukkamäärien kehitystä, koska ajonopeus pelkästään ei anna oikeaa kuvaa koko tuotannon tehokkuudesta. Kokonaistehokkuuden parantaminen on korkeiden ajonopeuksien lisäksi edellytys kirjapainon kilpailukyvyn säilyttämiseksi.

Role of Capabilities in Purchasing and Supply Management Performance

The objective of this thesis was to study the role of capabilities in purchasing and supply management. For the pre-understanding of the research topic, purchasing and supply management development and the multidimensional, unstructured and complex nature of purchasing and supply management performance was studied in literature review. In addition, a capability-based purchasing and supply management performance framework were researched and structured for the empirical research. Due to the unstructured nature of the research topic, the empirical research is three-pronged in this study including three different research methods: the Delphi method, semi-structured interview, and case research. As a result, the purchasing and supply management capability assessment tool was structured to measure current level of capabilities and impact of capabilities on purchasing and supply management performance. The final results indicate that capabilities are enablers of purchasing and supply management performance, and therefore critical to purchasing and supply performance.

Variabilidade espacial e diagnóstico da qualidade do processo em semeadura de amendoim

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quality of cut and basecutter blade configuration for the mechanized harvest of green sugarcane

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Trust, alliance management capability and the alliance management function: A comparative analysis of Portuguese SMEs

Strategic alliances represent a key driver for internationalization and growth, being the purpose of this work project to better understand the intertwined relationship between trust and the existence of an alliance management position. Previous research supports the positive impact of such position in stock market returns. However, little attention has been given to the impact of such position on the level of trust in the collaborative arrangement, which is deemed to be a key driver for alliance success. A qualitative comparative case-study of three Portuguese SMEs is used to draw conclusions from the literature to real life business cases and it demonstrates the positive impact of an alliance management position on trust.

An instrumental analysis of the European Union's capability to act in conflict response

Descripció i anàlisi dels instruments polítics, econòmics, civils i militars de la Unió Europea per enfrontar qualsevol conflicte.

An Instrumental analysis of the European Union´s capability to act in conflict response

Since its origins, the European Union has striven to be an actor on the International scene and a place in conflict Management. Yet the EU’s lack of activity cannot be justified by a mere lack of capacities. The EU counts with numerous political, economic, and, since 2003, civil and military instruments that should allow it to precede a comprehensive conflict response. This publication consists of a description of these instruments and an analysis of the final use that the Union makes of them in the different stages of a conflict. Examples will show us the EU’s main weakness in providing a comprehensive and timely response when a conflict breaks out.

Childhood socioeconomic position and objectively measured physical capability levels in adulthood: a systematic review and meta-analysis.

BACKGROUND: Grip strength, walking speed, chair rising and standing balance time are objective measures of physical capability that characterise current health and predict survival in older populations. Socioeconomic position (SEP) in childhood may influence the peak level of physical capability achieved in early adulthood, thereby affecting levels in later adulthood. We have undertaken a systematic review with meta-analyses to test the hypothesis that adverse childhood SEP is associated with lower levels of objectively measured physical capability in adulthood. METHODS AND FINDINGS: Relevant studies published by May 2010 were identified through literature searches using EMBASE and MEDLINE. Unpublished results were obtained from study investigators. Results were provided by all study investigators in a standard format and pooled using random-effects meta-analyses. 19 studies were included in the review. Total sample sizes in meta-analyses ranged from N = 17,215 for chair rise time to N = 1,061,855 for grip strength. Although heterogeneity was detected, there was consistent evidence in age adjusted models that lower childhood SEP was associated with modest reductions in physical capability levels in adulthood: comparing the lowest with the highest childhood SEP there was a reduction in grip strength of 0.13 standard deviations (95% CI: 0.06, 0.21), a reduction in mean walking speed of 0.07 m/s (0.05, 0.10), an increase in mean chair rise time of 6% (4%, 8%) and an odds ratio of an inability to balance for 5s of 1.26 (1.02, 1.55). Adjustment for the potential mediating factors, adult SEP and body size attenuated associations greatly. However, despite this attenuation, for walking speed and chair rise time, there was still evidence of moderate associations. CONCLUSIONS: Policies targeting socioeconomic inequalities in childhood may have additional benefits in promoting the maintenance of independence in later life.

The capability-affordance model: a method for analysis and modelling of capabilities and affordances

Existing capability models lack qualitative and quantitative means to compare business capabilities. This paper extends previous work and uses affordance theories to consistently model and analyse capabilities. We use the concept of objective and subjective affordances to model capability as a tuple of a set of resource affordance system mechanisms and action paths, dependent on one or more critical affordance factors. We identify an affordance chain of subjective affordances by which affordances work together to enable an action and an affordance path that links action affordances to create a capability system. We define the mechanism and path underlying capability. We show how affordance modelling notation, AMN, can represent affordances comprising a capability. We propose a method to quantitatively and qualitatively compare capabilities using efficiency, effectiveness and quality metrics. The method is demonstrated by a medical example comparing the capability of syringe and needless anaesthetic systems.

Capability outcomes from educational and ICT capability inputs : an analysis of ICT use in informal education in Kenya

In the field of Information and Communication Technologies for Development (ICT4D) ICT use in education is well studied. Education is often seen as a pre-requisite for development and ICTs are believed to aid in education, e.g. to make it more accessible and to increase its quality. In this paper we study the access and use of ICT in a study circle (SC) education program in the south coast of Kenya. The study is qualitative reporting results based on interviews and observations with SC participants, government officers and SC coordinators and teachers. The study builds on the capability approach perspective of development where individuals’ opportunities and ability to live a life that they value are focused. The aim of the study is to investigate the capability outcomes enabled through the capability inputs access and use of ICT in education as well as the factors that enabled and/or restricted the outcomes. Findings show that many opportunities have been enabled such as an increase in the ability to generate an income, learning benefits, community development and basic human development (e.g. literacy and self-confidence). However, conversion factors such as a poorly developed infrastructure and poor IT literacy prevent many of the individuals from taking full advantage of the ICT and the opportunities it enables. 

Reduction capability of soil humic substances from the Rio Negro basin, Brazil, towards Hg(II) studied by a multimethod approach and principal component analysis (PCA)

This paper characterizes humic substances (HS) extracted from soil samples collected in the Rio Negro basin in the state of Amazonas, Brazil, particularly investigating their reduction capabilities towards Hg(II) in order to elucidate potential mercury cycling/volatilization in this environment. For this reason, a multimethod approach was used, consisting of both instrumental methods (elemental analysis, EPR, solid-state NMR, FIA combined with cold-vapor AAS of Hg(0)) and statistical methods such as principal component analysis (PCA) and a central composite factorial planning method. The HS under study were divided into groups, complexing and reducing ones, owing to different distribution of their functionalities. The main functionalities (cor)related with reduction of Hg(II) were phenolic, carboxylic and amide groups, while the groups related with complexation of Hg(II) were ethers, hydroxyls, aldehydes and ketones. The HS extracted from floodable regions of the Rio Negro basin presented a greater capacity to retain (to complex, to adsorb physically and/or chemically) Hg(II), while nonfloodable regions showed a greater capacity to reduce Hg(II), indicating that HS extracted from different types of regions contribute in different ways to the biogeochemical mercury cycle in the basin of the mid-Rio Negro, AM, Brazil. (c) 2007 Published by Elsevier B.V.