Linear binocular combination of responses to contrast modulation:contrast-weighted summation in first- and second-order vision

Binocular combination for first-order (luminancedefined) stimuli has been widely studied, but we know rather little about this binocular process for spatial modulations of contrast (second-order stimuli). We used phase-matching and amplitude-matching tasks to assess binocular combination of second-order phase and modulation depth simultaneously. With fixed modulation in one eye, we found that binocularly perceived phase was shifted, and perceived amplitude increased almost linearly as modulation depth in the other eye increased. At larger disparities, the phase shift was larger and the amplitude change was smaller. The degree of interocular correlation of the carriers had no influence. These results can be explained by an initial extraction of the contrast envelopes before binocular combination (consistent with the lack of dependence on carrier correlation) followed by a weighted linear summation of second-order modulations in which the weights (gains) for each eye are driven by the first-order carrier contrasts as previously found for first-order binocular combination. Perceived modulation depth fell markedly with increasing phase disparity unlike previous findings that perceived first-order contrast was almost independent of phase disparity. We present a simple revision to a widely used interocular gain-control theory that unifies first- and second-order binocular summation with a single principle-contrast-weighted summation-and we further elaborate the model for first-order combination. Conclusion: Second-order combination is controlled by first-order contrast.

Exponential stability of time-delay systems via new weighted integral inequalities

In this paper, new weighted integral inequalities (WIIs) are first derived based on Jensen's integral inequalities in single and double forms. It is theoretically shown that the newly derived inequalities in this paper encompass both the Jensen inequality and its most recent improvement based on Wirtinger's integral inequality. The potential capability of WIIs is demonstrated through applications to exponential stability analysis of some classes of time-delay systems in the framework of linear matrix inequalities (LMIs). The effectiveness and least conservativeness of the derived stability conditions using WIIs are shown by various numerical examples.

Stochastic stability of nonlinear discrete-time Markovian jump systems with time-varying delay and partially unknown transition rates

This paper is concerned with stochastic stability of a class of nonlinear discrete-time Markovian jump systems with interval time-varying delay and partially unknown transition probabilities. A new weighted summation inequality is first derived. We then employ the newly derived inequality to establish delay-dependent conditions which guarantee the stochastic stability of the system. These conditions are derived in terms of tractable matrix inequalities which can be computationally solved by various convex optimized algorithms. Numerical examples are provided to illustrate the effectiveness of the obtained results.

Weighted input predictive controller

A discrete-time algorithm is presented which is based on a predictive control scheme in the form of dynamic matrix control. A set of control inputs are calculated and made available at each time instant, the actual input applied being a weighted summation of the inputs within the set. The algorithm is directly applicable in a self-tuning format and is therefore suitable for slowly time-varying systems in a noisy environment.

Landau and Kolmogoroff type polynomial inequalities II

Let 0 < j < m ≤ n. Kolmogoroff type inequalities of the form ∥f(j)∥2 ≤ A∥f(m)∥ 2 + B∥f∥2 which hold for algebraic polynomials of degree n are established. Here the norm is defined by ∫ f2(x)dμ(x), where dμ(x) is any distribution associated with the Jacobi, Laguerre or Bessel orthogonal polynomials. In particular we characterize completely the positive constants A and B, for which the Landau weighted polynomial inequalities ∥f′∥ 2 ≤ A∥f″∥2 + B∥f∥ 2 hold. © Dynamic Publishers, Inc.

Person re-identification using group information

After first observing a person, the task of person re-identification involves recognising an individual at different locations across a network of cameras at a later time. Traditionally, this task has been performed by first extracting appearance features of an individual and then matching these features to the previous observation. However, identifying an individual based solely on appearance can be ambiguous, particularly when people wear similar clothing (i.e. people dressed in uniforms in sporting and school settings). This task is made more difficult when the resolution of the input image is small as is typically the case in multi-camera networks. To circumvent these issues, we need to use other contextual cues. In this paper, we use "group" information as our contextual feature to aid in the re-identification of a person, which is heavily motivated by the fact that people generally move together as a collective group. To encode group context, we learn a linear mapping function to assign each person to a "role" or position within the group structure. We then combine the appearance and group context cues using a weighted summation. We demonstrate how this improves performance of person re-identification in a sports environment over appearance based-features.

Parallelism in control

A parallel structure is suggested for feedback control systems. Such a technique can be applied to either single or multi-sensor environments and is ideally suited for parallel processor implementation. The control input actually applied is based on a weighted summation of the different parallel controller values, the weightings being either fixed values or chosen by an adaptive decision-making mechanism. The effect of different controller combinations is a field now open to study.

Producing a GIS based multiple criteria analysis tool for regional sustainability assessment: the problem of weighting

Decision support tools will be useful in guiding regions to sustainability. These need to be simple but effective at identifying, for regional managers, areas most in need of initiatives to progress sustainability. Multiple criteria analysis (MCA) is often used as a decision support tool for a wide range of applications. This method allows many criteria to be considered at one time. It does this by giving a ranking of possible options based on how closely each option meets the criteria. Thus, it is suited to the assessment of regional sustainability as it can consider a number of indicators simultaneously and demonstrates how sustainability can vary at small scales across the region. Coupling MCA with GIS to produce maps, allows this analysis to become visual giving the manager a picture of sustainability across the region. To do this each indicator is standardised to a common scale so that it can be compared to other indicators. A weighting is then applied to each indicator to calculate weighted summation for each area in the region. This paper argues that this is the critical step in developing a useful decision support tool. A study being conducted in south west Victoria demonstrates that the weights chosen can have a dramatic impact on the results of the sustainability assessment. It is therefore imperative that careful consideration be given to determining indicator weights in a way that is objective and fully considers the impact of that indicator on regional sustainability.

Stability analysis of two-dimensional Markovian jump state-delayed systems in the Roesser model with uncertain transition probabilities

This paper is concerned with the problem of stochastic stability analysis of discrete-time two-dimensional (2-D) Markovian jump systems (MJSs) described by the Roesser model with interval time-varying delays. The transition probabilities of the jumping process/Markov chain are assumed to be uncertain, that is, they are not exactly known but can be estimated. A Lyapunov-like scheme is first extended to 2-D MJSs with delays. Based on some novel 2-D summation inequalities proposed in this paper, delay-dependent stochastic stability conditions are derived in terms of linear matrix inequalities (LMIs) which can be computationally solved by various convex optimization algorithms. Finally, two numerical examples are given to illustrate the effectiveness of the obtained results.

Weighted Inequalities and Lipschitz Spaces

In this thesis I have characterized the trace measures for particular potential spaces of functions defined on R^n, but "mollified" so that the potentials are de facto defined on the upper half-space of R^n. The potential functions are kind Riesz-Bessel. The characterization of trace measures for these spaces is a test condition on elementary sets of the upper half-space. To prove the test condition as sufficient condition for trace measures, I had give an extension to the case of upper half-space of the Muckenhoupt-Wheeden and Wolff inequalities. Finally I characterized the Carleson-trace measures for Besov spaces of discrete martingales. This is a simplified discrete model for harmonic extensions of Lipschitz-Besov spaces.

Some Dynamic Generalized Information Measures In The Context Of Weighted Models

In this paper, we study some dynamic generalized information measures between a true distribution and an observed (weighted) distribution, useful in life length studies. Further, some bounds and inequalities related to these measures are also studied

Discrete inequalities based on multiple auxiliary functions and their applications to stability analysis of time-delay systems

Abstract
This paper presents new discrete inequalities for single summation and double summation. These inequalities are based on multiple auxiliary functions and include the Jensen discrete inequality and the discrete Wirtinger-based inequality as special cases. An application of these discrete inequalities to analyse stability of linear discrete systems with an interval time-varying delay is studied and a less conservative stability condition is obtained. Three numerical examples are given to show the effectiveness of the obtained stability condition.

Chebyshev-Laurent polynomials and weighted approximation

Let (a, b) subset of (0, infinity) and for any positive integer n, let S-n be the Chebyshev space in [a, b] defined by S-n:= span{x(-n/2+k),k= 0,...,n}. The unique (up to a constant factor) function tau(n) is an element of S-n, which satisfies the orthogonality relation S(a)(b)tau(n)(x)q(x) (x(b - x)(x - a))(-1/2) dx = 0 for any q is an element of Sn-1, is said to be the orthogonal Chebyshev S-n-polynomials. This paper is an attempt to exibit some interesting properties of the orthogonal Chebyshev S-n-polynomials and to demonstrate their importance to the problem of approximation by S-n-polynomials. A simple proof of a Jackson-type theorem is given and the Lagrange interpolation problem by functions from S-n is discussed. It is shown also that tau(n) obeys an extremal property in L-q, 1 less than or equal to q less than or equal to infinity. Natural analogues of some inequalities for algebraic polynomials, which we expect to hold for the S-n-pelynomials, are conjectured.

Series in Mittag-Leffler Functions: Inequalities and Convergent Theorems

MSC 2010: 30A10, 30B10, 30B30, 30B50, 30D15, 33E12

Binocular summation, binocular fusion and the transition to diplopia

The visual system combines spatial signals from the two eyes to achieve single vision. But if binocular disparity is too large, this perceptual fusion gives way to diplopia. We studied and modelled the processes underlying fusion and the transition to diplopia. The likely basis for fusion is linear summation of inputs onto binocular cortical cells. Previous studies of perceived position, contrast matching and contrast discrimination imply the computation of a dynamicallyweighted sum, where the weights vary with relative contrast. For gratings, perceived contrast was almost constant across all disparities, and this can be modelled by allowing the ocular weights to increase with disparity (Zhou, Georgeson & Hess, 2014). However, when a single Gaussian-blurred edge was shown to each eye perceived blur was invariant with disparity (Georgeson & Wallis, ECVP 2012) – not consistent with linear summation (which predicts that perceived blur increases with disparity). This blur constancy is consistent with a multiplicative form of combination (the contrast-weighted geometric mean) but that is hard to reconcile with the evidence favouring linear combination. We describe a 2-stage spatial filtering model with linear binocular combination and suggest that nonlinear output transduction (eg. ‘half-squaring’) at each stage may account for the blur constancy.