Generation of cell-to-cell signals in quorum sensing: acyl homoserine lactone synthase activity of a purified Vibrio fischeri LuxI protein.

Many bacteria use acyl homoserine lactone signals to monitor cell density in a type of gene regulation termed quorum sensing and response. Synthesis of these signals is directed by homologs of the luxi gene of Vibrio fischeri. This communication resolves two critical issues concerning the synthesis of the V. fischeri signal. (i) The luxI product is directly involved in signal synthesis-the protein is an acyl homoserine lactone synthase; and (ii) the substrates for acyl homoserine lactone synthesis are not amino acids from biosynthetic pathways or fatty acid degradation products, but rather they are S-adenosylmethionine (SAM) and an acylated acyl carrier protein (ACP) from the fatty acid biosynthesis pathway. We purified a maltose binding protein-LuxI fusion polypeptide and showed that, when provided with the appropriate substrates, it catalyzes the synthesis of an acyl homoserine lactone. In V. fischeri, luxi directs the synthesis of N-(3-oxohexanoyl) homoserine lactone and hexanoyl homoserine lactone. The purified maltose binding protein-LuxI fusion protein catalyzes the synthesis of hexanoyl homoserine lactone from hexanoyl-ACP and SAM. There is a high level of specificity for hexanoyl-ACP over ACPs with differing acyl group lengths, and hexanoyl homoserine lactone was not synthesized when SAM was replaced with other amino acids, such as methionine, S-adenosylhomocysteine, homoserine, or homoserine lactone, or when hexanoyl-SAM was provided as the substrate. This provides direct evidence that the LuxI protein is an auto-inducer synthase that catalyzes the formation of an amide bond between SAM and a fatty acyl-ACP and then catalyzes the formation of the acyl homoserine lactone from the acyl-SAM intermediate.

Rotation of Vibrio fischeri Flagella Produces Outer Membrane Vesicles That Induce Host Development

Using the squid-vibrio association, we aimed to characterize the mechanism through which Vibrio fischeri cells signal morphogenesis of the symbiotic light-emitting organ. The symbiont releases two cell envelope molecules, peptidoglycan (PG) and lipopolysaccharide (LPS) that, within 12 h of light organ colonization, act in synergy to trigger normal tissue development. Recent work has shown that outer membrane vesicles (OMVs) produced by V. fischeri are sufficient to induce PG-dependent morphogenesis; however, the mechanism(s) of OMV release by these bacteria has not been described. Like several genera of both beneficial and pathogenic bacteria, V. fischeri cells elaborate polar flagella that are enclosed by an extension of the outer membrane, whose function remains unclear. Here, we present evidence that along with the well-recognized phenomenon of blebbing from the cell's surface, rotation of this sheathed flagellum also results in the release of OMVs. In addition, we demonstrate that most of the development-inducing LPS is associated with these OMVs and that the presence of the outer membrane protein OmpU but not the LPS O antigen on these OMVs is important in triggering normal host development. These results also present insights into a possible new mechanism of LPS release by pathogens with sheathed flagella. IMPORTANCE Determining the function(s) of sheathed flagella in bacteria has been challenging, because no known mutation results only in the loss of this outer membrane-derived casing. Nevertheless, the presence of a sheathed flagellum in such host-associated genera as Vibrio, Helicobacter, and Brucella has led to several proposed functions, including physical protection of the flagella and masking of their immunogenic flagellins. Using the squid-vibrio light organ symbiosis, we demonstrate another role, that of V. fischeri cells require rotating flagella to induce apoptotic cell death within surface epithelium, which is a normal step in the organ's development. Further, we present evidence that this rotation releases apoptosis-triggering lipopolysaccharide in the form of outer membrane vesicles. Such release may also occur by pathogens but with different outcomes for the host.

Photocatalytic degradation of dimethoate using LbL fabricated TiO2/polymer hybrid films

Degradation of dimethoate under UV irradiation using TiO2/polymer films prepared by the layer-by-layer (LbL) method was investigated. The thin films were fabricated on glass slides and the surface morphology and roughness of the thin films were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The effect of lamp intensity, catalyst loading in the layers, number of bilayers, pH and initial dimethoate concentration on the degradation of dimethoate was systematically studied. The degradation was monitored using high performance liquid chromatography (HPLC) analysis and total organic carbon (TOC) measurements as a function of irradiation time, to see the change in concentration of dimethoate and mineralization, respectively. Complete degradation of dimethoate was achieved under TiO2 optimum loading of 4 g/L at an UV irradiation time of 180 min. Increase in the lamp intensity, catalyst loading and number of bilayers increased the rate of degradation. At a pH of 4.62, complete degradation of dimethoate was observed. The degradation efficiency decreased with increase in initial dimethoate concentration. The degradation byproducts were analyzed and confirmed by gas chromatography-mass spectra (GC-MS). Toxicity of the irradiated samples was measured using the luminescence of bacteria Vibrio fischeri after 30 min of incubation and the results showed more toxicity than the parent compound. Catalyst reusability studies revealed that the fabricated thin films could be repeatedly used for up to ten times without affecting the photocatalytic activity of the films. The findings of the present study are very useful for the treatment of wastewaters contaminated with pesticides. (C) 2011 Elsevier B.V. All rights reserved.

New tools for self-organised pattern formation

Position-dependent gene expression is a critical aspect of the development and behaviour of multicellular organisms. It requires a complex series of interactions to occur between different cell types in addition to intracellular signalling cascades. We used Escherichia coli to study the properties of an artificial signalling system at the interface between two expanding cell populations. We genetically engineered one population to produce a diffusible acyl-homoserine lactone (AHL) signal, and another population to respond to it. Our experiments demonstrate how such a signal can be used to reproducibly generate simple visible patterns with high accuracy in swimming agar. The producing and responding cassettes of two such signalling systems can be linked to produce a symmetric interface for bidirectional communication that can be used to visualise molecular logic. Intracellular feedback between these two cassettes would then create a framework for self-organised patterning of higher complexity. Adapting the experiments of Basu et al. (Basu et al., 2005) using cell motility, rather than a differential response to AHL concentrations as a way to define zones of response, we noted how the interaction of sender and receiver cell populations on a swimming plate could lead to complex pattern formation. Equipping highly motile strains such as E. coli MC1000 with AHL-mediated auto-inducing systems based on Vibrio fischeri luxI/luxR and Pseudomonas aeruginosa lasI/lasR cassettes would allow the amplification of a response to an AHL signal and its propagation. We designed and synthesised codon-optimised auto-inducing luxI/R and lasI/R cassettes as optimal gene expression is crucial for the generation of robust patterns. We still have to complete and test the entire genetic circuitry, although by modelling the system we were able to demonstrate its feasibility. © 2007 The Institution of Engineering and Technology.

Estudo experimental de wetlands construídos como unidade de polimento no tratamento de lixiviados de aterros sanitários.

A grande quantidade de resíduos sólidos gerados nas cidades é um desafio para o saneamento ambiental no Brasil. A fim de se reduzir os impactos gerados ao meio ambiente e à saúde pública, é necessário que haja um gerenciamento adequado, desde a coleta até a disposição final, desses resíduos sólidos urbanos. Os aterros sanitários permitem um maior controle ambiental, desde que sejam bem projetados e operados. A decomposição da matéria orgânica presente nesses resíduos, somada às águas das chuvas gera o lixiviado, líquido com alto potencial poluidor. Várias formas de tratamento são propostas com a finalidade de tornar o lixiviado menos poluente ao meio ambiente. Wetlands construídos tem se mostrado uma alternativa eficiente para a remoção de poluentes em lixiviados, além dos baixos custos operacionais e de implantação. O presente estudo investigou o uso de wetlands subsuperficiais em escala-piloto para o tratamento de um lixiviado prétratado. Os wetlands foram monitorados com a finalidade de se obter remoções de matéria orgânica e nitrogênio amoniacal. As maiores reduções percentuais de concentração de nitrogênio amoniacal, DQO e COD foram, 91%, 42% e 35%, respectivamente. As maiores reduções percentuais em carga de nitrogênio amoniacal e DQO foram, 67% e 50%, respectivamente. Os resultados dos ensaios de toxicidade realizados com os organismos Vibrio fischeri e Danio rerio revelaram que, a toxicidade do lixiviado foi reduzida ao ser tratado pelo wetland.

Estudo da contaminação e da toxicidade do solo do Aterro Metropolitano de Gramacho, Duque de Caxias RJ.

O Aterro Metropolitano de Gramacho, considerado o maior da América Latina, teve encerradas as suas atividades de disposição de resíduos em meados de 2012. A disposição de resíduos no local foi realizada diretamente sobre o solo de fundação desde o início de sua operação (1978). Considerando-se que os contaminantes presentes no lixiviado podem migrar por difusão através da argila organo-salina do aterro e atingir o entorno, foi feita uma investigação da contaminação do solo no perímetro do aterro. Essa investigação foi realizada no líquido intersticial do solo e foi pautada em dois tipos de contaminantes: nitrogênio amoniacal e compostos orgânicos, medidos pelo parâmetro carbono orgânico total (COT). Além disso, foram também realizados ensaios de toxicidade aguda com a espécie Vibrio fischeri para avaliar a toxicidade no solo. Ensaios de sorção e difusão foram executados a fim de melhor compreender o comportamento dos contaminantes investigados. Os resultados apontaram baixos valores de nitrogênio amoniacal e de COT no solo. Os valores de nitrogênio amoniacal são considerados baixos, pois mesmo em amostras de solo da barreira lateral, que é situada próxima à antiga vala de drenagem de lixiviado, estes são menores que 1% do encontrado no lixiviado, indicando a adsorção do solo. Os ensaios de toxicidade aguda apontaram o efeito Hormesis nas amostras de líquido intersticial, indicando a possibilidade de presença de toxicidade crônica.

Avaliação de toxicidade de efluentes industriais utilizando organismos de três níveis tróficos.

O objetivo do estudo foi avaliar a qualidade de efluentes líquidos industriais, pela caracterização físico-química e ensaios ecotoxicológicos agudos com Danio rerio, Daphnia similis e Vibrio fischeri. Foram comparadas as sensibilidades dos organismos-teste aos variados tipos de efluentes (indústrias alimentícias, papeleiras, bebidas, petroquímicas e farmacêutica), sendo que estes organismos pertencem a três níveis tróficos diferentes. Além disso, foi implementado o método de ensaio com bactérias luminescentes, o Microtox, de acordo com a NBR 15411 (ABNT, 2006). Na maioria dos ensaios, os efluentes apresentaram parâmetros físico-químicos dentro dos limites permitidos pela legislação. Mesmo assim, algumas vezes foram observados efeitos nos organismos-teste. Foram utilizados efluentes tratados das ETEI, podendo ser avaliada a sensibilidade de cada organismo a cada efluente do estudo. Para a Indústria Alimentícia 1 foram realizadas coletas de efluente bruto e primário, que se mostraram tóxicos aos três organismos. Essa coleta também foi realizada para a Indústria Farmacêutica, na qual o efluente bruto foi tóxico aos três organismos e o efluente do tratamento primário, foi tóxico à Daphnia similis e à Vibrio fischeri. O efluente bruto da Indústria Alimentícia 2, da Indústria de Papel e Celulose 2 e da Indústria de Bebidas foram coletados e avaliados ecotoxicologicamente por meio do ensaio Microtox, demonstrando toxicidade aguda com baixos valores de CE(I)50 para todas as indústrias. Alguns parâmetros físicoquímicos das indústrias foram correlacionados com a toxicidade do efluente final para Daphnia similis, Danio rerio e Vibrio fischeri por meio da correlação de Spearman. O teste não paramétrico Mann-Whitney foi usado para comparar grupos de parâmetros físico-químicos que apresentaram presença ou ausência de toxicidade. Em alguns efluentes tratados das ETEI das Indústrias Alimentícia 1, Alimentícia 2, de Papel e Celulose 2 e Petroquímica 1, foram observadas respostas biológicas das bactérias aos efluentes, o efeito hormesis, que indica que a amostra não possui toxicidade aguda, mas é muito provável que apresente toxicidade crônica.

Distribution of drug resistant luminous bacteria in penaeid shrimp grow-out ponds

Distribution of luminous bacteria (LB) in penaeid shrimp grow-out pond water in semiintensive seawater farming system and their resistance to 15 antibacterials were investigated. Total viable counts and luminous bacterial counts in pond water ranged from 2.00xl03 to 1.35xl04/ml and l.OOxl01 to 8.00Xl02/ml, respectively. The percentage composition of LB in the total viable population increased significantly with period of culture. Five species of LB such as Vibrio fischeri, V. harveyi, V. orientalis, V. splendidus 1 and Photobacterium leiognathi were encountered. V. harveyi was the dominant species, constituting >80% of the total LB. Multiple antibiotic resistance was more common in these LB. Pond water isolates showed resistance to at least four antibacterial agents.

Bactérias e as suas redes sociais

Projeto de Pós-Graduação/Dissertação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Mestre em Ciências Farmacêuticas

Quantitative structure-toxicity relationships for chlorophenols to bioluminescent lux-marked bacteria using atom-based semi-empirical molecular-orbital descriptors

Literature data on the toxicity of chlorophenols for three luminescent bacteria (Vibrio fischeri, and the lux-marked Pseudomonas fluorescens 10586s pUCD607 and Burkholderia spp. RASC c2 (Tn4431)) have been analyzed in relation to a set of computed molecular physico-chemical properties. The quantitative structure-toxicity relationships of the compounds in each species showed marked differences when based upon semi-empirical molecular-orbital molecular and atom based properties. For mono-, di- and tri-chlorophenols multiple linear regression analysis of V. fischeri toxicity showed a good correlation with the solvent accessible surface area and the charge on the oxygen atom. This correlation successfully predicted the toxicity of the heavily chlorinated phenols, suggesting in V. fischeri only one overall mechanism is present for all chlorophenols. Good correlations were also found for RASC c2 with molecular properties, such as the surface area and the nucleophilic super-delocalizability of the oxygen. In contrast the best QSTR for P. fluorescens contained the 2nd order connectivity index and ELUMO suggesting a different, more reactive mechanism. Cross-species correlations were examined, and between V. fischeri and RASC c2 the inclusion of the minimum value of the nucleophilic susceptibility on the ring carbons produced good results. Poorer correlations were found with P. fluorescens highlighting the relative similarity of V. fischeri and RASC c2, in contrast to that of P. fluorescens.

Toxicity of chlorobenzenes to a lux-marked terrestrial bacterium, Pseudomonas fluorescens

Insertion of lux genes, encoding for bioluminescence in naturally bioluminescent marine bacteria, into the genome of Pseudomonas fluorescens resulted in a bioluminescent strain of this terrestrial bacterium. The lux- marked bacterium was used to toxicity test the chlorobenzene series. By correlating chlorobenzenes 50% effective concentration (EC50) values against physiochemical parameters, the physiochemical properties of chlorobenzenes that elicit toxic responses were investigated. The results showed that the more chlorinated the compounds, the more toxic they were to lux-marked P. fluorescens. Furthermore, it was shown that the more symmetrical the compound, the greater its toxicity to P. fluorescens. In general, the toxicity of a chlorobenzene was inversely proportional to its solubility (S) and directly proportional to its lipophilicity (K(ow). By correlating lux- marked P. fluorescens EC50 values, determined for chlorobenzenes, with toxicity values determined using Pimephales promelas (fathead minnow), Cyclotella meneghiniana (diatom), and Vibrio fischeri (marine bacterium), it was apparent that lux-marked P. fluorescens correlated well with freshwater species such as the diatoms and fathead minnow but not with the bioluminescent marine bacterium V. fischeri. The implications of these findings are that a terrestrial bacterium such as P. fluorescens should be used for toxicity testing of soils and freshwaters rather than the marine bacterium V. fischeri.

Photodynamic inactivation of bacteria by cationic porphyrins : their cellular targets and potential environmental applications

Photodynamic inactivation (PDI) is defined as the process of cell destruction by oxidative stress resulting from the interaction between light and a photosensitizer (PS), in the presence of molecular oxygen. PDI of bacteria has been extensively studied in recent years, proving to be a promising alternative to conventional antimicrobial agents for the treatment of superficial and localized infections. Moreover, the applicability of PDI goes far beyond the clinical field, as its potential use in water disinfection, using PS immobilized on solid supports, is currently under study. The aim of the first part of this work was to study the oxidative modifications in phospholipids, nucleic acids and proteins of Escherichia coli and Staphylococcus warneri, subjected to photodynamic treatment with cationic porphyrins. The aims of the second part of the work were to study the efficiency of PDI in aquaculture water and the influence of different physicalchemical parameters in this process, using the Gram-negative bioluminescent bacterium Vibrio fischeri, and to evaluate the possibility of recycling cationic PS immobilized on magnetic nanoparticles. To study the oxidative changes in membrane phospholipids, a lipidomic approach has been used, combining chromatographic techniques and mass spectrometry. The FOX2 assay was used to determine the concentration of lipid hydroperoxides generated after treatment. The oxidative modifications in the proteins were analyzed by one-dimensional polyacrylamide gel electrophoresis (SDS-PAGE). Changes in the intracellular nucleic acids were analyzed by agarose gel electrophoresis and the concentration of doublestranded DNA was determined by fluorimetry. The oxidative changes of bacterial PDI at the molecular level were analyzed by infrared spectroscopy. In laboratory tests, bacteria (108 CFU mL-1) were irradiated with white light (4.0 mW cm-2) after incubation with the PS (Tri-Py+-Me-PF or Tetra-Py+-Me) at concentrations of 0.5 and 5.0 μM for S. warneri and E. coli, respectively. Bacteria were irradiated with different light doses (up to 9.6 J cm-2 for S. warneri and up to 64.8 J cm-2 for E. coli) and the changes were evaluated throughout the irradiation time. In the study of phospholipids, only the porphyrin Tri-Py+-Me-PF and a light dose of 64.8 J cm-2 were tested. The efficiency of PDI in aquaculture has been evaluated in two different conditions: in buffer solution, varying temperature, pH, salinity and oxygen concentration, and in aquaculture water samples, to reproduce the conditions of PDI in situ. The kinetics of the process was determined in realtime during the experiments by measuring the bioluminescence of V. fischeri (107 CFU mL-1, corresponding to a level of bioluminescence of 105 relative light units). A concentration of 5.0 μM of Tri-Py+-Me-PF was used in the experiments with buffer solution, and 10 to 50 μM in the experiments with aquaculture water. Artificial white light (4.0 mW cm-2) and solar irradiation (40 mW cm-2) were used as light sources.

Development of polymeric materials to inhibit bacterial quorum sensing

Bacterial infections are an increasing problem for human health. In fact, an increasing number of infections are caused by bacteria that are resistant to most antibiotics and their combinations. Therefore, the scientific community is currently searching for new solutions to fight bacteria and infectious diseases, without promoting antimicrobial resistance. One of the most promising strategies is the disruption or attenuation of bacterial Quorum Sensing (QS), a refined system that bacteria use to communicate. In a QS event, bacteria produce and release specific small chemicals, signal molecules - autoinducers (AIs) - into the environment. At the same time that bacterial population grows, the concentration of AIs in the bacterial environment increases. When a threshold concentration of AIs is reached, bacterial cells respond to it by altering their gene expression profile. AIs regulate gene expression as a function of cell population density. Phenotypes mediated by QS (QSphenotypes) include virulence factors, toxin production, antibiotic resistance and biofilm formation. In this work, two polymeric materials (linear polymers and molecularly imprinted nanoparticles) were developed and their ability to attenuate QS was evaluated. Both types of polymers should to be able to adsorb bacterial signal molecules, limiting their availability in the extracellular environment, with expected disruption of QS. Linear polymers were composed by one of two monomers (itaconic acid and methacrylic acid), which are known to possess strong interactions with the bacterial signal molecules. Molecularly imprinted polymer nanoparticles (MIP NPs) are particles with recognition capabilities for the analyte of interest. This ability is attained by including the target analyte at the synthesis stage. Vibrio fischeri and Aeromonas hydrophila were used as model species for the study. Both the linear polymers and MIP NPs, tested free in solutions and coated to surfaces, showed ability to disrupt QS by decreasing bioluminescence of V. fischeri and biofilm formation of A. hydrophila. No significant effect on bacterial growth was detected. The cytotoxicity of the two types of polymers to a fibroblast-like cell line (Vero cells) was also tested in order to evaluate their safety. The results showed that both the linear polymers and MIP NPs were not cytotoxic in the testing conditions. In conclusion, the results reported in this thesis, show that the polymers developed are a promising strategy to disrupt QS and reduce bacterial infection and resistance. In addition, due to their low toxicity, solubility and easy integration by surface coating, the polymers have potential for applications in scenarios where bacterial infection is a problem: medicine, pharmaceutical, food industry and in agriculture or aquaculture.

Screening for biological activities with application in aquaculture in halophytes from the Algarve coastline

Infectious diseases often hamper the production of aquatic organisms in aquaculture systems, causing economical losses, environmental problems and consumer safety issues. The conventional way aquaculture producers had to control pathogens was by means of synthetic antibiotics and chemicals. This procedure had consequences in the emergence of more resilient pathogens, drug contamination of seafood products and local ecosystems. To avoid the repercussions of antibiotic use, vaccination has greatly replaced human drugs in western fish farms. However there is still massive unregulated antibiotic use in third world fish farms, so less expensive therapeutic alternatives for drugs are desperately needed. An alternative way to achieve disease control in aquaculture is by using natural bioactive organic compounds with antibiotic, antioxidant and/or immunostimulant properties. Such diverse biomolecules occur in bacteria, algae, fungi, higher plants and other organisms. Fatty acids, nucleotides, monosaccharides, polysaccharides, peptides, polyphenols and terpenoids, are examples of these substances. One promising source of bioactive compounds are salt tolerant plants. Halophytes have more molecular resources and defence mechanisms, when compared with other tracheophytes, to deal with the oxidative stresses of their habitat. Many halophytes have been used as a traditional food and medical supply, especially by African and Asian cultures. This scientific work evaluated the antibiotic, antioxidant, immunostimulant and metal chelating properties of Atriplex halimus L., Arthrocnemum macrostachyum Moric., Carpobrotus edulis L., Juncus acutus L. and Plantago coronopus L., from the Algarve coast. The antibiotic properties were tested against Listonella anguillarum, Photobacterium damselae piscicida and Vibrio fischeri. The immunostimulant properties were tested with cytochrome c and Griess assays on Sparus aurata head-kidney phagocytes. J. acutus ether extract inhibited the growth of P. damselae piscicida. A. macrostachyum, A. halimus, C. edulis, Juncus acutus and P. coronopus displayed antioxidant, copper chelating and iron chelating properties. These plants show potential as sources of bioactive compounds with application in aquaculture and in other fields.

Multiple linear and principal component regressions for modelling ecotoxicity bioassay response

The ecotoxicological response of the living organisms in an aquatic system depends on the physical, chemical and bacteriological variables, as well as the interactions between them. An important challenge to scientists is to understand the interaction and behaviour of factors involved in a multidimensional process such as the ecotoxicological response.With this aim, multiple linear regression (MLR) and principal component regression were applied to the ecotoxicity bioassay response of Chlorella vulgaris and Vibrio fischeri in water collected at seven sites of Leça river during five monitoring campaigns (February, May, June, August and September of 2006). The river water characterization included the analysis of 22 physicochemical and 3 microbiological parameters. The model that best fitted the data was MLR, which shows: (i) a negative correlation with dissolved organic carbon, zinc and manganese, and a positive one with turbidity and arsenic, regarding C. vulgaris toxic response; (ii) a negative correlation with conductivity and turbidity and a positive one with phosphorus, hardness, iron, mercury, arsenic and faecal coliforms, concerning V. fischeri toxic response. This integrated assessment may allow the evaluation of the effect of future pollution abatement measures over the water quality of Leça River.