A phenomenological model for the structure-composition relationship of the high Tc cuprates based on simple chemical principles

A simple phenomenological model for the relationship between structure and composition of the high Tc cuprates is presented. The model is based on two simple crystal chemistry principles: unit cell doping and charge balance within unit cells. These principles are inspired by key experimental observations of how the materials accommodate large deviations from stoichiometry. Consistent explanations for significant HTSC properties can be explained without any additional assumptions while retaining valuable insight for geometric interpretation. Combining these two chemical principles with a review of Crystal Field Theory (CFT) or Ligand Field Theory (LFT), it becomes clear that the two oxidation states in the conduction planes (typically d8 and d9) belong to the most strongly divergent d-levels as a function of deformation from regular octahedral coordination. This observation offers a link to a range of coupling effects relating vibrations and spin waves through application of Hund’s rules. An indication of this model’s capacity to predict physical properties for HTSC is provided and will be elaborated in subsequent publications. Simple criteria for the relationship between structure and composition in HTSC systems may guide chemical syntheses within new material systems.

Tailoring the structure, composition, optical properties and catalytic activity of Ag-Au nanoparticles by the galvanic replacement reaction

This Letter reports on the synthesis of Ag-Au nanoparticles (NPs) with controlled structures and compositions via a galvanic replacement reaction between Ag NPs and AuCl4(aq)- followed by the investigation of their optical and catalytic properties. Our results showed the formation of porous walls, hollow interiors and increased Au content in the Ag-Au NPs as the volume of AuCl4(aq)- employed in the reaction was increased. These variations led to a red shift and broadening of the SPR peaks and an increase of up to 10.9-folds in the catalytic activity towards the reduction of 4-nitrophenol relative to Ag NPs. (C) 2012 Elsevier B.V. All rights reserved.

Iron and steel : principles of manufacture, structure, composition and treatment ...

Principles of iron and steel manufacture.--Steel castings.--Steel hardening metals.--Development and use of high-speed steel.--Hardening steel, by E.R. Markham.--Case-hardening.--The Brinell method of testing the hardness of metals, by E. Oberg.

How to write letters; a manual of correspondence, showing the correct structure, composition, punctuation, formalities, and uses of the various kinds of letters, notes, and cards.

Mode of access: Internet.

Chitosan gel film bandages: correlating structure, composition, and antimicrobial properties

Chitosan gel films were successfully obtained by evaporation cast from chitosan solutions in aqueous acidic solutions of organic acids (lactic and acetic acid) as gel film bandages, with a range of additives that directly influence film morphology and porosity. We show that the structure and composition of a wide range of 128 thin gel films, is correlated to the antimicrobial properties, their biocompatibility and resistance to biodegradation. Infrared spectroscopy and solid-state 13C nuclear magnetic resonance spectroscopy was used to correlate film molecular structure and composition to good antimicrobial properties against 10 of the most prevalent Gram positive and Gram negative bacteria. Chitosan gel films reduce the number of colonies after 24 h of incubation by factors of ∼105–107 CFU/mL, compared with controls. For each of these films, the structure and preparation condition has a direct relationship to antimicrobial activity and effectiveness. These gel film bandages also show excellent stability against biodegradation with lysozyme under physiological conditions (5% weight loss over a period of 1 month, 2% in the first week), allowing use during the entire healing process. These chitosan thin films and subsequent derivatives hold potential as low-cost, dissolvable bandages, or second skin, with antimicrobial properties that prohibit the most relevant intrahospital bacteria that infest burn injuries.

Composition and electronic structure of Zn7-xMxSb2O12 (M = Ni and Co) spinel compounds

The relation between the composition and electronic structure of the perfectly inverse spinel compound Zn7-xMxSb2O12 (M = Ni and Co) has been studied by powder X-ray diffraction and X-ray photoelectron spectroscopy. Changes in the site occupancy are associated with shifts in the core levels as observed in the core level spectral analyses. The configuration of the density of states in the valence band due to the Co and Ni states can be observed in the valence band spectra. (C) 2004 Elsevier B.V. All rights reserved.

Zooplankton structure and dynamics in Mediterranean marshes (Empordà Wetlands): a size-based approach

Zooplankton community structure (composition, diversity, dynamics and trophic relationships) of Mediterranian marshes, has been analysed by means of a size based approach. In temporary basins the shape of the biomass-size spectra is related to the hydrological cycle. Linear shape spectra are more frequent in flooding situations when nutrient input causes population growth of small-sized organisms, more than compensating for the effect of competitive interactions. During confinement conditions the scarcity of food would decrease zooplankton growth and increase intra- and interspecific interactions between zooplankton organisms which favour the greatest sizes thus leading to the appearance of curved shape spectra. Temporary and permanent basins have similar taxonomic composition but the latter have higher species diversity, a more simplified temporal pattern and a size distribution dominated mainly by smaller sizes. In permanents basins zooplankton growth is not only conditioned by the availability of resources but by the variable predation of planktivorous fish, so that the temporal variability of the spectra may also be a result of temporal differences in fish predation. Size diversity seems to be a better indicator of the degree of this community structure than species diversity. The tendency of size diversity to increase during succession makes it useful to discriminate between different succession stages, fact that is not achieved by analysing only species diversity since it is low both under large and frequent or small and rare disturbances. Amino acid composition differences found among stages of copepod species indicate a gradual change in diet during the life cycle of these copepods, which provide evidence of food niche partitioning during ontogeny, whereas Daphnia species show a relatively constant amino acid composition. There is a relationship between the degree of trophic niche overlap among stages of the different species and nutrient concentration. Copepods, which have low trophic niche overlap among stages are dominant in food-limited environments, probably because trophic niche partitioning during development allow them to reduce intraspecific competition between adults, juveniles and nauplii. Daphnia species are only dominant in water bodies or periods with high productivity, probably due to the high trophic niche overlap between juveniles and adults. These findings suggest that, in addition to the effect of interspecific competition, predation and abiotic factors, the intraspecific competition might play also an important role in structuring zooplankton assemblages.

Influence of silver additions on the structure and phase transformation of the Cu-13 wt % Al alloy

The influence of silver additions on the structure and phase transformation of the Cu-13 wt % Al alloy was studied by differential thermal analysis, X-ray diffraction, scanning electron microscopy and energy dispersive analysis of X-rays. The results indicate that the presence of silver modifies the phase-stability field, the transition temperature and the structure of the alloy. These effects are more pronounced for silver concentrations up to 8 wt %.

Quantitative structural analysis of the transition from LT-Li xCoO2 to HT-LixCoO2 using the rietveld method: Correlation between structure and electrochemical performance

A quantitative phase analysis was made of LixCoO2 powders obtained by two distinct chemical methodologies at different temperatures (from 400 to 700°C). A phase analysis was made using Rietveld refinements based on X-ray diffraction data, considering the Li xCoO2 powders as a multiphase system that simultaneously contained two main phases with distinct, layered and spinel-type structures. The results showed the coexistence of both structures in LixCoO 2 obtained at low temperature (400 and 500°C), although only the layered structure was detected at higher temperatures (600 and 700°C), regardless of the chemical powder process employed. The electrochemical performance, evaluated mainly by the cycling reversibility of Li xCoO2 in the form of cathode insertion electrodes, revealed that there is a close correlation between structural features and the electrochemical response, with one of the redox processes (3.3 v/3.9 v) associated only with the presence of the spinel-type structure. © 2003 Elsevier B.V. All rights reserved.

Development of forest structure on cleared rainforest land in eastern Australia under different styles of reforestation

Rainforests in eastern Australia have been extensively cleared over the past two centuries. In recent decades, there have been increasing efforts to reforest some of these cleared lands, using a variety of methods, to meet a range of economic and environmental objectives. However, the extent to which the various styles of reforestation restore structure, composition and ecological function to cleared land is not presently understood. In this study, we develop and apply a method for quantifying the structural attributes of reforestation sites in tropical and subtropical Australia. The types of reforestation studied were plantation monocultures, mixed-species cabinet timber plots, diverse restoration plantings and unmanaged regrowth. Two age classes of reforestation were examined: 'young' (5-22 years), incorporating sites from all categories, and 'old' (30-70 years), in which only monoculture plantations and regrowth were represented. A total of 104 sites were surveyed including reference sites in intact rainforest and pasture. Intact rainforest was characterised by a suite of complex structural features including abundant special life forms (vines, epiphytes, hemi-epiphytes and strangler figs), a dense stand of trees in a range of size classes, a closed canopy, a shrubby understorey and a well-developed ground layer of leaf litter and woody debris. These features were lost on conversion to pasture. While all types of reforestation returned some elements of structural complexity to cleared land, young plantation monocultures, cabinet timber plots and young regrowth had a relatively simple structure. These sites typically had a low density of woody stems, a relatively open canopy and grassy ground cover, and lacked large trees, coarse woody debris and most special life forms. Restoration plantings and old regrowth were more complex, with a high density of woody stems, a relatively closed canopy and shrubby understorey. Old monoculture plantations in the tropics had acquired many of the structural attributes of intact forest, however this was not the case in the subtropics, where plantations were subject to more intensive management. The marked differences in structural complexity between sites suggest that the different types of reforestation practiced in eastern Australia are likely to vary considerably in their value as habitat for rainforest biota. (C) 2003 Elsevier Science B.V. All rights reserved.

Mechanical considerations in fracture fixation

Bone’s capacity to repair following trauma is both unique and astounding. However, fractures sometimes fail to heal. Hence, the goal of fracture treatment is the restoration of bone’s structure, composition and function. Fracture fixation devices should provide a favourable mechanical and biological environment for healing to occur. The use of internal fixation is increasing as these devices may be applied with less invasive techniques. Recent studies suggest however that, internal fixation devices may be overly stiff and suppresses callus formation. The degree of mechanical stability influences the healing outcome. This is determined by the stiffness of the fixation device and the degree of limb loading. This project aims to characterise the fixation stability of an internal plate fixation device and the influence of modifications to its configuration on implant stability. As there are no standardised methods for the determination of fixation stiffness, the first part of this project aims to compares different methodologies and determines the most appropriate method to characterise the stiffness of internal plate fixators. The stiffness of a fixation device also influences the physiological loads experienced by the healing bone. Since bone adapts to this applied load by undergoing changes through a remodelling process, undesirable changes could occur during the period of treatment with an implant. The second part of this project aims to develop a methodology to quantify remodelling changes. This quantification is expected to aid our understanding of the changes in pattern due to implant related remodelling and on the factors driving the remodelling process. Knowledge gained in this project is useful to understand how the configuration of internal fixation devices can promote timely healing and prevent undesirable bone loss.

Room-temperature photoluminescence from nitrogenated carbon nanotips grown by plasma-enhanced hot filament chemical vapor deposition

Nitrogenated carbon nanotips with a low atomic concentration of nitrogen have been synthesized by using a custom-designed plasma-enhanced hot-filament plasma chemical vapor deposition system. The properties (including morphology, structure, composition, photoluminescence, etc.) of the synthesized nitrogenated carbon nanotips are investigated using advanced characterization tools. The room-temperature photoluminescence measurements show that the nitrogenated carbon nanotips can generate two distinct broad emissions located at ∼405 and ∼507 nm, respectively. Through the detailed analysis, it is shown that these two emission bands are attributed to the transition between the lone pair valence and bands, which are related to the sp3 and sp2 C-N bonds, respectively. These results are highly relevant to advanced applications of nitrogenated carbon nanotips in light emitting optoelectronic devices.

Polyacrylic Acid Assisted Synthesis of Cu2ZnSnS4 by Hydrothermal Method

Pure phase Cu2ZnSnS4 (CZTS) nanoparticles were successfully synthesized via polyacrylic acid (PAA) assisted one-pot hydrothermal route. The morphology, crystal structure, composition and optical properties as well as the photoactivity of the as-synthesized CZTS nanoparticles were characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectrometer, UV-visible absorption spectroscopy and photoelectrochemical measurement. The influence of various synthetic conditions, such as the reaction temperature, reaction duration and the amount of PAA in the precursor solution on the formation of CZTS compound was systematically investigated. The results have shown that the crystal phase, morphology and particle size of CZTS can be tailored by controlling the reaction conditions. The formation mechanism of CZTS in the hydrothermal reaction has been proposed based on the investigation of time-dependent phase evolution of CZTS which showed that metal sulfides (e.g., Cu2S, SnS2 and ZnS) were formed firstly during the hydrothermal reaction before forming CZTS compound through nucleation. The band gap of the as-synthesized CZTS nanoparticles is 1.49 eV. The thin film electrode based on the synthesized CZTS nanoparticles in a three-electrode photoelectrochemical cell generated pronounced photocurrent under illumination provided by a red light-emitting diode (LED, 627 nm), indicating the photoactivity of the semiconductor material.

Plasma assisted surface modification of organic biopolymers to prevent bacterial attachment

Despite many synthetic biomaterials having physical properties that are comparable or even superior to those of natural body tissues, they frequently fail due to the adverse physiological reactions they cause within the human body, such as infection and inflammation. The surface modification of biomaterials is an economical and effective method by which biocompatibility and biofunctionality can be achieved while preserving the favorable bulk characteristics of the biomaterial, such as strength and inertness. Amongst the numerous surface modification techniques available, plasma surface modification affords device manufacturers a flexible and environmentally friendly process that enables tailoring of the surface morphology, structure, composition, and properties of the material to a specific need. There are a vast range of possible applications of plasma modification in biomaterial applications, however, the focus of this review paper is on processes that can be used to develop surface morphologies and chemical structures for the prevention of adhesion and proliferation of pathogenic bacteria on the surfaces of in-dwelling medical devices. As such, the fundamental principles of bacterial cell attachment and biofilm formation are also discussed. Functional organic plasma polymerised coatings are also discussed for their potential as biosensitive interfaces, connecting inorganic/metallic electronic devices with their physiological environments.