The use of current transformers for noise detection due to sparking in insulators strings in high voltage transmission lines

In a general way, in an electric power utility the current transformers (CT) are used to measurement and protection of transmission lines (TL) 1 The Power Line Carriers systems (PLC) are used for communication between electrical substations and transmission line protection. However, with the increasing use of optical fiber to communication (due mainly to its high data transmission rate and low signal-noise relation) this application loses potentiality. Therefore, other functions must be defined to equipments that are still in using, one of them is detecting faults (short-circuits) and transmission lines insulator strings damages 2. The purpose of this paper is to verify the possibility of using the path to the ground offered by the CTs instead of capacitive couplings / capacitive potential transformers to detect damaged insulators, since the current transformers are always present in all transmission lines (TL's) bays. To this a comparison between this new proposal and the PLC previous proposed system 2 is shown, evaluating the economical and technical points of view. ©2010 IEEE.

Q parameter scaling in scalar and vector models with dominant signal-noise and noise-noise beating terms

The Q parameter scales differently with the noise power for the signal-noise and the noise-noise beating terms in scalar and vector models. Some procedures for including noise in the scalar model largely under-estimate the Q parameter.

Effect of second order signal-noise interactions in nonlinearity compensated optical transmission systems

In this Letter, we theoretically and numerically analyze the performance of coherent optical transmission systems that deploy inline or transceiver based nonlinearity compensation techniques. For systems where signal-signal nonlinear interactions are fully compensated, we find that beyond the performance peak the signal-to-noise ratio degradation has a slope of 3 dBSNR/dBPower suggesting a quartic rather than quadratic dependence on signal power. This is directly related to the fact that signals in a given span will interact not only with linear amplified spontaneous emission noise, but also with the nonlinear four-wave mixing products generated from signal-noise interaction in previous (hitherto) uncompensated spans. The performance of optical systems employing different nonlinearity compensation schemes were numerically simulated and compared against analytical predictions, showing a good agreement within a 0.4 dB margin of error.

Methods for exploring the morpho-functional relations of the aortic depressor nerve in experimental diabetes

The present study investigated morpho-functional relations of the aortic depressor nerve (ADN) 5, 15 and 120 days after the onset of streptozotocin-induced diabetes in rats. Time control animals received vehicle. Under pentobarbital anesthesia, ADN activity was recorded simultaneously with arterial pressure. After the recordings, nerves were prepared for light microscopy study and morphometry. ADN function was accessed by means of pressure-nerve activity curve (fitted by sigmoidal regression) and cross-spectral analysis between mean arterial pressure (MAP) and ADN activity. The relation between morphological (myelinated fibers number and density, total myelin area, total fiber area and percentage of occupancy) and functional (gain, signal/noise relation, frequency) parameters were accessed by linear regression analysis and correlation coefficient calculations. Functional parameters obtained by means of the sigmoidal regression curve as well as by cross-spectral analysis were similar in diabetic and control rats. Morphometric parameters of the ADN were similar between groups 5 days after the onset of diabetes. Average myelin area and myelinated fiber area were significantly smaller on diabetic rats 15 and 120 days after the onset of diabetes, being the myelinated fiber and respective axons area and diameter also smaller on 120 days group. Nevertheless, G ratio (ratio between axon and fiber diameter) was nearly 0.6 and not different between groups or experimental times. No significant relationship between morphological and functional parameters was detected in all experimental groups. The present study suggests that ADN diabetic neuropathy was time-dependent, with damage to myelinated fibers to be the primary event, not evidenced by physiological methods. (C) 2010 Elsevier B.V. All rights reserved.

Speech intelligibility with and without noise in individuals exposed to electronic music

Audiometry is the main way with which hearing is evaluated, because it is a universal and standardized test. Speech tests are difficult to standardize due to the variables involved, their performance in the presence of competitive noise is of great importance. Aim: To characterize speech intelligibility in silence and in competitive noise from individuals exposed to electronically amplified music. Material and Method: It was performed with 20 university students who presented normal hearing thresholds. The speech recognition rate (SRR) was performed after fourteen hours of sound rest after the exposure to electronically amplified music and once again after sound rest, being studied in three stages: without competitive noise, in the presence of Babble-type competitive noise, in monotic listening, in signal/ noise ratio of + 5 dB and with the signal/ noise ratio of 5 dB. Results: There was greater damage in the SRR after exposure to the music and with competitive noise, and as the signal/ noise ratio decreases, the performance of individuals in the test also decreased. Conclusion: The inclusion of competitive noise in the speech tests in the audiological routine is important, because it represents the real disadvantage experienced by individuals in daily listening.

Statistical signal extraction using stable processes

The standard models for statistical signal extraction assume that the signal and noise are generated by linear Gaussian processes. The optimum filter weights for those models are derived using the method of minimum mean square error. In the present work we study the properties of signal extraction models under the assumption that signal/noise are generated by symmetric stable processes. The optimum filter is obtained by the method of minimum dispersion. The performance of the new filter is compared with their Gaussian counterparts by simulation.

Evaluation of a carbon paste electrode modified with organofunctionalised SBA-15 nanostructured silica in the simultaneous determination of divalent lead, copper and mercury ions

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol in the simultaneous determination of Pb(II), Cu(II) and Hg(II) ions in natural water and sugar cane spirit (cachaca) is described. Pb(II), Cu(II) and Hg(II) were pre-concentrated on the surface of the modified electrode by complexing with 2-benzothiazolethiol and reduced at a negative potential (-0.80 V). Then the reduced products were oxidised by DPASV procedure. The fact that three stripping peaks appeared on the voltammograms at the potentials of -0.48 V (Pb2+), -0.03 V (Cu2+) and +0.36 V (Hg2+) in relation to the SCE, demonstrates the possibility of simultaneous determination of Pb2+, Cu2+ and Hg2+. The best results were obtained under the following optimised conditions: 100 mV pulse amplitude, 3 min accumulation time, 25 mV s(-1) scan rate in phosphate solution pH 3.0. Using such parameters, calibration graphs were linear in the concentration ranges of 3.00-70.0 x 10(-7) mol L-1 (Pb2+), 8.00-100.0 X 10(-7) mol L-1 (Cu2+) and 2.00-10.0 x 10(-6) mol L-1 (Hg2+). Detection limits of 4.0 x 10(-8) mol L-1 (Pb2+), 2.0 x 10(-7) mol L-1 (Cu2+) and 4.0 x 10(-7) mol L-1 (Hg2+) were obtained at the signal noise ratio (SNR) of 3. The results indicate that this electrode is sensitive and effective for simultaneous determination of Pb2+, Cu2+ and Hg2+ in the analysed samples. (C) 2008 Published by Elsevier B.V.

Determinação da qualidade da radiografia digital aplicada às soldas de gasodutos e oleodutos terrestres e marítimos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aproximações hiperbólicas dos tempos de trânsito com topografia

A simulação de uma seção sísmica de afastamento-nulo (AN) a partir de dados de cobertura múltipla pode ser realizada através do empilhamento sísmico, o qual é um método de imageamento de reflexão sísmica muito utilizado na indústria. O processo de empilhamento sísmico permite reduzir a quantidade de dados e melhorar a razão sinal/ruído. Baseado na aproximação hiperbólica dos tempos de trânsito dependente de três parâmetros ou atributos cinemáticos de frentes de onda. Recentemente, vem desenvolvendo-se um novo método para simular seções (AN) chamado método de empilhamento sísmico por Superfície de Reflexão Comum (ou empilhamento SRC). Este novo formalismo pode ser estendido para construir seções de afastamento-nulo (AN) a partir de dados de cobertura múltipla, usando aproximações dos tempos de trânsito paraxiais na vizinhança de um raio central com afastamento-nulo (AN), para o caso de uma linha de medição com topografia suave e rugosa. Essas duas aproximações de tempos de trânsito também dependem de três atributos cinemáticos de frentes de ondas. Nesta dissertação, apresenta-se uma revisão teórica da teoria paraxial do raio para a obtenção das aproximações dos tempos de trânsito paraxiais considerando uma linha de medição com topografia rugosa e suave. A partir das aproximações dos tempos de trânsito paraxiais em relação a um raio central com afastamento-nulo (AN), foram obtidas duas novas aproximações de tempos de trânsito usando a condição de um ponto difrator em profundidade, reduzindo as equações originais para dois parâmetros. Também foram obtidas as aproximações para o caso de raios paraxiais com afastamento-nulo (AN). Para as aproximações de reflexão e difração utilizando um mesmo modelo sintético, foram comparadas através da representação gráfica as superfícies de empilhamento das aproximações dos tempos de trânsito para a topografia suave e rugosa. Em seguida, para analisar o comportamento dos operadores associados a reflexão e a difração, quando estes são perturbados, discutimos suas sensibilidades em relação a cada um dos três parâmetros (β₀, K_PIN, K_N). Esta análise de sensibilidade foi realizada em duas formas: Sensibilidade através da perturbação de cada parâmetro visualizado nas superfícies de empilhamento SRC-TR e SDC-TR e da primeira derivada dos tempos de trânsito SRC-TR e SDC-TR. Finalmente, usando essas aproximações hiperbólicas em função de três e dois parâmetros e com base nos resultados da análise de sensibilidade, foi proposto um algoritmo para simular seções AN a partir de dados de cobertura múltipla.

Characterization and modeling of low-frequency noise in MOSFETs

For many years, RF and analog integrated circuits have been mainly developed using bipolar and compound semiconductor technologies due to their better performance. In the last years, the advance made in CMOS technology allowed analog and RF circuits to be built with such a technology, but the use of CMOS technology in RF application instead of bipolar technology has brought more issues in terms of noise. The noise cannot be completely eliminated and will therefore ultimately limit the accuracy of measurements and set a lower limit on how small signals can be detected and processed in an electronic circuit. One kind of noise which affects MOS transistors much more than bipolar ones is the low-frequency noise. In MOSFETs, low-frequency noise is mainly of two kinds: flicker or 1/f noise and random telegraph signal noise (RTS). The objective of this thesis is to characterize and to model the low-frequency noise by studying RTS and flicker noise under both constant and switched bias conditions. The effect of different biasing schemes on both RTS and flicker noise in time and frequency domain has been investigated.

Medidas de calidad de señales DVB-T

El incremento de la población con acceso a la televisión a mediados del siglo XX hizo necesaria la implantación de una normativa que regulara el acceso a este servicio a través de las infraestructuras comunes de telecomunicación. Estas infraestructuras están formadas por diversos elementos que pueden alterar los parámetros de calidad de la señal de televisión radiodifundida, actualmente bajo norma DVB-T. Normalmente, los diseños de las redes se hacen atendiendo a las atenuaciones que presentan los dispositivos pero sin tener en cuenta la influencia de los mismos sobre los parámetros de calidad de la señal. Por ello, es necesario conocer esta influencia para que, a la hora de diseñar una red, se cumplan no solo los requisitos de nivel de señal en las tomas de usuario sino que también se han de cumplir los requisitos de calidad (MER, relación portadora a ruido, CBER). Para llevar a cabo este estudio, en primer lugar es necesario conocer los equipos de generación y medida de señales DVB-T. El conocimiento de las características de estos equipos, las funciones que pueden realizar y sus limitaciones ayudan a llevar a cabo un buen estudio de los parámetros de calidad de la señal. Posteriormente, se realiza un estudio individual de los elementos utilizados para la construcción de una red de distribución de señal de televisión digital terrestre con el objetivo de comprobar su comportamiento en frecuencia, ya que según los fabricantes su respuesta en frecuencia es plana, y su influencia sobre la calidad de la señal. Además, se utilizarán elementos de distintas características para conocer la influencia de dichas características sobre los parámetros de calidad. Una vez llevado a cabo este estudio individual, se construye una infraestructura común de telecomunicaciones para realizar las medidas necesarias en las tomas de usuario y en puntos intermedios para así conocer cómo empeora la calidad de la señal a lo largo de este tipo de redes. ABSTRACT. The increase in population with access to television services in the middle of the 20th century, made it necessary to set a new rule to regulate this service access through the common telecommunications infrastructures. These infrastructures are composed by different elements which can alter the parameters of quality of the broadcasted television signal, nowadays under DVB-T standard. Networks design are usually made taking into account the loss of each device but without taking into account the influence on the quality parameters of the signal. Because of that, it is necessary to know this influence in order to meet not only the level requirements but also the quality requirements (MER, carrier-to-noise relation, CBER). To carry out this study, it is first necessary to understand the generation and measurement DVB-T signal equipment. The knowledge of the characteristics of these devices, their functions and limitations help to carry out a good study of the signal quality parameters. Subsequently, an individual examination of the elements used to build a distribution network of digital terrestrial television is performed in order to check its frequency dependence, since according to manufacturers’ datasheets the frequency is flat, and its influence on the signal quality parameters. In addition, elements of different characteristics are used to determine the influence of these characteristics on the quality parameters. Once done this single study, a common telecommunications infrastructure is built to perform the necessary measurements at the user points and at intermediate points in order to know how the quality of the signal over this kind of networks.

Transient evoked otoacoustic emissions in two-month-old infants: A normative study

Researchers have recently reported the effects of age, sex, ear asymmetry, and subject's activity status on transient evoked otoacoustic emissions (TEOAEs). The present study aimed to expand upon such reports by describing the characteristics of TEOAE spectra obtained from a cohort of 607 two-month-old infants in community child health clinics. Results indicated significant sex, ear and activity state effects on the signal:noise ratio, response. whole wave and band reproducibility values. These findings suggest the need for TEOAE normative data to be expressed as a function of sex, ear, and activity state of infants. These characteristics of TEOAE spectra may shape future investigations into appropriate pass-fail criteria for two-month-old infants.

Implementação e validação de um método para determinação de contaminantes em vinho por microextração em fase sólida e gc-ms/ms e sua correlação com a análise sensorial

Cada vez mais começa a notar-se, na indústria vitivinícola, uma grande preocupação com a qualidade dos seus produtos, motivada pela maior sensibilização e exigência dos consumidores. Deste modo, a presença de defeitos organoléticos no vinho representa uma fonte de perda financeira nesta indústria, pelo que o seu controlo se torna indispensável para que se obtenha um produto de elevada qualidade. Neste sentido, torna-se interessante desenvolver um método de análise que seja rápido de forma a permitir a quantificação simultânea das moléculas identificadas como principais responsáveis pelos distúrbios olfativos dos vinhos. Assim, este trabalho surge com o objetivo de implementar e validar um método para a determinação de contaminantes em vinho por microextração em fase sólida (SPME) e cromatografia gasosa acoplada à espetrometria de massa tandem (GC-MS/MS) e a sua correlação com a análise sensorial. A técnica de microextração em fase sólida é simples e rápida na medida em que não requer um pré-tratamento da amostra. Por sua vez, a análise por GC-MS permite identificar de forma clara os compostos em estudo, nomeadamente, 4-Etilfenol (4-EP), 4-Etilguaiacol (4-EG), 2,4,6-Tricloroanisol (TCA), 2,3,4,6-Tetracloroanisol (TeCA) e 2,4,6-Tribromoanisol (TBA). Foram realizados estudos de otimização das condições de extração, comparando as fibras 100 μm PDMS e 50/30 μm DVB/CAR/PDMS. Obtiveram-se resultados mais satisfatórios, em termos de resposta e da relação sinal/ruído, com a fibra 50/30 μm DVB/CAR/PDMS e estabeleceram-se como condições de extração 55ºC para a temperatura de incubação/extração, uma velocidade de agitação de 250 rpm e 60 minutos de tempo de extração. Ao longo deste trabalho, analisaram-se 50 amostras de vinho, das quais 48 eram amostras de Vinho Tinto do Douro e 2 de Vinho do Porto. Para validar a metodologia foram realizados estudos de linearidade, limiares analíticos, repetibilidade, precisão intermédia e recuperação. De um modo geral, obtiveram-se bons resultados ao nível da linearidade para as gamas de concentração escolhidas. Quanto aos limites de deteção e de quantificação, o 4-EP é o contaminante que apresenta uma gama de concentrações mais alta, notando-se limiares analíticos mais elevados, com valores próximos dos últimos níveis de concentração, oscilando entre 65 e 583 μg/L. No caso dos Anisóis, o TBA apresenta limites de deteção mais baixos, entre 0,4 e 17,0 ng/L. Os limiares analíticos foram validados com recurso a estudos de precisão intermédia e repetibilidade, cujos resultados se encontram dentro das especificações descritas no documento SANCO/10684/2009 (%RSD ≤ 30% para os Anisóis e %RSD ≤ 20% para os Fenóis Voláteis). Foram, ainda, realizados estudos de exatidão recorrendo a ensaios de recuperação e a ensaios interlaboratoriais. Muitas vezes conseguem-se boas recuperações, no entanto notam-se maiores dificuldades para o TBA e para o TeCA. Relativamente aos ensaios interlaboratoriais, verificam-se maiores discrepâncias para o 4-EP. Já os restantes contaminantes apresentam resultados, geralmente, satisfatórios (|z-score| ≤ 2).