Efeito do sexo e do peso ao abate sobre a produção de carne de cordeiro. I. Velocidade de crescimento, caracteres quantitativos da carcaça, pH da carne e resultado econômico

Realizou-se o presente estudo com o objetivo de avaliar o efeito de sexo (machos inteiros x fêmeas) e de quatro pesos ao abate (28, 32, 36 e 40 kg) sobre o desempenho, os caracteres da carcaça e resultados econômicos de cordeiros mestiços ½ Ile de France x ½ Corriedale, terminados em sistema de confinamento. Quarenta animais (20 machos e 20 fêmeas) foram desmamados aos 60 dias e alimentados à vontade com uma ração contendo 16,46% de PB e 67,63% de NDT. Foram divididos em quatro grupos de machos (G1M, G2M, G3M e G4M) e quatro grupos de fêmeas (G1F, G2F, G3F, e G4F), sacrificados, respectivamente, com os pesos supra citados. Determinaram-se o ganho médio de peso diário (GMPD), o peso do corpo vazio (PCV), os pesos de carcaça quente (PCQ) e fria (PCF), as perdas ao resfriamento (PR), os rendimentos comercial (RC) e verdadeiro (RV) e o pH da carne em três momentos. Observou-se efeito de sexo para GMPD, com superioridade dos machos. Houve efeito de peso ao abate sobre PCQ e PCF e também de sexo, tendo as fêmeas superado os machos em G3 e G4, para PCQ, e em G2, G3 E G4, para PCF. Constataram-se maiores valores de RC e RV para as fêmeas, em G3 e G4. Todos os grupos apresentaram-se similares em relação ao pH da carne, o qual descreveu uma curva dentro dos padrões esperados. O estudo econômico destacou G1M como tendo apresentado melhor conversão alimentar e maior renda líquida/animal. Entre as fêmeas, G1F foi o melhor, destacando-se as rendas líquidas negativas constatadas em G3F e G4F. Concluiu-se que o melhor peso ao abate foi 28 kg, tanto para os machos, como para as fêmeas. No caso dos machos, tolerar-se-ia o peso de 32 kg, apesar de ter propiciado renda líquida 12,8% inferior a G1M.

Estimativas de parâmetros genéticos para características de crescimento e de carcaça em ovinos de corte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Growth and carcass characteristics of cast-for-age Merino ewes fed sorghum-based feedlot diets

Grain feeding low bodyweight, cast-for-age (CFA) sheep from pastoral areas of eastern Australia at the end of the growing season can enable critical carcass weight grades to be achieved and thus yield better economic returns. The aim of this work was to compare growth and carcass characteristics for CFA Merino ewes consuming either simple diets based on whole sorghum grain or commercial feed pellets. The experiment also compared various sources of additional nitrogen (N) for inclusion in sorghum diets and evaluated several introductory regimes. Seventeen ewes were killed initially to provide baseline carcass data and the remaining 301 ewes were gradually introduced to the concentrate diets over 14 days before being fed concentrates and wheaten hay ad libitum for 33 or 68 days. Concentrate treatments were: (i) commercial feed pellets, (ii) sorghum mix (SM; whole sorghum grain, limestone, salt and molasses) + urea and ammonium sulfate (SMU), (iii) SMU + whole cottonseed at 286 g/kg of concentrate dry matter (DM), (iv) SM + cottonseed meal at 139 g/kg of concentrate DM, (v) SMU + virginiamycin (20 mg/kg of concentrate) for the first 21 days of feeding, and (vi) whole cottonseed gradually replaced by SMU over the first 14 days of feeding. The target carcass weight of 18 kg was achieved after only 33 days on feed for the pellets and the SM + cottonseed meal diet. All other whole grain sorghum diets required between 33 and 68 days on feed to achieve the target carcass weight. Concentrates based on whole sorghum grain generally produced significantly (P < 0.05) lower carcass weight and fat score than pellets and this may have been linked to the significantly (P < 0.05) higher faecal starch concentrations for ewes consuming sorghum-based diets (270 v. 72 g/kg DM on day 51 of feeding for sorghum-based diets and pellets, respectively). Source of N in whole grain sorghum rations and special introductory regimes had no significant (P > 0.05) effects on carcass weight or fat score of ewes with the exception of carcass weight for SMU + whole cottonseed being significantly lower than SM + cottonseed meal at day 33. Ewes finished on all diets produced acceptable carcasses although muscle pH was high in all ewe carcasses (average 5.8 and 5.7 at 33 and 68 days, respectively). There were no significant (P > 0.05) differences between diets in concentrate DM intake, rumen fluid pH, meat colour score, fat colour score, eye muscle area, meat pH or meat temperature.

Pen parameters for improving the performance of sheep imported from Australia to Persian Gulf feedlots

Summer in the Persian Gulf region presents physiological challenges for Australian sheep that are part of the live export supply chain coming from the Australian winter. Many feedlots throughout the Gulf have very high numbers of animals during June to August in order to cater for the increased demand for religious festivals. From an animal welfare perspective it is important to understand the necessary requirements of feed and water trough allowances, and the amount of pen space required, to cope with exposure to these types of climatic conditions. This study addresses parameters that are pertinent to the wellbeing of animals arriving in the Persian Gulf all year round. Three experiments were conducted in a feedlot in the Persian Gulf between March 2010 and February 2012, totalling 44 replicate pens each with 60 or 100 sheep. The applied treatments covered animal densities, feed-bunk lengths and water trough lengths. Weights, carcass attributes and health status were the key recorded variables. Weight change results showed superior performance for animal densities of ≥1.2 m2/head during hot conditions (24-h average temperatures greater than 33 °C, or a diurnal range of around 29–37 °C). However the space allowance for animals can be decreased, with no demonstrated detrimental effect, to 0.6 m2/head under milder conditions. A feed-bunk length of ≥5 cm/head is needed, as 2 cm/head showed significantly poorer animal performance. When feeding at 90 ad libitum 10 cm/head was optimal, however under a maintenance feeding regime (1 kg/head/day) 5 cm/head was adequate. A minimum water trough allowance of 1 cm/head is required. However, this experiment was conducted during milder conditions, and it may well be expected that larger water trough lengths would be needed in hotter conditions. Carcass weights were determined mainly by weights at feedlot entry and subsequent weight gains, while dressing percentage was not significantly affected by any of the applied treatments. There was no demonstrated effect of any of the treatments on the number of animals that died, or were classified as unwell. However, across all the treatments, these animals lost significantly more weight than the healthy animals, so the above recommendations, which are aimed at maintaining weight, should also be applicable for good animal health and welfare. Therefore, best practice guidelines for managing Australian sheep in Persian Gulf feedlots in the hottest months (June–August) which present the greatest environmental and physical challenge is to allow feed-bunk length 5 cm/head on a maintenance-feeding program and 10 cm/head for 90 ad libitum feeding, and the space allowance per animal should be ≥1.2 m2/head. Water trough allocation should be at least 1 cm/head with provision for more in the summer when water intake potentially doubles.

Pen parameters for improving the performance of sheep imported from Australia to Persian Gulf feedlots

Summer in the Persian Gulf region presents physiological challenges for Australian sheep that are part of the live export supply chain coming from the Australian winter. Many feedlots throughout the Gulf have very high numbers of animals during June to August in order to cater for the increased demand for religious festivals. From an animal welfare perspective it is important to understand the necessary requirements of feed and water trough allowances, and the amount of pen space required, to cope with exposure to these types of climatic conditions. This study addresses parameters that are pertinent to the wellbeing of animals arriving in the Persian Gulf all year round. Three experiments were conducted in a feedlot in the Persian Gulf between March 2010 and February 2012, totalling 44 replicate pens each with 60 or 100 sheep. The applied treatments covered animal densities, feed-bunk lengths and water trough lengths. Weights, carcass attributes and health status were the key recorded variables. Weight change results showed superior performance for animal densities of ≥1.2 m2/head during hot conditions (24-h average temperatures greater than 33 °C, or a diurnal range of around 29–37 °C). However the space allowance for animals can be decreased, with no demonstrated detrimental effect, to 0.6 m2/head under milder conditions. A feed-bunk length of ≥5 cm/head is needed, as 2 cm/head showed significantly poorer animal performance. When feeding at 90% ad libitum 10 cm/head was optimal, however under a maintenance feeding regime (1 kg/head/day) 5 cm/head was adequate. A minimum water trough allowance of 1 cm/head is required. However, this experiment was conducted during milder conditions, and it may well be expected that larger water trough lengths would be needed in hotter conditions. Carcass weights were determined mainly by weights at feedlot entry and subsequent weight gains, while dressing percentage was not significantly affected by any of the applied treatments. There was no demonstrated effect of any of the treatments on the number of animals that died, or were classified as unwell. However, across all the treatments, these animals lost significantly more weight than the healthy animals, so the above recommendations, which are aimed at maintaining weight, should also be applicable for good animal health and welfare. Therefore, best practice guidelines for managing Australian sheep in Persian Gulf feedlots in the hottest months (June–August) which present the greatest environmental and physical challenge is to allow feed-bunk length 5 cm/head on a maintenance-feeding program and 10 cm/head for 90% ad libitum feeding, and the space allowance per animal should be ≥1.2 m2/head. Water trough allocation should be at least 1 cm/head with provision for more in the summer when water intake potentially doubles.

The effect of supplementing maize stover with cowpea (Vigna unguiculata) haulms on the intake and growth performance of Ethiopian sheep

This study compared the effect of supplementing maize stover (MS) with cowpea (Vigna unguiculata) haulms or commercial concentrate (CC) on feed intake, nutrient digestibility, live weight gain and carcass yield of male Ethiopian Highland sheep. Two cowpea genotypes, 12688 (forage) and IT96D-774 (dual-purpose), were used. A randomised block design was applied with groups of eight sheep, blocked by weight, allocated to one of six treatments; MS ad libitum either unsupplemented or supplemented daily with 150 or 300g dry matter (DM) of either cowpea or CC. MS contained more neutral detergent fibre (NDF), acid detergent fibre (ADF) and lignin than either cowpeas or CC Crude protein (CP) content of the forage-type cowpeas was higher than either dual-purpose or CC, while MS had the lowest CP content Relative to the negative control group, cowpea at either level significantly (P < 0.01) increased both MS intake and total NDF and lignin. Supplementation significantly (P < 0.01) increased nitrogen (N) intakes relative to the negative control, with N intake for CC and dual-purpose cowpea (high level) being similar to the intakes for cowpeas at 150g. N intake with the forage-type cowpea offered at higher levels was significantly (P < 0.01) greater than the other groups. No significant differences (P > 0.01) in MS intake were identified between cowpeas at either level or CC and, although intake level of CC increased, it did not differ significantly from the negative control group. Supplementation significantly (P < 0.01) improved average daily gain, with the negative control group losing weight over the experimental period, and increased final live weight, carcass cold weight and dressing percentage. Supplementation significantly improved the apparent digestibility of DM, organic matter and NDF, with no significant difference found between cowpeas at either level. N retention was negative for sheep offered only MS, but positive with all supplements, with cowpeas improving N retention to a greater extent than CC. Interestingly, N retention/N intake was higher with cowpeas offered at the lower level suggesting an improvement in utilisation efficiency. The results indicate that the supplementation of MS with cowpea enhanced ruminant production through improvements in digestibility and intake. Further, as production improvements associated with the two levels of supplementation did not differ significantly, it is suggested that where limited quantities of cowpea are available, it may be of greater nutritional benefit to offer smaller quantities over an increased number of animal days.

Methods of discard ewes carcass suspension and the quality of meat

Objetivou-se com este trabalho avaliar o método de pendura da carcaça quanto à qualidade da carne ovina. Foram utilizadas 10 ovelhas de descarte com aproximadamente 62 kg de peso corporal. Após abate, esfola, evisceração e retirada da cabeça e das patas, as carcaças foram divididas longitudinalmente em duas partes. Lados alternados das meias carcaças foram pendurados pelo tendão do gastrocnêmico, tratamento 1 (T1) e suspensos pelo osso pélvico (T2) por um período de 24 horas em câmara frigorífica. Posteriormente retirou-se o músculo Semimembranosus de todas as meias carcaças para as análises de qualidade da carne. Os músculos Semimembranosus das carcaças pendurados pelo método de suspensão da pelve apresentou maior maciez que os mesmos músculos das carcaças pendurados pelo tendão do gastrocnêmico, com valores de 1,99 kgf.cm-2 e 3,15 kgf.cm-2, respectivamente. O tratamento 2 obteve menores perdas por cocção da carne que o tratamento 1, com valores médios de 32,14 e 33,44%, respectivamente. Os demais parâmetros de qualidade de carne avaliados não foram influenciados pelo método de suspensão da carcaça. Concluiu-se que o método de suspensão da carcaça, influenciou a maciez e as perdas por cocção da carne, sendo os melhores resultados para as carcaças penduras pelo osso pélvico.

Quantitative and qualitative characteristics of the non-carcass components and the meat of lambs fed sunflower seeds and vitamin E

The objective of this investigation was to evaluate the weight and percentage of the non-carcass components and the mineral content (macro minerals and trace minerals), crude protein, ether extract, moisture and vitamin E of the heart, liver, tongue, lungs, reticulum, kidneys and meat from the longissimus dorsi of lambs in feedlot finishing. Thirty-two non-castrated Ile de France male lambs, fed diets containing sunflower seeds and vitamin E from 15 to 32 kg of body weight were allotted in a completely randomized design in a 2 × 2 factorial arrangement. The weight of the gastrointestinal tract was higher in the lambs fed diets containing vitamin E (10%). No difference was observed in the liver as to the mineral matter, crude protein, ether extract, moisture (2.01; 20.03; 2.39 and 74.78 g/100 g, respectively), the macro minerals and trace minerals, except iron. In the tongue, lungs, reticulum, kidneys and meat there was no in fluence of diets in the studied variables. The liver and the meat presented different values of crude protein (20.01 and 18.34 g/100 g, respectively), and the heart (1.03 mg/100 g) showed a higher content of vitamin E. High contents of manganese, zinc and copper were observed in the liver. The evaluated non-carcass components were nutritionally equal to the sheep meat, once, in addition to their high yield in relation to the body weight at slaughter, the non-carcass components are sources of nutrients.

Postweaning growth of the non-carcass components of Texel crossbred lambs

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Anthelmintic effects of condensed tannins on Trichostrongylus colubriformis in experimentally infected sheep

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Carcass characteristics of feedlot lambs fed crude glycerin contaminated with high concentrations of crude fat

Thirty non-castrated male lambs with 20. ±. 2.3. kg average body weight (BW) were randomly assigned to five treatments consisted of different dietary concentrations of crude glycerin (CG; 0, 3, 6, 9 and 12% on DM basis) to evaluate the effects on performance, carcass and meat quality traits. A quadratic effect was observed for performance (P= 0.04), final BW (P<. 0.01) and hot carcass weight (P<. 0.01). No effects of CG were observed (P>. 0.05) on carcass pH neither on shear-force, cooking loss and ether extract content in longissimus. The inclusion of CG tended to reduce the Zn content in meat (P= 0.09). The data suggests that CG (36.2% of glycerol and 46.5% of crude fat) may be used in diets of finishing lambs with concentrations up to 3% without negative effects on performance and main carcass traits. Moreover, inclusion of CG seems to not affect quality and safety of meat for human consumption. © 2013 Elsevier Ltd.

Genotype effect on carcass and meat quality of lambs finished in irrigated pastures in the semiarid Northeastern Brazil

The aim of this study was to compare four genetic groups of sheep on the carcass and meat quality traits. Thirty-three contemporary and unrelated male lambs, all of single birth were used in the experiment, being thirteen from the Santa Inês (SI) breed, seven from the Brazilian Somali breed (BS), six from the Morada Nova (MN) breed and seven from the ½ Dorper - ½ Morada Nova (F1) crossbreed. The genotypes SI, BS and F1 presented similar performances in relation to hot and cold carcass weights, which values were 10.76±0.53kg and 10.46±0.52kg for SI, 9.20±0.73kg and 8.99±0.71kg for BS, and 9.35±0.73kg and 9.13±0.71kg for F1, respectively. The BS had a better hot carcass yield (47.10±0.88%) and cold carcass yield (46.00±0.87%). Better carcass conformation was observed in SI and F1 (2.73±0.12 and 2.50±0.17, respectively) while the BS presented a better finishing (3.29±0.20). The average for the rib eye area (REA) was 9.94±0.49cm², 8.66±0.67cm², 7.18±0.72cm² and 9.8±0.67cm², and for the carcass compactness index (CCI) it was 0.17±0.01kg/cm, 0.17±0.01kg/cm, 0.11±0.01kg/cm and 0.16±0,01kg/cm, for SI, SB, MN and F1, respectively. There were no significant differences between SI, BS and F1 regarding REA and CCI. Although, in general, the MN presented a relatively lower performance than the other genotypes, this breed had similar carcass yields and fat thickness when compared to SI and F1 and similar conformation and REA in comparison to the BS. Regarding meat quality, no differences were observed between genotypes, except for redness and cooking losses. It is concluded that no one group had a higher or lower performance in all traits analyzed. Moreover, for the management conditions employed in this study, there was evidence of greater specialization in meat production for genotypes SI, BS and F1 when compared to MN, although there are no substantial differences between the four groups regarding meat quality.