Screening of Variables Influencing the Clavulanic Acid Production by Streptomyces DAUFPE 3060 Strain

Clavulanic acid (CA) is a beta-lactam antibiotic, which has a potent beta-lactamase inhibiting activity. The influence of five variables, namely pH (6.0, 6.4, and 6.8), temperature (28A degrees C, 30A degrees C, and 32A degrees C), agitation intensity (150, 200, and 250 rpm), glycerol concentration (5.0, 7.5, and 10 g/L) and soybean flour concentration (5.0, 12.5, and 20 g/L), on CA production by a new isolate of Streptomyces (DAUFPE 3060) was investigated in 250-mL Erlenmeyer flasks using a fractional factorial design. Temperature and soybean flour concentration were shown to be the two variables that exerted the most important effects on the production of CA at 95% confidence level. The highest CA concentration (494 mg/L) was obtained after 48 h at 150 rpm, 32A degrees C, pH 6.0, 5.0 g/L glycerol, and 20 g/L soybean flour concentrations. Under these conditions, the yields of biomass and product on consumed substrate were 0.26 g(X)/g(S) and 64.3 mg(P)/g(S), respectively. Fermentations performed in 3.0-L bench-scale fermenter allowed increasing the CA production by about 60%.

The variety of variables in automated real-time refinement

The refinement calculus is a well-established theory for deriving program code from specifications. Recent research has extended the theory to handle timing requirements, as well as functional ones, and we have developed an interactive programming tool based on these extensions. Through a number of case studies completed using the tool, this paper explains how the tool helps the programmer by supporting the many forms of variables needed in the theory. These include simple state variables as in the untimed calculus, trace variables that model the evolution of properties over time, auxiliary variables that exist only to support formal reasoning, subroutine parameters, and variables shared between parallel processes.

Clustering of variables with a three-way approach for health sciences

TPM Vol. 21, No. 4, December 2014, 435-447 – Special Issue © 2014 Cises.

Influence of variables on centrifuge-flotation technique for recovery of Toxocara canis eggs from soil

The purpose of this study was to evaluate the influence of variables in a flotation technique for the recovery of Toxocara canis eggs from soil. The trials were done under standardized conditions on one gram of previously sterilized soil samples contaminated with 200 eggs of T. canis. The following variables were evaluated in serial steps: sieving; type of wash; time of stirring; resuspension of sediment; solution flotation. Centrifuge-flotation in sodium nitrate (d = 1.20 g/cm³) was adopted as an initial technique, using Tween 80 (0.2%) and decinormal sodium hydroxide as solutions for washing the samples. Ten tests were done to compare the variables, using counting in triplicate. The sieving of the material reduced significantly the recovery of eggs (p < 0.001) and the number of eggs recovered was higher when the sediment was resuspended (p < 0.05). After standardization, flotation solutions sodium chloride, zinc sulfate, sodium dichromate, magnesium sulfate, and sodium nitrate (d = 1.20g/cm³) were compared. The best results were obtained by using zinc sulfate solution. In conclusion, the chances of recovering T. canis eggs from samples using flotation solutions can be increased by washing of soil twice using distilled water, and resuspension of sediment. On the other hand, the sieving procedure can drastically reduce the number of eggs.

Effect of variables on the thickness of an edible coating applied on frozen fish establishment of the concept of safe dipping time

Glazing is a technique used to retard fish deterioration during storage. This work focuses on the study of distinct variables (fish temperature, coating temperature, dipping time) that affect the thickness of edible coatings (water glazing and 1.5% chitosan) applied on frozen fish. Samples of frozen Atlantic salmon (Salmo salar) at -15, -20, and -25 °C were either glazed with water at 0.5, 1.5 or 2.5 °C or coated with 1.5% chitosan solution at 2.5, 5 or 8 °C, by dipping during 10 to 60 s. For both water and chitosan coatings, lowering the salmon and coating solution temperatures resulted in an increase of coating thickness. At the same conditions, higher thickness values were obtained when using chitosan (max. thickness of 1.41±0.05 mm) compared to water (max. thickness of 0.84±0.03 mm). Freezing temperature and crystallization heat were found to be lower for 1.5% chitosan solution than for water, thus favoring phase change. Salmon temperature profiles allowed determining, for different dipping conditions, whether the salmon temperature was within food safety standards to prevent the growth of pathogenic microorganisms. The concept of safe dipping time is proposed to define how long a frozen product can be dipped into a solution without the temperature raising to a point where it can constitute a hazard.

Temperamental Dimension and Anxiety Problems in a Clinical Sample of Three- to Six-year old Children: A Study of Variables

In the last few years, many researchers have studied the presence of common dimensions of temperament in subjects with symptoms of anxiety. The aim of this study is to examine the association between temperamental dimensions (high negative affect and activity level) and anxiety problems in clinicalpreschool children. A total of 38 children, ages 3 to 6 years, from the Infant and Adolescent Mental Health Center of Girona and the Center of Diagnosis and Early Attention of Sabadell and Olot were evaluated by parents and psychologists. Their parents completed several screening scales and, subsequently, clinical child psychopathology professionals carried out diagnostic interviews with children from the sample who presented signs of anxiety. Findings showed that children with high levels of negative affect and low activity level have pronounced symptoms of anxiety. However, children with anxiety disorders do not present different temperament styles from their peers without these pathologies

Analysis of variables that are not directly observable: influence on decision-making during the research process

The sample dimension, types of variables, format used for measurement, and construction of instruments to collect valid and reliable data must be considered during the research process. In the social and health sciences, and more specifically in nursing, data-collection instruments are usually composed of latent variables or variables that cannot be directly observed. Such facts emphasize the importance of deciding how to measure study variables (using an ordinal scale or a Likert or Likert-type scale). Psychometric scales are examples of instruments that are affected by the type of variables that comprise them, which could cause problems with measurement and statistical analysis (parametric tests versus non-parametric tests). Hence, investigators using these variables must rely on suppositions based on simulation studies or recommendations based on scientific evidence in order to make the best decisions.

Localized prostate cancer in Norway, the United States, and Spain: between-country differences of variables before treatment among patients eligible for curative treatment

Between-country differences in medical and sociodemographic variables, and patient-related outcomes (PROs) before treatment might explain published variations of side effects after radical prostatecomy (RP) or radiotherapy (RAD) for prostate cancer (PCa). This hypothesis was tested among 1908 patients from the United States, Spain, and Norway. Significant between-country differences were observed for most factors investigated before treatment. The observations should be considered in comparison of the frequency and severity of internationally published studies. Background: In men with PCa, large variations of PROs after RP or high-dose RAD might be related to betweencountry differences of medical and sociodemographic variables, and differences in PROs before treatment in the sexual and urinary domains. Patients and Methods: In 1908 patients with localized PCa from Norway, the United States, or Spain, the relation between medical (prostate-specific antigen, Gleason score, cT-category) and sociodemographic variables (age, education, marital status) before treatment was investigated. Using the Expanded Prostate Cancer Index Composite questionnaire, PROs before treatment within the sexual and urinary domains were also considered. Results: Compared with the European patients, American patients were younger, fewer had comorbid conditions, and more had a high education level. Fifty-three percent of the US men eligible for RP had low-risk tumors compared with 42% and 31% among the Norwegian and the Spanish patients, respectively. Among the Spanish RAD patients, 54% had had low-risk tumors compared with 34% of the American and 21% of the Norwegian men planned for RAD, respectively. Compared with the European patients, significantly fewer US patients reported moderate or severe sexual dysfunction and related problems. In most subgroups, the number of patients with sexual or urinary dysfunction exceeded that of patients with bother related to the reported dysfunction. Conclusion: Statistically significant between-country differences were observed in medical and sociodemographic variables, and in PROs before treatment within the sexual and urinary domains. Large differences between reported dysfunction and related problems within the sexual and urinary domains indicate that dysfunction and bother should be reported separately in addition to calculation of summary scores. The documented differences, not at least regarding PROs, might in part explain the large variation of side effects after treatment evident in the medical literature

Temperamental Dimension and Anxiety Problems in a Clinical Sample of Three- to Six-year old Children: A Study of Variables

In the last few years, many researchers have studied the presence of common dimensions of temperament in subjects with symptoms of anxiety. The aim of this study is to examine the association between temperamental dimensions (high negative affect and activity level) and anxiety problems in clinical preschool children. A total of 38 children, ages 3 to 6 years, from the Infant and Adolescent Mental Health Center of Girona and the Center of Diagnosis and Early Attention of Sabadell and Olot were evaluated by parents and psychologists. Their parents completed several screening scales and, subsequently, clinical child psychopathology professionals carried out diagnostic interviews with children from the sample who presented signs of anxiety. Findings showed that children with high levels of negative affect and low activity level have pronounced symptoms of anxiety. However, children with anxiety disorders do not present different temperament styles from their peers without these pathologies

A study of variables that may influence continued placement in schools for the deaf

This paper reviews variables that influence placement of a hearing impaired child into a special education program instead of being mainstreamed into a public school.

A study of variables influencing placement in schools for hearing

This paper reviews mainstreaming of former students of CID, 1965-1975.

Strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem

This paper proposes strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem (TEP). The concept of the binary numeral system (BNS) is used to reduce the number of binary and continuous variables related to the candidate transmission lines and network constraints that are connected with them. The construction phase of greedy randomized adaptive search procedure (GRASP-CP) and additional constraints, obtained from power flow equilibrium in an electric power system are employed for more reduction in search space. The multistage TEP problem is modeled like a mixed binary linear programming problem and solved using a commercial solver with a low computational time. The results of one test system and two real systems are presented in order to show the efficiency of the proposed solution technique. © 1969-2012 IEEE.