Implantation failures: Success of assisted hatching with quarter-laser zona thinning

Implantation failure after IVF is one of the factors associated with a reduced chance of pregnancy for some patients. Assisted hatching methodologies are designed to facilitate the embryo's escape from the zona pellucida, and this strategy has been suggested as a means of improving pregnancy rates in patients with previous implantation failure. The aim of this prospective and randomized study was to evaluate the efficacy of quarter-laser zona thinning assisted hatching (qLZT-AH) in improving the implantation of embryos in patients with previous implantation failure. A total of 150 patients with a history of previous implantation failure were treated with intracytoplasmic sperm injection, and allocated into two groups: group 1, only one previous implantation failure, and group 2, repeated implantation failures. The patients in each group were randomized at the time of embryo transfer into a control group (no qLZT-AH) or experimental group where qLZT-AH was performed. For patients with repeated implantation failures, the implantation rate in those who received laser-thinned embryos was significantly higher (P=0.02) than in those whose embryos were not laser-thinned (10.9 and 2.6% respectively). However, this difference was not observed in patients who presented with only one previous implantation failure. The data demonstrate that qLZT-AH is an effective strategy for improving the implantation of embryos in patients with repeated implantation failures.

Laser-assisted hatching of cryopreserved-thawed embryos by thinning one quarter of the zona

Laser-assisted hatching is little documented in the literature regarding its efficacy in cryopreserved-thawed (CT) embryo transfer cycles. The aim of the present study was to evaluate in a randomized manner the efficacy of thinning one quarter of the zona pellucida of CT embryos to a depth of 50-80% of the original thickness, via laser treatment (the qLZT-AH procedure), in improving implantation and pregnancy rates. Two populations were studied: population I, patients who had all their supernumerary embryos cryopreserved, regardless of their morphology, and population II, patients at risk of ovarian hyperstimulation syndrome who had all their embryos cryopreserved. Artificial and natural protocols were used for the embryo transfers. A total of 350 laser-thinned CT embryos were compared with 352 intact zona embryos. No difference in implantation or pregnancy rate was found after using qLZT-AH in either population. These findings suggest that qLZT-AH should not be routinely performed in cryopreserved embryo programmes.

Zona thinning with a noncontact diode laser in ICSI embryos from women of advanced age

Purpose: the objective of this study was to determine if the zona thinning (ZT) technique improved the rates of implantation and clinical pregnancy for patients aged, greater than or equal to38 years submitted to an ICSI program.Methods: A total of 100 patients submitted to ICSI and aged, greater than or equal to38 years were divided in a prospective and randomized manner into two groups: Group I - patients submitted to ZT (n = 50); a laser diode with 1.48 mum wavelength (Fertilaser) was used for the ZT procedure with 1-2 irradiations of 10 ms applied to four different positions on the zona pellucida (ZP) of each embryo to thin 60-90% of the ZP (each point with a 15-20 mum length of ZT). Group II - patients with no ZT (n = 50). In both groups, embryo transfer was performed on the second or third day.Results: the age of Group I patients (39.8 +/- 1.3) did not differ (p = 0.67) from that of Group II patients (40 +/- 1.9). The number of oocytes retrieved at metaphase II from Group I (6.4 +/- 4.2) and Group II (6.8 +/- 5) was similar (p = 0.94). Normal fertilization rates and cleavage rates were similar (p = 0.78 and p = 0.63, respectively) for Group I (71.5 +/- 22% and 96.7 +/- 11%) and Group II (73.5 +/- 19.7% and 96 +/- 11%, respectively). The number of embryos transferred was similar (p = 0.53) for the two groups (Group I = 3.1 +/- 1.3; Group II = 2.9 +/- 1.1). The thickness of the ZP of Group I embryos (16.9 +/- 2.4 mum) did not differ (p = 0.97) from that of Group II embryos (16.9 +/- 2.3 mum). The rates of embryo implantation and clinical pregnancy per embryo transfer were similar (p = 0.67, p = 0.61) for Group I (7 and 16%, respectively) and for Group II (8.2 and 22%, respectively).Conclusions: These results suggest that ZT in the population aged, 38 years may have no impact on ICSI success rates. However, this conclusion is limited to a situation in which length of the laser ZT was less than or equal to 20 mum and the laser was applied to four different positions.

Non-contact microdrilling of mouse zona pellucida with an objective-delivered 1.48-microns diode laser.

BACKGROUND and OBJECTIVE: A non-touch laser-induced microdrilling procedure is studied on mouse zona pellucida (ZP). STUDY DESIGN/MATERIALS and METHODS: A 1.48-microns diode laser beam is focused in a 8-microns spot through a 45x objective of an inverted microscope. Mouse zygotes, suspended in a culture medium, are microdrilled by exposing their ZP to a short laser irradiation and allowed to develop in vitro. RESULTS: Various sharp-edged holes can be generated in the ZP with a single laser irradiation. Sizes can be varied by changing irradiation time (3-100 ms) or laser power (22-55 mW). Drilled zygotes present no signs of thermal damage under light and scanning electron microscopy and develop as expected in vitro, except for a distinct eight-shaped hatching behavior. CONCLUSION: The microdrilling procedure can generate standardized holes in mouse ZP, without any visible side effects. The hole formation can be explained by a local photothermolysis of the protein matrix.

Construção de uma base de dados espectral (IV) de toners de impressoras laser para identificação forense de documentos

Esta dissertação surgiu com o objectivo de se criar uma base de dados de Toners para impressoras e fotocopiadoras e um método fiável de comparação de espectros para estudos forenses e de investigação criminal. Para viabilizar o estudo, efectuou-se à priori a recolha de várias amostras de Toners, de diferentes marcas, de cartuchos originais e remanufacturados aplicando de seguida dois métodos de análise distintos: a Espectroscopia de infravermelho com transformada de Fourier (FT-IR) e a Espectroscopia de Absorção-Reflexão (ATR - Reflectância total atenuada). A espectroscopia FT-IR permitiu obter a base de dados de espectros em suporte KBr e usando o software OPUS, das várias amostras de Toners dos cartuchos originais e remanufacturados recolhidas. Para se criar o método de comparação entre espectros, realizou-se o mesmo procedimento mas agora para amostras obtidas por raspagem de um papel impresso /quadrados 2x2), bem como para o papel de impressão para se poder descontar este da amostra. Dado que o interesse desta análise se remetia ao estudo de textos escritos, efectuou-se a análise de um texto padrão por Espectroscopia FT-IR. O método foi utilizado à posteriori como método de comparação e uma alternativa (não destrutiva) ao método de FT-IR para se aplicar a casos reais. Os espectros foram obtidos num microscópio usando o silício como acessório ATR e o software OMNIC. Finalizado o estudo pode-se concluir, quanto à espectroscopia FT-IR, que as amostras da marca HP e Minolta apresentaram espectros muito semelhantes, quando se faz uma análise global dos mesmos. No entanto, as restantes marcas são também muito parecidas entre si, mas ainda é possível encontrar algumas distinções quando se efectua a comparação visual principalmente abaixo da zona de impressão digital (<6000 cm-1). Relativamente aos Toners remanufacturados, constata-se que são muito semelhantes e que diferem da marca original apenas pelo elevado grau de humidade que possuem. No que diz respeito ao método ATR, verificou-se que apesar de ser um método não destrutivo da amostra revela-se bastante limitado, devido ao uso do cristal de Silício como acessório que só atinge comprimentos de onda entre 4000-1500cm-1.

Laser welding of shape memory alloys

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

Optimização da focagem de feixes laser em tecidos biológicos: desenvolvimento de um simulador óptico

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Biomédica

Krypton laser photocoagulation induces retinal vascular remodeling rather than choroidal neovascularization.

The purpose of this study is to analyze the retina and choroid response following krypton laser photocoagulation. Ninety-two C57BL6/Sev129 and 32 C57BL/6J, 5-6-week-old mice received one single krypton (630 nm) laser lesion: 50 microm, 0.05 s, 400 mW. On the following day, every day thereafter for 1 week and every 2-3 days for the following 3 weeks, serial sections throughout the lesion were systematically collected and studied. Immunohistology using specific markers or antibodies for glial fibrillary acidic protein (GFAP) (astrocytes, glia and Muller's cells), von Willebrand (vW) (vascular endothelial cells), TUNEL (cells undergoing caspase dependent apoptosis), PCNA (proliferating cell nuclear antigen) p36, CD4 and F4/80 (infiltrating inflammatory and T cells), DAPI (cell nuclei) and routine histology were carried out. Laser confocal microscopy was also performed on flat mounts. Temporal and spatial observations of the created photocoagulation lesions demonstrate that, after a few hours, activated glial cells within the retinal path of the laser beam express GFAP. After 48 h, GFAP-positive staining was also detected within the choroid lesion center. "Movement" of this GFAP-positive expression towards the lasered choroid was preceded by a well-demarcated and localized apoptosis of the retina outer nuclear layer cells within the laser beam path. Later, death of retinal outer nuclear cells and layer thinning at this site was followed by evagination of the inner nuclear retinal layer. Funneling of the entire inner nuclear and the thinned outer nuclear layers into the choroid lesion center was accompanied by "dragging" of the retinal capillaries. Thus, from days 10 to 14 after krypton laser photocoagulation onward, well-formed blood capillaries (of retinal origin) were observed within the lesion. Only a few of the vW-positive capillary endothelial cells stained also for PCNA p36. In the choroid, dilatation of the vascular bed occurred at the vicinity of the photocoagulation site and around it. Confocal microscopy demonstrates that the vessels throughout the path lesion are located within the neuroretina while in the choroid (after separation of the neural retina) only GFAP-positive but no lectin-positive cells can be seen. The involvement of infiltrating inflammatory cells in these remodeling and healing processes remained minimal throughout the study period. During the 4 weeks following krypton laser photocoagulation in the mouse eye, processes of wound healing and remodeling appear to be driven by cells (and vessels) originating from the retina.

Correlation of the Roughometer to the High-Speed Laser Profiler, MLR-97-7, 1997

The Iowa Department of Transportation has been using the Bureau of Public Roads (BPR) Roughometer as part of its detour analysis process for more than 20 years. Advances in technology have made the BPR Roughometer obsolete for ride quality testing. High-speed profilers that can collect the profile of the road at highway speeds are the standard ride instruments for determining ride quality on pavements. The objective of the project was to develop a correlation between the BPR Roughometer and the high-speed laser South Dakota type Profiler (SD Profiler). Nineteen pavement sections were chosen to represent the range of types and conditions for detours. Three computer simulation models were tested on the profiler profiles. The first model is the International Ride Index (IRI) which is considered the standard index for reporting ride quality in the United States. The second model is the Ride Number (RN) developed by the University of Michigan Transportation Research Institute and the third model used is a quarter-car simulation of the BPR Roughometer (ASTM E-1170) which should match the speed and range of roadway features experienced by Iowa's BPR Roughometer Unit. The BPR Roughometer quarter-car model provided the best overall correlation with Iowa's BPR Roughometer.

Economic analysis of an agrosilvipastoral system for a mountainous area in Zona da Mata Mineira, Brazil

The objective of this work was to evaluate the economic viability of an agrosilvipastoral system developed for Zona da Mata mountainous areas in Minas Gerais state, Brazil, as well as to compare different options for wood (Eucalyptus grandis and Acacia mangium) commercialization of the second thinning. The data were obtained from a 10 year-old agrosilvipastoral system established in four hectares at Embrapa Gado de Leite station in Coronel Pacheco, MG, Brazil. As evaluation criteria for the economic viability analysis, the adopted methods were the net present value (NPV) and the internal rate of return (IRR), both calculated at 6% interest rate. Despite the small difference, adding value to forest products increased the attractiveness of the proposed system. Considered separately, the agricultural activity was impracticable, whereas the forestry and livestock activities were independently viable. The studied system seems to be equally tolerant to price variations for forest and livestock products, as well as strongly tolerant to variations in production costs.

Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes

Foram realizados estudos para avaliar a microestrutura, a dureza e a resistência à corrosão do titânio comercialmente puro-Ti c.p. soldado por laser e utilizado na confecção de prótese sobre implantes. Verificou-se que na soldagem a laser a microestrutura apresentou três regiões distintas: o cordão de solda, a zona afetada pelo calor - ZAC e o metal base. O Ti c.p. possui microestrutura granular, a microestrutura do cordão de solda é mais refinada e de maior dureza do que o metal base. A ZAC obtida por este processo de soldagem foi relativamente pequena quando comparada com o processo de soldagem por brasagem. Os ensaios eletroquímicos mostraram que a região da solda apresentou menor resistência à corrosão em meio de NaCl 0,15 molL-1 à temperatura ambiente.

Vaporização a laser do cervix para tratamento da neoplasia intraepitelial cervical

O câncer cérvico-uterino é muito comum em vários países da América Latina. As estatísticas de mortalidade e as taxas de incidência demonstram a sua real importância. O cânver cérvico-uterino freqüentemente é uma doença progressiva iniciada com mudanças intra-epiteliais, que podem se transformar em um processo invasivo, sendo o nosso objetivo tratar precocemente estas lesões quando ainda é possível a cura de 100%. Em nosso estudo prospectivo foram selecionadas 21 pacientes com neoplasia cervical intra-epitelial reatreadas pela citplogia e diagnosticadas pela histopatologia após biópsia dirigida pela colposcopia. O método terapêutico empregado foi a vaporização a laser com o CO2. Tiveram como pré-requisito os seguintes critérios: informação segura pela colposcopia da zona de transformação e afastar a presença de câncer invasivo; a neoplasia epitelial cervical deve ocupar a ectocervix sem nenhuma extensão para o canal cervical e correlação positiva entre a citologia, colposcopia e histologia. O uso de laser CO2 com microscópio permitiu precisão na aplicação e com vantagens de ser um procedimento ambulatorial diminuindo estresse cirúrgico das pacientes. Foi realizado sem anestesia e com duração média de 15 minutos. A cicatrização completou-se em torno de três semanas e com cuidados operatórios mínimos. Somente dois casos tiveram sangramento vaginal discreto no quinto e décimo dia de pós-operatório, resolvido com tamponamento vaginal por 24 horas. A colposcopia, cirurgia e o seguimento foram feitos pelo autor, tendo uma paciente sido submetida a uma segunda vaporização no quinto mês de controle. Somente uma paciente teve recidiva no 26° mês de seguimento e complementará o tratamento. As vinte outras restantes estão em controle sem recidiva de doença. Em vista dos resultados obtivemos um percentual de cura de 95%, que coincide com a literatura. O uso de laser CO2 no tratamento das neoplasias cervicais intra-epiteliais (NIC) ou virais tem sido estimulado como uma alternativa digna de ser seguida pelas seguintes razões: cirurgia de não contato, tratamento rápido e indolor, diminuição das custas da internação; complicações mínimas e sem efeito subseqüente sobre a fertilidade e competência cervical, menor necrose térmica, e possibilidade de novo tratamento ambulatorial. Por estas razões e pelo alto percentual de cura podemos concluir que a cirurgia proposta foi vantajosa para o tratamento da neoplasia cervical intra-epitelial, quando comparada com outros métodos de tratamento.

Eletroforese capilar de zona

A aplicação de uma diferença de potencial entre os extremos de um capilar de material dielétrico, preenchido com solução aquosa, provoca um fluxo eletroosmótico através deste. As moléculas, de um pequeno volume de uma amostra injetada neste fluxo, se separam umas das outras devido a diferença entre suas mobilidades eletroforéticas. Este método de separação é conhecido como Eletroforese Capilar. Ele tem se mostrado muito eficiente na separação de moléculas orgânicas complexas e é um método complementar à Cromatografia Líquida. Os sistemas de detecção mais comumente utilizados são do tipo eletroquímico ou ópticos, estes últimos podem ser de absorção ou fluorimétricos. Alta sensibilidade tem sido obtida com sistemas de detecção com fluorescência induzida a lazer, como o de Argônio, Hélio-Cádmio e de semicondutor. Neste trabalho testamos o desempenho de um laser ultravioleta pulsado, usando o mini-laser de N2 (337 nm), para induzir a fluorescência em moléculas marcadas com marcadores moleculares fluorogênicos apropriados. Para aminoácidos obtivemos limites de detecção da ordem de alguns attomóis(10-18 mol).Em condições otimizadas a quantidade mínima detectável de melatonina e serotonina, usando o marcador molecular fluorogênico isotiocianato de fluoresceÍna, foi de 150 attomóis, que corresponde a um limite de detecção em concentração de 50 nM. Os peptídeos bradicinina, lisil-bradicinina e metionil-lisil-bradicinina foram separados entre si e detectados no limite de detecção em concentração de 1,2 fmóis quando marcados com fluorescamina e a 90 attomóis quando com orto"ftaldialdeído. Do nosso conhecimento, esta é a primeira vez que um laser pulsado (N2) é usado num sistema de detecção de eletroforese capilar.

Zona adensável de Ponta Negra em Natal/ RN: as conseqüências decorrentes da lei complementar 27/2000 na visão dos moradores da área

The quarrel on the urban intensific use of determined areas of the city is carried through in some levels of the society, which had to the fact to bring direct influences the population that inhabits it. The question to become an area to intensific use, implies in determining that the local infrastructure has the capacity to take care of to a bigger amount of people, inhabitants or passers-by. In the quarter of Ponta Negra, in Natal city (state of RN), its condition of area to intensific use to the municipal Law 27/2000 happened due that it starts to allow a bigger level of occupation of part of the quarter. This law has a direct relation with the installation of a complementary infrastructure in the quarter, to put does not send to its complementation and maintenance, what it takes the consequences that are felt by the population. This work has as main objective the identification of the decurrent significant consequences of the creation of Ponta Negra s Intensific Use Zone, according to vision of the population of the quarter. The way followed for this involves the compatible bibliography research with the subject, analysis of documents that treat on the quarter, mappings of the area in search of a physical characterization and mainly, an application of questionnaire next to local population. In this questionnaire it is the main point of the necessary collection of data to the work, indicating the point of view of the population not only on the negative points, but also on the positive points that had happened since the creation of Intensific Use Zone. The answers indicate problems of natures social, infrastructure and enviromental, compatible with the problems of other areas that had passed the same for process, as point the studied bibliography, indicating imperfections in the planning process and maintenance of Ponta Negra s Intensific Use Zone

Estudo da circulação hidrodinâmica e da dispersão de óleo na zona costeira entre Macau e Galinhos RN

This paper presents a study on coastal hydrodynamics and the spread of an oil spill in waters off Macau and Galinhos, on the east coast of the state of Rio Grande do Norte in Northeast Brazil. This area has a very marked coastal dynamic owing to the complexity of its geomorphological features, developed in a regime of semidiurnal mesotides involving reefs, spits, estuaries, mangroves, lakes and dunes. The region also plays an important role in the socioeconomic development of the state, given that the production of oil, natural gas, salt and shrimp is concentrated there. The series of oil platforms is interconnected by a pipeline system that carries oil to the local terminal. This pipeline could leak at any moment, causing immense ecological damage. To gauge the risks of an oil leak and resulting contamination of the coastal region, two hydrodynamic scenarios were simulated. The results obtained were used to implement a contaminant transport model with the creation of various oil leak scenarios modeled at different volumes (from small to large) and intensities (sporadic and continuous), at points considered critical for the model (on two platforms and at two pipeline intersections), under different wind (summer and winter) and tidal (high and low at new, full and quarter moon phases) conditions. The use of hydrodynamic circulation computer models as a tool for representing a real project design has been increasingly frequent in recent years, given that they enable the realistic simulation of the hydrodynamic circulation pattern in bodies of water and an analysis of the impacts caused by contaminants released into the water. This study used the computer models contained in SisBAHIA®, in continuous development in the area of Coastal Engineering and Oceanography at COPPE/UFRJ