Process Capability Indexes Determination on Tabletting Performance during the Process Validation for Metamizol Tablets

The aim of the present study was to provide a numerical measure, through the process capability indexes (PCIs), C(p) and C(pk), on whether or not the manufacturing process can be considered capable of producing metamizol (500 mg) tablets. They were also used as statistical tool in order to prove the consistency of the tabletting process, making sure that the tablet weight and the content uniformity of metamizol are able to comply with the preset requirements. Besides that, the ANOVA, the t-test and the test for equal variances were applied to this study, allowing additional knowledge of the tabletting phase. Therefore, the proposed statistical approach intended to assure more safety, precision and accuracy on the process validation analysis.

Shewhart's control charts and process capability ratio applied to a sewage treatment station

The current study used statistical methods of quality control to evaluate the performance of a sewage treatment station. The concerned station is located in Cascavel city, Paraná State. The evaluated parameters were hydrogenionic potential, settleable solids, total suspended solids, chemical oxygen demand and biochemical oxygen demand in five days. Statistical analysis was performed through Shewhart control charts and process capability ratio. According to Shewhart charts, only the BOD(5.20) variable was under statistical control. Through capability ratios, we observed that except for pH the sewage treatment station is not capable to produce effluents under characteristics that fulfill specifications or standard launching required by environmental legislation.

Estudo e melhoria da capacidade de um processo industrial de panificação

Esta dissertação apresenta um estudo da capacidade do processo inserido uma empresa de panificação. Antes de iniciar o estudo propriamente dito, foi realizada uma calibração à balança na qual este estudo seria realizado. Os índices de capacidade do processo têm como principal finalidade verificar se a média e a variabilidade do processo estão em concordância com o alvo e os limites de especificação. Esta verificação permite o ajustamento do processo de maneira a reduzir a produção de produtos defeituosos. Neste trabalho foram utilizados os índices de capacidade considerando que as condições são ideais, isto é, quando existe normalidade nas amostras. Quando as condições não são ideais, como foi verificado, foram utilizadas técnicas para o cálculo dos índices de capacidade para este tipo de situações. A aplicação da metodologia de análise da capacidade do processo foi realizada com sucesso com recurso a amostras retiradas numa balança calibrada para o efeito.

Economical analysis for investment on measuring systems

Metrology processes contribute to entire manufacturing systems that can have a considerable impact on financial investment in coordinate measuring systems. However, there is a lack of generic methodologies to quantify their economical value in today’s industry. To solve this problem, a mathematical model is proposed in this paper by statistical deductive reasoning. This is done through defining the relationships between Process Capability Index, measurement uncertainty and tolerance band. The correctness of the mathematical model is proved by a case study. Finally, several comments and suggestions on evaluating and maximizing the benefits of metrology investment are given.

CRITICAL POINTS OF THE PRODUCTION PROCESS OF SOLID WOOD FLOORING

The quality concepts represent one of the important factors for the success of organizations and among these concepts the stabilization of the production process contributes to the improvement, waste reduction and increased competitiveness. Thus, this study aimed to evaluate the production process of solid wood flooring on its predictability and capacity, based on its critical points. Therefore, the research was divided into three stages. The first one was the process mapping of the company and the elaboration of flowcharts for the activities. The second one was the identification and the evaluation of the critical points using FMEA (Failure Mode and Effect Analysis) adapted methodology. The third one was the evaluation of the critical points applying the statistical process control and the determination of the process capability for the C-pk index. The results showed the existence of six processes, two of them are critical. In those two ones, fifteen points were considered critical and two of them, related with the dimension of the pieces and defects caused by sandpaper, were selected for evaluation. The productive process of the company is unstable and not capable to produce wood flooring according to the specifications and, therefore these specifications should be reevaluated.

Is more capability always beneficial for firm performance? Market orientation, core business process capabilities, and business environment

This study examines the role of capabilities in core marketing-related business processes–product development management (PDM), supply chain management (SCM) and customer relationship management (CRM)–in translating a firm’s market orientation (MO) into firm performance. The study is the first to examine the interplay of all three business process capabilities simultaneously, while investigating how environmental conditions moderate their performance effects. A moderated mediation analysis of 468 product-focused firms finds that PDM and CRM process capabilities play important mediating roles, whereas SCM process capability does not mediate the relationship between MO and performance. However, the relative importance of the capabilities as mediators varies along the degree of environmental turbulence, and under certain conditions, an increase in the level of business process capability may even turn detrimental.

Understanding Recreational Services of Urban Riverfront Space for Planning Purposes

In the process of urbanization, natural and semi-natural landscapes are increasingly cherished as open space and recreational resource. Urban rivers are part of this kind of resource and thus play an important role in managing urban resilience and health. Employing the example of Tianjin, this doctoral dissertation research aims at learning to understand how to plan and design for the interface zones between urban water courses and for the land areas adjacent to such water courses. This research also aims at learning how to link waterfront space with other urban space in order to make a recreational space system for the benefit of people. Five questions of this dissertation are: 1) what is the role of rivers in spatial and open space planning? 2) What are the human needs regarding outdoor open space? 3) How do river and water front spatial structures affect people's recreational activities? 4) How to define the recreational service of urban river and waterfront open space? 5) How might answering these question change planning and design of urban open space? Quantitative and qualitative empirical approaches were combined in this study for which literature review and theoretical explorations provide the basis. Empirical investigations were conducted in the city of Tianjin. The quantitative approach includes conducting 267 quantitative interviews, and the qualitative approach includes carrying out field observations and mappings. GIS served to support analysis and visualization of empirical information that was generated through this study. By responding to the five research questions, findings and lessons include the following: 1) In the course of time rivers have gained importance in all levels and scales of spatial planning and decision making. Regarding the development of ecological networks, mainly at national scale, rivers are considered significant linear elements. Regarding regional and comprehensive development, river basins and watersheds are often considered as the structural link for strategic ecological, economic, social and recreational planning. For purposes of urban planning, particularly regarding recreational services in cities, the distribution of urban open spaces often follows the structure of river systems. 2) For the purpose of classifying human recreational needs that relate to outdoor open space Maslow's hierarchy of human needs serves as theoretical basis. The classes include geographical, safety, physiological, social and aesthetic need. These classes serve as references while analyzing river and waterfront open space and other kinds of open space. 3) Regarding the question how river and waterfront spatial structures might affect people's recreational activities, eight different landscape units were identified and compared in the case study area. Considering the thermal conditions of Tianjin, one of these landscape units was identified as affording the optimal spatial arrangement which mostly meets recreational needs. The size and the shape of open space, and the plants present in an open space have been observed as being most relevant regarding recreational activities. 4) Regarding the recreational service of urban river and waterfront open space the results of this research suggest that the recreational service is felt less intensively as the distances between water 183 front and open space user’s places of residence are increasing. As a method for estimating this ‘Service Distance Effect’ the following formula may be used: Y = a*ebx. In this equation Y means the ‘Service Distance’ between homes and open space, and X means the percentage of the people who live within this service distance. Coefficient "a" represents the distance of the residential area nearest to the water front. The coefficient "b" is a comprehensive capability index that refers to the size of the available and suitable recreational area. 5) Answers found to the questions above have implications for the planning and design of urban open space. The results from the quantitative study of recreational services of waterfront open space were applied to the assessment of river-based open space systems. It is recommended that such assessments might be done employing the network analysis function available with any GIS. In addition, several practical planning and designing suggestions are made that would help remedy any insufficient base for satisfying recreational needs. The understanding of recreational need is considered helpful for the proposing planning and designing ideas and for the changing of urban landscapes. In the course of time Tianjin's urban water system has shrunk considerably. At the same time rivers and water courses have shaped Tianjin's urban structure in noticeable ways. In the process of urbanization water has become increasingly important to the citizens and their everyday recreations. Much needs to be changed in order to improve recreational opportunities and to better provide for a livable city, most importantly when considering the increasing number of old people. Suggestions made that are based on results of this study, might be implemented in Tianjin. They are 1) to promote the quality of the waterfront open space and to make all linear waterfront area accessible recreational spaces. Then, 2), it is advisable to advocate the concept of green streets and to combine green streets with river open space in order to form an everyday recreational network. And 3) any sound urban everyday recreational service made cannot rely on only urban rivers; the whole urban structure needs to be improved, including adding small open space and optimize the form of urban communities, finally producing a multi-functional urban recreational network.

Process Variability in Micro-Embossing

A promising technique for the large-scale manufacture of micro-fluidic devices and photonic devices is hot embossing of polymers such as PMMA. Micro-embossing is a deformation process where the workpiece material is heated to permit easier material flow and then forced over a planar patterned tool. While there has been considerable, attention paid to process feasibility very little effort has been put into production issues such as process capability and eventual process control. In this paper, we present initial studies aimed at identifying the origins and magnitude of variability for embossing features at the micron scale in PMMA. Test parts with features ranging from 3.5- 630 µm wide and 0.9 µm deep were formed. Measurements at this scale proved very difficult, and only atomic force microscopy was able to provide resolution sufficient to identify process variations. It was found that standard deviations of widths at the 3-4 µm scale were on the order of 0.5 µm leading to a coefficient of variation as high as 13%. Clearly, the transition from test to manufacturing for this process will require understanding the causes of this variation and devising control methods to minimize its magnitude over all types of parts.

Conceptual development of a harmonised method for tracking change and evaluating policy in the agri-environment: The Agri-environmental Footprint Index

An aggregated farm-level index, the Agri-environmental Footprint Index (AFI), based on multiple criteria methods and representing a harmonised approach to evaluation of EU agri-environmental schemes is described. The index uses a common framework for the design and evaluation of policy that can be customised to locally relevant agri-environmental issues and circumstances. Evaluation can be strictly policy-focused, or broader and more holistic in that context-relevant assessment criteria that are not necessarily considered in the evaluated policy can nevertheless be incorporated. The Index structure is flexible, and can respond to diverse local needs. The process of Index construction is interactive, engaging farmers and other relevant stakeholders in a transparent decision-making process that can ensure acceptance of the outcome, help to forge an improved understanding of local agri-environmental priorities and potentially increase awareness of the critical role of farmers in environmental management. The structure of the AFI facilitates post-evaluation analysis of relative performance in different dimensions of the agri-environment, permitting identification of current strengths and weaknesses, and enabling future improvement in policy design. Quantification of the environmental impact of agriculture beyond the stated aims of policy using an 'unweighted' form of the AFI has potential as the basis of an ongoing system of environmental audit within a specified agricultural context. (C) 2009 Elsevier Ltd. All rights reserved.

SPICE: a business process diagnostic tool for construction projects

The construction sector is under growing pressure to increase productivity and improve quality, most notably in reports by Latham (1994, Constructing the Team, HMSO, London) and Egan (1998, Rethinking Construction, HMSO, London). A major problem for construction companies is the lack of project predictability. One method of increasing predictability and delivering increased customer value is through the systematic management of construction processes. However, the industry has no methodological mechanism to assess process capability and prioritise process improvements. Standardized Process Improvement for Construction Enterprises (SPICE) is a research project that is attempting to develop a stepwise process improvement framework for the construction industry, utilizing experience from the software industry, and in particular the Capability Maturity Model (CMM), which has resulted in significant productivity improvements in the software industry. This paper introduces SPICE concepts and presents the results from two case studies conducted on design and build projects. These studies have provided further in-sight into the relevance and accuracy of the framework, as well as its value for the construction sector.

The asymptotic behavior of densities related to the supremum of a stable process

If X is a stable process of index α∈(0, 2) whose Lévy measure has density cx−α−1 on (0, ∞), and S1=sup0x)∽Aα−1x−α as x→∞ and P(S1≤x)∽Bα−1ρ−1xαρ as x↓0. [Here ρ=P(X1>0) and A and B are known constants.] It is also known that S1 has a continuous density, m say. The main point of this note is to show that m(x)∽Ax−(α+1) as x→∞ and m(x)∽Bxαρ−1 as x↓0. Similar results are obtained for related densities.

Manufacturing process challenges when machining superalloys

The implementation of advanced manufacturing systems with high process capability is an essential requirement for the high value manufacturing industries. To ensure high process capability, industry needs to deal with the requirement for tight tolerances and the unavoidable variations in materials, and manufacturing and inspection processes. In the case of machining superalloys, such variations result in the need to change the machine parameters for producing different batches of materials from different suppliers. This is required in order to get the process under control and reduce waste and defects, leading to better competitiveness. This papers discuss the variability in materials and the corresponding process requirements when machining superalloys, and highlights the impact of metrology in achieving manufacturing process improvement.

Processamento sensorial e interacção diádica como promotores de resiliência nas crianças de famílias com baixos rendimentos

A pesquisa sobre resiliência sugere que a criança que se desenvolve em contexto adverso, poderá usufruir de atributos relevantes, pessoais e do ambiente. Neste sentido pretendeu-se estudar, até que ponto, as competências de modulação sensorial da criança e a qualidade das interacções mãe-filho, influenciavam as trajectórias de risco e podiam promover as oportunidades de resiliência da criança. Participaram no estudo 136 crianças, 67 do sexo feminino e 69 do sexo masculino, com idades entre os 7 e os 36 meses. Analisámos a sensibilidade materna em situação de jogo livre recorrendo à escala CARE-Index e o processamento sensorial através do de entrevista baseado no protocolo de Dunn (1997) assente nos quatro padrões de processamento sensorial: baixo registo; sensibilidade sensorial; procura sensorial; evitamento sensorial, construto anteriormente validado. Constituímos, com base nas premissas do modelo de avaliação autêntica, um índex de capacidades, que nos serviu como referencial para a avaliação do risco e da resiliência. Os resultados indicaram que a resiliência infantil em ambiente de pobrezaestava associada a indicadores de elevada sensibilidade materna e a índices adequados de processamento sensorial. A discussão dos resultados enquadrou-se nos modelos actuais e emergentes das influências neurobiológicas e ambientais nos processos de risco e de resiliência.

Reengenharia do processo de reclamações das lojas

Num contexto global de incerteza, as cadeias de abastecimento mais ágeis e os clientes com mais exigências manifestam uma constante preocupação com a melhoria contínua da eficiência das operações logísticas. O presente projeto foi desenvolvido na empresa Sonae Modelo Continente Hipermercados, S.A, uma das duas principais empresas do retalho da grande distribuição alimentar em Portugal. Sendo a logística um fator chave de sucesso, uma das atividades críticas de uma empresa, é identificada a oportunidade de melhoria operacional do processo de negócio, a partir das reclamações dos clientes internos. O tratamento destas reclamações, incidências, é de grande complexidade e responsabilidade para a área do Logistics Customer Service. O projeto desenvolvido, a ‘Reengenharia do processo de reclamações das Lojas’, surgiu da necessidade de criar um modelo e processo de negócio de melhoria contínua, que solucione falhas operacionais com implicação na Logística, Supply Chain e em outras áreas da empresa. A procura dessa melhoria é o objetivo deste trabalho. Pretende-se, com a proposta aqui apresentada, a interligação e automatização da cadeia abastecimento, para superar as ocorrências operacionais, elevar a qualidade do serviço, aumentar a capacidade do processo e incorporar uma monitorização das atividades de input (Lojas) e output (Entrepostos), para futura rastreabilidade das operações, através da integração da cadeia de abastecimento, para a satisfação do cliente interno. Para a elaboração do novo modelo de processo foi seguida a orientação da reengenharia de processos de negócio, nas suas linhas orientadoras: identificação do modelo de processo atual e das suas necessidades; definição dos objetivos norteadores do projeto a apresentar; redesenhar novo modelo de processo de negócio, de modo a dar resposta às necessidades detetadas nos clientes internos.

Medidas Fonológicas em Crianças com Perturbação dos Sons da Fala. Estudo comparativo entre o português europeu e o português brasileiro.

O objetivo deste estudo é comparar as características de dois grupos de crianças com diagnóstico de Perturbação dos Sons da Fala (PSF), falantes de português europeu (PE) e falantes de português brasileiro (PB), considerando um conjunto de medidas fonológicas que incluem Percentagem de Consoantes Corretas (PCC), Percentagem de Consoantes Corretas Revista (PCC-R), Process Density Index (PDI), Índices Absolutos (IA) e Índices Relativos (IR) de Substituição, Omissão e Distorção, tipos de Processos Fonológicos e Percentagem de Acerto por Fonema (PAF). Método: Neste estudo participaram dezoito crianças com diagnóstico de Perturbação dos Sons da Fala (PSF), com idades compreendidas entre os cinco anos e dois meses e os sete anos e 11 meses, sendo doze do sexo masculino e seis do sexo feminino, divididas em dois grupos - falantes de português europeu (GPE) e falantes de português brasileiro (GPB) - emparelhadas por idade, sexo e valor de PCC. A partir da análise das transcrições fonéticas constantes nas folhas de registo de cada subteste de nomeação de cada sujeito - Teste Fonético-Fonológico - Avaliação de Linguagem Pré-Escolar (TFF - ALPE) (Mendes et al., 2009) para o português europeu, e provas de fonologia do Teste de Linguagem Infantil ABFW (Andrade et al., 2004) para o português brasileiro,- foram calculadas e comparadas as medidas fonológicas referidas, recorrendo a testes estatísticos (paramétricos e não paramétricos). Resultados: O emparelhamento do GPE com o GPB foi bem sucedido. Não existiram diferenças estatísticamente significativas nas medidas fonológicas em estudo entre o GPE e o GPB. No Estudo 1, não existiram diferenças nos tipos de erros à exceção do erro de omissão. No Estudo 2, no GPE verificamos um menor número de erros de distorção e um maior número de erros de omissão. Existem algumas particularidades devido à variante da língua, nomeadamente no processo fonológico de PAL e de DESV. Conclusão: Esta investigação permitiu realizar a comparação do GPE e do GPB com a utilização de dois instrumentos recolha de dados diferentes. Os resultados foram de encontro ao que é descrito por outros estudos nesta área de investigação. As poucas diferenças que se observaram podem ser explicadas pelas diferenças existentes entre os sistemas fonético-fonológicos das duas variedades linguísticas. É extremamente importante a metodologia de recolha de dados para a avaliação das PSF. A mais valia desta pesquisa é o contributo de indicadores clínicos para diagnóstico, prognóstico e intervenção terapêutica nas PSF.